hello there
i´m searching for the DIAG Tools from htc for the SD Card . The are called
RAPHIMG.NBH or RAPHDIAG.NBH i think.
But I´m thinking that RAPHDIAG.NBH is the right name .......
Have anyone these files ?
Hi, pm me.
v3_player said:
hello there
i´m searching for the DIAG Tools from htc for the SD Card . The are called
RAPHIMG.NBH or RAPHDIAG.NBH i think.
But I´m thinking that RAPHDIAG.NBH is the right name .......
Have anyone these files ?
Click to expand...
Click to collapse
To my knowledge and after some research these tools are not available. Unless they are leaked by a HTC tech they never will be.
Or I could be wrong
FYI this post would have best been made and answered in the raphael software forum.
I got some many HTC exe diag files. PM and It's your's
aruppenthal said:
To my knowledge and after some research these tools are not available. Unless they are leaked by a HTC tech they never will be.
Or I could be wrong
FYI this post would have best been made and answered in the raphael software forum.
Click to expand...
Click to collapse
Agreed, and done.
Thread closed - Thx a lot i got it ;-)
v3_player said:
Thread closed - Thx a lot i got it ;-)
Click to expand...
Click to collapse
Would you share it with us?
From what I remember that's how you would upgrade your SPL via flashing even if you have HardSPL flashed.
Although I could be mistaken.
I would need the RAPHDIAG.NBH aswell, can anyone provide it?
[EDIT]
Thanks to Da_G, I got it. =)
Here. I'll post the RAPHDIAG.nbh since so many people PM'd me already for it lol.
[LINK]
n00b q
So I've seen this raphdiag mentioned a few times on the site - can someone with more experience go through exactly what this will do for you? How to install/use if needed? (screenshots etc?)
mlacomb said:
So I've seen this raphdiag mentioned a few times on the site - can someone with more experience go through exactly what this will do for you? How to install/use if needed? (screenshots etc?)
Click to expand...
Click to collapse
No screenshots since this is in bootloader mode But it is exactly what it says it is. Diagnostics tools. IT can format FAT, Debug (I think?), etc. Just put it in your storage card and boot into bootloader mode (Power + Vol Down + Stylus reset).
ok so i put it in the storage card n then bootloader but nuthin happs...wut am i doing wrong cuz im sure its user error
datt1x said:
ok so i put it in the storage card n then bootloader but nuthin happs...wut am i doing wrong cuz im sure its user error
Click to expand...
Click to collapse
Re-download. It may be corrupt.
looking for rapkdiag.nbh
i am wlinsong ,a xda's Moderator,
is there someone have rapkdiag.nbh-for RAPHAEL#K Repair Center or S58
,can u give me ,thank you much
datt1x said:
ok so i put it in the storage card n then bootloader but nuthin happs...wut am i doing wrong cuz im sure its user error
Click to expand...
Click to collapse
I'm pretty sure there can't be anything else on the SD card. Just the RAPHDIAG.nbh file.
Eric03 said:
I'm pretty sure there can't be anything else on the SD card. Just the RAPHDIAG.nbh file.
Click to expand...
Click to collapse
Not true. I flash and use raphdiag all the time on my regular microSD card with everything else on it.
So is this the way to flash rom even with locked SPL? I didnt see the clarification above, if so, how can I do that?
Also, would anyone here know how I can restore stock SPL without activesync?
I just found this on PPCGeeks: Link
Does the RUU program give you the error?? If so that was what happened with me when trying to run the manual HardSPL off the SD card. If it's stuck in the Tri-Colored screen try resetting the phone with your stylus. Try hard resetting your phone (for some reason the manual method worked for me after that) (Hold power, volume down, center d-pad button, and reset)
Here's what I did:
* Hard Reset Phone
* Download Raphael_CDMA_HSPL_037.exe and SSPLManual_Raphael.zip
* Transfer Raphael_CDMA... to an empty folder on the desktop of your VM
* Run Raphael_CDMA (but don't use it)
* Now look in the above folder and find RUU_Signed.nbh and move to the root of your SD card
* Use a file utility on your phone to rename RUU_Signed.nbh to RAPHIMG.nbh
* Put SSPLManual on your SD card and run the program
* It should now flash your SPL
* To test boot into bootloader and it should say 0.37.CMONEX
* Delete RAPHIMG.nbh
* Now to flash a custom ROM download one and find the file RUU_Signed.nbh... move it to the root of the SD card... rename it to RAPHIMG.nbh (using the phone) and enter the bootloader (hold power, volume down, and push the reset button)... it should now flash the ROM
Hope this helps... I know it can be frustrating when you don't want to screw anything up!
Click to expand...
Click to collapse
That seems a bit confusing, does this utility help?
