Hello
Is it possible to have a blank wm6 without all of the customization that HTC add to the diamond eg WM dialer, wm keyboard WM sound control.
Thank you
Could u repeat the question??? in a elaborate manner cause i didn't understand it all.....
I think he wants a clean boot...
I once had a E-ten X500+ and when you hard reset it you could stop the E-ten programs installation by pressing a button during the installation process, so you had a clean WinMo device without the E-ten apps.
Just soft-reset your device when the customizing starts....
Wow I haven't thought of that...
But does that mean you don't have the touchflo3d too? I really don't need that. Also is it safe to do that because you could mess up your device, not???
Hi Whitefalcon This what I meant,
1-without the touchflo addition
2-With windows mobile pop out sound bar when i press up/down volume button, not the annoying black system volume/phone volume.
3-without annoying grey text preview stripe above when i type.
4- With windows Internet explorer (eg without Opera)
thanks and have very nice day.
Thank you so much ChiefmasterB'
Soft reset during customization worked fine although it was tricky timing when to press.
If you still know other ways it would be good to hear.
Thank you for the tip, I didn't know that it is possible.
Cheers
luke332 said:
Thank you so much ChiefmasterB'
Soft reset during customization worked fine although it was tricky timing when to press.
If you still know other ways it would be good to hear.
Click to expand...
Click to collapse
So can you tell us exactly when to soft reset? Maybe a screen shot of the exact time to soft reset... That would be handy...
luke332 said:
Hi Whitefalcon This what I meant,
1-without the touchflo addition
2-With windows mobile pop out sound bar when i press up/down volume button, not the annoying black system volume/phone volume.
3-without annoying grey text preview stripe above when i type.
4- With windows Internet explorer (eg without Opera)
thanks and have very nice day.
Click to expand...
Click to collapse
Sounds like you need a clean ROM.
Panosha Simple 1.1 is all the things you have mentioned. It does include the Diamond dialer but it is easy to disable.
Related
On my old ETEN M600 (RIP) I had a phone pad app/skin that gave me big buttons and when a dial button was pressed the phone vibrated for a 1/4 of a second. It was great physical feedback to feel that little blip when a button was pressed and I believe it allowed me to dial numbers quicker. Anyone know of a app that enables this for the Tilt/Kaiser?
And yes I did a search for this before I posted a new thread.
Thanks
OT
How to set up one button press on/off with device and screen locked
Also for those that are interested. I have AE Button Plus, Ilauncher and DeviceLock by Matt Armstrong installed on my Tilt. The combination of these programs allow me to program the left softkey to turn off the Tilt. Matt's Devicelock auto locks the phone and prevents any other buttons to be pressed. When I want to use the phone I can press the left hard key that corresponds with the left soft key and that turns on the phone and unlocks it with one button push. This set up gives me one button off/on and all other keys and the screen is locked from accidental button pushes. Now I just wished that Devicelock would shut off the phone after 10 seconds if not unlocked. Right now my phone is in my pocket and if I accidentally push any button other then the left hard key my screen will turn on in a locked state and time out only after 1 minute if no other buttons are pressed. I would like it to turn back off faster.
BTW Thanks Matt
Not an app but it can be done with registry tweaking:
[It involves modifying registry keys so beware].
Navigate to HKCU\ControlPanel\Sounds\
In here there are a bunch of keys named Dtmf which represent all the keypad keys [0-9, #, *]
Rename Standard DWORD parameter Sound to Sound1
Create new String Parameter Sound
Assign value *vibrate* to this new parameter.
Save and exit, test it, then go back and do the same for all your keys, sorted.
A .cab for this?
Is there a .cab floating around for these reg settings?
It would be a great contribution to the community if someone could whip up a cab to make these reg changes ;-)
Wow, now that was usefull. I had installed some small prog to do the same, but it didn't work great. It wouldn't vibrate unless you pressed for a more than 250 ms. This mod vibrates immediately! Thanks!
someone should tell Kaisertweaks that that needs to go in
Here you go, working great on the TyTN II
That's what I'm talking about
Gizmo5148 said:
Here you go, working great on the TyTN II
Click to expand...
Click to collapse
Thanks Gizmo!
I love this place. Where would WinMo be without xda-developers???
Any chance you could upload the .cab directly instead of zipped? For some reason it won't extract on my tilt and I can't get to a PC tonight.
Thanks again.
Sure thing, here you go
Installed and it is working great. This is really a great tweak!
aren't dtmf tones what are used for things like voicemail and such? like "press 7 to delete" it recognizes the sound? does this affect that at all?
