horizontal finger-scrolling in windows calendar - Touch Diamond, MDA Compact IV General

Hello,
few days ago I used Blackstone for the first time.
In standard windows calendar it was possible to switch between the days via horizontall finger-scrolling.
The Blackstone was 5.2.20764 build.
now with the new diamond ROM our lovely device gets official to 20764 build.
But it´s not possible to scroll between days in calender.
Does anybody know a solution?
thx a lot....

nobody? any hints or tips?

I can confirm this too. I really miss this new feature on my diamond.
I hope this can be solved in the registry

There is a little application called gscroll which makes it possible to use the touch panel for vertical and horizontal scrolling (and scrolling when tilting the device).

I dont want to inst. an add. program just for only 1 additional feature in calendar. Gscroll is not freeware too.
Why TouchHD can and Diamon can not scroll in calendar? Which registry entry?

Hm... same question from me....
btw: I tried GScroll ... my Diamond hangs after some time using this tool... so not an option....

Use the scroll wheel thing, enabled in Advanced Config app.

I also need the horizontal scrolling of the days with fingers in the calendar! All ROMS 6.5 for the Diamond have enabled this function (also my Topaz with 6.1) while the Diamond with the 6.1 ROMS original or cooked did not! No one who has a solution?
I have the ROM 2.07.Gen.Y ITA that is beautifull and like the Diamond2 aka Topaz but unfortunally the horizontal scrolling of calendar's days is for me fundamental!

None?
Are two days that I try to enable this feature on the Diamond but without results!
If taking "\windows\calendar.exe" from Topaz and replace it with the Diamond?
The problem is that Total Commander don't allow me to copy the file calendar.exe!

Related

rom like this

someone know a rom version like is in this video for HTC P3600? thanks
http://www.youtube.com/watch?v=UMpZ0DkU-aE&mode=related&search=
Hi Marius -
You are looking at two different pieces of software on that phone.
The first one is the HTC Home screen for the TyTNII, which HAS been copied over to the Trinity. You can tell if that is the home screen used in the ROM because it will usually be shown as HTC Home Kaiser or something similar. You can also install this using a standalone CAB file. Search the board to find the cab, it's in the Trinity WM6 portion of the board.
The second one is a piece of software called Touchflo. The real Touchflo software requires that the touchscreen hardware be the same as the Kaiser or the HTC Touch. Those two phones use different touchscreen hardware (physical chips and the digitizer screen) than the Trinity. So, no one has been successful using the real Touchflo software on the Trinity, and probably never will.
However, there have been some attempts to get the same functions from other software. I've seen something called alphatouchflo, and there are other packages. Note that they do not have all of the same functionality. For example, I haven't seen any of them that could allow use f the scrolling feature to replace sidebar scrolling. I've only seen good scrolling of a third-party contacts list (see PocketCM as an example). This software is also available in a standalone CAB file if you like.
There is a thread devoted explicitly to using Touch Flo on the Trinity in the WM 6 section. If you take a minute or two you can easily find it.
Good luck!
Mike
yes... but i`m looking for rom. the rom have htc home screen instaled in it.
and in this video the scrolling works perfect... i read on the htc p3600 this "tochflo" have some problems. but on other devices these cooked rom with "touchflo" work good. i still looking and waiting for a good rom wm6(not a aplication "touchflo"). now i have wm5.
mariusY said:
yes... but i`m looking for rom. the rom have htc home screen instaled in it.
and in this video the scrolling works perfect... i read on the htc p3600 this "tochflo" have some problems. but on other devices these cooked rom with "touchflo" work good. i still looking and waiting for a good rom wm6(not a aplication "touchflo"). now i have wm5.
Click to expand...
Click to collapse
Hi Marius -
The other devices that use Touchflo have different hardware which is why the Touchflo works for them. The device shown in the video is the HTC Prophet series, which uses the same touch screen as the Kaiser/TyTN II (which is different form the Trinity). You will not find any software or ROMs that can run the Touchflo software on the Trinity. As far as CAB software compared to a ROM, the only difference is in the method of installing. It doesn't matter if you install the software using a CAB file or if it is already included in a ROM, except that you can remove software installed using a CAB if you don't like it.
I suggest you continue watching the thread about Touchflo on the Trinity in the WM6 folder. That thread contains the most current information about using Touchflo on the Trinity.
Mike
Mike
ok.. thanks for informations

TouchFlo ...

