Related
Hey there everyone, I am pretty new to this forum so I must apologize for throwing you all into the deep end. I recently purchased an o2 XDA mini S second hand from a guy on boards.ie here in Ireland. I got the phone and really liked it because it allowed me to get rid of my Dell Axim X3i and mp3 player and keep it all in one device.
After a little bit of more research I discovered that I could remove some of the bloatware from the o2 xda mini S by just hard resetting and choosing the basic option which I than did. Still not satisfied with the overall performance of the XDA I decided to try a rom upgrade. Not wanting to do a totall overhaul I decided to just do a radio upgrade first.
My device is sim unlocked, it was like that when I bought it. I used the latest wizard service tool to CID unlock the device before I even flashed the phone. I also used the wizard service tool to change the nk.nbf file within the o2 mini S radio update into 96000000-GSM.nb. I then used this file to write to the GSM radio code (Bdk 1) according to the wizard service tool in the hopes that it would upgrade my radio version.
Well when I restarted, nothing of the sort happened, on the boot screen I noticed I was now missing my GSM version and when the phone finally got into windows mobile, it did not pick up any signal even though beforehand it could. The phone also became super slow to the point where it was unusable.
I have gone into bootloader mode subsequently after reading on this forum and tried to reflash with a number of updates with active sync disabled and nothing else running with the phone connected via usb to the pc. None of the updates would even pick up the phone or allow me to flash it.
My phone is pretty much screwed, I have a spare so it is not that big of an issue but I would like to make this usable again if at all possible. So my question is how do I flash a rom while the phone is in bootloader mode?
P.S I forgot to include the Current boot screen details:
IPL - 1.05
SPL - 1.05
OS - 1.5.4.2
Hi,
You can use the Wizard Love Rom from here http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Hey there, thanks for the advice, I did download that ROM but like I said before, none of the roms manage to flash my XDA because they all cannot seem to connect to it. Activesync does not even pick it up in windows mode, and even when I have it connected in bootloader mode via usb and I double click on the love rom, it goes through the motions but never managed to "verify the information with the pda"
Try a stock Tmobile ROM but not from bootloader. Also, I would check the activesync app on the device. Make sure it's set to use USB as the default connection method.
A few other steps to try...
Uninstall ActiveSync and install an older version. If still no go, try a newer version.
Try a different USB cable and/or USB port.
Try a different computer with XP, not Vista.
Try flashing it without the SIM card or any memory cards.
If all else fails, you can try the SD card flashing method. There are instructions in the Wiki on how to do it, but always a stock ROM.
Try this one... http://forum.xda-developers.com/showthread.php?t=311027
Updated IPL/SPL and radio 2.69
Hey Devis, I think I have come one step closer, I tried all the suggestions that you made. Except well now my phone will not even go into the operating system when I switch it on. It will boot and the version numbers show but then it just resets itself.
I tried a different usb cable and I am not using vista, tried a different pc and the same result. The one place I did have some marginal success was the sd card method.
Basically what happened is that It backed up the OS from my phone and then reloaded it, not exactly what I wanted since the OS and rom are both screwed on the phone so my question at this point is, is there anyway using the SD card method to load one of the stock roms onto my phone?
I searched around the net and found the opposite to the "r2sd all" function, would be the "s2d" function, would that allow me to flash the phone with a stock rom?
Thanks for your time, I am going to call it a night here in ireland and head to bed.
Ok, if the phone resets then you probbably have a dead/dying battery. Charge it for about an hour or so using the wall charger, not the USB cable. Try to restart it and see if you can get in the OS. I was looking in the SD card method thread and some guy was successful at restoring the image from the SD even though his OS had died. He then had a fully functional phone.
The other thing to do would be to get the image file from someone that has a living and breathing wizard, preferably one with a stock ROM. Since this method is the equivalent of making an image of a PC using Ghost, the restoration of such an image to your Wizard should work just fine.
Just make sure that the other Wizard is SIM and CID unlocked. Or just go buy a Wizard from the store, unlock SIM and CID, copy the image on the SD and flash your device. Or... since u've got a new Wizard in your hands, just take the freaking thing appart and swap the guts return the store bought wizard to the store saying that the thing just doesnt freaking work!
