I was wondering if there was an Autolock feature that can be added onto our phones. What I mean is if I answer a phone call on my BT headset and I end the call my phone is in my pocket going through things. I would like for it to just lock back up right after a call has ended. Is there any cab out there to allow this or something?
Maybe you should try PocketShield.
AkumaMax said:
I was wondering if there was an Autolock feature that can be added onto our phones. What I mean is if I answer a phone call on my BT headset and I end the call my phone is in my pocket going through things. I would like for it to just lock back up right after a call has ended. Is there any cab out there to allow this or something?
Click to expand...
Click to collapse
Since you obviously didn't try the search function I'm going to say nope there is no such beast.
Dane Austin said:
Since you obviously didn't try the search function I'm going to say nope there is no such beast.
Click to expand...
Click to collapse
never heard of anything like that either...
Related
After installing VC 1.6 on my Tilt, the BT has been acting weird. When I press the button on my BT headset, sometime VC activate, other time my phone just dial the previous number right a way or nothing happen at all. Then the button I programmed to call VC will stop working too.
I wonder is it because Voice Dial is interfering with Voice Command. How do I remove Voice Dila from my phone?
hey can you upload a voice command cab, so I could use it on my tilt and then I will let you know how it works, basically I am trying to steal your sotware without harming you. thanks
loaferkan said:
hey can you upload a voice command cab, so I could use it on my tilt and then I will let you know how it works, basically I am trying to steal your sotware without harming you. thanks
Click to expand...
Click to collapse
ROFLMAO! That made my day!
Maybe I stole mine from somebody else in the first place.
When you are calling someone that has another call (Call waiting), your PPC do not show in a notification or beep that the second party is having another line.
This is available on any very basic symbian phone.
Is there a cab to fix that?
Share a solution if you have one..
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
rohanmaini said:
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
Click to expand...
Click to collapse
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Ok what I think your talking about is when you call someone that is on the phone, you hear a quick beep indicating that they are on the line, correct????
If this is what you are talking about, YES it is carrier specific. For example, when I call my father on Verizon and he is on the phone with someone else, after each ring there is a small beep. This is telling me that he is on the line.
There is nothing you can do to the Tilt to change this, it is carrier specific.
True... and there are also some PBX systems that provide the ring/beep when you are the call waiting. It usually depends on the phone system of the person you're calling.
fireblade63 said:
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Click to expand...
Click to collapse
I think that is carrier specific too.. if I am calling some someone who is busy on another call, I get a completely diff to ringing tone.. Infact in most cases I get a audio message that the person I am calling is busy on another call and I should wait or call back later... Atleast thats what we have on all major carriers here in India...
ok we know that carrier has to support it, i know t-mobile does...
i used an old nokia to check and it works, it beeps and the whole screen says CALL WAITING, then it starts ringing...
i haven't seen any Windows Mobile touch screen or not that can do this
so its a carrier thing, yes t-mobile supports it.. windows mobile doesnt support it though!!!
so there is no way to make a .cab or something to fix this problem
It's not broken so how can you fix it? It's just not a feature that is offered.
it is not about the carrier. for instance when i had a nokia, when the other party was on the phone i had a beep in my phone, but with the WM devices, you cannot see that you call is waiting.
In the phone options under the advanced Tab there is the option to reject calls and generate an automatic text message; has anybodt got this to work? It simply does nothing for me. Thanks.
Anybody have this issue?
Can somebody confirm that the reject calls text message generate function works on the Diamond......Mine does not and I'm wondering is there a Registry switch. Thanks.
just trying it now, but seems just to send it to the voicemail instead. Maybe we need to turn voicemail divert off first?
would try that, but for some reason, t-mobile doesn't seem to want to let me turn my diverts off!!
Anyone on another network care to try??
rhedgehog said:
just trying it now, but seems just to send it to the voicemail instead. Maybe we need to turn voicemail divert off first?
would try that, but for some reason, t-mobile doesn't seem to want to let me turn my diverts off!!
Anyone on another network care to try??
Click to expand...
Click to collapse
How do you turn diverts off??...cant seem to find anywhere in the phone that gives you that option ie options like when busy divert calls, when out of range divert calls etc etc
start>settings>phone>services tab
highlight call forwarding and then tap the get settings button.
Voila, Call divert options
rhedgehog said:
start>settings>phone>services tab
highlight call forwarding and then tap the get settings button.
Voila, Call divert options
Click to expand...
Click to collapse
Thanks for that...would have never guessed it would be in there lol
Btw your right, i tried to disable the voicemail feature...and it didnt work...if i press the ignore button it diverts to the voicemail...hmmm strange...
i think we need someone not on t-mobile to try it. t-mo UK is a PITA when it comes to changing stuff like voicemail settings.
Don't still have my O2 sim so couldn't try that, and am working from home for a bit today so i'm kinda stuck.
Might ask one of the guys at work to try one of our other diamonds with an orange SIM and see if that does the trick....
rhedgehog said:
i think we need someone not on t-mobile to try it. t-mo UK is a PITA when it comes to changing stuff like voicemail settings.
Don't still have my O2 sim so couldn't try that, and am working from home for a bit today so i'm kinda stuck.
Might ask one of the guys at work to try one of our other diamonds with an orange SIM and see if that does the trick....
Click to expand...
Click to collapse
Its strange because on my nokia n95 8gb phone i could easily turn my voicemail on and off whenever i chose.