I don't think this tweak has any effect on dtmf tones. I just tried my VM and everything worked as usual.
strange...i installed this on my tilt (htc rom) and when i touched a button there was no vibrate, until about 5 seconds later, it was delayed i guess, and after that i never felt another vibrate, even after a few resets.
bump.
would like to get this working.
Will this make it beep and vibrate or just vibrate? It would be cool it it could do both at once!. Also, maybe post cab to revert back to just the sound in case anyone wants to change it back?
Mikeeey,
Try holding the number down a little longer. If you just touch it, it will display the number but not vibrate.. I had the same trouble also.
I do appreciate the afford, but shouldnt it just work when it notices a keypress, not a long keypress.
You have to hold it for a little time. Thats how it works
Gizmo5148 said:
You have to hold it for a little time. Thats how it works
Click to expand...
Click to collapse
That's how the cab file works. But when I did the registry edits as listed in the 2nd post, then it is an immediate vibrate. I used to use the cab file version. I removed that and went with the direct reg edits. Now it vibrates immediately.
jomo25 said:
That's how the cab file works. But when I did the registry edits as listed in the 2nd post, then it is an immediate vibrate. I used to use the cab file version. I removed that and went with the direct reg edits. Now it vibrates immediately.
Click to expand...
Click to collapse
Same here, works great after manual reg edit.
dalewinterstein said:
Mikeeey,
Try holding the number down a little longer. If you just touch it, it will display the number but not vibrate.. I had the same trouble also.
Click to expand...
Click to collapse
thanks for pointing that out dalewinterstein, it works for me now.
i did the manual reg edit to try and make it respond faster but it doesnt, actually the keys lighting up after being pressed dont respond fast enough to my presses, does this happen for anyone else? i mean if i hold it just a bit longer it will light up and vibrate but im normally faster than that.
hello all, i have a couple requests (most likely has to do with registry editing)
1: Hide the top bar (time, and stuff)
2: Have a big invisible x button to close programs (no need for stylus)
3: Hide bottom bar (calendar/contacts) but still be able to use the soft keys to access them
thanks a bunch in advanced
nice request
those are some nice request. but if someone even tries to cook this rom then we should think of giving them a donation for their work dont you think?
persianprez said:
hello all, i have a couple requests (most likely has to do with registry editing)
1: Hide the top bar (time, and stuff)
2: Have a big invisible x button to close programs (no need for stylus)
3: Hide bottom bar (calendar/contacts) but still be able to use the soft keys to access them
thanks a bunch in advanced
Click to expand...
Click to collapse
As taken from my guide:
Can I get rid of the "Contacts / Calendar" bar?
Dcino Bar is a great app to get rid of it. Simply place this app in your Windows/Startup folder, you can download it Here
Click to expand...
Click to collapse
you can still use the keys on the phone to access the "contacts or calendar"
thx a lot tyler, it worked great, is there anyway to make it invisible for all programs as well?
One of the Rom Cookers need to keep these ideas in mind...
Maybe have a version out which is fully powered by the touch cube and pocketCM default. Its becoming more smoother to use as a regular phone and I can see my calendar on the main screen!!!
i actually prefer a software solution rather than loading a new rom
megaman81 said:
One of the Rom Cookers need to keep these ideas in mind...
Maybe have a version out which is fully powered by the touch cube and pocketCM default. Its becoming more smoother to use as a regular phone and I can see my calendar on the main screen!!!
Click to expand...
Click to collapse
The author of pocketCM asks that it not be included in ROMs.
Ugh... yes! I want a big x button so I don't have to turn my finger and slide it up in the corner to hit the x.
WM5 on the older PALM devices have the X button moved to the left so it's not up against the edge; can we do that on the thing by editing the registry somehow?
kraftey said:
Ugh... yes! I want a big x button so I don't have to turn my finger and slide it up in the corner to hit the x.
WM5 on the older PALM devices have the X button moved to the left so it's not up against the edge; can we do that on the thing by editing the registry somehow?
Click to expand...
Click to collapse
finally some1 who feels my pain lol, taking out the stylus just to hit the x annoys me
bump, still want that big invisible x =]
Maybe this will help:
http://forum.xda-developers.com/showthread.php?t=386378
Or papamopps rom... been using it for the past week and love it.
http://forum.xda-developers.com/showthread.php?t=396036
kraftey said:
Ugh... yes! I want a big x button so I don't have to turn my finger and slide it up in the corner to hit the x.
WM5 on the older PALM devices have the X button moved to the left so it's not up against the edge; can we do that on the thing by editing the registry somehow?
Click to expand...
Click to collapse
I use FTouchSL to do this. I made the top left active corner a close option so it closes the application thats open. You can set how many pixels it is & the amount of time it takes to activate. It works perfectly
Beast84 said:
I use http://www.ftouchsl.com to do this. I made the top left active corner a close option so it closes the application thats open. You can set how many pixels it is & the amount of time it takes to activate. It works perfectly
Click to expand...