As for the AT commands... it is possible that s2d would workfor you, it doesn't work in my wizard. from what i have been reading it appears that the bootloader is password protected and that password is randomly generated. I haven't played long enough with it to figure out how to get the password.
It looks like you've got some "trial and error" processes ahead of you. There is a wealth of info on bootloader AT commands on Wiki, nothing for the Wizard though. But something may work... not sure.
I could try to get you a ROM dump from my Wizard but I already am on SPL/IPL 3.08 and running WM6. the SPL/IPL version alone wouldn't allow you to restore from my backup.
Hey Devis, thanks for your time, just woke up here, will work some more on the phone today and let you know what is going on
Hey Devis, I did not even get a chance to fiddle around with the phone today, from being able to switch on less than 24 hours ago, it does not even want to switch on now so I am going to officially declared it a brick and move on. Will see if anyone can fix it for me, spent way too much time already when I should be working on my dissertation, thanks alot anyway
Sorry to hear that...
I have bricked one phone myself in the past... my old Pana GD87 and I absolutely loved that phone. I know how you feel.
Good luck with your dissertation.
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
deleted post
You need to check in the bootloader(tri-colored screen) what your spl is... In order to flash a custom rom it will need to say this SPL-0.72.01OliNex....if it does not say this then you need to hardspl the phone...if you follow the instructions it is easy. Once this is done then you will need this....copy the ROM you have downloaded into the CustomRUU folder and execute the file. If this does not work....you will need to format your memory card(Fat32) and follow these instructions, plus there is a video tutorial regarding all the procedures you need....the instructions are as basic as one can get.
Good luck.
Regards,
WC
Fructis said:
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
Click to expand...
Click to collapse
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
devalian said:
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
Click to expand...
Click to collapse
You mean that no person with a general knowledge about flashing rom = busting warranty shouldnt be allowed using a phone?
How do you know anything about what i do with the phone, with what apps im using, and what im using it for?
Mind your own business and come back to the thread when you have something to contribrute.
Fructis said:
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
Click to expand...
Click to collapse
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
the guides are pretty thorough...
if you read them its clear enough...
(assuming you want to use non official Sony roms - you need to flash your hardspl so you wont get errors... (think this is where you're stuck)...
download a hardspl and flash it via activesync)
Then
copy the rom into your sd card root directoy...
rename it to kovsimg.nbh
hit the reboot switch while holding down power and the down vol button to start the update process
this is the easiest way...
but as above, if you want shortcuts for everything and dont read the instuctions clear you MAY END UP BRICKING YOUR PHONE...
Gwystyl said:
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
Click to expand...
Click to collapse
I'ts a difference in writing a post with no meaning and a post like you just did.
Example: You start a new thread, no matter what it's about. There are two guys responding.
One guy is giving you this as a answer: Lol, thats kinda noobish that you dont know how to use your phone.
The second guy answers just like you did, you gave me information and links on where and what to search for. But still points out that theres many "obvious" stuff that im asking for.
Big difference.
Back to topic. I've already figured out how to do all, i have all the files that i need.
The problem is that when i try and update the SPL to 1.00.X1 instead of thje other 1.02.Olinex (or what its called) I always get a connetion error 262.
Ive read the links that you gave me before, and it says that you need to either softreset, change usb port or reboot your computer. Guys in another thread gives the same instructions.
Still no success.
So since i've done my searching, done the exact procedure that you should do. And it's still not working. Is that still something just "obvious" to ask for?
And i apologize if i hasn't been clear enough in this thread that the phone im using is a proto. And i still haven't been confirmed by some other proto user that this method is acctually working.
I'm thankfull for all the (helpfull) responses i get. And im trying them all.
If something else comes up i will post it in this thread. No matter if its obvious or not.
Have a nice day everyone!
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
CharlieSImon said:
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
Click to expand...
Click to collapse
haha, damn, thats obvious, that i didnt think of that before. hehe, thank you!
Btw, if the phone gets into the tricolor menu, and the progressbar shows up (but still stuck at 0%) can it still be because the driver?
