Database Develop

Auto edge/data connect

Hello all,
A/
I just noticed my Diamond auto-enables a data connexion when TF3D launches, and I would like to know if (1) it's a standard behaviour (2) it's possible to disable it.
I've noticed that after having installed the TF3D configuration (very nice) tool, so I don't know if it's linked to that or to another program installed on my device.
Since I d'ont have a data option yet in my contract I'd love to disable that automatic connexion
B/
I have the Orange TF3D theme installed, and I kinda like the fell of it. I'm sure it will be possible in a near future to change the look'n fell (Icons, Colors and such) of TF3D, perhaps in a new version of the (amazing) configuration tool. But what bugs me in Orange's skin is the clock. Do you know a way to get the standard TF3D clock back ?
C/
Is it possible to add tasks on the home screen under the clock ? I can see that on screen captures from the standard TF3D screen, but I never managed to do that... I suspect the Orange theme to interfere. Any idea ?
Anyway, great work here all, I intend to come a lot to this forum in the next monthes
Thanks !

http://forum.xda-developers.com/showthread.php?t=406440
Start reading on the BATTERY labeled section.

Yes, I know how to disable the data flow, but will it disable the data flow autoconnect at TF3D startup ? It should autoconnect only if required, but... Well, what would require it ?

OK, nice, edge de-activated and phone still calling... That problem is solved, thanks !
Any ideas for the remaining ?

Ximoon said:
Yes, I know how to disable the data flow, but will it disable the data flow autoconnect at TF3D startup ? It should autoconnect only if required, but... Well, what would require it ?
Click to expand...
Click to collapse
Yes modifying the auto attach with Schaps advanced configure (great app by the way) Will disable it to auto start on boot. So you will get the grey icon indicating data flow completely off when you boot your Diamond.
It will connect when you ask for email check or weather check for example. Basically any app that needs internet access will activate it. Unless of course you are connected to a wifi AP.
Hope it helps Lucks!!!!

Yes, works fine !
Now, I'll find a way to change that clock, but I don't want to change the Orange skin, I kindof prefer it to the default HTC black one.

Ximoon said:
Hello all,
B/
I have the Orange TF3D theme installed, and I kinda like the fell of it. I'm sure it will be possible in a near future to change the look'n fell (Icons, Colors and such) of TF3D, perhaps in a new version of the (amazing) configuration tool. But what bugs me in Orange's skin is the clock. Do you know a way to get the standard TF3D clock back ?
Thanks !
Click to expand...
Click to collapse
please up orange skin.. thanks

Do a search, I think you'll find it here.
maxtreme said:
please up orange skin.. thanks
Click to expand...
Click to collapse

i didn´t search it :-( pleas help

Alternative phone dialer skin? (must be VGA of course)

Disabling the dialer skin on the Diamond made me gain 10MB RAM and made the device much more responsive.
But, it also decreased the visual quality considerably. Default WM phone skin is ugly.
My question is, is there a way to install a skin that looks better and still does not waste much RAM?
I remember trying many dialer skins on my original Touch, but none of them were VGA.

i am interested in a new phone dialer. I installed some dialer in my htc p3300 and run very well, including the smartdialing. it would be possible to install a new phone skin dialer with the old smartdialing to the diamond?, i think the only problem is to find one with smartdialing, vga grafics and videocall.
thank you.

There are dialers with smart dialing, but so far none for VGA.
I'm surprised more people aren't interested in an alternative considering the default dialer takes 10MB RAM for nothing.

also looking for a phone skin that is vga for diamond. i too felt my device runs better with the diamond phone dialer disabled, but would like a different look to the windows version.
many thanks

Looking for subj, too

Wow - 10 mb. Thinks i shall disable mine...

Here, not sure if it helps but skins for standard wm 6 dialer. One looks just like it was made for diamond (remove the $ signs) 4$p$d$a.ru/forum/index.php?showtopic=78093&st=450
Removing the diamond dialer will also disable the incoming call screen?

Yup, this disables the incoming call screen too. Would really like a new dialer skin

Where does the 10mb come from?
Graphics? Can we not compress these graphics so when the phone is about to ring, it doesnt have to load up as much graphics etc. Might make it more responsive to incoming calls.
If the 10mb is from extra functionality then i suppose were stuck unless theres another dialer.
Is there a VGA skin for S2u2? i always use to use the incoming call screen from s2u2
So how about disabling the diamond dialer skin, and using a skinned s2u2 incomg call screen? Then im sure theres a standard dial pad skin to look like the diamond.
So vga diamond lookalike s2u2 skin??

I've tried all the phone dialers I found with google... nothing worked so untill HTC makes a good phone dialer with no 3 sec delay I'll stick with the default windows dialer and with a tweak the 3 sec is gone (only with wav files)

vibecatalin said:
I've tried all the phone dialers I found with google... nothing worked so untill HTC makes a good phone dialer with no 3 sec delay I'll stick with the default windows dialer and with a tweak the 3 sec is gone (only with wav files)
Click to expand...
Click to collapse
could you explain this tweak please? I have tried so many dialer/skin combos for VGA Wing and it drives me nuts that even at XDA there is no great dialer available.
I'm looking for large keypad and something other than black-this, black-that. I've seen the manilla dialer skins but they don't work too well for vga. but still, as for dialer software itself, I too add my name to this list of people still wishing to find an alternative.

