Database Develop

20 Softresets a day, solution?

I've got big problems with my Kaiser,
Almost everytime it falls in Standby mode, i can't reactivate it with the On/Off button. But the green LED is still blinking.
i've got the original HTC ROM 1.56.407.3
Does anybody have same problems? Or has anybody a solution for that problem.
It really bugs to restart it 20 times a day...

change to a different rom

and which one?

Any one...
I know it doesn't help and not very informative, but any of them sounds like it'd be better than what you have now.

I'm quite new here and have no idea which rom is good and stable.
Are there newer original ROMs from HTC?
Or which one would you propose?
I wood prefer one in German

skyrysers said:
I've got big problems with my Kaiser,
Almost everytime it falls in Standby mode, i can't reactivate it with the On/Off button. But the green LED is still blinking.
i've got the original HTC ROM 1.56.407.3
Does anybody have same problems? Or has anybody a solution for that problem.
It really bugs to restart it 20 times a day...
Click to expand...
Click to collapse
if you want a stable rom try Sleuth's v1.1

is it in german?

Same happened to me some days ago... but I solved it with a hard reset. Now it works perfectly again.

Take a look at those 2 threads, maybe they help....
http://forum.xda-developers.com/showthread.php?t=339792&highlight=of+death
http://forum.xda-developers.com/showthread.php?t=332088&highlight=of+death

Soft Resets
Had the same problem, tried new ROM's, hard resets...etc..etc. Problem fixed by changing SIM card from a three (or four) year old sim to the latest available. Everything running perfectly now!

I'd agree, it's not the ROM. I'm using it since day 1 and haven't even needed a hard reset yet. I want to try Sleuth's but the stock is so stable I'm not feeling the need to jump. I'd check your SIM as mentioned and them maybe a hard reset and a carefull watch of what you install back on the phone to see if it's a rogue application.

HTC Diamond shuts down if there is no network - any help?

This is my las try, I posted this message twice in the XDA forum.
I guess if no one having this issue I'll not bother folks with this again and will try to leave with it...
The problem goes like this, when I'm out of cellular reception area the phone shuts down and the only way to turn it back up is to remove and put back the battery.
I suspect this is some sort of strange power saving setting gone wrong.
Any idea on what can I do about it? Registry settings or something?
ROM: 1.93.831.1

Well, without knowing any better I've have to guess it was a problem with the Radio ROM. Are you using .08 or .11 radio version? If so, I'd try 0.5 - it seems to be the most stable for the majority of people here. I had heaps of problems (random freezes/crashes) when using 0.8 or 0.11 that forced me into a battery removal fix quite a few times...
If you've upgraded your Radio ROM (by itself) then most people suggest doing a hard reset afterwards, even though you don't *have* to, so make sure you try that...

obender said:
This is my las try, I posted this message twice in the XDA forum.
I guess if no one having this issue I'll not bother folks with this again and will try to leave with it...
The problem goes like this, when I'm out of cellular reception area the phone shuts down and the only way to turn it back up is to remove and put back the battery.
I suspect this is some sort of strange power saving setting gone wrong.
Any idea on what can I do about it? Registry settings or something?
ROM: 1.93.831.1
Click to expand...
Click to collapse
It happes to my diamond too. Now i've got the lastest rom with latest radio (05) and in a week it happened only one time (before it happens a lot of time during a single day..)..
I've buy a new battery today just to be sure that it not a battery problem. I'll let you know in the next days.
By the way in my case i've see that the phone does not shut down when goes out of signal, but before shutting down i hear a short sound than the signal is missed and then the phone shutdown. Many times i need to wait a lot of minutes to power on the diamond. I've also try to froze the battery in this cases and like a kind of magic it's possibile to power on immediatly the baby. (this is why i've bought a new battery...)

I do also experience this problem, after upgraded my ROM to 1.93.831.1, when I'm out of cellular reception area the phone shuts down by itself.
I bought it to HTC service centre, they say no problem was found but they reload the Rom and replaced a new battery.
The problem still persist when i enter a no Network area, the phone automatically shut down again ...
Any idea on what can I do about it?
Please advise .....

Ummhh. Having the same problem here! Read a PDA Magazine and it says all bugs from Diamond have been removed and thats why Diamond 2 is released!