Thanks
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
ryousuke said:
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
Click to expand...
Click to collapse
Oh, im sorry if i didnt expressed myself good enough.
When im using X1_HardSPL i get the 284 update error.
When in using the custom RUU i get the 262 error.
So i guess the X1_HardSPL application is to change SPL?
If i cant seem to change SPL i wont be able to change rom either. Correct?
Since i have the SPL that was shipped with the phone, can i still upgrade from R1A to R3A without changing SPL?
Have you disabled any of your firewall and anti virus programs when you try using the software?
I previously always had to disable my zonealarm firewall before I could uset he spl software....
Yes I've done.
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
lrammers said:
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
Click to expand...
Click to collapse
The Phone is still a Proto.....
Therefor not accepted by SEUS
Try flashing the official Sony Ericsson ROMs first. No need to Hard-spl for those.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
And if you try to flash via ActiveSync with CustomRUU? That worked most of the times with my X1. Oh wait, that got you the error 262.
In one of your other threads someone says (or you quoted) that one of the advantages of a proto was that there's no security check, which means it might not even be necessary to use HardSPL first.
I've had error 262 a few times; just try to flash again, maybe from another computer if that's possible. You can also try to flash another rom first.
Which roms have you tried flashing? Have you tried with a freshly formatted sd-card smaller than 2 gb (although I think that won't have any effect); you can also try renaming kovsimg.nbh with all small letters, all capitals or the way you just spelled it. It might be important.
offtopic: I get your point on the reactions you get when opening new threads. Everything is simple when you now where to look or if you've done it before, but it can be very hard to find the answer when there's so much info to choose from.
That said: a topic title of something like "having trouble flashig a custom rom to prototype" sounds a bit more serious then "need massive help" with a lot of exclamation marks. That might set people off on the wrong foot.
Please help me. I am freaking out. I flashed the HardSPL last night without a hitch. It went exactly like the instuctions said it would. Then I chose a ROM that I thought I liked and I downloaded the .zip file. In the thread for the ROM, there were no installation instructions so I just followed the instructions on the HardSPL thread. I extracted the files to my PC. I made sure I had Active Sync and internet connection. I had 100% battery life. I ran the CUSTOMRUU.exe file on my PC. I followed all of teh instruction on the installer. It was almost identical to the HardSPL installer so I was feeling confident. The installer finished and I clicvked the FINISH button. My phone then turned on, vibrated quickly, and showed the Touch Pro2 screen. That is all that happened. When I sof reset, the screen goes blank and it immediately happens again. I took my battery out to try to reset it that way, but when I put it back in I don't even need to ppush any buttons. It just vibrates and goes to the TP2 screen. I looked in the bootlocker and it says:
RHOD400 32M SS-BC
SPL-1.00.01Nex
MicroP(LED) 0x0A MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
501,520 775,190
222,843 Calibrated
Serial
I have, had, a Sprint Rhodium Touch Pro2
I sucessfully flashed the HardSPL
I attempted to flash Shadowline's new ROM for Rhodium :
RELEASE_Rhodium_28014M_Shadowline
I am heading to the store now to buy a new SD card to try to flash a new ROM that way. Should I flash the HardSPL again? Is there a stable ROM that I should flash? Any warnings or tips before I start?
Thank you all for all of your posts on this site. Even though I am really frustrated and scared right now, I am still glad I learned about all of this from you.
well Shadowline Series is for GSM.
Well, you flashed a gsm rom onto a cdma device, which is bad news. Try flashing a stock cdma rom onto your device, and you may be able to recover it.
get a cdma rom from the cdma forum
What is with the recent influx of people who can't read?
You've got the right HardSPL, i.e. the CDMA one. But it sounds like you've flashed a GSM ROM. You can re-flash a CDMA ROM though, don't worry. Go to the CDMA sub-forum and have a look there for ROMs, or ppcgeeks.com (who tend to specialise more on CDMA phones/ROMs).