Hi,
Right been doing some digging around the forum to try to get to grips with how to use Touchflo on my Kaiser (Vodaphone v1615 WM6.1 build), but haven't really found an answer. I can see an icon in settings for Touchflo that just says enable sound when scrolling, but i don't get any other options to enable it.
How do i enable default HTC (cube) touchflo on my Kaiser? or is it not part of the Tytn2 standard build? I have tried Ftouchflo which works, but am after looking at default HTC stuff before looking at other implementations etc as the ftouchflo stuff didnt quite work as i wanted.
Thanks in advance
Drew
Drewbie said:
Hi,
Right been doing some digging around the forum to try to get to grips with how to use Touchflo on my Kaiser (Vodaphone v1615 WM6.1 build), but haven't really found an answer. I can see an icon in settings for Touchflo that just says enable sound when scrolling, but i don't get any other options to enable it.
How do i enable default HTC (cube) touchflo on my Kaiser? or is it not part of the Tytn2 standard build? I have tried Ftouchflo which works, but am after looking at default HTC stuff before looking at other implementations etc as the ftouchflo stuff didnt quite work as i wanted.
Thanks in advance
Drew
Click to expand...
Click to collapse
RTFM
Ta
Dave
Drewbie said:
Hi,
Right been doing some digging around the forum to try to get to grips with how to use Touchflo on my Kaiser (Vodaphone v1615 WM6.1 build), but haven't really found an answer. I can see an icon in settings for Touchflo that just says enable sound when scrolling, but i don't get any other options to enable it.
How do i enable default HTC (cube) touchflo on my Kaiser? or is it not part of the Tytn2 standard build? I have tried Ftouchflo which works, but am after looking at default HTC stuff before looking at other implementations etc as the ftouchflo stuff didnt quite work as i wanted.
Thanks in advance
Drew
Click to expand...
Click to collapse
The cube was/is not part of the official build.
Thanks for that..i did read the wiki but just wanted some clarification as to be honest wasn't 100% clear to me .
Drewbie said:
Thanks for that..i did read the wiki but just wanted some clarification as to be honest wasn't 100% clear to me .
Click to expand...
Click to collapse
Let you off then
Ta
Dave
Right been having a bit of a play...and think i need some further help lol. At the moment I haven't installed the HTC Cube (found links for it elsewhere on the forum) and am just playing with the finger scrolling. Out of the box i can't scroll in contacts or calendar etc but have installed Opera 9.5 and that works a treat...not sure if thats part of Touchflo support or anything .
I then installed FtouchSL (Trial version) and get scrolling working (though it says it will disable Touchflo scrolling) in contacts, but not calendar (i.e left right to go through days etc). Then Opera 9.5 does not work with finger scrolling at all.
I have now removed FTouchSl and wondering how i get scrolling to work with inbuilt Touchflo? I would like to be able to finger scroll through contacts and calendar for example.
Cheers
Drew
Drewbie said:
Right been having a bit of a play...and think i need some further help lol. At the moment I haven't installed the HTC Cube (found links for it elsewhere on the forum) and am just playing with the finger scrolling. Out of the box i can't scroll in contacts or calendar etc but have installed Opera 9.5 and that works a treat...not sure if thats part of Touchflo support or anything .
I then installed FtouchSL (Trial version) and get scrolling working (though it says it will disable Touchflo scrolling) in contacts, but not calendar (i.e left right to go through days etc). Then Opera 9.5 does not work with finger scrolling at all.
I have now removed FTouchSl and wondering how i get scrolling to work with inbuilt Touchflo? I would like to be able to finger scroll through contacts and calendar for example.
Cheers
Drew
Click to expand...
Click to collapse
Leave off the FTouchSL for now. Find and install schaps advanced config and set make sure TouchFlo is enabled in there. My contants works with Finger Scrolling. My current calender is TouchCal and that is already FF (Finger Friendly) you can try it for nowt. Opera I think has it's own touch scrolling.
Also try pocket CM as a FF contacts app. Or install HTC Random Access, this adds FF letters into normal contacts.
Ta
Dave
Thanks Dave will give that a try

