Database Develop

couldn't get on 3G after ROM upgrade

Hi,
I have my D810 upgraded to the new HK D810 GPS Enabled Rom
(Rom 1.23.708.4, Radio 1.38.00.11)
and since then my 3G is not working quite right, I can get full bar of 3G, but I just couldn't make a call or recieve any call. And I'm on the Cingular network in the US.
Before I upgrade the rom, I can access the 3G with no problem. Now I can make a call only if I force my D810 to stay on the GSM network (2G).
Can somebody help? Or should I downgrade my rom back to the original dopod D810 rom? If yes, where can I find it?
Thanks.

Try using HTC tweaker to turn off HSDPA, that did the trick for me

Does it mean I can never use HSDPA on my D810 ?

ok, I've disable HSDPA, but it still can't make any call on 3G.....
man... now I hate the new rom... I rather don't have GPS but have my phone working...

have you have checked Start-->Settings-->Phone-->Band Tab--> and ensure that the Network Type is "Auto" or "WCDMA" and NOT GSM? and also ensure that the GSM/UMTS band is set correctly? (now, I'm really nervous about using that ROM!!!)

i have all the Band and Network setting right...
some people from the other forum say it is the network issue from Cingular because they are having the same issue, but on other phones.
it is quite weird, i can make a call under 3G in certain area within Chicago, but anywhere near my work office, it won't work...
And as usual, the cingular cs are useless, they don't even know what is going on

No Service

I am not sure if this the right place for this discussion but I've got a problem and need help. My ATT Tilt works fine in my home service area (3G Network) with 4 bars consistently and drops the connection as soon as I leave it. I've Tweak the setting, stripped the software off except for the basics, hard set the phone, and nothing works. ATT replaced the phone twice but didn't solve the problem. I leave my area and No Service. I travel a lot so this is a major problem. Is there a solution?
WM6.1
ROM Version 3.57.502.2 WWE
Radio 1.65.21.18

hmm not sure if it helps..
I read somewhere that if U turn of 3G and use normal GSM, it might help...
maybe other areas do not have 3G network and only normal GSM networks?

Thanks...I installed "Enable Band Page (Tilt Rom).CAB" and changed the GSM/UMT Band settings. Now the phone works out of area.

and how did you come across that cab file?

Telstra Rom please in the US.

Hey gusy I just got my Aussie HD with 3G on 850mhz but I think I crapped it up. I did a hard spl then went to a custom rom and now I have no 3g when I did before. Can anyone please point me in the right direction.
Thanks,

turcomora said:
Hey gusy I just got my Aussie HD with 3G on 850mhz but I think I crapped it up. I did a hard spl then went to a custom rom and now I have no 3g when I did before. Can anyone please point me in the right direction.
Thanks,
Click to expand...
Click to collapse
it would help if you tell us what custom ROM you used AND if that ROM included a Radio. if it didn't include a radio, you should be ok... also, can you get an internet connection? did try going into Phone->Menu->Options->Band Tab->and select WCDMA for GSM and the 850/1900 UMTS band -> click OK and then see if you get a signal? these answers may help us solve your issue.

OK so I found the telstra rom and what back to it. Still could not get 3G. But with that rom I did at least have the 850mhz as an option under settings, phone, band. I was for sure that Houston had the 850mhz but I could be wrong. So now I am on Rom version: 1:19:831:0 (25581) Radio 1.10.25.25. Let me try changing those settings like you suggested. Is your reception good up there in Dallas?

my reception in dallas depends on my location... at home i usually get a solid EDGE signal. i'll get a stronger 3G signal if i go outside. conversely, here in KC, i have a solid 3G signal everywhere i go. so what ROM did you flash to your phone? and did you flash a Radio ROM as well?

turcomora said:
OK so I found the telstra rom and what back to it. Still could not get 3G. But with that rom I did at least have the 850mhz as an option under settings, phone, band. I was for sure that Houston had the 850mhz but I could be wrong.
Click to expand...
Click to collapse
Not every area in the US is covered by the 3G 850mhz bandwidth by at&t. I wish the online retailers would put. May work in North America. I'm sure if you traveled around the state a bit you would find that your phone gets 3G in some areas.
I also have the option to select 850 and 1900 GSM & 3G in the settings.