Related
Hi,
Is it possible to upgrade my Qtek 9100 without using an USB cable but a SD card. The reason is that my mini USB connection on the Qtek is broken. So I can't connect the Qtek with my computer.
If it is possible to upgrade with a SD card can anybody tell me how.
I havn't heard of doing it this way in a while. My old T-Mobile Pocket PC Phone Edition. "Space Needle" used to be flashed this way. You would load the Rom onto the SD card and use some type of key combination at boot to load the rom... I'm not sure that it exists with this rom and hardware...
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
Is it possible to make a rom image on a SDcard out of the the ROM's availiable om this forum? And how can this be done.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
would you please tell breifly how can we have rom image on sdcard ????
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
yes i have cid unlocked imate kjam
clemsyn said:
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
Click to expand...
Click to collapse
I have CID unlocked my phone so that's no problem. But how do I upgrade with a SDcard and how to make an image on a SD card.
Who can help.
put your phone in bootloader mode (make sure you have minisd in the slot)...disable activesync on your computer by stopping wcecomm process...then plug in the phone (while it's in bootloader)..then run romupdate_115.exe (look for it in the xda ftp). Then choose the usb connection (I think it's wcusb or something)..press enter..cmd> should appear...then type r2sd all (this will backup everything in the phone to the minisdwhen it completes).
Then when you put it in the phone you want to upgrade..put that minisd in the phone you want to upgrade and put that phone in bootloader. It will ask you if you want to update and press the voice command button to upgrade. Goodluck!
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
Not as far as I know my friend ..... sorry
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
If needed, PM Me and you can send me a MiniSD card to load a rom onto for you. and I'll ship it back. Let me know which rom you want loaded, and I will do it for you.
Actually somebody with an CID unlocked wizard can create an SD image and then upload it to the website for you to upload and use but it will definitely wipe out the data on their SD.
I'm in the same boat. My miniUSB port fell in. I need to get the t-mobile ROM back onto the phone so I have a chance of repair. If anyone could upload a ROM onto the forum that will let me update using a miniSD card I’d be very grateful.
At least I’m not the only one who's USB port has broke!
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
Assuming /dev/sda is the device pointing to your SD card reader, and /tmp/sd.img is the sd card image file, in Linux you can extract it with this command:
Code:
dd if=/dev/sda of=/tmp/sd.img
And you can write it back on another SD card with this command:
Code:
dd if=/tmp/sd.img of=/dev/sda
in Windows you can use psdread.exe and psdwrite.exe, see the wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdread.exe
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdwrite.exe
If anyone makes an Original SD ROM of tmobile...Please upload it at ftp. It would help lots of people here in the forum..
Upload of stock TMobile Rom to SD card
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
peraltah said:
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
Click to expand...
Click to collapse
My file isn't from teh FTP, its from my phone. I made a b/u before I installed X's rom on day 3 of my MDA ownership. Like I said, I think there's a way to pull the image off the card, but I'm not going to spend my time looking. If some one wants to find me instructions as well as links to programs needed, I'd be glad to post the image.
Restoring Tmobile USA Rom from SD card
Thats for all the info folks it worked perfectly and I will not have to cough up any money for me voiding the warrenty!!
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
pjvieira said:
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
Click to expand...
Click to collapse
You could either use the Flash from SD method, or use this Flash Utility attached. Unzip, then copy your RUU_Signed.nbh file to this folder and flash. I apologize, I don't know whose this is, but it works for me every time. I hope it works for you...
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
pjvieira said:
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
Click to expand...
Click to collapse
I think now days, there are so many work arounds, that it's pretty hard to end up with a permanant brick.
If what I sent does not work, reply back and let us know. I'm sure someone will get it going again.
Update: If it still does not flash using the above method, then try the SD method. Make sure you have an SD Card in your Trinity and that it is NOT an SDHC Card. Be sure it's formatted FAT32 and has NO NAME. Unzip the included attachment, and copy the SSPL.exe to your SD Card's Root Directory. Then rename the RUU_Signed.nbh file from the ROM of your choice to TRINIMG.nbh, and copy it to the Root Directory of your SD Card.
Go to the File Explorer, and browse to the SD Card Root Directory and run the SSPL.exe file. This should initiate the Flash Process. Again, good luck.
On rare occasion, I've not been able to flash any cooked ROM. In this case, flash back the OEM ROM originally installed on your Trinity. After this flash, it will work again with cooked ROMs.
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Files needed for OEM ROM SD Card Flash
pjvieira said:
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Click to expand...
Click to collapse
So the SD Method did not work either? Strange, try flashing the OEM, but for that purpose, I always use the SD Card method. So far, it's always worked.
Pull the RUU_Signed.nbh from the OEM ROM and rename it to TRINIMG.nbh, (I've done this step in the Linked zip file) Copy it to your SD Card and try that method... This will flash back your radio also, so you will need to update it again if you've changed it.