You're right. I should have read more carefully. I thought when I redad that you could use any cooked ROM after the HardSPL flash, there wasn't an exception. I thought that I was prepared. Please don't say any other bad thing as I feel bad enough already. I think I learned my lesson to read more carefully by the fact that my new phone no longer works. I don't need bashed by anyone trying to reinforce the point. Thanks for your responses though.
Would someone please point me to the Stock ROM download that I need to try?
bsarlo said:
You're right. I should have read more carefully. I thought when I redad that you could use any cooked ROM after the HardSPL flash, there wasn't an exception. I thought that I was prepared. Please don't say any other bad thing as I feel bad enough already. I think I learned my lesson to read more carefully by the fact that my new phone no longer works. I don't need bashed by anyone trying to reinforce the point. Thanks for your responses though.
Would someone please point me to the Stock ROM download that I need to try?
Click to expand...
Click to collapse
There you go http://forum.ppcgeeks.com/showthread.php?t=91940
Everyone makes mistakes. I remember when I first bricked my Tilt 2. Oddly it was with a Shadowline rom as well. Not my fault it was my laptop but its a bad feeling to brick a new phone.
Thank you.
Since my carrier is Sprint, I should use the Sprint ROM? I know that is a dumb question, but I don't think I can be too carefull now. I want to try to do everything right this time.
I will download the .exe file.
Extract it using WinRAR
Copy the .nbh file to the root directory of my FAT32 formatted SD card.
Change the name of the file to RHODIMG.nbh
open the bootloader page by pressing the down volume button and the soft reset button together.
"Follow the On Screen instructions to start the update" - I'm a liitle concerned
Then I restart my phone and I'm happy again.
Please let me know if there is something I am leaving out or some tip/trick I can do to prevent further damage.
Thanks again.
WHich file do I use?
I downloaded the .exe file and it has two xxxx_signed.nbh files.
Which .nbh file do I put on the SD Card?
SPL_signed.nbh
OR
RUU_signed.nbh
**EDIT**
I read that the file should probably be the RUU_signed.nbh.
Thanks again for all of the replies. I am not giving up.
The update completed successfully.
Phone is still broken.
Is there any hope?
**EDIT**
I popped out the SD card to pack everything up back in the box and the phone started!!!!!!!
THANK YOU TO EVERYONE WHO HAD POSITIVE THINGS TO SAY AND HELP TO OFFER!
I've learned my lesson.
You don't have to use a Sprint ROM, but you *must* use CDMA-specific ROMs and radio versions. Just make sure to read very carefully the details of any ROM you wish to flash. If it doesn't say then it's probably a GSM ROM and you should avoid it.
Glad it's working now though
You should consider yourself lucky lol, my first experience flashing was with my HTC Titan with nTelos (CDMA) and I never did get it working fully again after flashing... And this was after months of going back and forth with customer service, tech support, etc... so I learned my lesson... Cancelled nTelos plan, switched to T-Mobile and bought a TP2 and haven't had any problems flashing since. But I was pretty upset about the Titan after I messed it up. Didn't brick it but couldn't get over 1X speeds which kinda defeats the purpose of a smartphone lol. Glad you got it working and more importantly learned your lesson without it costing you.
bsarlo said:
The update completed successfully.
Phone is still broken.
Is there any hope?
**EDIT**
I popped out the SD card to pack everything up back in the box and the phone started!!!!!!!
THANK YOU TO EVERYONE WHO HAD POSITIVE THINGS TO SAY AND HELP TO OFFER!
I've learned my lesson.
Click to expand...
Click to collapse
the thing happens to me too although I use GSM ROMs for my GSM device. When it happens I know that it's because of the PRHODIMG file in the root of my SD which I kept in there after flashing. So like you did I get out the SD card and then start the phone. No problems. I just have to move the RHODIMG file from root of SD. It didn't always happen this way before but now it does. like you described earlier the phonescreen gets stuck with messesage in the middle "serial"
Ibster said:
the thing happens to me too although I use GSM ROMs for my GSM device. When it happens I know that it's because of the PRHODIMG file in the root of my SD which I kept in there after flashing. So like you did I get out the SD card and then start the phone. No problems. I just have to move the RHODIMG file from root of SD. It didn't always happen this way before but now it does. like you described earlier the phonescreen gets stuck with messesage in the middle "serial"
Click to expand...
