Hi,
I bought a Diamond 2 weeks ago in French (v1.37.406.1 FRE) and I started to install .cab applications.
I tried to install :
S2U2 (1.05)
S2V
ESET NOD32 (on official site for PPC)
PHM
psshutxp
Advanced config (the link of XDA)
CorePlayer
none have been installed. The error message is :
The installation of "the_cab" has failed
Click to expand...
Click to collapse
So I do an Hard Reset and I was able to install :
S2U2 (but not the link of XDA)
S2V
PHM (not in the official website)
psshutxp
Advanced config (not the link of XDA)
but not CorePlayer and ESET
So I do an Hard Reset again but after nothing works
I do 2 Hard Reset again and I flashed my original french rom for the french rom in this topic : http://forum.xda-developers.com/showpost.php?p=2344831&postcount=42
the original.
And doesn't work
Where is the problem ?
Thx
nobody ??!?
You sure you have enough free memory to install those programs??.
I have same problem... have several programs that just dont get installed for unknown reason and it is even I chose flashcard also...
try updating ROMs, 1.37 is nutoriously slow anyway so that would definately help in terms of speed, and maybe its a bug on your ROM and you'll kill two birds with one stone, worth a try seeing as you've hard reset and lost your data anyway
I just uploaded all the apps using ActiveSync and it all works... Can someone explain why with USB drive it will copy but not work as it should?
Can we test it somehow?
Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.
buffystar said:
Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.
Click to expand...
Click to collapse
No no... sure I run CAB from the phone after I disconnected... I just upladed this via USB drive and it was making errors (just not working) but If I did same via ActiveSync it is working.
Can you explain this?
Hi all,
Not sure why, but when I connect my diamond to the comp and try and connect w/ active sync, get a message on my phone saying I must install active sync 4.5 or newer on my desktop computer. However, I just did before connecting
If I cant get active sync to work, could somebody please explain how I can install net compact framework via direct file transfer? I intepreted the instructions on the microsoft website as to install the msi file while the phone was connected but nothing's happened and no cab files have appeared on my phone so obviously not doing it correctly.
Thanks in advance!
repalce the Cabl
Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.
Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.
I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.
Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.
Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.
help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse
All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!
All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John
Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee
Hey i got a big problem,
everytime i connect my 4x via USB to my PC and try to copy some files to the intern/extern SD Card, the process aborts and i get message like your device isnt connected anymore - so i cant transfer files, same with LG PCSuite - it starts to copy, but after a while it stops and disconnects.
Sometimes i can tranfer files is through Sync with MediaPlayer ... any ideas?
I hope u understand my problem - my english is not the best i think ^^
thanks
mckoffly said:
Hey i got a big problem,
everytime i connect my 4x via USB to my PC and try to copy some files to the intern/extern SD Card, the process aborts and i get message like your device isnt connected anymore - so i cant transfer files, same with LG PCSuite - it starts to copy, but after a while it stops and disconnects.
The only think sometimes i can tranfer files is through Sync with MediaPlayer ... any ideas?
I hope u understand my problem - my english is not the best i think ^^
thanks
Click to expand...
Click to collapse
It's the same with me. Help!!!
mckoffly said:
Hey i got a big problem,
everytime i connect my 4x via USB to my PC and try to copy some files to the intern/extern SD Card, the process aborts and i get message like your device isnt connected anymore - so i cant transfer files, same with LG PCSuite - it starts to copy, but after a while it stops and disconnects.
Sometimes i can tranfer files is through Sync with MediaPlayer ... any ideas?
I hope u understand my problem - my english is not the best i think ^^
thanks
Click to expand...
Click to collapse
When you connect your phone to your PC choose MTP instead of LG PCSuite. Wait until the phone installs his driver ( this needed only first time). And that's it. I worked for me.
winampdj said:
When you connect your phone to your PC choose MTP instead of LG PCSuite. Wait until the phone installs his driver ( this needed only first time). And that's it. I worked for me.
Click to expand...
Click to collapse
It really help, try to copy a 100 MB file and it works, no problem anymore. Thanks - i thought i tried this before but obviously not but why i cant use LG PC Suite (not that i need this anymore ...)
Hello everyone!
So I just flashed my phone and put in the ViperONE ROM and my HTC sync manager won't work. Like my mac detects it and turns on the program but the program would freeze and I would not be able to do anything or click it. Secondly on the Sync Manager it shows my phone as "MTP device"?? What is that exactly?? Is that bad?? And lastly I tried to just transfer stuff via Android File Transfer, but that doesn't work either because the program says it can't detect my phone...
Please help.. Right now I can't transfer anything onto my phone