Hello guys,
Anyone running Win7 beta? I tried both 32 and 64-bit and I cannot synchronize... I always get an error, but Windows will not give me any details on it -or an error code to go on with. I have tried uninstalling and reinstalling the device, but haven't succeeded...
Any help much appreciated!
T
Download Windows mobile device center for vista on the microsoft site
Works for me
Good luck
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
2323
That's what I'm running - in fact, Win7 downloads it automatically.
Here's what I'm getting:
Hi, I had kinda same problem. I got a message in windows help, saying that i had to start command in "admin mode", and then type:
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
When I did that, and started Win Mobile Device Center all worked perfect..
I uninstalled Windows Mobile Device Centre and then installed the downloaded one and works a treat now.
Remember guys Win7 is beta so share your findings with Microsoft
i can connect with bluetooth but not usb in win7, but i still sync with vista.
Increator said:
Hi, I had kinda same problem. I got a message in windows help, saying that i had to start command in "admin mode", and then type:
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
When I did that, and started Win Mobile Device Center all worked perfect..
Click to expand...
Click to collapse
Hm, thanks for the tip... I googled it and it seems a catch-all fix of some sorts.
In my case, the suggested key was empty. So, you can guess, it didn't work
Thanks nevertheless!
Guys, thanks for the info above, saved me a pile of time!
So... am I the only one? With two different installations of Win7 and two different ROMs it surely sounds strange...
had the same problems with win7
..then i unchecked the "faster synchronisation" option in diamonds "USB to PC " setting.
(The checkbox below "acitive sync synchronisation with outlook")
I´m using the german ROM, so the menu description might sound slightly different to what i posted ;-)
I always have this off, since it has never worked for me on any machine (either for my previous TyTNII or the Diamond). So It's been unchecked the whole time. The problem is that ActiveSync DOES recognize the device, it initiates the sync procedure and then craps out
strange
..i´m running win7 on 2 machines and the active sync stuff works without problems..
running latest udK Syrius GER ROM
Related
I have Installed windows 7 in my shift and evrey thing is working fine except the touch screen it,s not working
i have followd the instruction but still didn't work
any one can help me to make it working
regards
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
khals said:
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
Click to expand...
Click to collapse
thanks i got it working but i got another problem
if i update the display driver i get the blue screen and it keep on rebooting automaticly
any solution for this
regards
That's because AERO doesn't run at the moment at screen resolutions higher than 800*600.
Boot into SAFE MODE - Delete New Installed Graphic Card Drivers - Enable Windows 7 Classic theme in Windows and Reinstall drivers!
Can someone PLEASE reply ?
I am desperate. I deleted the HPA Partition in order to free up 3Gigs and installed Windows 7.
I followed all the tutorials, so i installed ECDriver (Vista Compatibility Mode + Run as Administrator) and Touch Screen Driver.
I mention that i see HTC Embedded Controller (in device manager) after installing ECDriver , but touch screen doesnt work (after installing touchscreen drivers) = No Pen or Touch Input is available for this Display
What am i doing wrong ?!?
I also had the same problem, so, I've installed the VGA driver from the package the way mentioned somewhere here and in the same order, as I think the new VGA driver installed with the Win7 installation is missing an important bit at the end of the installation. After that, and after a reboot, the touch started, but I did not get a calibration screen. Even without the calibration, the screen seemed to be fine. I've also disabled Aero just in case as I did not want any more blue screens.
So you have installed ECDriver, Touchscreen and VGADriver (WinVista Compatible & Run as Administrator) in this order ?
When i install VGADriver, i get a 'Cannot copy'. I thought the driver was corrupt and tried re-downloading it, but this didn't solve the situation.
How did you manage to install it ?!?