Click to collapse
I am going to keep this SD card as my back-up and only keep the stock ROM on it I think. That way I will always have something to fall back on.
bsarlo said:
I am going to keep this SD card as my back-up and only keep the stock ROM on it I think. That way I will always have something to fall back on.
Click to expand...
Click to collapse
u'll have to make the stock ROM ready to flash from SD. It means the .npb has to be extracted from your stock .exe. I don't know how to do that and I suppose neither do you . What I do is I create a folder called "ROMs" and put couple of ROMs in there with their folders. When i need to flash one I just copy the RHODIMG file to the root of SD and after i finished flashing, remove the SD first, set the phone up and then insert back the SD card and move the RHODIMG file back to it's place in the ROMs folder.
Ibster said:
u'll have to make the stock ROM ready to flash from SD. It means the .npb has to be extracted from your stock .exe. I don't know how to do that and I suppose neither do you . What I do is I create a folder called "ROMs" and put couple of ROMs in there with their folders. When i need to flash one I just copy the RHODIMG file to the root of SD and after i finished flashing, remove the SD first, set the phone up and then insert back the SD card and move the RHODIMG file back to it's place in the ROMs folder.
Click to expand...
Click to collapse
Actually, WinRAR extracts the .npb file from an .exe. At least that's how I got the Sprint Stock .npb file to put on my SD card. Maybe I am misunderstanding your post though. Are you suggesting that I can't just keep the stock RHODIMG.npb file on my SD card and have that as the only thing on the card and only use that SD card as my stock ROM flash?
Similar brick of my phone
Hi guys.
I have a similar problem from the first post but I'm trying to recover my brick HTC Touch Pro 2 - TMobile GSM. I think I flashed a CDMA ROM onto my phone instead of a GSM ROM.
My tri-color screen says:
RHOD210 32M SS-BC
SPL-0.79.0000
MicroP(LED) vA
MicroP(KEY) v4
TURBO HW/TURBO SW
NO TP MFG DATA
Serial
I don't know what to do next or how to unbrick.
I tried flashing a GSM ROM through USB and microSD but it just stops at the white screen with the loading bar at 0%. It doesn't move at all. Tried so many times and just freezes at that screen.
Thanks in advance for your help.
Please help.
Did you try pulling the battery out 1 min. and then doing a hard reset? Hold down End, Send, and Power until the screen goes into the bootloader and then to the reset screen. Then press volume up.
bsarlo said:
I downloaded the .exe file and it has two xxxx_signed.nbh files.
Which .nbh file do I put on the SD Card?
SPL_signed.nbh
OR
RUU_signed.nbh
**EDIT**
I read that the file should probably be the RUU_signed.nbh.
Thanks again for all of the replies. I am not giving up.
Click to expand...
Click to collapse
Hi check this vid out on how to flash your cdma sprint device by dash
http://www.youtube.com/watch?v=te7CPM3yeUk
ps follow this link for apps themes roms for tp2 sprint
http://forum.smartphonejunkie.com/
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
crusader0071 said:
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?.
Click to expand...
Click to collapse
Just use the top three wipes available in Anon's recovery menu: Wipe System/Data (1st), Davilk Cache (2nd), Ext Partition (3rd). If you haven't partitioned your SD card into FAT32, Ext2, 3, or 4 and Linux-Swap, do so now with the Recovery menu. You must backup your fat32 first, because a total repartition will totally blank your data. Good luck!
crusader0071 said:
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
Click to expand...
Click to collapse
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
thanks for trying to help but....
hi thanks for your help but ...
i have partitioned the card via anons recovery flasher, i have set my 8gb to 96mb swap , 1.5gb ext2 and the rest is used for fat32.
i have also gone throught the menu and deleted / erased the top 3 as requested but when i install a new rom it still freezes on the g1 welcome screen? please help!
G1ForFun said:
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
Click to expand...
Click to collapse
hi i just noticed im using Hard Spl update at the moment ? how do i update to Haykuro?
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
crusader0071 said:
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
Click to expand...
