Related
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Re: Help Please, BlueAngel not booting up, not able to upgra
todixy said:
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Click to expand...
Click to collapse
Do you have activesync 4.1 installed?
And beware that windows firewall may cause some problems too.. so turn it off before you start upgrading just to be sure.
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
xykosomatik said:
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
Click to expand...
Click to collapse
I remember closing those processes when I made my first flash... but look at the wiki from TuMa 1.2 for example:
"Flash the ROM.
* If your device is not recognized, make sure you use a fresh Windows XP SP2 or Windows 2000 SP4 installation with Active Sync 4.1."
But it's also true that it may not apply in this case. Anyway.. just trying to help.
Hi,
I tried to install Ubuntu UNR and I guess that has done some problem with MBR and my Shift-HDD.
I tried to do a FN+3, but it shows a message as "Invalid Hidden partition's boot sector data. Please restart and try F3 again. (69304410) (128)"
I tried to fo FN+10, and new copy of Windows 7. In the drive format/selection screen... it shows a message "ensure that the disk's controller is enabled in the computer's bios".
I tried to load default from BIOS - still same problem.
Kindly help.
I tried the search - but it was not helpful at an urgent search. If there is any link / advice... pleasee.......
The panic button is off...
I tried to boot and install Windows 7 again. I went into the repair mode. I saw the COMMAND PROMPT there.
I tried DISKPART and did a format of the HDD disk as in http://forum.xda-developers.com/showthread.php?t=474985
I restarted... and it is allowing me to install Windows 7 now. It is in progress in my SHIFT.
Hope this would be resolved
Thanks Thanks Thankkkssssssssssss
I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?
for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416
These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,
Is d-two's manual, the HTC service manual in you sig?
no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Sounds like you're running a 64bit Win7. That won't work! (unless mabee virtual)
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
d-two said:
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
Click to expand...
Click to collapse
Oh, yes. I remember reading it. OK, I'm getting old!
where factory apps come from - ms_.nbf -
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
you will need the stuff from this post -
http://forum.xda-developers.com/showthread.php?t=648067
install - ER2003Edit_1_4_26.msi on pc
it will enable you to be able to open the ms_.nbf
the ms_.nbf needs to be put in the same folder as
HimaUpgradeUt_noID.exe
nk.nbf
ms_.nbf
when upgrading.
the ms_.nbf is where all the old factory programs are coming from its known as the EXTROM.
it houses programs that the factory thinks that should always be installed but not uninstalled by the public, thats why they do not appear in remove programs tab.but we do not need a lot of this stuff as we are now running WM 6.5.
the ms_.nbf that is here -
http://forum.xda-developers.com/showthread.php?t=648067
has already been cleaned of any factory placed program .cabs so you can use that one straight off,it does contain 2 splash images that you could change?
its best not too have any .cabs in ms_.nbf as you will then be able to do this -
http://forum.xda-developers.com/showthread.php?t=332215
hope helps,let us know how u got on....
still having problems with update
hi advanced'
thanks for the help' what ive done was downloaded all thos programes you advised me to.
extracted them to my desktop' installed the one that opens the rom image.
opend the rom image had a look it said i was on o2 but ive unlocked it to my network orange, but i didnt change anything just save the image and came out of the programe.
then i opened windows mobile connected my xdall to it and created a new folder in games called smart, i then copy the ms file and the himaupgrade to this folder.
which ever way i try to run this ie from my windows mobile sysc, i get the same message first it says about update and delete my old software, goes through the checking stage then says update has a problem please take out usb and soft reset device and try again.
and if i try to run it from my mobile it says there is no application associated with ms_ run the application first then openthis file from within the application.
this is driving me up the wall, also i am using windows 7 might that be a problem.
many thanks
basicbri
the HimaUpgradeUt_noID.exe was never made to run on win7 that why we have too tweek.
follow this its for xp/vista but also applies for win 7 -
http://forum.xda-developers.com/showthread.php?t=428469
when all hooked up ie. device in bootloader (you cannot update in win mobile it needs to be in bootloader mode)and all ready to run, make sure u have all 3 files in same folder on desktop pc not win mobile device...
3 files are -
HimaUpgradeUt_noID.exe - update app
nk.nbf - actual win mo 6.5 rom image
ms_.nbf - extrom image
the ms_.nbf can be opened with ER2003Edit_1_4_26.msi and just delete the o2 option from the 2 drop down and type in ORANGE then go - file - save ROM image - exit
after update app has finished make sure you do this before you start up device for first time -
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
follow the update instructions for xp on here -
http://forum.xda-developers.com/showthread.php?t=428469
even though you are running win 7 its the same,where it differs is the actual driver install,follow the guide for vista for that..
post how ya got on
thanks for your help but
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
or use the xda dev search function ???
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
basicbri said:
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
Click to expand...
Click to collapse
And i say again look in my HowTo!!!
advanced15 said:
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
Click to expand...
Click to collapse
thanks for using my version!
flyboyovyick said:
thanks for using my version!
Click to expand...
Click to collapse
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
It should not sync, to be clear.
aeroflyluby said:
It should not sync, to be clear.
Click to expand...
Click to collapse
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
If you have 32 bit windows 7 download attachment from this post http://forum.xda-developers.com/showthread.php?t=428469
unpack it anywhere but remember where it's unpacked, desktop for example.
Then put hima into bootloader mode and into crandle.