AllTheWay said:
Not every area in the US is covered by the 3G 850mhz bandwidth by at&t. I wish the online retailers would put. May work in North America. I'm sure if you traveled around the state a bit you would find that your phone gets 3G in some areas.
I also have the option to select 850 and 1900 GSM & 3G in the settings.
Click to expand...
Click to collapse
May I ask what rom & radio you are using? The original Telstra rom & radio show under settings, phone, options, bands the 850 spectrum and a bunch of different combinations. I hate the tf3d on the telstra rom because it is loaded with all of there carrier stuff but I want 3G. It seems that when I change roms even if I keep the same original radio I lose all those band spectrums under settings, phone, options, bands. What would you suggest?

cortez.i said:
my reception in dallas depends on my location... at home i usually get a solid EDGE signal. i'll get a stronger 3G signal if i go outside. conversely, here in KC, i have a solid 3G signal everywhere i go. so what ROM did you flash to your phone? and did you flash a Radio ROM as well?
Click to expand...
Click to collapse
Well right now I went bacl to the telstra rom & radio because I seem to lose bands if I change rom even keeping radio the same. May I ask what rom & radio you are running?

i'm running Dutty's 2.1 ROM with the new Manila. i had the same thing happen to me: one minute the Band Tab (under phone settings) are there and the next they're gone. there are 2 fixes i use when this happens: (a) simply soft-reset and they appear or (b) use a registry editor to goto HKLM\Software\OEM\PhoneSetting and then change the setting for ShowUMTSBandPage to 1. Sometimes i have to change the other Show****Page seetings as well. right now, my device is set to Auto for BandType and Network Type and i'm getting the H symbol everywhere i go in Kansas City. i know that once i get back to Dallas, the same settings will cause my signal to vasolate between H and E depending on where i am, e.g., at home it will likely be E. if you didn't flash a different radio, you should be ok. like AllTheWay said, you're probably not in an area with a strong 850 3G signal.

cortez.i said:
i'm running Dutty's 2.1 ROM with the new Manila. i had the same thing happen to me: one minute the Band Tab (under phone settings) are there and the next they're gone. there are 2 fixes i use when this happens: (a) simply soft-reset and they appear or (b) use a registry editor to goto HKLM\Software\OEM\PhoneSetting and then change the setting for ShowUMTSBandPage to 1. Sometimes i have to change the other Show****Page seetings as well. right now, my device is set to Auto for BandType and Network Type and i'm getting the H symbol everywhere i go in Kansas City. i know that once i get back to Dallas, the same settings will cause my signal to vasolate between H and E depending on where i am, e.g., at home it will likely be E. if you didn't flash a different radio, you should be ok. like AllTheWay said, you're probably not in an area with a strong 850 3G signal.
Click to expand...
Click to collapse
I really appreciate the help. I am going to try to dutty's rom right now. His rom does it come with a radio? I will install phm reg edit and try that fix also. Thanks alot man, I will post my results.

turcomora said:
I really appreciate the help. I am going to try to dutty's rom right now. His rom does it come with a radio? I will install phm reg edit and try that fix also. Thanks alot man, I will post my results.
Click to expand...
Click to collapse
no, Dutty's 2.1 ROM does not come with a radio. what ROM did you flash that cuased the BandPage to disappear?

I used the newest wwwe shipped rom. But the used udk's custom RUU and placed the nbh file from the old radio back into it.

Hey guys, I am considering getting the telstra version HD soon, I was just wondering what do I need to do to set up the phone for ATT, or is it good to go out of the box?
Also will all the phone features function normally with ATT? Thanks for any input.
Also wondering if i have read this thread correctly, as long as I do not change the radio and only upgrade the ROM after HardSpl, then I should keep the 850mhz 3g?

