I have done a search, and can't find anyone else with this problem. I am using Dutty's Diamond v1. If the backlight goes off, or if you hit the power button, the call gets put on hold. You have to hit the power button to activate the call again. I used to be able tp push the power button, and the backlight would go off. Now, if I hit the power button (on a call), the backlight switches off for a second, then comes back on with the call on hold.
I have tried hard resetting the device and even tried another rom. The problems persists. Any ideas?
pocketbikes said:
I have done a search, and can't find anyone else with this problem. I am using Dutty's Diamond v1. If the backlight goes off, or if you hit the power button, the call gets put on hold. You have to hit the power button to activate the call again. I used to be able tp push the power button, and the backlight would go off. Now, if I hit the power button (on a call), the backlight switches off for a second, then comes back on with the call on hold.
I have tried hard resetting the device and even tried another rom. The problems persists. Any ideas?
Click to expand...
Click to collapse
Just curious if youve tried another rom as well as another radio.....
Funny you should ask.LOL. I thought it could have been the reason, so I loaded "L26KDTLB6" with radio 1.71.09.01. I even tried changing the spl, but it still does this.
I have the same problem. I don't suppose you found a solution?
Related
I can't see any similar problems on the forum, so can anyone help?
Yesterday my Kaiser's power button stopped working. In the middle of the day, not doing anything with it, installing anything or changing any settings. I took it out of my pocket and the screen was on with the power off dialog box showing (I normally keep it on standby in my pocket) The power button wouldn't put it into standby, and holding it wouldn't power it down. Intermittently the power off dialog appears on screen, if I click yes the device restarts (doesn't stay off). Everything else seems to work normally still. Soft resetting works normally. All the other buttons seem to work ok. I've tried a hard reset, but that made no difference.
Anyone else have anything like this?
no but i think ur power button seems to be stuck.. take it to ur local att store and see if they can help u out or try pressing and see it becomes unstuck.
omk298 said:
I can't see any similar problems on the forum, so can anyone help?
Yesterday my Kaiser's power button stopped working. In the middle of the day, not doing anything with it, installing anything or changing any settings. I took it out of my pocket and the screen was on with the power off dialog box showing (I normally keep it on standby in my pocket) The power button wouldn't put it into standby, and holding it wouldn't power it down. Intermittently the power off dialog appears on screen, if I click yes the device restarts (doesn't stay off). Everything else seems to work normally still. Soft resetting works normally. All the other buttons seem to work ok. I've tried a hard reset, but that made no difference.
Anyone else have anything like this?
Click to expand...
Click to collapse
I'm having the exact same problem right now. The power button definitely seems to be stuck. Can't figure out how to unstick it
About a week ago I had a similar problem.
The power button and the photo button stopped working. I couldn't turn the the device off or set it to standby.
Had to soft reset and after that it was ok again.
Draqula said:
About a week ago I had a similar problem.
The power button and the photo button stopped working. I couldn't turn the the device off or set it to standby.
Had to soft reset and after that it was ok again.
Click to expand...
Click to collapse
What do you mean by soft reset? Just pushing the little button at the botttom?
bTrizzy said:
What do you mean by soft reset? Just pushing the little button at the botttom?
Click to expand...
Click to collapse
Yep thats the ticket.
thetruth1985 said:
Yep thats the ticket.
Click to expand...
Click to collapse
Well that didnt work! Any other solution?
Is it possible to unmap the power button and map that question to another button???
This is the second Sprint Touch Diamond I've had with this problem, and I'm wondering if anyone else is experiencing it. I boot the phone fresh, then when it's done turn off the display with the power button. When I press the power button again, it turns on, and then the buttons stop working. The device is fully usable other than no buttons, including power, work. The display also stays on, and will not turn off after the normal period of time. I also noticed if I hold the power button, the pop-up for a soft reset will come up, but choosing yes does not actually soft reset it.
Has anyone else had this problem and fixed it without bringing it in?
Thanks!