***BUMP***
Need a fix quick please!
@mod: please can you sticky this for a few day?

found the problem... sent it off two tmobile and they just took the handset not the battery...
they said they found no problem and made no changes.... i received the phone after 1 month and i put the battery in and it worked fine... used it with my car charger and started again so i left the battery out of the phone for 2 days then tried and works fine now.....

Strange problem (phone hard-resets itself)

Hey everyone, I had a recent issue (not sure if it's still there) and was wondering if anyone could shed some light on what's going on. Anyway here's what happened:
I have had my Diamond for almost 2 months, I flashed a new ROM cause the one I was using (Franlov V3) was running a bit slow, I used DIBB v1.33, flashed, hard-reset and it was working ok but then it froze (or was really sluggish) so I reseted, and the phone took the reset as a hardreset, weird stuff, when it booted it was incredibly sluggish, so I turned it off, when I turned it on, bam, another hardreset. And well it pretty much entered a hardreset cycle.
I thought it was a problem with DIBB's ROM so I changed to another ROM and whenever I reseted ,the phone hardreseted. And this has been going on with multiple ROMs.
I searched and found a possible solution: leave the phone overnight without battery then reflash HardSPL, Radio and ROM, I did that yesterday...and had the same issue, till I flashed Dutty's 3.6, the only problem now is that drop-down lists, don't drop down. Any help (so it doesn't happen again) would be really appreciated.

I have the same problem
¿Did you solve it?

aemilius said:
¿Did you solve it?
Click to expand...
Click to collapse
...I hope, he's found the solution --> http://forum.xda-developers.com/showthread.php?t=490182&highlight=strange+problem+solved&page=3
post#22
CU

diamond2 needs reset to wakeup! Please help!

Happened this morning, I noticed that my diamond2 is not responding when pressing the power button as usual... black screen!
It wakes-up in two cases:
1. soft reset with the stylus.
2. removing the battery and putting it back then pressing the power button.
This happens after I leave it turned off for 5 minutes. It is working fine as long as I don't turn it off. When it is off 5 minutes then no response!
Note: I am using the latest htc rom.
Don't know if this is a software or hardware problem. Any help is much appreciated.

I have actually had a fairly similar problems with my TD2. Not regular and not at spercific times like after 5 minutes but there have been times when my screen doesn't want to turn back on, the device is still on because it still make some of the regular sounds, eg the ping on the home button but the screen is dead.
Like you it will only wake again after a battery out reset, sometimes after several attempts.
I'm pretty sure this is hardware related as like you i'm on an official rom. The first time this happened was after using the phone as a modem and it got quite hot so i think perhaps heat is loosening the connection to the screen, only a guess though so any other opinions welcome.

After trials for 8 hours, I figured out a work around.
I Forced the mobile to work in the GSM only band, from that moment, it is back to normal... 3G is important to me, but I think I will wait until the WinMobile 6.5 is out for our TD2... may be this will solve the issue!

Hard reset it at least once..... That may take care of the freezing issue.

tomtommy306 said:
Hard reset it at least once..... That may take care of the freezing issue.
Click to expand...
Click to collapse
did not solve the problem! could this be a network problem or the device's radio rom?

My phone did the same, i disabled the TouchFLO and it worked Fine

mkh1983 said:
My phone did the same, i disabled the TouchFLO and it worked Fine
Click to expand...
Click to collapse
This one also did not solve the problem. Any other suggestions!

Problem solved
As I guessed, it was a network error and problem sovled after changing my Sim Card and getting a new updated one from the Service Provider!
Now my TD2 can sleep well and get back whenever called

6.5 is out, has been out for a while now for the TD2...What are you waiting for, might solve this issue...gogogo!

Free Man said:
6.5 is out, has been out for a while now for the TD2...What are you waiting for, might solve this issue...gogogo!
Click to expand...
Click to collapse
I have the same problem and i notice that sleep everytime who i use Alarm(clock)...
Noticed that??????

Some times alarm clock sound doesn't work.... the audio level is high...

Free Man said:
6.5 is out, has been out for a while now for the TD2...What are you waiting for, might solve this issue...gogogo!
Click to expand...
Click to collapse
I am afraid I have to bump the thread.. I received my device from the HTC service with a new 6.5 ROM installed, and I started having this problem. The deviced sleeps and does not react to pressing Power button, neither to pulling the stylus. The only way how to wake it is to remove the battery and switch it on again. Any idea how to solve this?