Same here I have a european version of HD. What do I need to install to get the 850 3G on ATT ? please advice

daraj said:
Same here I have a european version of HD. What do I need to install to get the 850 3G on ATT ? please advice
Click to expand...
Click to collapse
you need another phone, a.k.a., the Telstra Touch HD. you will not be able to get 850 3G with the UK version of the Touch HD.

the telstra hd (T8285) is good to go on AT&T and Tmobile in the US....
straight out of the box...
another question i have is that i have the EURO HD. (t8282)..
in the BAND TAB (under phone settings) i have the options
UMTS (850 +1900) +GSM (850+1900)
does this mean that my phone will get 3g on an 850 MHZ network?
like AT&T or telstra in australia?
cheers

cortez.i said:
you need another phone, a.k.a., the Telstra Touch HD. you will not be able to get 850 3G with the UK version of the Touch HD.
Click to expand...
Click to collapse
Can you point me to a good place or website to purchase the Aussie version because I I see online is the Euro version.

daraj said:
Can you point me to a good place or website to purchase the Aussie version because I I see online is the Euro version.
Click to expand...
Click to collapse
here you go..
http://cgi.ebay.com.au/HTC-Touch-HD-T8282-T8285-Telstra-US-8-GB-Micro-SD_W0QQitemZ280322363132QQcmdZViewItemQQptZAU_Mobile_Phones?hash=item280322363132&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A1308

Best ROM for T8285 on AT&T ?

I have tried every single ROM here, but sometimes when I try to answer a call the phone gets stuck.
The phone does it mostly on 3g mode, when i switch to GSM everything seems to work normally.
AT&t 3g is 850mhz here in Miami, I get 1.53mbps download speed but cant handle simple calls.
Is there a fix for this?
Thanks

EF7 said:
I have tried every single ROM here, but sometimes when I try to answer a call the phone gets stuck.
The phone does it mostly on 3g mode, when i switch to GSM everything seems to work normally.
AT&t 3g is 850mhz here in Miami, I get 1.53mbps download speed but cant handle simple calls.
Is there a fix for this?
Thanks
Click to expand...
Click to collapse
All I can say is I have tried Dutty's 6.5, Miri's 6.5 and energy rom 6.5 and they all do it. I have tried 4 different radios and its still a problem. I hope someone on here can help because a phone that you cant answer calls with is real frustrating

Duttys 6.1 Turbo X didn't do it, but had issues with the SMS feature.

EF7 said:
I have tried every single ROM here, but sometimes when I try to answer a call the phone gets stuck.
The phone does it mostly on 3g mode, when i switch to GSM everything seems to work normally.
AT&t 3g is 850mhz here in Miami, I get 1.53mbps download speed but cant handle simple calls.
Is there a fix for this?
Thanks
Click to expand...
Click to collapse
What Radio are you using? I had a very similar problem before I flashed a new radio.

I've been running Dutty's 6.5 R8 ROM & Radio since I got my phone last week and its been flawless on 3G in my area.

turcomora said:
What Radio are you using? I had a very similar problem before I flashed a new radio.
Click to expand...
Click to collapse
Ive tried all the Radios available on xda, same problem with all of them.
rotohammer said:
I've been running Dutty's 6.5 R8 ROM & Radio since I got my phone last week and its been flawless on 3G in my area.
Click to expand...
Click to collapse
Might be an AT&T issue in my area, love the phone but dont know if I can keep it like this.