There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer

vibecatalin said:
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
Click to expand...
Click to collapse
disable diamond phone dialer will disable video call too..thats not a good idea

vibecatalin said:
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
Click to expand...
Click to collapse
The tweak also works with the HTC dialer.
http://forum.xda-developers.com/showthread.php?t=419333

chasist said:
disable diamond phone dialer will disable video call too..thats not a good idea
Click to expand...
Click to collapse
Well, I am using video calling quite ...
...
never

Disabling the phone skin also disables being able to raise or lower volume during calls.

that figures , have been trying to figure out how to do that ...

You can remove the HTC Volume Control with this cab here:
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
This will allow you to change in call volume again.
I too am looking for skins for the standard WM6 dialer - the default grey is ugly.
I found this thread with some skins that are perfect, but they're all QVGA...
http://forum.xda-developers.com/showthread.php?t=295951
Has anyone been able to find any VGA skins?

how to disable the htc dialer?

BelugaHval said:
how to disable the htc dialer?
Click to expand...
Click to collapse
You can do it with Diamond Tweak or Schaps Advanced Config. The Volume control needs the cab linked above.

Ringtone Manager for WM6.1 (Diamond)

Hi there,
is there someone with a ringtone manager working?
I've already tried the last versions of mRing and Ringo, with no success.
mRing, doesn't work
Ringo, works but i can't mute incoming calls :\\
Open to suggestions, this topic can help alot of users with this issue.
Thanks all.

No one uses ringtone manager on your Diamonds??
Thanks

rockas said:
No one uses ringtone manager on your Diamonds??
Thanks
Click to expand...
Click to collapse
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers

I am using Photo Contacts Pro. This comes with Ring Manager, SMS contact rings as well as profiles.
Works well for me.

It looks interesting...
I didn't know that software...
To customize sms, it should be perfect
http://www.pocketx.net/products/photocontactspro_ppc/index.html

unvisigoth said:
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers
Click to expand...
Click to collapse
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?

rockas said:
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?
Click to expand...
Click to collapse
Yes it does. My version is 4.03. The inital screen seems a little bit confused but it seems work well. Try do disable phone skin and try mring again. Disabling phone skin you gain about 10 MB of free ram. If you like the skin that comes with the diamond try to disable it and use S2U2. It's better, lighter, and with a lot of settings.
Cheers

where can i get S2U2?
http://forum.xda-developers.com/showthread.php?t=381588
thanks for the help

I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers

Problems with Photocontacts Pro with Diamond
biggggant said:
I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers
Click to expand...
Click to collapse
Hi! Also I have , not one but a lot of issues with the Photo contacts Pro in my Diamond. I really thing that it does not work with that device.
First I installed the last version 5.09 and had a lot of problems (rings, answering the calls, Extended menus of the Today's Plug-in,.....). Wit the older version 5.08 it seems that works a little better, but the Today's plug-in has some very big text, wich make the Today's Screen a real mess.
Best regards!

Simplest One
Use this freeware to add custom ringtones to contacts/ categories etc.

mine had stopped working after a soft reset following changing the registry location to the sd card so am very pleased to have found such a small app that assigns individual tones to contacts, thankyou

Request: Add "No wakeup on keyboard slide"

I miss this function in the Fuze Tweaks as well as Schaps Adv. Cfg. Is there a hack to prevent the Fuze from waking up?

tyguy said:
I miss this function in the Fuze Tweaks as well as Schaps Adv. Cfg. Is there a hack to prevent the Fuze from waking up?
Click to expand...
Click to collapse
I would love to see an answer to this.
The tweak for fast phone sleep on call is gone too. I am guessing because of the proximity sensor?
Id also like to have the ability for the screen not to activate on call. Mine keeps answering when i remove it from the case.

found it here: http://forum.xda-developers.com/showthread.php?t=443895
Add this key to yr registry
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0
this should get into diamond tweak and advance config as it was on previous versions as kaiser tweak and advance config 2...

at10ti0n
YOU ROCK... WORKS!!!!!!!!!
Great find - Thanks.

at10ti0n said:
found it here: http://forum.xda-developers.com/showthread.php?t=443895
Add this key to yr registry
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0
this should get into diamond tweak and advance config as it was on previous versions as kaiser tweak and advance config 2...
Click to expand...
Click to collapse
It worked on my Tilt2, had to add/make the "SlideWakeup" line/command.

Vibrate to Connect in 6.5

is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom

Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.

TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.

GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.

AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..

neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.

that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?

Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal

beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you

didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?

The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset

I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.

Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks

i have the same problem and i would like to know how to fix it ..
thanks all

-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee

The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_

hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.