When using touch flow 3d, I keep on selecting things, rather than scrolling. Eg. if scrolling through people, rather than scrolling to the next person, I keep on actually selecting the person I was on. Is there ay sort of registry fix which will help with this?
Thanks
i don't know if there is a registry tweak for this but i had the same problem in my first couple of days with my diamond. all you have to do is practice a lot and you'll get the right movement of your thumb
I had the same problem, but after installing the new Swiftblade Rom it all went better its like the other ROM is too slow so that it forgets your thumbs is on the screen and then it just opens a Program.. all these problems totally disappeared with Swiftblade 6.0
Try this:
realign your screen, but barely touch it! just pres SUPER SOFT just hard enough to make the crosses react.
Then try scrolling again
Riel said:
Try this:
realign your screen, but barely touch it! just pres SUPER SOFT just hard enough to make the crosses react.
Then try scrolling again
Click to expand...
Click to collapse
Thank you so much - this did the trick! When I originally configured it, I remember pressing down really hard - this time I pressed down as softly as possible, and it resolved the problem!
Thanks again!
Related
i dont like to use touch flo and would like to know if someone has found a way to disable it ?
thanks, eric
their is touchflo option in settings (under system I think), should allow you to disable it
Go to the the TODAY settings...
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
the touchflo (finger panning) option is the one i want to turn off.
i still want to keep the htc home in my today screen.
aaronsmckee said:
their is touchflo option in settings (under system I think), should allow you to disable it
Click to expand...
Click to collapse
there is only one checked box about the sound on/off when panning. no where to disable it.
I'd love to turn touchflo off. It seems pretty worthless. It scrolls a page to slowly and in PIE its hard to get it to stop when u get to a spot you want to view.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
I had followed above with soft reset also, but still the "touch flo" function running in PIE. This is pretty annoying and useless function if you used to your finger scrolling webpages with PIE plus.
Another one can helps..Thank.
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
jamespaulritter said:
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
Click to expand...
Click to collapse
Out of curiosity does that change also speed up PIE scrolling the normal way ? - cos it's super laggy and worse than TyTn in the out of the box setup.
Mike
Well if i hold my finger in the scroll bar field it will page up/down at 4 pages a second. The reg edit doesn't seem to have changed anything other than the touchflo scrolling
TouchFlO Scrolling and Sound
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
MardiG said:
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
Click to expand...
Click to collapse
Have you even looked at the settings in your tilt\Kaiser? you would have found atleast on answer to your questions just by looking around and learning your device!
I guess to each his/her own, but I personally think the TouchFLO interface is a huge improvement in usability. Perhaps it just takes some getting used to. And with TouchFLO, you can still essentially do all the things you could without TouchFLO. E.g. the scroll bars are still there to be used if you like that. And you can still use the stylus for normal operations. There seems to be some confusion about how it works so let me explain the "use cases".
The way TouchFLO works is this:
- use a finger (not your fingernail) to "drag" the screen up/down (or even left/right if the page is wider than the screen). The page should drag with your finger. It's semi-smooth. Not truly smooth, but smooth enough. When you drag, DON'T lift your finger from the screen till you've got it positioned to your desired spot.
OR
- If you use your finger (not your fingernail) to swipe up or down AND LIFT your finger fromthe screen as you do it, then the screen with scroll by itself to the end in that direction or until you tap the screen again to stop it.
OR
- if you use the stylus or your fingernail, then it will NOT scroll like above. It will then behave like a normal stylus control (highlites and selects instead of scrolling).
So, the screen reads a broad touch (like your finger) differently than a narrow/pinpoint touch (like your nail or stylus).
once I got used to it, i found it to be an excellent upgrade in the interface. I don't think it was a "feature that was rushed out the door" at all. in fact that it reads the stylus and your finger differently speaks to the idea that thought went into it.
Use it on a web page to see the different use cases. If you browse a PDF file, it'll drag even with a stylus because you can't "highlight and select" within a PDF file, so it knows that use case is invalid.
Also, You can change the sensitivity by using a reg tweak: HKLM-DRIVERS-TOUCHPANEL-PRESSURE THRESHOLD. Increase/decrease it for more/less sensitivity.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
You do realize this has nothing to do with TouchFlo ... right?
jomo25 said:
There seems to be some confusion about how it works so let me explain the "use cases".
Click to expand...
Click to collapse
Nice writeup, thanks!