First I've installed just touchscreen driver and it did not work, so I've installed EC driver and then touchscreen and it also failed. So, I've added the VGA. I think it did not want to install with Vista compatibility so I think I forced it through with XP compatibility, got a message saying the driver was older than what I had installed, I said yes, please, go ahead! It then installed and at the end some CMD windows poped up and then closed and I then installed touch screen again. Nothing seemed to have happened then, so I've restared the computer, had all my fingers crossed (very, very technical!) and voilá, touch screen was there.
Thanks for the support. I tried several times, following exactely your steps, but i didn't manage to make it functional.
Unfortunately I had to go back to Windows Vista.
Now i have Windows 7 Vista Ultimate SP2, instead of the preistalled Windows Vista Business OEM.
Althought it's running ok, i am waiting for the final version of Windows 7 (not the RTM that i tried installing).
Win7 installed = 7 GB, Windows Vista Ultimate = 14 GB :|
Hi
Sorry to hear that it did not work for you. Like I~ve mentioned elsewhere, the only thing that did not work for me all the way is the sd card that keeps dropping from explorer.
Did I mention that I did not do a clean install? I've installed it as an upgrade and had all the functions (Wifi, BT, Phone) on while upgrading to avoid the problem some people have of the wifi connection going missing when upgrading(W7)/downgrading(XP). I've been busy at work so did not have time to use it much or test it some more.
Well, you missed to mention that
I tried a fresh install, after deleting the HPA partition (now i have 37GB Hdd, instead of 33).
Maybe that's why it didn't work for me...
A friend of mine gave my his Shift to try installing Win7 via Upgrade. Maybe it works.
BTW : Windows 7 Ultimate SP2 is running just perfect on Shift. Too bad it occupies 20GB (after drivers and updates)
The cyanogen rom 4.2.3 has USB tethering support, but I can not get it to work, mainly because of missing information/documentation.
In 'settings' 'wireless controls' there is a nice 'Internet tethering' option to switch it on. When I switch that on then my Windows XP PC shows an unknown device 'Andriod Phone' and would like to install drivers for it. Where can I get these drivers from ?
Markus
I would also like to know how the usb tethering works for a mac as well. Didnt find any information on that. Thanks in advance.
You may need to get the drivers from the Android SDK, but with regards to USB tethering, your phone should be recognised as an NDIS based network device and installed automatically by Windows. Not sure about XP, but it installs automatically on Vista and 7
Under Ubuntu Linux (from an end-user perspective), when a G1 is connected with USB tethering enabled, network manager connects as if the phone were a standard, ethernet connection.
Shane2 said:
You may need to get the drivers from the Android SDK, but with regards to USB tethering, your phone should be recognised as an NDIS based network device and installed automatically by Windows. Not sure about XP, but it installs automatically on Vista and 7
Click to expand...
Click to collapse
I have the Android SDK (1.6r1) and I point the driver install wizard at the usb_driver directory when he wants to install the device. Despite this the 'Found new Hardware' Wizard come up with 'Cannot install this Hardware'.
Markus
markusb said:
I have the Android SDK (1.6r1) and I point the driver install wizard at the usb_driver directory when he wants to install the device. Despite this the 'Found new Hardware' Wizard come up with 'Cannot install this Hardware'.
Markus
Click to expand...
Click to collapse
For xp you have to install drivers from htc sync software. Just google 'htc sync'. Should have been asked in q&a.
Nothing happens on Mac OS X 10.5.8 neither on 10.6.1
dumfuq said:
For xp you have to install drivers from htc sync software. Just google 'htc sync'. Should have been asked in q&a.
Click to expand...
Click to collapse
Isnt this Q&A? but I think this is it.... http://handheld.softpedia.com/progDownload/HTC-Sync-Download-81096.html
Im trying to get this to work also
I couldn't get it to work on my Windows XP SP2 computer at work. I get a code 10.
Guys, don't forget to use search! I've seen these issues brought up in at least 3 or 4 threads, and tons of posts.
bassderek said:
If you're running windows XP the driver isn't included on your computer. Some people have installed HTC Sync to get the drivers, personally I got them from this post:
http://forum.xda-developers.com/showthread.php?t=445436
I can confirm that the driver from that post works, I am using tethering with my laptop right now to write this post!