Click to collapse
This is YOUR FAULT for NOT READING!!!!
You installed an SPL meant for an HTC MAGIC onto your HTC DREAM. It *CAN* be made to work, HOWEVER, you failed to read and understand what is required to actually do it safely.
SPECIFICALLY, you are stuck in boot mode 3 -- boot to recovery, and because you changed the SPL, your recovery partition is UNABLE TO BOOT.
You are BRICKED, and the only way out is to use a hardware interface called "JTAG", which requires you to disassemble the phone.
SPECIFICALLY:
You missed the part of that thread that says "MOD EDIT PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION".
I have no sympathy for you. That instruction is in big purple letters.
hi thanks for your info, do you know anyone or anywhere i can get my phone jtagged?
How could you mess it up with step by step instructions....lol...I am being dead serious....it doesn't get more clear than this.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
crusader0071 said:
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
Click to expand...
Click to collapse
Did you follow those steps when flashing the SPL? Did you even flash the radio before flashing the SPL?
It sounds like you have no idea what you did to your phone which is never a good sign (and usually means you shouldn't even be flashing custom radios/spl's/roms)
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
heres what you do
ive did this too lmao jus go here www*androidhustler*blogspot*com ( THE * ARE REPLACEMENTS FOR . BECAUSE I CANT POST A OUTSIDE LINK SO U GET WUT IM SAYING SWITCH THE * WITH A . ) THEN SCROLL DWN TO A POST CALLED THE 2010 HOW TO GET CYANOGEN LATEST. DO ALL STEPS AND DONT RUSH. IF YOURE G1 DOESNT BOOT UP PROPERLY THEN I QUIT THIS SHYT BRO. LOL FOR REAL AND IF U HAVE ANY QUESTION EMAIL ME AT [email protected]*COM
crusader0071 said:
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
Click to expand...
Click to collapse
Sigh....I would go buy another phone off Craigslist or something similar.
Next time...please read before flashing....Although I'm sure you will after the last mishap.
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
I know here in town...there are so many G1's up for sale around the $150 mark in really really nice condition.
That's where I'd be looking if I bricked my G1. Well...I'd be replacing it with a HD2 probably...lol
garok89 said:
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
Click to expand...
Click to collapse
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
details
Sleeepy2 said:
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
Click to expand...
Click to collapse
have you got contact details for ezterry? if so pm me please.
as far as i can see the jtag is still in testing?
This noob is in the UK anyways. Let him figure it out.
Wrong section, soft bricked his own phone and freaking out.
Please READ. You are from the UK so your English isn't bad. You have no excuse for not following instructions.
Ways to fix your phone:
1) motherboard replacement
2) JTAG (experts are not anywhere near you though)
3) buy a new phone
Mods please get this out of here
After looking through the varying questions concerning the same topic and, subsequently, not seeing the right answers - within the right timeframe (e.g. within the past month or so), I decided that a new thread was needed. So here's it is:
A branded G1 (mine, T-mobile, Germany) is what I want to downgrade so that it may be rooted and upgraded with a custom ROM. The problem, I am finding, is not that the instructions aren't correct. Rather, it's that a piece of the instruction set doesn't exist. Namely, the revskills.de website. I mention this because I have tried, repeatedly, to boot with the DREAIMG.nbh in order to downgrade and have consisitently (after numerous downloads from different sites) received the same error - 00028002 (or something like that) while trying to load it. I eventually learned that some phones needed a "goldcard" so I set about trying to do that. Got the CID, reversed it, etc. but the part about going to psas.revskills.de is the killer. The site is down and apparently, no other method of changing the carrier ID exists (or, if it does, the method is too ugly to mention, let alone comprehensible by someone like me, a not-so-good-programmer). Worse yet, all the instructions involving the generation of a goldcard also involve this website and consequently, because of the aforementioned down-status of the site, renders all instructions moot (Grade: D for relying on unreliable sources). So, back to the question: does a method exist outside of what I have mentioned? Where can I find it? Does it have a cost attached to it?