Hi everyone,
I got a HTC Tytn 2 and i have a problem with it.
When i boot the phone it starts up and goes into windows like every windows mobile phone.
But when i press the standby button my screen wont go out of standby.
Only when i reset the phone it will work again.
Anyone got idea's ?
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
WGN88 said:
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
Click to expand...
Click to collapse
Have you at least tried backing up your data and doing a hard reset first ?
Yes, and i have also tried to put on a new rom and even updated the radio.
Iam a little bit out of idea's...
here are some more ideas:
1. how to test the power button: you say pressing the power button does not wake up the device once it goes to sleep. conversely, does pressing the power button put the device to sleep while the screen is on? if the power button is unable to make the device go off->on as well as on->off, then the power button is likely broken. if pressing the button achieves on->off, then the power button is probably ok and some software issue becomes more likely.
2. how to enable wake on pressing ANY hardware button: look for an option in Settings. i can't tell you the exact option because the ROM i am using does not have a link for this option, but this option does exist 100% in stock ROM and in lots of other ROMs. it contains settings like "Lock all buttons except power button" and "Keep all buttons unlocked" or something similar. by using the second option, pressing ANY hardware button while the screen is off will wake up the device.
3. you can use AE button plus to perform even more advanced button (re)mappings.
4. just to be sure that your device is really working correct, does the screen wake up when you call the phone or when you receive a text message? if it does not wake up even then, then search for "sleep of death".
Thanks for the response.
I think its a Service of Death problem.
Because when i try calling/smsing it, it wont go on
The buttons do work then...hopefully there's a fix for this problem...
Oke, i tried switching to 2G or 3G only but that didn't fix my Standby of Death.
I also bought a new sim card of vodafone so i wont get a No Sim error.
But what can i do now about it...it hangs like every 5 min...
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
WGN88 said:
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
Click to expand...
Click to collapse
Maybe it's hardware and something is coming loose
I have a strange problem, the call button and the home button work perfectly, also the arrow up, down and left do their job,
but if i press the back button, end call or right arrow button (i need to press really hard to get some sort of respone) all of them work as the back button, no matter where i click on the right side of the navi board.
when i try to call somebody, the end call button works only if i press it about 2 seconds after the call button, but once the call is conected it won't work, neither when i hold it, it's just not working, and the right arrow button i need to press about 50 times to move right, and then another 50 times...
i tried to reflash another ROM, but the problem still remains
did anyone have a similar problem?
Is this this a software of hardware problem?
Did anyone manage to solve this problem?
damir-bosna said:
I have a strange problem, the call button and the home button work perfectly, also the arrow up, down and left do their job,
but if i press the back button, end call or right arrow button (i need to press really hard to get some sort of respone) all of them work as the back button, no matter where i click on the right side of the navi board.
when i try to call somebody, the end call button works only if i press it about 2 seconds after the call button, but once the call is conected it won't work, neither when i hold it, it's just not working, and the right arrow button i need to press about 50 times to move right, and then another 50 times...
i tried to reflash another ROM, but the problem still remains
did anyone have a similar problem?
Is this this a software of hardware problem?
Did anyone manage to solve this problem?
Click to expand...
Click to collapse
To exclude, that this is a software problem do the following:
1. shut down the phone
2. take the battery out for a few seconds and insert it again
3. flash the original latest version of your provider rom (if it's a xda diamond, then flash the latest O2 rom, and so on if it's orange, t-mobile, vodafone ...)
4. after you setup the rom, make a hard reset
5. now have a look; does the issue persist? If yes, then it's shurely a hardware problem
So I've been using my HTC one for about half a year, however most of the time when i call someone or answer a call, my HTC one keeps pressing the back button. To make sure, i turned off power safe so the buttons would vibrate when pressed. When i tried calling someone with power safe off, the moment i hit call, my phone constantly vibrates as if the back button was constantly being pressed. I tried a factory reset and nothing helps. I don't know if i should send my phone back or if there is a solution to this.