OK then,
I was going to get a new housing for my sad looking Ameo. They come in the standard Ameo silver or a rather smart HTC black. I already have a silver case, but here is the question.
Do the black housings, wear, scratch, or paint rub away easy? I don't want to get one and find it looks crap after six months. They ain't cheap! before anyone else says it, I know it depends how you treat it. I'm on about normal wear and tear use. How does yours look now? are there any signs of the metal underneath showing?
Regards
Jay
Black Case On The "advantage"...
Hey Jay,
I have a HTC Advantage x7501, with the black case of course, and have been using it with "typical" every-day use now for about 6 months. I have never even seen one of the silver cased "Ameo" versions of the device in person, so my review is a bit "one-sided," if you will... Also, I have a friend with whom I work with that also owns the same model as I. With saying all that, and without having experienced the silver model, I would bet the silver model would hold up a bit better on the finish due to the fact that if the silver gets scratched, the metal beneath it looks much closer to the silver finish than the black. I have a couple small blemishes on mine, and I am very particular with my mobile devices, but after using day-by-day at work and home, it has managed to get marked up just a bit. The biggest problem is, if you get a scratch on it, the metal below sticks out "like a sore thumb!"
I definitely believe that the black finish is a bit more professional looking, where sometimes the silver finishes can make a device look cheap or make it stand out.
Anyways, to give you my honest account on TWO Advantage x7501 devices (black finish) after 6 or so months of daily use, it is overall good, and neither one shows any major signs of wearing finish. Also, we both use a case that the device "slides" tightly in and out of each time you use it (without the keyboard attatched), and the device really hasn't shown any real signs of wear on the sides where it rubs the case. However, if you do happen to mark it up in any way, you will definitely notice it. Again, I am very picky, so keep that in mind, but so you have a better idea of what I am saying, I attatched a couple of pics so you can see what it looks like when or if you do scratch or mark it.
HOPE THIS HELPS!!!
-Ryan
Also Note: Only one of the devices I wrote about is pictured, but are very similar in condition, and were both purchased slightly used.
X7501 Cosmetics...
I have had my X7501 for almost 10 months now and it only has one very tiny mark on the top right corner (you have to look hard to even see it).
Since I'm also very particular about my devices (I always keep them looking new) I just used a Sharpie (permanent marking pen) to "erase" the offending mark. This works great and I would recommend it to anyone wanting to touch-up black anodized aluminum like the Athena housing.
Wow! thanks for the reply Guys, Ryan that was one hell of a reply. Must have took you a while to do that and I appreciate it. toyfreak, the idea with the marker pen is a great one. I think on just that idea alone I will get black. Its harder to touch up silver! It looks better too.
Regards
Jay
Indeed is surprisingly hard coating, I carry mine in my pockets and can't say I'm careful with it, rather the opposite, I have it since it came out and there is only a little wear in one of the corners, hardly noticeable, where the scratches are more visible, is on the silver border next to the screen, not that it look bad or anything.
Black housing - Where?
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Silver / AMEO
Hi guys,
Proud owner of a wonderful brick since 6 months in grey color I should say that if I new I would have choosen a different color.
The grey AMEO housing is far from being "time resistant"...
Since few weeks the "video camera" around the front cam as disappeared and the "Alert" will soon do the same.
I allways take good care of my stuf and I'am bit disapointed for a 1.000 bucks machine to see it !
hmeyer said:
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Click to expand...
Click to collapse
They are available on ebay, if you search athena case you should find them. any problems then let me know. There is a guy who does spares on there and he has them in black or Silver.
regards
Jay
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
responderman said:
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
Click to expand...
Click to collapse
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
tootallk2000 said:
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
Click to expand...
Click to collapse
Forgive my ignorance, What is the difference?
Jay
responderman said:
Forgive my ignorance, What is the difference?
Jay
Click to expand...
Click to collapse
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
I need a new housing too.
Anychance you could PM me a link or contact for this.
Thanks in advance.
tootallk2000 said:
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
Click to expand...
Click to collapse
7501 does have 2 cams. the 7510 doesnt
goodluckje said:
7501 does have 2 cams. the 7510 doesnt
Click to expand...
Click to collapse
LMAO dude have you been drinking? The 7501 has 1 camera and the 7500 and the 7510 has 2. I own the 7501 which is also cheaper than the 7500. I suggest you google them and you'll see the difference.
tootallk is correct. 7501 has 1.
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
wgary said:
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
Click to expand...