Click to collapse
This looks really tight, ima try it out, I dont feel like going through the whole rom thing again, im sticking to manufacturer settings, although i might change the pool size thing again
When using touch flow 3d, I keep on selecting things, rather than scrolling. Eg. if scrolling through people, rather than scrolling to the next person, I keep on actually selecting the person I was on. Is there ay sort of registry fix which will help with this?
Thanks
i don't know if there is a registry tweak for this but i had the same problem in my first couple of days with my diamond. all you have to do is practice a lot and you'll get the right movement of your thumb
I had the same problem, but after installing the new Swiftblade Rom it all went better its like the other ROM is too slow so that it forgets your thumbs is on the screen and then it just opens a Program.. all these problems totally disappeared with Swiftblade 6.0
Try this:
realign your screen, but barely touch it! just pres SUPER SOFT just hard enough to make the crosses react.
Then try scrolling again
Riel said:
Try this:
realign your screen, but barely touch it! just pres SUPER SOFT just hard enough to make the crosses react.
Then try scrolling again
Click to expand...
Click to collapse
Thank you so much - this did the trick! When I originally configured it, I remember pressing down really hard - this time I pressed down as softly as possible, and it resolved the problem!
Thanks again!
Hello guys,
This forum is awesome, it is like make a a wish, and it comes true
now I have a question, the battery status has a great feature of showing the CPU load under the clock on the top bar. thru that i can really see if the device busy doing something!
but this is working only when I disable the TF3D. does anyone know how to get that working with the TF3D?
is it also possible to have the other indicator of battery status, they were very useful. The TF3D is taking the whole screen leaving no space for anything else
cheeers!
as far as i know what you want isnt possible... sorry...
until someone comes up with a modification of tf3d that is...
but until then i`m afraid you must look onto alternatives..
for example:
what i did:
installed mortscript, making it able to run scripts..
installed a script wich made it swap between tf3d and today.
bound a hardkey to this script, whenever i hold down this key is promts me the question to change, if i want, i click ok, and it shuts down tf3d and goed to the original todayscreen... holding this key again it does the opposite.. thus starting tf3d...
now ive got the best of both worlds...
i like this solution far more then secondtoday, this way its even frees up ram because the manilla.exe is really shut down..
all plugins like homescreen++ (formely batterystatus) stay active this way... unlike when you just untick the tf3d in "items" wich will leave yoe with a blank today over and over..
thank you for ur answer, that is also takes time to switch between both applications, the niche thing in the battery status, is just one can see system status without pressing anything!
@ Make a search for " FinixNoverBattery.Cab";see here.
It shows you the status of the Battery and your connection.
greetz
pego2007
pego2007 said:
@ Make a search for " FinixNoverBattery.Cab";see here.
It shows you the status of the Battery and your connection.
greetz
pego2007
Click to expand...
Click to collapse
yes treu,
but it doesnt show any other information that was already shown in tf3d. only a more precise indicator for the batterystatus..
only way i could think of would be seriously changing the tf3f itself to show some stats... maybe a exta tab could be made by someone...
quark1980 said:
as far as i know what you want isnt possible... sorry...
until someone comes up with a modification of tf3d that is...
but until then i`m afraid you must look onto alternatives..
for example:
what i did:
installed mortscript, making it able to run scripts..
installed a script wich made it swap between tf3d and today.
bound a hardkey to this script, whenever i hold down this key is promts me the question to change, if i want, i click ok, and it shuts down tf3d and goed to the original todayscreen... holding this key again it does the opposite.. thus starting tf3d...
now ive got the best of both worlds...
i like this solution far more then secondtoday, this way its even frees up ram because the manilla.exe is really shut down..
all plugins like homescreen++ (formely batterystatus) stay active this way... unlike when you just untick the tf3d in "items" wich will leave yoe with a blank today over and over..
Click to expand...
Click to collapse
Hey man
Sounds great.
Can you post the script please
I dont really understand why the TF3D is blocking the indicators of the battery status under the clock on the upper taskbar, they are shown on the top of all windows, not only on the today screen. iam here concerned in the CPU load indicator?
Check
http://forum.xda-developers.com/showthread.php?t=401907&highlight=secondtoday
That will be do the trick allowing you to INSTANT-change between tf3d and "normal" today.
The first time you open it all today plugins must be loaded so it takes a little more time (like 4 seconds in my diamond... but the time depends on the number of plugins u want to load) ... but after first load the change takes 0 seconds... u can use a mapped hardware button or through your "most viewed" apps (big icons) in the start menu .... or whatever way ....
