Related
Hi,
Have a XDA O2i and I have a motorola blue tooth handsfree.
I have been using these together fine for a while now. I have also purchased Voice Command. So my mobile speaks the number calling and my calendar reminders etc via the phones speaker and never through the bluetooth which I would dearly love. Then all of the sudden the other day Voice Command started working through the bluetooth headset and I was getting the calls announced on my bluetooth and it was fantastic. Then I tried to use the XDA and the thing was locked and I needed to reset it. Once it had been reset, it went back to announcing stuff via the phones speaker. Now I know it can be done, I want to know if there is a backdoor hack that can make this permanent and keep the XDA working at the same time. Anyone here know of this.
On a further note, I think it would be even better if you could use the bluetooth to make calls through the voice command software rather than having to use the actuall phone which sort of defeats the who functionality.
Anyway any help would be great.
andrewau
My headset (a Jabra) has 2 connection settings with the XDA2i.
In standby mode you get a headphones symbol on the PDA display
In active mode the headphones have lines coming out of them
To switch between the two modes on the Jabra you tap the call button on the headset.
I don't know if this will work, but give it a try.
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all
I have been installed microsoft voice dialing 1.6 and i get enabled voice dialing with my bluetooth headset and enabled reciving calls with headset.Because this microsoft program is very,very,very bad( Sometimes it is work ,sometimes not,it is very hard to speak name from contacts 40%,and if you changed name you must to spell it right and have conflict with other names in contact)
I instaled now VOICE2GO and must say it the best of the best voice program.
You can record your contact name or comand and it is working for 100%, and you have macros and can do everything that you imagine with voice dialing.
But i can only recived calls via my bluetooth device and can not make calls via headset.I must first make call via mobile phone and then it is transferd via blutooth headset.It is very strange because i can make call with headset only for last dialed phone number.
How are yours experinces with this program ,sony ,and bluetooth headsets.
netvlada said:
I have been installed microsoft voice dialing 1.6 and i get enabled voice dialing with my bluetooth headset and enabled reciving calls with headset.Because this microsoft program is very,very,very bad( Sometimes it is work ,sometimes not,it is very hard to speak name from contacts 40%,and if you changed name you must to spell it right and have conflict with other names in contact)
I instaled now VOICE2GO and must say it the best of the best voice program.
You can record your contact name or comand and it is working for 100%, and you have macros and can do everything that you imagine with voice dialing.
But i can only recived calls via my bluetooth device and can not make calls via headset.I must first make call via mobile phone and then it is transferd via blutooth headset.It is very strange because i can make call with headset only for last dialed phone number.
How are yours experinces with this program ,sony ,and bluetooth headsets.
Click to expand...
Click to collapse
Use Jack's Rom version 2.8 or later. When you install Voice Dialer pressing the bluetooth button will start it.
PLZ HELP
so any other ROM wont start voice dialing by pressing a button on bluetooth headset?
I'm using generic ROM and i installed voice2go and MS voice command but i can't find out how to dial using my bluetooth...
Vito says
You need Audio Gateway profile, a system driver in your OS that makes your device receive incoming sound stream using BT headset. If you have it then it should work. You should get this driver browsing the web site of your device manufacturer or you can search a compatible ROM update browsing some other web resources.
Hello All,
I know that the HD2 doesn't have voice dialling but I've also noticed something else.
With my SE phone and BT on I can dial from the phone but have the option of continuing to use the phone for the call or use the BT headset. I realized this today (just got the HD2 2 days ago) when trying to initiate a call from the phone while I had the BT function on it always goes to the BT headset unless I turn off the BT function.
Unless I'm missing something can anyone tell me if there's an app or a setting to enable this feature?
TIA
No one knows?
Hello,
I was wondering if anyone had any suggestions or recommendations for a problem I have with my GN2,
The problem is that I use a pattern lockscreen with my GN2 and when I use my Motorola 730 bluetooth headset to make outgoing calls, it won't work when the screen is locked. It looks like this is because the phone activates the phone's voice dialer, sVoice, which won't launch when the screen is locked. Is there a workaround for this, or a similar bluetooth headset that will work with a locked screen? I would like to both make and receive calls when driving, without having to put in the diabolical pattern I use to unlock the screen.
Thanks in advance,
-Plaz
I have the same problem with my Galaxy S2 and now this phone when a lockscreen pattern is used.
I have the same problem. Except I'm using a Jawbone Icon and face unlock. From what I can tell it might be because it's trying to open S Voice instead of the normal Google Apps or it's Touch Wiz. Either way When I'm on the road, which is all the time it is super annoying to have to unlock my phone before using the hands free...
Ghost_1 said:
I have the same problem. Except I'm using a Jawbone Icon and face unlock. From what I can tell it might be because it's trying to open S Voice instead of the normal Google Apps or it's Touch Wiz. Either way When I'm on the road, which is all the time it is super annoying to have to unlock my phone before using the hands free...
Click to expand...
Click to collapse
I think I found the solution but I have to test it with my note 2. Download automateit pro from play store and toggle it so that Bluetooth connected will bypass lockscreen and bluetooth disconnected will engage lockscreen. For $1.60 it is worth a try. For some reason it still won't work on my GS 2. From a lockscreen, as soon as I connect the bluetooth, the pattern screenlock is disable and I can operate the phone BUT I still can't activate voice dialing either from the headset or long press search. The voice control app still think the phone is lock. It maybe because I am on custom ROM on my GS 2.
.
Plazmid said:
Hello,
I was wondering if anyone had any suggestions or recommendations for a problem I have with my GN2,
The problem is that I use a pattern lockscreen with my GN2 and when I use my Motorola 730 bluetooth headset to make outgoing calls, it won't work when the screen is locked. It looks like this is because the phone activates the phone's voice dialer, sVoice, which won't launch when the screen is locked. Is there a workaround for this, or a similar bluetooth headset that will work with a locked screen? I would like to both make and receive calls when driving, without having to put in the diabolical pattern I use to unlock the screen.
Thanks in advance,
-Plaz
Click to expand...
Click to collapse
OK I think I found the solution to this locked screen and making outgoing call with bluetooth using S Voice.
When you use a lock screen of some sort besides the swipe, you get this problem. You are fishing, the phone is in the waterproof case, or in your pant pocket, you activate S Voice using your bluetooth and S voice will not come up since the phone is locked and you can't make voice dialing until you unlock the screen.
Solution:
Tap the green phone app, select call settings, Accessory settings for call, look under BT headset settings for outgoing calls, enable Make calls even when device locked.
Now using my LG stereo bluetooth headset, I still can't directly access the S voice when the screen is locked. But, I can long press the call button(on my BT headset) and then it will dial the last number called. Then I quickly hang up, lightly press the call button(on my BT headset), and then S voice will be enable and I can say "Call David Mobile or play music, etc).