Then click on PC :
Start > Right Mouse Click on Computer > in the left you should see Device Manager link, click on this > Go to Portable Devices or something like that, there should me USB Sync or something like this > Click right mouse on it and tap Update driver > Select Browse my computer blabla > click on Let me choose someting blabla, this second option > Click DISC button > Navigate to folder where you opened this and open wceusbsh blabla > select Microsoft USB Sync or something on the list and click next > install driver > Run update and flash, lol
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
And again look in my howto's there is an description for Vista/Win7 32/64Bit
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
there will be NO icon or message in win 7 that device is connected as long as you have USB at the top of device screen that lets you know it is connected....
hi advanced'
this himalaya xdall is still giving me problems'
ive done all of these' links and downloads to up date this mo fo' but without any luck.
this has been slowly driving me up the wall, even though i have followed to the letter everything page by page.
i dont think this is going to work on windows 7'
my usb icon bottom right of my screen is showing a green and white tick that indicates that my pda is conected but not in the my computer screen, even after i followed the information.
im also getting error 101 on the himalaya ungrader, as i said before what about flashing from my sd card thats got to be worth a try.
also i would like to hear from another members that have upgraded the xdall himalaya with windows 7.
but i do think this alas is not ment to be' my destiny is drawn towards my daughters god awlfull pink mobile.
SAVE ME FROM THIS IT IS NEARLY CHRISTMAS
cheers basic
p/s anyone have any ideas you can email me on
[email protected]
it does work on win 7...done it this end load of times
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
advanced15 said:
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
Click to expand...
Click to collapse
It's ok to update without windows mobile center, you need just driver.
basicbri, if you followed my guide, you can't fail. It's really impossible to con't get it work with my manual. Try again, even if you didn't yet
Hi,
I cannot flash 0.78.OliNex Hard-SPL on my new X1i: The progress bar stays at 0% until the timeout, then Error 262. I tried everything (no sd-card, no sim, hard reset, compability mode etc.), no avail.
My new X1i has the image version 1.05.932.7 (03/24/09), the bootloader reads:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
The type is AAD-380001-BV.
Radio is 1.14.25.55, protocol 52.65.25.34J, extended protocol 1.0.11809.7229.
Software ID is 1213-6439, version R3AA007, user id 1215-3303, user version R15A, content version PA10.
I noticed that the installed WME 6.1 is modified compared to the old X1. In particular, during my first attempt, a WM6.1 warning message with a red boundary popped up, indicating that proceeding could harm the phone (yes/no). I checked yes, and since then, the message does not come up anymore. Probably the ROM is not in Olis compatibility list, so I looked for unsigned HardSPL, but found only the Image Version 1.00.Diamond, so I did not flash it (probably it would brick my X1i). Any idea would be very much welcomed, I want to get rid of WM6.1 and flash WM6.5.3.
Thanks a lot for any hints.
BTW, I've posted this thread alredy in the X1 General forum and realised only now that this forum might be a better choice, sorry for that.
Next try
Hi,
I found the recommendation below and tried, but no avail as well.
Does anyone know an unsigned HardSPL by Oli for the SE X1?
Any help appreciated.
_________________________________________
xidesu
3rd August 2010, 09:33 PM
Default HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
don't flash bootloader-stuff from other devices, never! Oo
try flashing hardspl 0.72 via usb first (the old one), then flash 0.78 as an "update".
Next step, but still not working
Well, I was able to flash APP_SW_X1i_GENERIC_UK_1213-6450_CDF1215-1832_KOV_R1AA017
from the SD card, and I have now SPL0.72.0000 on my X1.
ROM Version:1.02.931.3
Date: 08/29/08
Radio: 1.06.25.29
Protocol: 52.43.25.24U
Software ID: 1213-6450
Version: R1AA017
However, X1_HardSPL still terminates with Error 262 as before. Flashing OliNex's HardSPL via SD card (RUU_Signed.nbh renamed to kovsimg.nbh) does not work either. I still cannot flash my Dynamics GTX 2.3.5 GER ROM.
Any ideas?
BTW, I tried with a desktop and a laptop, both XP SP3 and Active Sync 4.5 on various USB ports. I disabled Security Options via X1_Tweaks. Everything seems to work, only flashing HardSPL still fails.
At least, I am a step back now ;-)
Bingo!
I succeeded. The solution has been:
- Establish an Active Sync connection via USB.
- Copy the file Xperia-SSPL-Manual.exe to the root directory of a FAT32-formatted SD card (no SDHC, an elder one). SSPL-Manual is the basic part of OliNex bootloader.
- Unpack HardSPL by starting it or use RUU_Kovsky files in a directory of the PC hard disk. Make sure that the proper RUU_Signed.nbh file is in this directory (the HardSPL image by Olimex in the version you whish to complete the basic SPL started onthe X1)..
- On the X1, open the file manager and start Xperia-SSPL-Manual.exe by clicking on it. The X1 switches to the boot loader mode indicating HardSPL 0.52 by OliNex.
- On the PC connected to the X1, start ROMUpdateUtility.exe.
In my case, the flashing went very quickly to 100%, and I have now HardSPL0.78OliNex on my X1. Now I can proceed (Task29, image flashing). At least I hope so.
My assumption about the the problems I faced: My X1 had a quite recent firmware which probably blocked any change of the SPL and allowed only generic signed images to be flashed, no cooked ones. Xperia-SSPL-Manual.exe bypasses this lock by applying an OliNex cracked routine, thus allowing to overwrite the SPL. At least I think so.
Done.
My Dynamics GTX 2.3.5 GER ROM is now up and running. THX a lot for the great support of this forum!
Thanks for instructions I have same problem with my X1.
You're welcome.
It has been worth the troubles - the Dynamics ROM is great, and until now, I found no hickups.