Click to collapse
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
oops my bad.
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
Here you go,
http://search.stores.ebay.co.uk/sk-...shopQQfsooZ1QQfsopZ1QQsaselZ239115870QQsofpZ0
Not cheap though!
Jay
P.S if im in trouble "Madbird" made me do it
Does anyone know how much HTC UK charge to replace the housing (not the screen or battery cover) of a HD2?
I would like to get mine changed but HTC UK want me to send in the phone before they will give an price!
Ouch! I hope you like the results... I'm curious about the price of that too. It's a bit early, but you might find a parts-only phone with a smashed screen or something and a suitable body.
go to truesuppliers webpage they have them for 80.00
brokendojca said:
go to truesuppliers webpage they have them for 80.00
Click to expand...
Click to collapse
Do a google search before you buy there. I've read they sell cheap/poor quality stuff.
Looking too now. Mine has developed a crack that has spread from the battery slot to the edge of the screen.
i rang htc uk last friday asking about this. they said they could pick up the device next day. repair time would be 10 days. cost to replace all plastics (by this i assume they mean the main housing/battery cover. possibly the main body of the phone as well) £65. probably best to call them yourself to check that price. they said they would be in touch to let me know the price when the damage had been assessed by an engineer.
i didnt bother with this as my housing only has superficial damage so went looking for a good replacement. got one on order now. when it comes i'll post up a pic. check my thread for updates. http://forum.xda-developers.com/showthread.php?t=851273
thought id post up on here as i have done on the hd2 forum as to where people out of warranty, not under contract or not wanting to risk some of the crap on ebay can find genuine spare parts for this phone?
i myself would like a battery cover and rear housing but cannot find anywhere that will sell one. are phone companies just making phones now and not parts to go with them and leaving it up to 3rd parties to make knock off goods?
others threads where people have tried htc directly have been unsuccessful. my provider doesnt want to help and i dont want to part with hard earned cash for ebay items or similar as they all say they are genuine items but have subtle differences each time.
anyone help?
theblueflash said:
i myself would like a battery cover and rear housing but cannot find anywhere that will sell one. are phone companies just making phones now and not parts to go with them and leaving it up to 3rd parties to make knock off goods?
Click to expand...
Click to collapse
I bought a replacement battery cover here: http://www.netimes.com/shop/original-htc-hd2-battery-cover-p-2564.html?cPath=80_731
It appeared to be a genuine part and worked well.
You can find the housing parts here:
http://shop.brando.com/search.php?keyword=hd2&Submit=Product+Search
Note that they also sell the battery cover but slightly dearer, the reason why I didn't purchase from them. However, I have purchased other products from them in the past and they are trustworthy.
http://www.htcaccessorystore.com/uk/p_htc.aspx
Battery cover -
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=195872
It will be very difficult to find more genuine shop ;-)
filohipo said:
http://www.htcaccessorystore.com/uk/p_htc.aspx
Battery cover -
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=195872
It will be very difficult to find more genuine shop ;-)
Click to expand...
Click to collapse
cheers for all the links. none look too promising though. as for the htc store. they have a battery cover but nothing else. i need the main housing. found one from another shop. i will post up pics and details when it arrives. looked pretty good in the picture.
just kinda curious,since we are able to replace the lcd screen ourselves,is it even possible to say upgrade it to a SAMOLED screen?
amazon has the orginal battery door for 12 USD
Greetings,
I am planning to buy a replacement screen for my Z1, so that I can replace it myself.
I have 2 choices:
https://www.replacebase.co.uk/sony-xperia-z1-replacement-lcd-touch-screen-assembly-black-original/
https://www.replacebase.co.uk/sony-...lass-assembly-with-frame-black-original-4419/
The second one includes the frame. Which one is easier to replace, are there any advantages or disadvantages?
Also have you ever used the e-shop? I have read good reviews about it and since it is in EU I don't have to pay any tax.
Thanks for you responses.
tadeas482 said:
Greetings,
I am planning to buy a replacement screen for my Z1, so that I can replace it myself.
I have 2 choices:
https://www.replacebase.co.uk/sony-xperia-z1-replacement-lcd-touch-screen-assembly-black-original/
https://www.replacebase.co.uk/sony-...lass-assembly-with-frame-black-original-4419/
The second one includes the frame. Which one is easier to replace, are there any advantages or disadvantages?
Also have you ever used the e-shop? I have read good reviews about it and since it is in EU I don't have to pay any tax.