For my phone, I use this ROM:
This is the Full ROM - - My Mirror of Full ROM
Click Here for the needed files
Yours might need something else, but this works for me.
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
pjvieira said:
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
Click to expand...
Click to collapse
Oops! I'm VERY sorry about that. I try to watch my spelling, but I missed it.
Glad it works now!
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
pjvieira said:
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
Click to expand...
Click to collapse
Are you able to use the USB for Sync and data transfer? Wondering if it could be a bad USB Port on your Trinity. Or cable?
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
rubbish.guy said:
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Click to expand...
Click to collapse
I have done it with an adapter, as long as it's NOT an SDHC card. My 2GB Micro SD in a Mini SD Adapter worked fine. Just be sure to follow the above instructions.
pjvieira said:
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
Click to expand...
Click to collapse
You are VERY welcome. Obviously you are not too stupid. I'm not sure others would have thought to look into the port for the bent pin. Good Work!
(I'm not 100% sure this is the correct forum, but since it is very ROM related it didn't feel all wrong to put it in here...)
Hi guys. After som serious flashing of cooked ROMs I decided for some unknown reason that I should try to restore a stock ROM. Now, being very tired as I was, i completely forgott that its probably a good idea to flash a new Stock ROM on the unit BEFORE flashing it with a signed SPL....so I just flashed the Signed SPL to the device. That in it self seem to have gone ok, because when I start the unit it say "SPL-1.15.0000". Problem is though that it also says "Upgrade ROM error, please try again"
Now, what should I do? Have tried put both signed and unsigned SPLs on the storage card and started up via the volume down/pwr button thingy, but that does not seem to do anything. I have also tried to attach the unit to a USB port when in tricolor mode ("USB" shows up on the screen) and tried the CustomRUU program. It finds the device and starts to "upgrade" (grey screen on the device with 0%) but then it just doesnt seem to get any further...
As the device was working fine with a custom ROM before I started all this, I suspect that the main problem proably is that I now have a Standard SPL with a cooked ROM, and that they collide sort of. I, as well as the Blackstone, is now stuck and I am all out of ideas what to do? Have also tried Hard and Soft resets, but that doesnt seem to change anything.
Help!
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
You can try USPL on your HD and flash a custom or stock ROM with it.
PapaDocta said:
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
Click to expand...
Click to collapse
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success. Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
Click to expand...
Click to collapse
just do uspl it will work
improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
Click to expand...
Click to collapse
bootloader mode is when you power off the device and hold the volume button down and press power till you get the tricolor screen...
so here is what you need to do .
1. remove the sd card
2. go into the tricolor mode connect your device to the pc and make sure it says (USB) at the bottom
3. run the stock shipped exe from you pc
if that didn't work then you should try the USPL version.. and there is a guide if you are using vista.. i just tried and worked fine.. here it is
http://forum.xda-developers.com/showpost.php?p=3331078&postcount=153
and the reason i'm asking you to remove the sd card because if you have a rom (blacimg.nbh) it won't let you do anything it will try to flash from the sd card and right now you don't want to do that.
and you shouldn't put any rom into the internal storage of the phone..
PapaDocta said:
and you shouldn't put any rom into the internal storage of the phone..
Click to expand...
Click to collapse
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
nicelad_uk said:
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
Click to expand...
Click to collapse
i don't think anything would happen... the file will get deleted when you flash as the rest of the files in the internal memory
Thank you everyone! The USPL thing solved it, when I did it from a XP machine! The once bricked Blackstone is not alive an kicking again!
About USPL, I saw the workaround for Vista, but downgrading a few components to make it work just doesn't seem like a safe way to do it. And I cant help but to think that it might have unwanted side affects, ie affecting system stability. But maybe I am wrong?
Going back to shipped ROM without bricking?
Hi,
After reading this thread I am now a bit worried and, as a newbie, would appreciate maybe a "simple" answer to my question.
I''ve been experimenting with various cooked ROMs after following the guide in the WIKI for installing HardSPL and then putting the ROM file (BLACKIMG.nbh) on my SD card and installing it using the power on + volume down button method.
However, I now want to revert back to the original "shipped" ROM, which I have downloaded from the list of shipped ROMs via the WIKI (I downloaded the one which closely matched what was originally on my HD - as I didn't know how to backup the actual ROM on my HD at the time).
So, my question:
How should I put the downloaded original/shipped ROM:
RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
into my HD without bricking it?! Do I just run it on my PC with ActiveSync enabled or do I need to do something to remove the HardSPL or something first?
Sorry if this has been answered previously but I get confused when a thread just makes loads of references to SPLthis and SPLthat etc.!
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
PapaDocta said:
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
Click to expand...