If you've read this far it means that full words and sentences don't confuse you (in light of so-called "l337sp33k") and I applaud you. I will applaud you even more when a well thought out and not-so-glib answer unriddled with blog cliches and platitudes can be found as a reply to this post...
Seriously, if you don't know an answer, a link to check out or someone I can refer to, don't waste your time (or mine) with a the standard "you need to read this and that rules before asking a question" reply. I have trolled through this forum and a few others for the past 2 days looking for the answers to the question of downgrading and finding not the right answers that are specific to this problem (yes, I've read thropugh cyanogenmod wiki, read through the wiki here for dream/g1 phones, gsm programmer's sites, android dedicated sites, etc...ALL of them point to revskills for the goldcard gen (except for one which allows dowloading a perl prog to compile yourself to make the goldcard - I'm not so good with perl yet)
If you need to check the website go here:
psas.revskills.de/?q=goldcard
it's not working for me, whether through proxies in the US, netherlands, britain, frnace, or germany. My only conclusion is that it has been shut down.
Thanks for you attention and I really appreciate some advice from one of you that may be able to shed more light on this.
Incidentally:
SD Card: Hama 2GB Micro SD(formatted fat32)
Droid/HTC G1 phone has been factory reset to:
Firmware: 1.6
Kernel: 2.6.29-00479-g3c7df37 [email protected] #19
Baseband ver.: 62.50S.20.17U_2.22.19.26I
Build No.: DRC 92
are you going on that non exiatent site to download the qmat thing? maybe try looking for it as a torrent file... use bittorrent or something and see if it's out there... i wish i knew how to help more, but i never needed to do anything like that...
stupid question but did you try both dreaimg files? rc29 and rc7?
both img files
Yes, I tried both. The US version gave me the same response as the European one. Tried qmat 5.0.2 and got nowhere with it (i ran out of time before I could figure out everything it could do - apart from simply reversing the cid). The only way to create a gold card seems to be through revskills...kind of a raw deal for the rest of us, if you ask me.
yeahh haha this sucks im not sure what you can do... hopefully someone sees this who can help you. sorry
I am currently trying out the alternate root method from your guide. Something's working...the build version is now CRB43 and I have cupcake (1.5) installed - I think. I shoudl be able to go through the guide in order now, right?
yeah if you have 1.5 than all you need is a custom recovery installed and you have root access... i prefer amonra recovery.. than you can flash radio and spl and go even further by flashing the newer 2825 radio and 0013d hboot
I just have to update my phone account with a data plan (forgot I didnt have one and cant sign in to google without it). Fortunately, it's cheap and takes only a day to update.
OK, so i worked the alt recovery method, but I can't sign in to google. (I used the AMON_RA recovery img.) I can't do anything now. The phone is (for all intents and purposes, bricked. I then tried to do the work around to get the wireless turned on at the touch me screen. It doesn't work. Still no root access. trying to go back to stock rom, no go. Still get the "Not Allow" 00028002 error. Haven't seen the fast boot screen lately. I try the back arrow from the boot loader screen...nothing. Even went so far as to try the HTC site boot unlocker method. HTC Sync installed, android sdk installed, etc. got the drivers in win7 x64 to acknowledge the phone being plugged in...it even recognozed (once) as the HTC Dream/G1, after that never again. This is nuts! It's funny as well as highly annoying. I'm running out of ideas and could use some suggestions...
Thanks
incidentally, the link to "DREAIMG.nbh" in the unrooting section connects to a download of the update.zip file. So, the link is misplaced or something...
good news, the gold card gen sit is back up, however, I can't connect to the phone with adb...I have tried the workaround but I guess the image on this thing is still not rooted. I'm out of ideas what to do, I cannot sign in to google (registration work around) and I can't connect with adb to all the other work to change things. This phone is hosed (and I will absolutely not go to T-mobile (in germany) they're even worse here than in the US...
Here is the link that I found for dreaming.nbh file.
http://www.megaupload.com/?d=NAAS5VBS
See if that works.