Touchkeyboard problem

Help! My on screen (full QWERTY) Touchkeyboard has disappeared!
I have to use the very small standard (poor) windows keyboard (only useable with stylus) or the - for this reason- installed Spb keyboard (is very useable but not the same).
After installing Gyrator, Diamond Tweak 0.5.3 Dutch and AtomAng & Danny and TF3dD2 Tweak the TouchFlo3D keyboard seems to be stuck in a sort of phonekeypad-modus and it won't get out. Soft reset, uninstalling gyrator and tweaks etc. nothing helps. Does someone own the TouchFlo Keyboard cab-file (if it exists) or have a solution? Please help!
Thanx.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
frankkk said:
Help! My on screen (full QWERTY) Touchkeyboard has disappeared!
I have to use the very small standard (poor) windows keyboard (only useable with stylus) or the - for this reason- installed Spb keyboard (is very useable but not the same).
After installing Gyrator, Diamond Tweak 0.5.3 Dutch and AtomAng & Danny and TF3dD2 Tweak the TouchFlo3D keyboard seems to be stuck in a sort of phonekeypad-modus and it won't get out. Soft reset, uninstalling gyrator and tweaks etc. nothing helps. Does someone own the TouchFlo Keyboard cab-file (if it exists) or have a solution? Please help!
Thanx.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
Click to expand...
Click to collapse
You've enabled T9 input with one of your tweaks, probably diamond tweak, go back in and disable it again.
Come on... you can use the microsoft keyboared with your thumbs. I used to for a while on a smaller screen than the D2.
But anyway I have no real help just thought I'd throw that in because it was one of my selling points when selling my Elfin. Look how accurate this screen is. I can type faily accurate and quick on this tiny keyboard..... try that on an iphone. Oh and I have these 3 other keyboards you can use to....
Great stuff.
Touchkeyboard solution
shuflie said:
You've enabled T9 input with one of your tweaks, probably diamond tweak, go back in and disable it again.
Click to expand...
Click to collapse
Thanxx Shuflie, that was the solution: even a better one then what I hoped for.
It works fine again now (after a soft reset).
Really strange bug in the tweak prog however... How did you figure this out Shuflie?
Again thanx for your help.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
frankkk said:
Thanxx Shuflie, that was the solution: even a better one then what I hoped for.
It works fine again now (after a soft reset).
Really strange bug in the tweak prog however... How did you figure this out Shuflie?
Again thanx for your help.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
Click to expand...
Click to collapse
I did the same thing when I had my Touch HD and it took me ages to figure out what the cause was.
why the hell did they remove the compact qwerty? I like the new full-qwerty, but I always found the compact version much better in this form factor for 1-handed use.

Touch flo and Manila version how to know ?