Richard "Still Jonesing for a Tilt"
I wish there was a way to partially disable the Kaiser implementation of touchflo --specifically, the feature where if you drag scroll and your finger ends up at one of the edges of the screen (which is really easy on a 2.8" screen using your thumb) it goes into the continuous scrolling mode. I wish those edge regions of the screen were treated just like any other.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
Thanks from me too for this tip. I don't use TouchFLO and I found the touchscreen on my TyTN II a bit annoying with this enabled. Sometimes it wouldn't react to tapping so I had to tap twice. This was maybe one out of every three or four taps.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
jonrulezz said:
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
Click to expand...
Click to collapse
Please don't go digging in the graveyard, it disturbs the other corpses
Try going to settings>today>items>uncheck touchFlo
I don't mean to sound dumb, but I have the touch-it rom on my wing and im trying to figure out whats so different from my orinal tmobile rom as far as this touch flo thing goes... in my setings i keep seeing something about a cube and all but i dont see a cube... I go to programs and tap touchflo but nothing special or magical happens... I just need help... is this just a name or should my phone have things flowing on screen or what?
read the forum post for the touch-it series. it says you have to go into the settings under programs and select how to start the touchflo cube. after first installing it won't work until you do this.
^^^ I did but i still never see anything...
i went on you tube and i see what it is supposed to do do but my phone still isnt doing it...
After enabling the cube and setting 'View mode' to 'TF default v4.1', press whatever button activates TouchFlo and sweep your thumb from the bottom of the screen to the middle/side. The cube should appear. If not, press the TouchFlo button again and sweep from side to side and see if that works. Don't use your finger tip either. It may not recognize it. When the cube finally appears, sweeping from side to side will roll it. Use the sweep from the bottom of the screen to the middle/side to close the cube.
OK guys i got it working... this is pretty neat
Thanks for all the help^^^^
TouchFlo is one of those "ooo look at this" although it isn't very useful! haha.
i don't use the cube either, on the other hand i won't be able to go w/o the finger scrolling anymore...very useful
Oh yeah, True that. I love the finger scroll on the contact list.
I came across Winterface last night.
I must say being an ipod touch owner I do like Winterface. The ability to have buttons for applications, contacts and settings all mixed up is great!
Also the slide function is very smooth. I have only found that sometimes its hard to press the buttons just right to activate them but that may just be fat fingers on my account.
I like Touch Flow but do find it a bit slow (even with the registry adjustments). I cannot update my rom as I cannot get a Hard SPL to load so Winterface is a nice alternative.
Three big problems for me:
1. No way to see upcoming appointments/tasks
2. Buttons are hard to press because the screen starts sliding
3. It's hard to get from the applications to the Winterface without closing them, if your OK button is set to Close. You have to get to the today screen and then make the finger move.
For me, it's unusable.
gave it a 30 minutes try on my Diamond.
Buggy buttons indeed - pressure issue with Diamond.
Would like to see Accelerometer support - shake and bake - switch screen or so.
I give it a fair 8/ for concept - a 3/ 10 for price (39USD is very expensive)
I will wait for Schaps UI
Hello
Is it possible to have a blank wm6 without all of the customization that HTC add to the diamond eg WM dialer, wm keyboard WM sound control.
Thank you
Could u repeat the question??? in a elaborate manner cause i didn't understand it all.....
I think he wants a clean boot...
I once had a E-ten X500+ and when you hard reset it you could stop the E-ten programs installation by pressing a button during the installation process, so you had a clean WinMo device without the E-ten apps.
Just soft-reset your device when the customizing starts....
Wow I haven't thought of that...
But does that mean you don't have the touchflo3d too? I really don't need that. Also is it safe to do that because you could mess up your device, not???
Hi Whitefalcon This what I meant,
1-without the touchflo addition
2-With windows mobile pop out sound bar when i press up/down volume button, not the annoying black system volume/phone volume.
3-without annoying grey text preview stripe above when i type.
4- With windows Internet explorer (eg without Opera)
thanks and have very nice day.
Thank you so much ChiefmasterB'
Soft reset during customization worked fine although it was tricky timing when to press.
If you still know other ways it would be good to hear.
Thank you for the tip, I didn't know that it is possible.
Cheers
luke332 said:
Thank you so much ChiefmasterB'
Soft reset during customization worked fine although it was tricky timing when to press.
If you still know other ways it would be good to hear.
Click to expand...
Click to collapse
So can you tell us exactly when to soft reset? Maybe a screen shot of the exact time to soft reset... That would be handy...
luke332 said:
Hi Whitefalcon This what I meant,
1-without the touchflo addition
2-With windows mobile pop out sound bar when i press up/down volume button, not the annoying black system volume/phone volume.
3-without annoying grey text preview stripe above when i type.
4- With windows Internet explorer (eg without Opera)
thanks and have very nice day.
Click to expand...