EF7 said:
Ive tried all the Radios available on xda, same problem with all of them.
Might be an AT&T issue in my area, love the phone but dont know if I can keep it like this.
Click to expand...
Click to collapse
I am using 1.14.25.24 with the dll cab and my phone qulaity is excellent. Before this radio I was getting crappy reception, losing signal in areas of good strength. I also have my phone settings to WCDMA, GSM (1900 + 850) + UMTS (1900 + 850). Good luck.

turcomora said:
I am using 1.14.25.24 with the dll cab and my phone qulaity is excellent. Before this radio I was getting crappy reception, losing signal in areas of good strength. I also have my phone settings to WCDMA, GSM (1900 + 850) + UMTS (1900 + 850). Good luck.
Click to expand...
Click to collapse
I tried the band setting you mentioned, no luck. My signal is excellent everywhere I go, the problem is just when I answer calls.
I'll keep on flashing roms until I find one that works properly

have you guys tried different SIM cards to see if that may be causing the problem? if the problem doesn't occur in GSM mode, it might be signal related (i know i'm reaching here... using the process of elimination method). your respective delimas are perplexing.... i know this doesn't help, but i've had my device since March 09, live in an area where 850 3G coverage is not that strong, flashed a buttload of ROMs (4 this week) and 2 different radios and i (knock on wood) haven't encountered similar issues. you might consider flashing the latest Telstra ROM from HTC. don't know if it was leaked earlier, but based on the website the ROM was released on 7/23/09.

Same problem with my bothers SIM (also AT&t) Im going to request a new SIm and see what happens.
Im gonna try the telstra ROM, hopefully its better looking than the one that came witht he phone. Thanks.

I don't have another sim to try but I have also tried different radios and the problem remains. I did notice for whatever reason, Miris manila 2.5 rom with the "data connection" set to off but the "3G" set to on doesn't have the issue and sill works on 3G. I always thought "data connection" and "3G" had to both be on but it works. I tried the same method in the energy 6.5 rom but it doesn't let me configure the connection that way

Flashed Duttys 6.5 R9
Data Connection is OFF
3g Connection is ON
1.14.25.24 Radio
Phone Network Settings: Type AUTO GSM/UMTS Band: 1900 + 850
I'm testing it now, it seems to be working properly

The problem is still there, don't know what to do anymore

all of the sudden mine doesnt do it anymore, I have been using Dutty's R9 rom and Miri's 6.5/2.5 rom and every call can be answered fine. I happened to catch one of the "phone review" guys on youtube say that he has been having "call on the 3G network" issues but edge was working fine. He is in San Fran ( 2.5 Hours from me) so maybe it was/is a network issue???

Flashed Duttys 6.5 R9
Hard Reset
Installed Rilphone.dll
Turned phone off
Enter bootloader
Flashed 1.14.25.24 Radio
Soft Reset
Data Connection is OFF
3g Connection is ON
Phone Network Settings: Type WCDMA - GSM/UMTS Band: 1900 + 850
it has been working flawlessly for 2 days now.
I believe that the radio was flashed incorrectly the first time, it looked like it was successfully installed.

Closing thread as solution and rom flashed

ATT tilt has no signal in 3G area

hello all, this is my first post here.
I do NOT have a data connection package on this phone (i don't know if this effects it or not), but whenever i go into a 3G area my phone loses signal and gets none whatsoever. I only get signal where there is an Edge connection. I purchased this phone used so there is no warranty or anything. Ive taken it to [email protected] and they say that the only thing i can do is buy a new phone , but i love my phone. Is there anything i can do to fix this?

Flash a different ROM. My roms in the sig are TILT roms and will work in 3G and HSPA using ATT in Houston. Just make sure you get the connection settings right. The problem with your connection cutting out has to do with a combo of the ROM and the radio.

what are the right connection settings? and do i need a new radio? which radio would work?

adrian_land said:
what are the right connection settings? and do i need a new radio? which radio would work?
Click to expand...
Click to collapse
Go here. And read the Guides section for the radio and how to flash, most roms require you flash the stock one on there first so go to HTC->support>choose your product->download the latest rom image, it should be like 119mb or bigger. For the settings, do a search on here for ATT connection cab. it will set up the connection without you doing anything. if you can't find it I'll see if my friend can post it somewhere.