Hi all, i'm sorry to write for this question, but i got a Tytn II just from 2 weeks, and i don't know which software i have on it, which version of Touch flo or Manila (if 2d or 3d), there is away to know the version of the software ?
Is There a way to update it if it is old ?
I know i have
Rom 3.29.408.0 ITA
Rom Date 05/07/08
Radio v1.65.16.25
Protocol v. 25.83.40.02H
My tytn ii is WM 6.1 PRO ITA CE 5.2.19212 Build 19212.1.0.3
I looked in Installed software but i can find only the software i installed, nothing about Touch Flo or Manila.
I suppose i have Manila, because i have the clock and several icons where i can find contacts, programs, weather, but i don't have the internet icon.
I found Manila version 1.20.19131530.00 at this link
http://forum.xda-developers.com/showthread.php?t=398173
but i don't know if it is good for the tytn 2, then i suppose it is in english but if i want it in italian there is something to change or install ?
If i install it, it will overwrite the installed Manila, right ?
If i uninstall it (because don't work or i don't like) the old one will be recovered automatically ?
I read about Manila 2D and 3D, which is the difference and where i found the 3D version ?
thanks for any hint and for the answers to my questions
if you have some link to explain my needs i will appreciate them
mav_top
In the Settings Tab on M2D will say TouchFlo version.
Hi stylez, the problem is that i can't find the Tab you are talking about,
i just see date and hour (digits), then the icons, one for contact, one for weather, one for programs, but i can't see the icon for the settings
this is why i don't know which version i have i can see it
thanks for any help
mav_top
Did you try to drag your finger to the right (and see how the icons are travelling to the left at the same time) ? There you'll find, usually at the last position, the settings tab.
Excuse me for this question, but:
For other questions, did you do an extensive search here to know how Manila works or how a Windows Mobile device works ?
hi all, and sorry but i discovered that i have HTC Home only infact in Today Elements, i have Date, HTC Home, Messages, and HtcHomePlug, so i suppose no Manila is installed on my device.
Infact i can't move to left or right, so the Home, Contact, Weather, Program and Phone Icons are of HTC Home and not of Manila.
Now if i want to install Manila then i can remove it if it doesn't like ?
is there an italian localization of Manila for Kaiser ?
is the herg repository for the english version only, right ?
thanks and sorry for the newbie questions
mav_top

[Q]Need your opinions/help about SE x1

Hi everyone
I need your help/opinions about SE x1 windows mobile 6.1 because i'am just new at this phone so i have many things to learn.. i saw some amazingly cool applications here but not worked at my phone properly like EzInput keyboard, i like that application but it doesn't work right, it appears small on screen,, can someone help me? thank's in advance..
list off questions
1.what is SIP?
2.what is the best windows mobile version for touchflo 3d?
3.what is best version of touchflo 3d with landscape mode?
4.SPB mobile shell panel is like touchflo 3d in today panel?
5.what is SPL and ROM do i have to change/upgrade it to install applications?
someome pls help me thank's in advance
EZinput probably doesnt work because you need the WVGA version of it. Your phone screen has a WVGA resolution.
SPL and ROM, you can go to the Xperia X1 HardSPL thread and find more information about it.
I dont think theres any "best" version of windows or TouchFlo3D because they all have their pro and cons. You can just try it by yourself and see which one you like the most.
TouchFlo3D and SBP shell have nothing to do with each other. They both change your today screen though. You wouldnt need a ROM change/update if the software you're trying to install is compatible with your current one. Judging from what you said, your current ROM is running Windows Mobile 6.1. So you should be looking for WinMo 6.1 applications that are compatible with your WVGA resolution.
thanks XtriFe for answering it, i saw some touchflo 3d but forgot the version, in the instructions for installing, one of it say's change the SIP something, what is that SIP or SIP selector..? thanks again
The easiest way to get Touch Flo on the X1 is to flash a new ROM with TouchFlo. There are helpful tutorials on the ROM development section on how to download and flash custom ROMs.
SIP can stand for 2 things, either as Soft Input Panel, meaning input apps like the onscreen keyboard and handwriting recognition, or Seesion Initiation Protocol, usually in connection with VOIP programs. For your question, it's most probably referring to the first one.
SPB mobile shell is an app to customize the toda screen, and there are versions of it that make our Today screen look like the TouchFlo interface, but you're not limited to TouchFlo (see Windows Mobile Development and Hacking>Themes for SPB MS themes/layouts)
Magkano bili mo sa X1 mo?
thank's harvey

Categories

Resources