Click to expand...
Click to collapse
bassderek said:
Guys, don't forget to use search! I've seen these issues brought up in at least 3 or 4 threads, and tons of posts.
Click to expand...
Click to collapse
The search doesnt always give you what your lookin for if you dont word it a certain way man................
I think im gonna need a step by step.... I got the file... the computer recognizes the device.... But it doesn't register as a connection....
To everyone that is having problems tethering:
I was having the same issues. At first I wasn't able to get it to install, and then it would just keep saying the device couldn't start.
i found a very simple solution. I went into device manager, uninstalled all of my usb ports, and restarted my computer.
When it restarted, it automatically installed the usb drivers, and the tethering has worked ever since.
I could not get this to work either, finally after 3 days of messing with this on my work pc, I got it to work. First download htc sync from here http://www.htc.com/uk/SupportViewNews.aspx?dl_id=631&news_id=270 then unzip and install to your pc. Next tick on the option to usb tether while the phone is plugged in. It will say found Android phone Sdk or something like that. I did this on my xp pc at work that had no htc drivers previously installed. Next I went to my device manager and under network adapters you will see the yellow exclamation point, right click on that and update driver, 1st install from a specific location, 2nd Don't search I will choose driver to install. 3rd Have disk, 4th browse to C/program files/htc/htc driver/driver files/xp_86x then hit open and click ok. It might give a "stop warning" ignore it and continue. When its done installing you should be ready to go.....
badaphooko01 said:
I could not get this to work either, finally after 3 days of messing with this on my work pc, I got it to work. First download htc sync from here http://www.htc.com/uk/SupportViewNews.aspx?dl_id=631&news_id=270 then unzip and install to your pc. Next tick on the option to usb tether while the phone is plugged in. It will say found Android phone Sdk or something like that. I did this on my xp pc at work that had no htc drivers previously installed. Next I went to my device manager and under network adapters you will see the yellow exclamation point, right click on that and update driver, 1st install from a specific location, 2nd Don't search I will choose driver to install. 3rd Have disk, 4th browse to C/program files/htc/htc driver/driver files/xp_86x then hit open and click ok. It might give a "stop warning" ignore it and continue. When its done installing you should be ready to go.....
Click to expand...
Click to collapse
I'm so frustrated with this whole process. I've done every step you've outlined, and I still get a code 10 - cannot start the driver. And I still don't have USB tethering. What am I doing wrong?
nmw407 said:
I'm so frustrated with this whole process. I've done every step you've outlined, and I still get a code 10 - cannot start the driver. And I still don't have USB tethering. What am I doing wrong?
Click to expand...
Click to collapse
I had the same problem with Windows XP SP2. I installed SP3 and it started working flawlessly. What are you using?
Binary100100 said:
I had the same problem with Windows XP SP2. I installed SP3 and it started working flawlessly. What are you using?
Click to expand...
Click to collapse
eeepc 901 nlited XP SP2.
I'll try and push SP3 and retry again tonight. Thanks for the heads up.
nmw407 said:
eeepc 901 nlited XP SP2.
I'll try and push SP3 and retry again tonight. Thanks for the heads up.
Click to expand...
Click to collapse
That's your problem then. Yeah update to sp3 and you will be good. I promise.
I'm running into the same tethering trouble, but appear to meet all the criteria mentioned in this thread and other threads i've come across. the bottom line is i can connect with ADB access and mount my phone's SD card via the usb connection, but tethering doesn't work under several versions of Cyanogen on my laptop. currently I have CM 4.2.12.2 on my rooted Dream. I have windows SP3 installed (installed it twice because problem persisted). I've uninstalled all the USB ports per an above post, rebooted and plugged my phone in. The laptop reinstalls the USB ports, and finds the phone as an "ADB Interface" named "HTC Dream Composite ADB Interface". I can update the drivers with the google SDK USB drivers which makes the device an "Android Phone" named "Android Composite ADB Interface" instead. With either set of drivers installed, once I go to Settings on my phone and enable tethering, the device under windows goes away and instead i get yellow question mark "Other Devices" named Android Phone. I can try to force it to use the same USB drivers but it won't install them.