I did notice after i had unticked the voicemail boxes...pressed ok then exited...went back into the phone settings and saw that the boxes were ticked....as i said its strange. Because sometimes i just want the caller to hear a busy tone or the reject tone...
Hopefully someone can try with a different sim and see what happens.
it could just be that T-Mobile don't like the commands coming from the windows mobile devices then. I've only been with t-mobile since i had WM devices - about 4 years now - and i never really bothered using my other devices on the network. I think i have an old Sony Z5 around somewhere, i might charge it up and turn the voicemail off with that and then see if that helps.
rhedgehog said:
it could just be that T-Mobile don't like the commands coming from the windows mobile devices then. I've only been with t-mobile since i had WM devices - about 4 years now - and i never really bothered using my other devices on the network. I think i have an old Sony Z5 around somewhere, i might charge it up and turn the voicemail off with that and then see if that helps.
Click to expand...
Click to collapse
Could be.,..i dont know as the Diamond is my first WM device that ive been impressed with enough to keep it.
Might give tmobile a call later and see what they have to say about it. Although i dont think im going to have much luck as when i rung them uip about mms settings they said they dont support Diamond..so couldnt help me out there.
that sounds about right for T-mo customer services.
If you can get past the usual shower of muppets on first level and get through to the guys in advanced connectivity in Doxford or Greenock, they should either be able to help or refer you to someone who can....
If i have to call them now, i refuse to speak to the lower levels and ask straight for advanced connectivity. Last time i got through (back in the days when i had my magician), was cos they'd changed their MMS settings. Finally got through to AC and they had me sorted in under 2 minutes! it's just the call filterers on levels 1 and sometimes 2 that cause the problems usually.
pilib said:
In the phone options under the advanced Tab there is the option to reject calls and generate an automatic text message; has anybodt got this to work? It simply does nothing for me. Thanks.
Click to expand...
Click to collapse
I have flashed the German 1.93 update to my Touch Diamond without problems and the phone is working well -- however, I don´t have the "advanced" tab in the phone option!! (and before anyone asks, no I also don´t have the German "Erweitert" Tab there).
Anyone know what´s going on here?
I´d like to turn off the short vibration the phone makes when a call is established.
Thanks // Tom
Hi All,
I was wondering if there is any head way in regards to call waiting functioning properly. I haven't seen any posts on it lately, and therefore I am wondering if it is I who is out of the loop
JQb. said:
Hi All,
I was wondering if there is any head way in regards to call waiting functioning properly. I haven't seen any posts on it lately, and therefore I am wondering if it is I who is out of the loop
Click to expand...
Click to collapse
I was unaware this did not work. What happens?
This would be a RIL issue.
Hi,
It could just be me....but on my vogue, when I accept the other call there is no way to return to the original call (to my understanding)....
JQb. said:
Hi,
It could just be me....but on my vogue, when I accept the other call there is no way to return to the original call (to my understanding)....
Click to expand...
Click to collapse
Same. Or maybe I just don't know how to do it
works for me, I just press menu then "Hold" and switches between calls
Works for me. I just use the hardware send key
masalma said:
works for me, I just press menu then "Hold" and switches between calls
Click to expand...
Click to collapse
Hold works for me too
haha, I figured I was neglecting something simple. Thanks folks.
JQb. said:
haha, I figured I was neglecting something simple. Thanks folks.
Click to expand...
Click to collapse
What about 3-Way Calling? I cannot get that to work either...
JQb. said:
Hi All,
I was wondering if there is any head way in regards to call waiting functioning properly. I haven't seen any posts on it lately, and therefore I am wondering if it is I who is out of the loop
Click to expand...
Click to collapse
If your on sprint they **** you over with call waiting and 3way and such. call waiting works but not all the time, and it's not done by the handset, it's done with sprints servers, as far as the handset is concerned it's only one call. I have no idea how to do 3way, or if you even can.
wrath said:
What about 3-Way Calling? I cannot get that to work either...
Click to expand...
Click to collapse
how are you trying to add a call?
inertone said:
how are you trying to add a call?
Click to expand...
Click to collapse
Tried a few different ways. In CDMA you usually just dial and hit send. That does nothing, then I tried the option to add and that disconnects all. If you have the right way to do it, please share.
I hope you guys get what I mean. I used to have a Samsung Android and it shakes when calls are established. It didn't shake when I was waiting for the other side to pick up the call but it shook once at the exact moment when the other side was picking up the phone. Such a feature delays the contact between my head and the phone. Some people told me that the radiation is strong when the phone is on the 'calling' status. I don't know if this is true so I'd rather believe it.
Is there a setting in our LG Optimus Black for enabling such a feature?
Are you on a stock ROM? If yes, em sure that its not available via stock ROM but maybe there is some app out there that can work for you.
If you are on CynogenMod 7, Yes you have that function built-into the ROM. Look into settings, call settings, vibrate on answer
wiqi546 said:
Are you on a stock ROM? If yes, em sure that its not available via stock ROM but maybe there is some app out there that can work for you.
If you are on CynogenMod 7, Yes you have that function built-into the ROM. Look into settings, call settings, vibrate on answer
Click to expand...
Click to collapse
Thank you for your reply. I have the option you mentioned checked, by default. It does not variate when a call is answered. Does it work for you?
Yes mine works. I am not sure if it has something to do with haptic feedback or not but you should try to enable it too, maybe that helps.
Maybe you can use an app called CallVibrate
Works exactly the way you want on my OB.
Hope that helps.