Buttons quit working / not responding - Touch Diamond, MDA Compact IV General

This is the second Sprint Touch Diamond I've had with this problem, and I'm wondering if anyone else is experiencing it. I boot the phone fresh, then when it's done turn off the display with the power button. When I press the power button again, it turns on, and then the buttons stop working. The device is fully usable other than no buttons, including power, work. The display also stays on, and will not turn off after the normal period of time. I also noticed if I hold the power button, the pop-up for a soft reset will come up, but choosing yes does not actually soft reset it.
Has anyone else had this problem and fixed it without bringing it in?
Thanks!

Related

all calls get put on hold

I have done a search, and can't find anyone else with this problem. I am using Dutty's Diamond v1. If the backlight goes off, or if you hit the power button, the call gets put on hold. You have to hit the power button to activate the call again. I used to be able tp push the power button, and the backlight would go off. Now, if I hit the power button (on a call), the backlight switches off for a second, then comes back on with the call on hold.
I have tried hard resetting the device and even tried another rom. The problems persists. Any ideas?
pocketbikes said:
I have done a search, and can't find anyone else with this problem. I am using Dutty's Diamond v1. If the backlight goes off, or if you hit the power button, the call gets put on hold. You have to hit the power button to activate the call again. I used to be able tp push the power button, and the backlight would go off. Now, if I hit the power button (on a call), the backlight switches off for a second, then comes back on with the call on hold.
I have tried hard resetting the device and even tried another rom. The problems persists. Any ideas?
Click to expand...
Click to collapse
Just curious if youve tried another rom as well as another radio.....
Funny you should ask.LOL. I thought it could have been the reason, so I loaded "L26KDTLB6" with radio 1.71.09.01. I even tried changing the spl, but it still does this.
I have the same problem. I don't suppose you found a solution?

Screen problems

I am using the ROM [ROM][29JAN10]Gen.Y D2X R2.1[WM6.1 21056][UC][SENSE2.5][WWE|GER|NLD|ITA|FRA|SPA] with Radio version:1.13.25.24
I have to mention that the problem begin using the ROM [ROM][22JAN10]Gen.Y D2 R5.3[WM6.1 21056][UC][SENSE2.1][WWE|GER|NLD|ITA|FRA|SPA].
I made a hard reset on my HTC Touch Diamond because the GPS was not working. After that I began to experience strange things with my device, the screen was starting blinking if I was pressing the action button or any button from the device - if I make a soft reset the device says ''HTC Touch Diamond'' ok, after that is the welcome screen of the ROM, but after that the screen of the device goes off and I need to press the power button several times to see anything on the screen. After that if I am trying to access anything using the buttons from the device, the image on the screen starts to blinking and only if I press the power button to turn off the screen and after that to press again the power button to turn on the screen, the screen comes to normal. Until making the hard reset I never had this kind of problems. What is happening with my device?
These look like software problems. Have you tried flashing a non-Gen.Y ROM?
~codeslicer
I would try that if I even could connect the device to my computer and be recognize. I don't know what happened either with the computer or either with the device because the device is not recognize by the computer.

HD7 reset not working

Here's the problem with my HTC HD7, I have used it for sometime and today I did a reset going to settings->about->reset. The phone came back straight to the home(tiles) screen without starting through the Windows setup screens. It then restarted by itself and after that it is pulling back all of my old contacts, old messages & mails. I also did a factory reset using the Volume Up/down & power buttons but the same story.
Anyone think of what's going on? do you think the internal memory corruption or something?
thanks in advance,
TZ
could try this......
Resetting using the hardware buttons
You can also use the buttons to perform a hard reset. This comes in handy if the screen is frozen and you can’t access the phone.
1. Turn the phone off. If it’s frozen or unresponsive, pull then replace the battery.
2. Press and hold the Volume Up and Volume Down buttons and power the phone back on.
3. Continue to hold Volume Up and Volume Down until a factory reset screen appears.

Power button issue

I just discovered yesterday that my power button seem to be not working. Pressing it doesnt lock the screen and long pressing it doesnt bring up the power options. Tried wiping everything and still the issue remains. When I pull my battery and then insert it back the phone boots itself, as if the power button is pressed all the time (even though i can still click it and its not stuck). Ive been using rom toolbox for the power menu but choosing to turn off the phone makes my phone have a screen freeze, all other options work like reboot, fast reboot, reboot recovery etc. Anyone know how to fix this?
Edit: After a couple of days my power button is working again
Kcube989 said:
I just discovered yesterday that my power button seem to be not working. Pressing it doesnt lock the screen and long pressing it doesnt bring up the power options. Tried wiping everything and still the issue remains. When I pull my battery and then insert it back the phone boots itself, as if the power button is pressed all the time (even though i can still click it and its not stuck). Ive been using rom toolbox for the power menu but choosing to turn off the phone makes my phone have a screen freeze, all other options work like reboot, fast reboot, reboot recovery etc. Anyone know how to fix this?
Edit: After a couple of days my power button is working again
Click to expand...
Click to collapse
How did you get it to work? Or did it started working on it's on? Thanks
I've seen that happen on mine, due to a bad USB charge port. Replaced it, problem disappeared.
Any chance your device sometimes thinks it is docked to a docking station?
Inexpensive part to obtain, less than 10 dollars (usd), takes about 15 minutes or less to replace.
In the 2+ years I've had mine, I've gone through 4 of them LOL...I'm hard on charge ports I guess.
Kcube989 said:
I just discovered yesterday that my power button seem to be not working. Pressing it doesnt lock the screen and long pressing it doesnt bring up the power options. Tried wiping everything and still the issue remains. When I pull my battery and then insert it back the phone boots itself, as if the power button is pressed all the time (even though i can still click it and its not stuck). Ive been using rom toolbox for the power menu but choosing to turn off the phone makes my phone have a screen freeze, all other options work like reboot, fast reboot, reboot recovery etc. Anyone know how to fix this?
Edit: After a couple of days my power button is working again
Click to expand...
Click to collapse
It just started working again. When I turned off my phone to place my sim back and it didnt boot up automatically, I knew the power button is working again. Pressed the power button, device booted up and the issue is gone. I dont know if mh device thinks its docked, i dont have a docking station and ive never had problems with my charging port yet.
I've been using my N7000 for 2 years and this thing happened for 3-4 times. The lock button will be like stop working, sometimes it is like being press all the time and the problem will be sorted out by itself. Normally when this happens, the phone will be laggy and will reboot by itself. Is it a common thing for this phone?how do you get your phone fixed Kcube989?

Black screen but touch screen works?

Hello, sorry if this has been answered, i did a search for black screen and didn't find the same thing.
Basically my nook hd+ is about 2 months out of warranty. When i try to power it on, i can see the screen light up but nothing is displayed (its all black and dims slightly). When i was messing with it trying to reset it, it started to read aloud the applications i touched on or button i pressed. So the touch screen is still working even though it's not displaying anything. I tried to hard reset it, by holding down the buttons and pressing the n twice, but that didn't seem to work either. Anyone got ideas?
Don't know what that is -> "holding down the buttons and pressing the n twice".
But if I had this problem I would...
Hold down the power button for >10 seconds as this completely turns off the device, then attempt to turn it back on.
And if that failed to work... let it sit and run out of battery, then plug it in to the wall usb adapter, let it charge for an hour, then try powering it on with the power button.
And if that failed to work, since its outta warranty, buy something that works.
But that's only what I would do

Categories

Resources