Click to collapse
Sounds like you need a clean ROM.
Panosha Simple 1.1 is all the things you have mentioned. It does include the Diamond dialer but it is easy to disable.
Ok, first to the admins/moderators - I searched my ass off trying to find a thread with my problem, to no avail... so if there is one, please excuse me...
So here is my problem - I find it very difficult to scroll any list with my finger because I just end up selecting some item from the list... Is there any registry setting to, lets say, delay the select behavior of TouchFlo? I mean, for example, I try scrolling my contacts, I AM able to scroll but almost immediately after I start scrolling I end up selecting some contact!?! Am I the only one with that problem? PLEASE HELP!
Bump. Anyone?
I just have the problem the other way around, I just can't select multiple items because everything starts scrolling...
try scrolling with finger in more center of screen
selecting works if you scroll motion on left or right side usually
joshkoss said:
try scrolling with finger in more center of screen
selecting works if you scroll motion on left or right side usually
Click to expand...
Click to collapse
Also , make it more of a " flick " with your finger, instead of a touch and drag scroll.
So there's no registry setting? I have tried changing settings in HKLM\Software\OEM\TFLOSettings, HKLM\Software\HTC\HTCGesture, HKLM\Drivers\Touchpanel, HKLM\Software\HTC\TouchScroll... can't seem to make any difference!!! The screen becomes more responsive, scrolling is faster/slower, but no effect on my problem - whenever I try to scroll I always end up selecting... there HAS to be some setting that determines the delay from scrolling to selecting behavior... it works so well on the damn iPhone... also works beautifully on the S2U2 settings screen... they should fire all the idiots at HTC and hire the S2U2 guys to do their interface!!!
mmmfff said:
So there's no registry setting? I have tried changing settings in HKLM\Software\OEM\TFLOSettings, HKLM\Software\HTC\HTCGesture, HKLM\Drivers\Touchpanel, HKLM\Software\HTC\TouchScroll... can't seem to make any difference!!! The screen becomes more responsive, scrolling is faster/slower, but no effect on my problem - whenever I try to scroll I always end up selecting... there HAS to be some setting that determines the delay from scrolling to selecting behavior... it works so well on the damn iPhone... also works beautifully on the S2U2 settings screen... they should fire all the idiots at HTC and hire the S2U2 guys to do their interface!!!
Click to expand...
Click to collapse
u should blow up their forums then
Oh well, I guess I'll just wait till some genius dev out there finds out the right registry key, I give up
I hate to say this, but I think that is the expected behavior or TouchFlo scrolling.
You can drag to scroll specifically (and I don't believe this selects anything, at least on my Tilt), or you can swipe to start kinetic scrolling. If you click while kinetic scrolling is occurring, I think TouchFlo causes a selection to be made (although in places where single-click activate is the default, I don't think it actually activates the item--it simply highlights it).
You may be able to resolve this by changing the TFLOSettings\FingerPressure value.
I had a problem for the first six months with TouchFlo where the context menu would pop up about one in three times I tried to scroll (swiping or dragging). This happened even the moment I started using the device. Completely and utterly unusable. But after the third or so time I tried adjusting TFLOSettings values in the registry, I finally solved the problem. I ended up with TFLOSettings\FingerPressure=0x64 (100) and TouchPanel\PressureThreshold=0xC8 (200).
I REALLY wish HTC or someone would produce a complete guide to customizing TouchFlo scrolling (including the meanings of the TFLOSETTINGS values). It really works well, once it is optimized. Although, it will be great if Microsoft builds scrolling into the Common Controls in WM6.5.
mmmfff said:
Oh well, I guess I'll just wait till some genius dev out there finds out the right registry key, I give up
Click to expand...
Click to collapse
Actually there are genius developers in here. I think you're just being a little picky, the touch flo works fine for me.
I think I recall a touchflo sensitivity setting in KaiserTweak. Get it, then try setting the Touchflo sensitivity to the most sensitive option possible.
Dave
+1 on Kaisertweek, altho I reduced sensitivity instead of increasing it. Technique counts too. I tend to use nails or stylus for browsers, especially Opera. Use keyboard for contacts, and scrollwheel to dial it from there. Every phone is different, but reducing sensitivity via Kaisertweek worked for me.
Problem solved
Finally figured it out and now it works perfectly. The culprit was the too high value in HKLM\Drivers\Touchpanel\PressureThreshold.... I put a value of 160 (dword:000000a0) and now I have almost iPhone experience
heres a thread closer !
to bring some closure to this thread, the following utility will solve all your touchflo woes!!!
http://forum.xda-developers.com/showthread.php?t=499837