I had a big problem.
my p3600 on the boot says: NO GSM...no radio is intalled!
and then remaing on splash screen and never start up windows.
please help me
Related
HELLO, MY P3600 (TRINITY) DOES NOT SET OFF PIU' OR BEST JAMS ON the SHIELDED one WHERE E' LOGO HTC AND DOES NOT MAKE ME There TO ENTER IN the SYSTEM.
I HAVE MADE 2000 SOFT RESET NOTHING,
REINSTALL 4 TIMES ROM AND E' ALWAYS the SAME PROBLEM
YOU HELP ME,
HELLO..
You really should learn a little more english or switch to an italian forum. And you shold STOP WRITING IN BIG LETTERS BECAUSE THIS NOT POLITE!
- when you turn the device on what do you see: No GSM?
- how far is it booting (splash screen/windows ce)
- when you start in 3 color screen what version numbers can you see?
Problem Start Htc Trinity
how far is it booting (splash screen/windows ce)
NO ENTER IN WINDOWS CE
HELP ME!!!!!!!!!!!!!!!
- when you turn the device on what do you see: No GSM?
Problem Start Htc Trinity
- when you turn the device on what do you see: No GSM?
NO GSM
NO WINDOWS CE
YES
If NO GSM you either can send it to HTC service they can reflash the radio ROM chip directly.
And next time observe caution.
The problem you describe sounds like YOU cancelled a ROM update in the middle (e.g. when it was looking stuck but in fact it wasn't you cancelled the update or you removed tha cable).
problem start htc trinity
how I make to resolve the problem?
tankyou
And i have this problem, when power on the pda i see No GSm, d v3.00 ....
From where comming my problem? i make hard rest but nothing... reflash with other room (6.0) and again nothing. But some time the pocket freezed.. and i don't know ... if i flshed the radio module will be OK. or maybe have some hardware problem, becouse haven't radio modula + freezed some time...
Hey guys, not sure if ya can help, or if this has been asked before
I recently got an O2 xda stellar(kaiser)
i used to have a trion
Now I had installed the Hard SPL, then unlocked the CID , so boot screen now says at the top "security unlocked", and I have put a Schaps 4.30 FULL ROM ON, and it all works graet.
However the phone still boots up first displaying the O2 splash screen , then a HTC splash screen before the windows mobile splash screen
Does anyone know how to get rid of the O2 boot screen?
Thanks
if you had put in some effort to find the answer yourself, you would have seen "Flashing Custom Splash Screens" in the wiki and obtained this link
http://forum.xda-developers.com/showthread.php?t=334907
Hi,
I have trinity and after OS and radio upgrades I noticed that the phone function doesn't work anymore - when turning on the device it shows "no gsm" sign. Afterwards it wouldn't boot in OS anymore - I tried to flash different OS and radios, but with no success - it stucks at 0% when trying to flash radio. I'm able to flash OS, but it won't let me past boot screen anyway!
I have flashed HARD SPL and also unlocked the device with unlocker.
What are my options - how to flash the radio?
Thanks!
DO I REALLY HAVE TO THROW OUT THE PHONE?
how can I flash gsm if the radio bootloader is corrupt?
same problem
hi karlux i`m having same problem did you find a solution for yours?
Hi, it seems that there are several cases when it's not possible to flash the radio back to Hermes.
So the devices stays in NO GSM state and you can use the as a PDA only - and the NO GSM error makes it to work realy bad - with a lot of errors - like: can't install some software, hungs up etc.
Hi guys,
I have updated my HTC Wizard (MDA Vario) to a new radio rom.
I downloaded the rom on the website of T-mobile.nl
Now my smartphone rebooting hisself.
If i turn him on, i get the splash screen but he don't show a radio version. A minute later i get a lot of stripes on my screen and he reboots again and again and again.
who can help me???
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
RVerverda said:
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
Click to expand...
Click to collapse
You must SPL, do you have? 3.29 at least
you must have a radio newer than 1.70.X (use 1.70.18.02), didn't you read the thread "how to replace windows mobile with android" ?
If you can't update radio through the SD, use KaiserCustomRUU.exe: put it on a file wherever you want and put the radio you want also on the file and name it "RUU_signed.nbh". It's all on the threads man!
here's the SPL thread...http://forum.xda-developers.com/showthread.php?t=498320 USE THE SEARCH MAN!
no sound is because of no radio updated...