With tethering turned off, i can successfully type "adp devices" on my laptop console and see that my phone is there. once i turn tethering on, the same command shows no devices.
The Dream works with tethering just fine on my windows pc and shows up as a "Network adapter" named "Windows Mobile-based Internet Sharing Device".
My laptop is a compac presario in case that matters. what do i need to do on it to make tethering work?
just found the solution. a lot of posts were talking about installing microsoft active sync. sounded pointless considering it's an android phone, but it ends up being that the drivers for "windows mobile-based internet sharing device" are part of the active sync installation. i installed active sync, plugged in my phone, enabled tethering and then the laptop installed the correct drivers and it all worked without a hitch. hope this helps others!
hamx0r said:
just found the solution. a lot of posts were talking about installing microsoft active sync. sounded pointless considering it's an android phone, but it ends up being that the drivers for "windows mobile-based internet sharing device" are part of the active sync installation. i installed active sync, plugged in my phone, enabled tethering and then the laptop installed the correct drivers and it all worked without a hitch. hope this helps others!
Click to expand...
Click to collapse
+1
This is totally the problem. I spent hours trying different ways then finally googled it and came here
Hi,
I'm posting my question overhere because of all the knowledge around the XDA forums and his members. So hopefully someone can help me.
Yesterday I started to unlock a Medion MD96260 navigation system running on WinCe5.0. Everything went fine and I made a backup of the original navigation software. Synchronisation with Windows7 and WMDC was perfect! I've already copied a TomTom version to the device and suddenly the connection was gone.
The device gives me: Activesync error 608.
First my pc used mobile sync drivers wich was working oke.
But suddenly W7 installed Windows CE2003 drivers and after that the connection was broken.
If thried:
- Disable windows CE2003 drivers
- Deletion of all the drivers and a new installation
- Other usb sync drivers
None of all worked....
Does anyone has got a solution?
Thanks in advance, Grtz John
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Sounds like you're running a 64bit Win7. That won't work! (unless mabee virtual)
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
d-two said:
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
Click to expand...
Click to collapse
Oh, yes. I remember reading it. OK, I'm getting old!
where factory apps come from - ms_.nbf -
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
you will need the stuff from this post -
http://forum.xda-developers.com/showthread.php?t=648067
install - ER2003Edit_1_4_26.msi on pc
it will enable you to be able to open the ms_.nbf
the ms_.nbf needs to be put in the same folder as
HimaUpgradeUt_noID.exe
nk.nbf
ms_.nbf
when upgrading.
the ms_.nbf is where all the old factory programs are coming from its known as the EXTROM.
it houses programs that the factory thinks that should always be installed but not uninstalled by the public, thats why they do not appear in remove programs tab.but we do not need a lot of this stuff as we are now running WM 6.5.
the ms_.nbf that is here -
http://forum.xda-developers.com/showthread.php?t=648067
has already been cleaned of any factory placed program .cabs so you can use that one straight off,it does contain 2 splash images that you could change?
its best not too have any .cabs in ms_.nbf as you will then be able to do this -
http://forum.xda-developers.com/showthread.php?t=332215
hope helps,let us know how u got on....
still having problems with update
hi advanced'
thanks for the help' what ive done was downloaded all thos programes you advised me to.
extracted them to my desktop' installed the one that opens the rom image.
opend the rom image had a look it said i was on o2 but ive unlocked it to my network orange, but i didnt change anything just save the image and came out of the programe.
