links in my emails currently launch in IE, looking for the registry value that will default those links to Opera please?
That's an easy reg hack:
Open reg editor
Search for defbrowser
Line 0 should point to "windows/opera...
Line 1 says iexplore.exe
Change line 1 to operaL.exe
Close reg edit
Done
On my phone not even a soft reset though I would do one
open opera
in address bar type
opera:config
find
first time run
aaannnnnddddd DONE.
Related
have BB Connect installed on my Kaiser. I am able to get emails successfully over Blackberry and gmail. However, I cannot use Internet explorer over MediaNet.
GoogleMaps, the weather plugin, QuickGPS, etc can all get the data they need when connected through MediaNET but IE will not load any webpages. Also, if I connect to a wireless lan, the same thing happens. IE can't browse, but other apps access data just fine.
Any thoughts on how to fix this? There are no options to config connections within IE and the connection within settings seems to be correct (how else would the other applications be able to use MediaNET?).
Are there some proxy settings I need to change or fix? I was able to browse the internet with IE via wireless lan or medianet perfectly fine before BB Connect was configured.
Note:
I can launch BIS for internet explorer and use the Blackberry connection instead of MediaNET. Obviously though this is not optimal as BIS has lmited sites, low res pictures, etc.
I've noticed the same behavior. It happened when I opened the "email settings" icon. This opens pocket IE with an extra menu item. Since then, wifi works for all programs, but pocket IE just gives me a blank page...
Did a hard reset, and never used the 'email settings' thing again. Everything is fine now...
I've noticed the same issue. I've set my connection to medianet using the proxy, noproxy isp.cingular.com and wap.cingular.com. All other programs are able to get to the internet (google, live search, BBC internet explorer, etc.) except for the standard IE. I don't browse too often, so I use the BBC browser when I need one.
thanks all ... i know now not to click the email settings button ... did a hard reset and all is well ... MediaNet full web browsing kills BIS
Internet Explorer inoperable
Help please! I am using the Kaiser and have the following issues.
1. There are 2 capital 'E's in the top. One that says Blackberry Edge and the smaller E says Tmobile Blackberry Edge when tapped
2. I can not simultaneously use the browser to access the internet at the same time that I am using the blackberry service to access emails. One of the 2 must be suspended.
In other words, I would have to literally suspend blackberry in settings to go surf the web.
Does anyone have this issue? Can anyone at all offer assistance to correct the settings so both can work together.
Any leads greatly appreciated!! Michael
i am having the same problem. did not find a solution. started using xpress mail
Hi,
I have the same problem with my HTC Kaiser and T-Mobile Germany.
The funny thing is that T-Mobile doesn't support Blackberry on this device.
I just installed the BBConnect_WM6_Professional_BB_41.0.0.84.cab and restarted the device and was happy that all works fine. I got all my mails from company BES server, includes the security features which lock the device every 15 minutes.
If this will work with Blackberry mail for home users, I don't know. I tested the BBConnect only to our company server.
I have the same problem like users here has in this threat:
I can't use the Internet Explorer to browse in the Internet. That problem still exist on WLAN and on GPRS. I turned off the phone part and try to use WLAN, but I have the same problem.
I guess that the Blackberry Connect will modify the Internet Explorer (like other parts of the device) to enable security features.
If I use the Blackberry Browser I got the message that the service is not supported. I know that some colleague had the same problem with their Blackberry (Hardware device) and called T-Mobile to enable the service.
I can user Google Maps, IMAP-Mail profile, Weather software and other stuff from the Internet without problems (WLAN and GPRS), only the Internet Explorer and Media Player has problems to connect.
To solve the problem I will talk to the BES Admin or / and T-Mobile. If this will not solve my problems, I will install Opera Browser, which will hopefully work.....
Here are my versions:
Rom: 1.56.111.4 - 09/01/07
Radio: 1.27.12.32
Protocol: 22.45.99.07H
Erik
You have to go to registry:
hkey_current_user->software->microsoft->windows->current version->internet settings
and delete enableautodetect entry
This solve the problem for me
xklipschx said:
Are there some proxy settings I need to change or fix?
Click to expand...
Click to collapse
You can modify the registry key 'EnableAutoDetect' key found in the registry location:
[hkey_current_user\software\microsoft\windows\curre ntversion\internet settings']
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
(To disable proxy) Change it to:
"EnableAutoDetect"=dword:00000001
The best option is to delete the registry key (which I did) since some posts indicate this registry option gets set to 0 after a reset.
sancho1234 said:
You can modify the registry key 'EnableAutoDetect' key found in the registry location:
[hkey_current_user\software\microsoft\windows\curre ntversion\internet settings']
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
(To disable proxy) Change it to:
"EnableAutoDetect"=dword:00000001
Click to expand...
Click to collapse
Hi,
I changed the IE settings EnableAutoDetect from 0 to 1 and everything works fine.
I tested Opera Browser as well and it's fine, but I don't like the Bookmark synchonisation, this is better in IE....
Thanks a lot
Erik
Heya,
I have the same pb
BB push mail OK
pocketie, gmap ... NOT OK
Enableautodetect is allready 1
what's yr network setting ? "My blackberry" and "my Blackberry" ?