Click to collapse
Brilliant! Thanks for the simple answer Worked no problem!
So people around here sometimes get troubled with regular flashing that doesn't work anymore.
I'll explain my problem on this part:
I flashed to a new ROM just to find out that i didn't like the content so i wanted to flash back to TOUCH X.
I did the usual stuff to flash my phone with, Hardspl, then bootloader etc. etc.
PROBLEM!
Now all my phone seems to be doing is go into bootlader and start updating. However, after 3 seconds i get the message that the update is complete. My phone resets itself, and i found out that nothing has changed. I tried it a number of other times, without results.
Now my question is: is there any other way to do this, this is obviously not working!
post all your ideas here so other people can read this in case that they have the same problem!
Everytime you flash a ROM, you do not need to hardspl your device, only once...I would reformat your memory card,use a stock original rom and see if it will flash with that....usually the issue you are seeing is because the nbh file is not being read properly, make sure your nbh file is named correctly.I have had the issue earlier in my days where if I copied the nbh file through active sync something gets screwed in the transfer...used an external card reader and copied it to my memory card after formatting it and it went through....just some suggestions....Good Luck
Regards,
WC
didn't solve it at all.
More suggestions?
SyntheticDistortion said:
didn't solve it at all.
More suggestions?
Click to expand...
Click to collapse
seems to be your problem? ---> CLICK
Nope, didn't do anything..
Any other suggestions?
EDIT: Really a lot of thanks for anyone helping, i really would love to start flashing again!
grateful for the help arnt you..
try flashing the USB method, if it works its probably due to your memory card. (unless ur already using the usb method, then try the memory card method!)
How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?
SyntheticDistortion said:
How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?
Click to expand...
Click to collapse
well what you do is download the file attached to this post (it is available in one of the stickies but when i tried to download it, it failed so i zipped this one up for you)
extract the .exe within to where your nbh file is (not on xperia, on computer)
make sure there is no KOVSIMG.nbh on your memory card!
put your phone in bootloader (tricolour screen) and plug in via USB
run the custom_RUU.exe and follow the prompts pressing next etc.
you don't have to sync via activesync 1st like it says.
ignore the version number of the ROM just make sure your using the correct nbh and flash!
urm i think you should at least try to look at the stickies .........
this is very useful. i had problem flashing using micro sd so all my flashes are via usb.
http://forum.xda-developers.com/showthread.php?t=497511
That seemed to have done the trick people!
Thanks very much and keep up the good work!
Hi guys,
want to flash my Wizard from SD-card, but i don't know how to rename thr nbh file. Whats name i have to use and how i have to start the rgu bootloader on the device?
thx for help
Hi, not sure you'll be able to flash a new rom from SD card, unless you have the rom on another wizard. If so you can copy rom from other wizard onto SD card and transfer onto your wizard. Make sure you backup data on SD card because as soon as you load the rom image onto the card it becomes unreadable on pc. Which rom are you trying to load? hope this is of some help
MvSt said:
Hi guys,
want to flash my Wizard from SD-card, but i don't know how to rename thr nbh file. Whats name i have to use and how i have to start the rgu bootloader on the device?
thx for help
Click to expand...
Click to collapse
Unfortunately renaming the nk.nbf doesn’t work with the Wizard.
I discussed how you can make an SD image for backup and uploading “here in this thread”.
Rom flash from sd
ROM flash from SD/MMC: Without needing 2nd device
here is link
http://forum.xda-developers.com/showthread.php?t=393370
go for it
My Wizard 200 is also Dead after downgrading version 2 to 1
so now it is totaly dead ..even not go in bootloader mode also..
so if any one know how to alive my phone than please reply me
thank you
(india)
Thank you for the link I never found an alternative, I will have to look in to this.
swapniladsure said:
ROM flash from SD/MMC: Without needing 2nd device
here is link
http://forum.xda-developers.com/showthread.php?t=393370
go for it
My Wizard 200 is also Dead after downgrading version 2 to 1
so now it is totaly dead ..even not go in bootloader mode also..
so if any one know how to alive my phone than please reply me
thank you
(india)
Click to expand...
Click to collapse
First THX for this link, but it's not what i'm looking for.
Some time ago i read about only to rename the ROM.nbf into a nother name (don't know the name, i'm looking for), copy this to the SD-Card and start manually the RUU.
Than after the RUU is started you have to press the green phone button and the wizard will be flashed from SD-Card.
Know I'm looking for the name i need for the .nbf file...
As far as I know what you’re asking for can’t be done, if you find a way please do post it.
The link I posted above was the only way I knew of.
double post
Ok, I'll do.
If i don't find out the name i try your way ,
or i install MS Win Xp again...
or wait till i get my diamond and put the wizard back in the rack.