So, I am resigning myself to never getting this fixed. I have a rom I cannot access because the data plan on my sim card is for Maxxim, while the rom sets everything up as T-Mobile. Maxxim support will not give out the APN info and, to top it off, the wireless work around does not work because the cupcake dreaimg.nbh and amon_ra recovery image still do not allow root access. I'm lost, got a "working brick" phone, and I'll be damned if I go crawling back to t-mobile whether here in Europe or the US! Thanks for the help anyway...
yeah sorry bout that will fix the link, but its the same one you use to 'downgrade' on the Root method.. just brings you to 1.0, then flash the update.zip to 1.5 or 1.6...
so you cant flash the DREAIMG.nbh file? and you cant do anything via recovery?
but your device works if you had a data plan.. lol wow all i can think of is trying to flash the orange.nbh or get the DREAIMG.nbh to work..
Yeah, tried the orange.nbh as well and I get the same error for every nbh I try:
"00028002 Not Allow". It's really weird that all the nbh do not work...it's almost deliberate. The only root that worked was the alternate root, but wouldn't that have let me flash other roms? Interesting that it didn't.
Good that this G1 is a spare, but I would still like to get it working. I've found a use for it at work but it needs to be rooted. Will post back shortly with results from the DREAIMG.nbh and orange.nbh (if need be).
Incidentally:
Bootloader screen:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
SEP 2 2008
Does this give you any ideas? I can get to the recovery console but it does not necessarily mean I have root (as far as I've seen to this point). I mean, if I were able to register the phone without a data plan (using the wireless connection) I think I would be ok. I did have a point when I was able to connect to the phone via adb (but the phone was registered).
I know I don't have root because I am unable to do the <enter>reboot<enter> thing in the reg bypass method. How did that happen? -I've got no idea...
Another thought, Is there another way to install drivers on my windows machine so that the phone is recognised by adb (even though it's not regitered and I have no way of turning on debugging)? Is there a way to alter the build manifest so that USB debugging is on by default thereby allowing me to connect via windows?
Its painful to read threads like this..
Do you still have your sdcards CID from the OP?
If so using the sdcard you have the CID to make the goldcard on your computer, tben takethe orange nbh rename it to DREAIMG.nbh and place it onthe root of the sdcard.
Then flash the orage nbh and use fastboot to install the 2708+ radio/spl/custom recovery (ra or clockwork)
If you dont have the CID find a device (likely a friends phone) that can read the CID and pick up from there. (notice no adb, and only fastboot after flashing an nbh with an engenering spl)
(I didn'tsay it earlier as the goldcard site was down...)
How to I go about reading the CID on another phone? I am not too familiar with the process. I have a nokia X2. Will that work through a bluetooth connection? (it's my wife's phone and I don't want to try anything with that one until I am absolutely sure.
If you could point me at something I could read on how to do this, I would be exteremely grateful...
Thanks
the site http://psas.revskills.de/?q=goldcard is odwn for me, so I can´t create my gold card.
Any other way to access the site?
I'm following the CM guide for my inspore 4g, but when I searched this forum, this thread came up
So here's my final result:
* Followed steps in the guide for alt root method (nothing else worked but that) - gained root.
* Restarted in order to follow thorugh with the radio upgrade
* No root
* Reflash the ROM
* still no root
* Cannot connect adb to device
* Windows sees it only as USB (even after uninstalling and pointing the hardware to the Android SDK USB Drivers
So I've come into an infinite loop:
* Can't gain root without a goldcard (or some ability to take the NBH apart and modify the kernel - DEFINITELY not my strongest skill...
* Can't get a goldcard without being able to read the CID
* Can't read the CID without connecting with adb
* Can't connect with adb without USB Debugging on
* Can't turn on usb debugging without a) registering phone (no data plan) or b) having root access to type in the commands at reg screen (with SIM Card in) or initial screen (without SIM card)
I've tried every ROM I could find, used the Android Kitchen tool (to modify the ROMs I've found, adding root access), I've read every guide I could get my hands on, as well as trying to extract the nb files from the NBH (in hopes of spotting what I needed to change in order to enable the phone to come on with wireless ON). I have been unsucessful. Is the phone now a paperweight?
I appreciate and respect any suggestions (I've already thought of buying a new phone - so that suggestion is out ;-) ).
Thanks