then i opened windows mobile connected my xdall to it and created a new folder in games called smart, i then copy the ms file and the himaupgrade to this folder.
which ever way i try to run this ie from my windows mobile sysc, i get the same message first it says about update and delete my old software, goes through the checking stage then says update has a problem please take out usb and soft reset device and try again.
and if i try to run it from my mobile it says there is no application associated with ms_ run the application first then openthis file from within the application.
this is driving me up the wall, also i am using windows 7 might that be a problem.
many thanks
basicbri
the HimaUpgradeUt_noID.exe was never made to run on win7 that why we have too tweek.
follow this its for xp/vista but also applies for win 7 -
http://forum.xda-developers.com/showthread.php?t=428469
when all hooked up ie. device in bootloader (you cannot update in win mobile it needs to be in bootloader mode)and all ready to run, make sure u have all 3 files in same folder on desktop pc not win mobile device...
3 files are -
HimaUpgradeUt_noID.exe - update app
nk.nbf - actual win mo 6.5 rom image
ms_.nbf - extrom image
the ms_.nbf can be opened with ER2003Edit_1_4_26.msi and just delete the o2 option from the 2 drop down and type in ORANGE then go - file - save ROM image - exit
after update app has finished make sure you do this before you start up device for first time -
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
follow the update instructions for xp on here -
http://forum.xda-developers.com/showthread.php?t=428469
even though you are running win 7 its the same,where it differs is the actual driver install,follow the guide for vista for that..
post how ya got on
thanks for your help but
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
or use the xda dev search function ???
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
basicbri said:
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
Click to expand...
Click to collapse
And i say again look in my HowTo!!!
advanced15 said:
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
Click to expand...
Click to collapse
thanks for using my version!
flyboyovyick said:
thanks for using my version!
Click to expand...
Click to collapse
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
It should not sync, to be clear.
aeroflyluby said:
It should not sync, to be clear.
Click to expand...
Click to collapse
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
If you have 32 bit windows 7 download attachment from this post http://forum.xda-developers.com/showthread.php?t=428469
unpack it anywhere but remember where it's unpacked, desktop for example.
Then put hima into bootloader mode and into crandle.
Then click on PC :
Start > Right Mouse Click on Computer > in the left you should see Device Manager link, click on this > Go to Portable Devices or something like that, there should me USB Sync or something like this > Click right mouse on it and tap Update driver > Select Browse my computer blabla > click on Let me choose someting blabla, this second option > Click DISC button > Navigate to folder where you opened this and open wceusbsh blabla > select Microsoft USB Sync or something on the list and click next > install driver > Run update and flash, lol
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
And again look in my howto's there is an description for Vista/Win7 32/64Bit
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
there will be NO icon or message in win 7 that device is connected as long as you have USB at the top of device screen that lets you know it is connected....
hi advanced'
this himalaya xdall is still giving me problems'
ive done all of these' links and downloads to up date this mo fo' but without any luck.
this has been slowly driving me up the wall, even though i have followed to the letter everything page by page.
i dont think this is going to work on windows 7'
my usb icon bottom right of my screen is showing a green and white tick that indicates that my pda is conected but not in the my computer screen, even after i followed the information.
im also getting error 101 on the himalaya ungrader, as i said before what about flashing from my sd card thats got to be worth a try.
also i would like to hear from another members that have upgraded the xdall himalaya with windows 7.
but i do think this alas is not ment to be' my destiny is drawn towards my daughters god awlfull pink mobile.
SAVE ME FROM THIS IT IS NEARLY CHRISTMAS
cheers basic
p/s anyone have any ideas you can email me on
[email protected]
it does work on win 7...done it this end load of times
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
advanced15 said:
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
Click to expand...
Click to collapse
It's ok to update without windows mobile center, you need just driver.
basicbri, if you followed my guide, you can't fail. It's really impossible to con't get it work with my manual. Try again, even if you didn't yet
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!