I'm using it in my diamond and works perfect !
By the way ... the creator of secondtoday is the same as batterystatus
sorrowt said:
I dont really understand why the TF3D is blocking the indicators of the battery status under the clock on the upper taskbar, they are shown on the top of all windows, not only on the today screen. iam here concerned in the CPU load indicator?
Click to expand...
Click to collapse
They are not talking about seeing the status of their battery, they're talking about displaying a software called 'batterystatus' on their today screen
TFT3D & Battery Status
The software batterstatus `now renamed to homescreen plus plus.
With secondtoday and homescreen ++ you can show several systemparameter eg. battery,temperature,hd etc. (see my attachments)
you can find the program here:
http://www.chi-tai.info
greetz
pego2007
pego2007 said:
The software batterstatus `now renamed to homescreen plus plus.
With secondtoday and homescreen ++ you can show several systemparameter eg. battery,temperature,hd etc. (see my attachments)
you can find the program here:
http://www.chi-tai.info
greetz
pego2007
Click to expand...
Click to collapse
Hi bro, I'm quite interested in the batterstatus app. does it compartible to Omina phone? Me actually looking for green battery fix and I don't really like FInixNOver VGA Battery ....cos not really compartible to Omina...Hope bro u can help me...
ok i installed the SecondToday with the homescreen++, and ---> AWESOME!!!
guys u r great thank you
Thats a message from a omnia900 user to ikarus(chi-tai).
I am using your wonderful program on my Samsung i900 omnia. But have the following problem.
In the settings for second today I assign the right soft key to SecondToday. Then I click on Apply to Registry. This works fine and I can toggle between my first and second today screen using this soft key.
You can find more in his forum,see attachment.
pego2007 said:
Thats a message from a omnia900 user to ikarus(chi-tai).
I am using your wonderful program on my Samsung i900 omnia. But have the following problem.
In the settings for second today I assign the right soft key to SecondToday. Then I click on Apply to Registry. This works fine and I can toggle between my first and second today screen using this soft key.
You can find more in his forum,see attachment.
Click to expand...
Click to collapse
Thank u bro so meaning this wonderful programme works fine with Omina
Btw I dont understand " But have the following problem. In the settings for second today I assign the right soft key to SecondToday. Then I click on Apply to Registry. This works fine and I can toggle between my first and second today screen using this soft key. " What does it mean sorry I'm new to Pocket PC phone hope bro u can guide me slowly. Thank u so much.
Bro Pego2007,
There are too many of this app in that website which one shall I choose ?? Really sorry abt this as I'm new to this sorry ...
On this side from chi-tai :http://www.chi-tai.info/discuss
you can find all answers of your question, or make a search for ikarus(nickname of chi-tai) on xda-developers.You can also make a search for homescreen plus plus on xda-devs.
greetz
pego2007
I know this is probably the dumbest question ever, but I had WM 6.1 and could change the volume by simply pressing the little volume icon on the top bar..now I upgraded my phone with a rom to WM 6.5 and whenever i click that icon it just goes to notifications and theres nowhere to change the volume profile! and I seriously googled the issue like nobodys business, I don't know if this is normal for 6.5 or what! the only way i can change the volume profile is using touchflo, going to settings etc. and that sometimes takes way too long when i want a quick shortcut to change the volume asap! and if i don't want to use touchflo, theres no way to change it!
so, basically, if any of you kind people can let me know...is it normal first off for WM6.5 to not let you click the volume icon on the top start menu?
and if it is a bug..do you know how i could fix it? is it possibly a rom bug? should i flash a new rom?
sabzi43 said:
I know this is probably the dumbest question ever, but I had WM 6.1 and could change the volume by simply pressing the little volume icon on the top bar..now I upgraded my phone with a rom to WM 6.5 and whenever i click that icon it just goes to notifications and theres nowhere to change the volume profile! and I seriously googled the issue like nobodys business, I don't know if this is normal for 6.5 or what! the only way i can change the volume profile is using touchflo, going to settings etc. and that sometimes takes way too long when i want a quick shortcut to change the volume asap! and if i don't want to use touchflo, theres no way to change it!
so, basically, if any of you kind people can let me know...is it normal first off for WM6.5 to not let you click the volume icon on the top start menu?
and if it is a bug..do you know how i could fix it? is it possibly a rom bug? should i flash a new rom?
Click to expand...
Click to collapse
try it with the HTC equalizer or SRS WOW HD to fix
SetVolume
Here's a nice and handy volume changing tool:
http://forum.xda-developers.com/showthread.php?t=395695
You can assign it to one of the hardware buttons (I personally have it assigned to the top voice command button as I don't use voice dialling) and it makes changing volume easier than ever.