Thanks for you responses.
Click to expand...
Click to collapse
from my experience of rebuilding this handset ide go for the link below the reason why i say this not only you don't need to pick and clean the glue from the glass and frame so the glue is stuck right to bond to create a water tight seal this is all done for you and the lcd is fitted by them so not a lot can go wrong for the price of a couple of £ more what would cost about the same
https://www.replacebase.co.uk/sony-...lass-assembly-with-frame-black-original-4419/
but if your a hands on person and like a challenge with the thought is it water tight then i'm also all for the other link
i am not to sure about the shop tho but i will be saving it in my list of favs as it looks like a good shop you found
tennysonmobile said:
from my experience of rebuilding this handset ide go for the link below the reason why i say this not only you don't need to pick and clean the glue from the glass and frame so the glue is stuck right to bond to create a water tight seal this is all done for you and the lcd is fitted by them so not a lot can go wrong for the price of a couple of £ more what would cost about the same
https://www.replacebase.co.uk/sony-...lass-assembly-with-frame-black-original-4419/
but if your a hands on person and like a challenge with the thought is it water tight then i'm also all for the other link
i am not to sure about the shop tho but i will be saving it in my list of favs as it looks like a good shop you found
Click to expand...
Click to collapse
Thanks for your reply, I already ordered the one with the frame....should arrive shortly after easter, so I will post feedback on the shop here afterwards.
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
I've seen many parts on eBay for OnePlus 3 but no replacement back cover yet. They have everything else though like front glass, vibration motor, battery, antenna, speaker, camera cable.
kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Ouch, I feel your pain dude.. I would suggest maybe covering it up with a skin for the time being and when they do start making replacement backings eventually, get one then..
two months ago, seen at Aliexpress, price was around 70$, but now item is not available. Just contact with CS and ask how much they will charge for back housing replacement at RMA.
https://dbrand.com/shop/oneplus-3-skins
Try one of these in the meanwhile. I'm sure you'll find a combination that suits your style!
kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Im sure trying to replace it on your own will cause more damage to the device because you can mess up adhesives, screen, other internals & etc
And when they say they dont sell parts it means you will endup with a cheaper manufactured backcover that is not even original. Just keep the device as it is those two dots shouldnt bother you
I'll bough 2 original cases. I think it will be ok when I get them.
By the way on the teardown videos of OnePLus 3 it looks pretty easy to remove the back cover. No adhesive or something. Just removing the bottom screws will do the job.
Man, i had the absolute same problem. When i unpacked my OP3, the charger fell out of the xox and hit the phone on the absolute same place on the bezel
I sold mine on ebay the other day and ordered a new one.
it's really simple to disassemble op3. two screws, and back cover is removed. no glue, ect.
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
kenzolo said:
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Click to expand...
Click to collapse
Thank you but it's not original. It's just a chinese copy.
kamajikaciya said:
Thank you but it's not original. It's just a chinese copy.
Click to expand...
Click to collapse
That's kind of a funny comment as the OEM is a lower cost Chinese company.
nine5raptor said:
That's kind of a funny comment as the OEM is a lower cost Chinese company.
Click to expand...
Click to collapse
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
kamajikaciya said:
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
Click to expand...
Click to collapse
I know I'm late here but how do you guys suggest it would be possible to produce fake back housings at the price they are charging for them? I mean how many people would realistically buy parts exclusively made for one device, and an oneplus 3 at that? A few thousand people at most? If this is the case I don't think it would be financially viable to make any sort of production line for these parts. Aside from stealing original ones from the factory, or mabye defective ones I don't see how they would produce such a limited quantity for so cheap unless they are originals? Any insight?
There are many options for the back cover. The back on my Oneplus 3 was damaged but not as bad as yours. I was planning to replace my back but all i had was a tiny scratch so it wasn't worth it. I will change it when my back is really messed up. When you search for the cover on ebay just search for battery cover You can tell most fakes as they don't have the oneplus logo and for a different colour, try to get one with the sim card tray. Try to get a cover near Hong Kong, Shenzhen and Guangdong that's where the Oneplus headquaters is. There's also a midnight black cover as well!
Original: http://www.ebay.co.uk/itm/Battery-H...305502?hash=item3ae2de09de:g:E9UAAOSww9xZAyjH
Midnight black: http://www.ebay.co.uk/itm/Originl-M...hash=item4664c8bbfe:m:mpSJfaO-1rrmkP-ULb3a6Tg