Touch diamond problem in screen buttons ! - Touch Diamond, MDA Compact IV General

I can't controle screen buttons,for ex when I press 3 it show 1,and the same problem for all functions,when I press yes it does no
I flashed it with an officiel ROM but it didn't resolve the problem!!

A basically rule of thumb regardless of whether the Rom is Official or Cooked is to do a Hard Reset immediately after install.
Did u do this?

Try re-aligning your screen

Thank you for replyes,I will try

I did hard reset but no result !

its a hardware problem with the screen, take it in for repairs or replacement
mine did that and a few others on this site too.. its not a software issue at all..

Related

HELP !!!! stuck on windows mobile screen

everything was going fine until i installed blackberry connect, after installation there was a atomatic reset and the phone stopped on the windows mobile screen.
what do i do?
i do have the Kaiser tweak and a few other cab files but nothing major
please help!!!
Hi,
Don't panic!
Just do a hard reset and restore the latest backup you made. You did backup your device right?
Cheers,
Cacti
i have done multiple hard resets(push the little button on the bottom) and never get past the green win mobile screen.
no i havent backed up the phone and really dont care about the stuff on it, i just want it to come back on.
By just pushing the button on the bottom with the stylus you're only doing a soft reset.
You need to hold down the two soft keys on the front of the phone while pressing the soft reset button in order to do a hard reset.
now we're gettin somewhere.
its obviously my first time and i need to know what the send key is
thanks
The send key is the green call button.
hiya, I had same problem, and I've try hard reset and anything else u can think of, there was no way out, I had to ring O2 to seek for help, but they told me blackburry its not going to work on O2 stella ( but I was on dutty's 7 touch rom) , so they replace my phone instead.

Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD

Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.

problem with teeter

hi
i have a strange problem in my diamond.
when i start teeter the ball stays always on the same place. i move the phone in every direction and the ball doesn't move.
in other applications i rotate the diamond and the image don't rotate or rotate to the wrong side.
i've tried g-sen calibrator but didn't get any results. does anyone have a idea to help me please)
Sounds like the G-sensor isn't working, may have to do a hard reset.
is there anything else i can do?
Yes, send it for repair.
Your choice.
If the above advice don't work, you'll still have to send it for repair though.
i'm using the official rom 1.93 pt
how can i do the hard reset?
Darkzell said:
i'm using the official rom 1.93 pt
how can i do the hard reset?
Click to expand...
Click to collapse
Read the Manual or use the Search feature of the forum.
teeter problem..
try to delete the line with teeter setting from Gsen config...
1. flash another rom
2. hard reset and flash another rom
3. send it for repairs
hard reset,
press the reset button with your stylus stick while holding volumedown button and centre pad button for more than 3 secs.

Kaiser touch screen problem

Few hours ago i unlock my phone, there was a problem with radio rom, and my friend recommend to install Kaiser HyperDragon III_WWE version of WM6.1.
I install it, play 5-6 minutes and after this check some delay problem. I make soft restart and after this phone touch screen don't work.
Touch don't response. Made hard restart ... and it's the last think that i did.
At startup i check this "tap the screen to setup your windows devices ....", but as touch screen don't response .. i don't have any progress.
Try to resintall the same WIN6.1 version, but no changes.
Any advice? what's the problem.
Is there any way to fix it ?
sounds like a hardware problem. Most likely the wiring is bad or corroded. You'll need a new screen or you might be able to fix the wiring. I kind've don't like the fact that our kaisers vibrate at startup because you think it would eventually rattle something loose which may have happened in your case. Before getting a new screen though, load a new ROM. To do it without activesync enter the bootloader mode by pressing down the camera and power button at the same time while the phone is off. Then connect your phone and it should say USB after a few minutes. Then flash
http://forum.xda-developers.com/showthread.php?t=485288
Please Read This Thread...
Because I had almost same problem like your's...
Try the install HardSPL...

help with problem

hi guyz
ive a AT&T Tilt (Kaiser 100). so ive flashed my kaiser loads of times no problem was running great until now when i unlocked it the PPT button and call program open up themselves and some ramdon keys such as E,D,C,etc are pressed!!
also the slide keypad stops responding but the lights are still on for it. the navigational buttons on screen side stop working and the start menu opens up by pressing the button in the middle of navigational buttons!! rest of the keys dont work. power and camera keys still work!
i gave my phone a rest for 4 hours and when i turned it on it started working fine and then again after 5 minutes of use same problem. sometimes in the middle of use it automatically starts working again fine and then same problem comes and this keeps going on!!!
one of my workers at the office mishandled my phone (i think) he couldn't figure out how to slide open the phone and tried everything
so i cant rule out if its hardware or software problem???
please help!!
Hard reset your device and see if that solves the problem.
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
jsngrimm said:
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
Click to expand...
Click to collapse
Because sometimes...well most of the times, with a help thread request like yours are solved with a hard reset . Going by the book...(oohh and it was late last night by the way )
On another note, seems like your friend did mess some of your keys and probably hardware issue. Try and mess with some keys and see if they are not stuck.
In most situations it quicker and easier to reset the phone. Just thnk about it, you don't have the original OS to repair with and you don't really have a method of sending commands to the phone.

Categories

Resources