Please can you list me all
Tks a lot,
Nicolas
when i try to download CAB files and other types of downloads in IE it will often just open the file as text. Is there a way to have IE save certain file types or add a "save page as..." option to IE's menu on my Tilt?
I need some advice on how to get my web and MMS working on my diamond. I originally bought a new Sprint Diamond. I took it to Metro PCS and had it flashed to their network. Now my voice and text work. So I'm trying to get my web and MMS working. I changed my ROM to Juicy 4.3 and tried following a tutorial found here:
Code:
http://forum.xda-developers.com/showthread.php?t=448955
I tried everything exactly like it said there, and it is not working. Here is my exact settings and changes that I made:
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
I checked my windows folder, but I'm using Juicy 4.3 and I think that this file is not included in the ROM. In any case, it is not there.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
Once again, these files are not in my windows folder. I'm not sure what effect these files have on my connection, but I was unable to edit them.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
I did this with no problem. My unlock code was just 000000.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
My number is 972-781-8284, so I used the following:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = 9[email protected]
Home Address = 0.0.0.0 (set to 0.0.0.0)
Primary HA Address = 0.0.0.0 (set to 0.0.0.0)
Secondary HA Address = 0.0.0.0 (set to 0.0.0.0)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = set to metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dial = #777
Username: [email protected]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
I changed my settings to this:
Number to dial = #777
Username: [email protected]
Password: metropcs
Domain: (Left Blank)
I set my proxies to the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
So I click on the new connection and select the "Connect" option. It tries to connect and then it says that my username and password is wrong for #777. I try to go on the web and it won't connect. Also, when I go back and look at the connection, it deletes what I entered for the http option in the proxy settings. The other 3 settings are still there (wap, secure wap, and socks).
I'm not sure what else to try. I used the *228 option and updated my PRL firmware. It still doesn't let me connect. Please help!!!
Ok, I've got an update. I was able to connect to the web last night by changing the password in the tutorial to "mymetropcs". I changed it in the connection settings and also in the PP Security Settings.
Here is my current problem... My connection won't stay connected. It will sometimes connect for a little while, and then spontaneously disconnect. Most of the time, it won't connect at all. It gives me an error and says that my username or password is invalid. Also, It will sometimes delete my HTML Proxy settings that I entered in Connections. Does anyone know what is causing this and how I can fix it?
Confirmed
Followed all the steps and works perfectly ...
The only difference I had was my password and I used the last 4 numbers of my cell.
Thanks for the info.
skyfire not working?
Hey Guys,
I got internet working on PIE and google maps, etc, but for some reason Skyfire shows "network unavailable". I've tried swiching work network to the metropcs connection for programs that authenticate using a private network, but not go. Any ideas? Thanks.
htc guardian
Quick question, In my startup folder I do see a HTC CM Guadian but I do not know if its a .lnk or .exe? And if so I need to delete if its a lnk right? Under Windows folder i also have the same thing and do not know if its the .lnk or .exe? And I do not have the Iota files. Please help thank you!!
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
I would like to change the email address that my Exchange setup is pointing to in my Tilt. When I go into ActiveSynch and select Menu and select Configure Server, then get to the Edit Server Settings page, it will not allow me to do anything other than edit the password.
Any ideas?
I have data plan with ATT and when ever I soft rest my phone then after I can not connect to Internet using medianet.
I have to use Macodo nodata to to enable medianet connection or using mortscript I change registry and then try to get connected with medianet.
DO any one own which program fip registry back to disable?
Once registry changed it work till next soft reset.
in my startup i hae sddaemom.lnk, delWMPTempFolder.lnk, HTCSTartup.lnk, PKG.lnk, poutlook.lnk, LockDevice.lnk pahost.lnk fieldgchgs.lnk
Reg key i am changing is RegWriteDWord( "HKLM", "Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\MEdia Net", "Enabled",1 )
Have you tried just setting them in your connection setttings?
Going to Settings\Connections\Connections\Advanced\Select Netowrks and set both boxes to MediaNet.
You might want to also check your poutlook settings and make sure its set to "Connects to Internet"
Thank you advance seting worked but How to Check poutlook settings???
Bruce Inman said:
Have you tried just setting them in your connection setttings?
Going to Settings\Connections\Connections\Advanced\Select Netowrks and set both boxes to MediaNet.
You might want to also check your poutlook settings and make sure its set to "Connects to Internet"
Click to expand...
Click to collapse
I set both boxes in select networks to media net
Change registry and connected to internet
then softresetting and after rest I was online
Went to wheather tab and it downloaded info
Disconnected medianet and then went to stock page it Autometically reconnected and downloaded.
SO Thank you Thank you Thank you
But can you please tell How to Check poutlook settings? I do not know how to check.
once again thanks for helping
Another question is there any way I back up Settings\Connections\Connections\Advanced\Select Netowrks setting?
Awesome, glad it worked.
For poutlook, I'm not 100% this will be there unless you are using an exchange server (I run gmail as an exchange server using m.google.com as the server address) but go you your Inbox\Menu\Tools\Options, select your e-mail account, go to Menu\Advanced and the last box should be set to Connection: Internet.
I'm not sure where that registry key is but I would assume its somewhere in HKLM\Comm\ConnMgr\