The same problem
cassper1 said:
I am afraid I have to bump the thread.. I received my device from the HTC service with a new 6.5 ROM installed, and I started having this problem. The deviced sleeps and does not react to pressing Power button, neither to pulling the stylus. The only way how to wake it is to remove the battery and switch it on again. Any idea how to solve this?
Click to expand...
Click to collapse
My TD2 starts the same problem . After some standby time the power button stops working. I tryed to re-flash ROMs , Hard Reset, Change the battery, and nothing solve the problem. The Power Button not working! The only way is soft reset... Any idea?

This is referred to as the "Standby of Death"
The only fix I am aware of is to flash a custom ROM.

hello guys. there is no need to flash a new rom. i had same issue, but hard reset and backup restore helped me. try this on your phone. for back-up, use sk tools
http://www.s-k-tools.com/index.html?sktools/m_feat.html

[PROMBLEM] Diamond stuck in restart loop.

I believe my battery ran dead and i didnt notice, now my when you press the power button the blue o2 loading screen comes on then about 2 seconds later the device restarts and same thing over and over.
If i plug a an ac adpater in (i've tried 2 and an incar charger) the light ring goes up twice then then phone triggers a start up and gets stuck in the loop. I've tried leaving it in this loop for 10mins see if it would charge the battery but no luck.
I have tried doing a hard-reset 3 times now it says its done ok soon as i press vol up to boot it goes into the loop.
Is there anyway i can charge the battery if this is the case or is there another problem thats causing this?
Any help would be appreciated.

Are you sure the battery is dead?
If you left it in the loop for 10 mins I would have thought that it would flatten it such that it doesn't light up at all.

I know the battery was very low before it started doing this and i hadnt installed anything new in months.
Usualy on the o2 screen it shows red writing at the top and bottom, its not showing that right now if that means anything.
Its a stock o2 uk rom with no changes to the radio and official battery.

I've just installed the latest rom from the o2 website (keeping it stock incase i need to send it off to them) and still doing the reboot on startup thing.
Contacted o2 see what they say but if anyone else has any ideas im open to suggestions

i've got the same issue and the battery won't charge ...i suppose it could be a battery issue, but i'd be sure about it prior to buy a new battery..

Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed

SMeK said:
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
Click to expand...
Click to collapse
did you use a modified rom? ..i was told htc repairs only unmodified products, could you gimme more information about it?

No it was not a modified rom, default o2 xda ignito rom.

Me too!
I had the same issue. I tried soft-resets, hard-reset, swapping batteries with another phone (even tried warming the battery in my hands which was suggested somewhere!), reflashing a couple of different ROM's, including Shaks 4.30 and the latest Telstra ROM (2.07.841.2 WWE). I tried using MTTY to reflash the ROM, and reflashing using the DiamonCustomRUU.exe from the PC. (OliNex 1.40 SPL). All of the reflashes were in Bootloader mode (hold pwr and vol down) because I couldn't get it to the point of ActiveSync connection.
Nothing would work.
The winning step that bought me the joy (and relief) I was looking for was downgrading the radio from 1.09.25.23 to 1.00.25.05.
Also, I'm not sure if it is related, but I think the reset button under the stylus is stuffed because pressing it doesn't do anything.
Now I've escaped the reboot loop from hell, I'll run it for a few days before giving it back to my boss! If anyone's interested, I'll update you in a few days.
HD.

could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error

yves_the_man said:
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
Click to expand...
Click to collapse
I had to install the radio in Bootloader mode (hold pwr and vol down), but there was no issue with the install after doing this. Have you checked this thread? I don't know if that thread will help you fix your issue but it might be worth a look.
What exactly was the error message? Perhaps a search on that error message will help you.
HD.

I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is

Not really on topic, but...
yves_the_man said:
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Click to expand...
Click to collapse
262 isn't an necessarily an ActiveSync problem, more of a connection problem. Try post 9 here. Or try uninstalling Active Sync altogether and installing radio and ROM via MTTY. Since it is a connection problem, you could even try a different USB cable.
But I suggest you post 262 queries here, here, here or here.
BTW, Are you using XP?
HD.