I tried to install one the OTP i think v7.7 to my phone and it accidently disconnected. Is said repair so i did all that but now everytime i turn my phone on it say Open touch project and then it freezes. Is there anyway I can fix this??
anyone??????
It also allows me to do the Hard Reset but it still goes back to the open touch project and freezes
Does the phone connects to ActiveSync via USB before freezing and/or does it remains connected after freezing?
you can put your phone into bootloader mode (hold camera button first then power on the phone while keeping the camera button pressed) once you are in bootloader mode, you can start the RUU again
Related
after replacing a dead digitizer LCD screen, now the power button is gone...
is there an alternative way to turn the diamond on?
I have tried hitting the reset button or connecting it to the computer, but nothing worked...
the guy who fixed my phone somehow got it to run yesterday, and he told me that he did it by putting it into flash mode
did he mean bootloader mode? but without the power button, how do I access the bootloader mode?
I need your help!! THANKS!!
I have same problem. please help....!!!!!
Pull out the stylus. It should turn on automatically
Nope
That won't work if the diamond is turned off-off.
i've tested : connect your diamond on the pc, and pull off the batterie and reconnect her (2 or 3 x) and at a moment the mobile turn on.
I am using the ROM [ROM][29JAN10]Gen.Y D2X R2.1[WM6.1 21056][UC][SENSE2.5][WWE|GER|NLD|ITA|FRA|SPA] with Radio version:1.13.25.24
I have to mention that the problem begin using the ROM [ROM][22JAN10]Gen.Y D2 R5.3[WM6.1 21056][UC][SENSE2.1][WWE|GER|NLD|ITA|FRA|SPA].
I made a hard reset on my HTC Touch Diamond because the GPS was not working. After that I began to experience strange things with my device, the screen was starting blinking if I was pressing the action button or any button from the device - if I make a soft reset the device says ''HTC Touch Diamond'' ok, after that is the welcome screen of the ROM, but after that the screen of the device goes off and I need to press the power button several times to see anything on the screen. After that if I am trying to access anything using the buttons from the device, the image on the screen starts to blinking and only if I press the power button to turn off the screen and after that to press again the power button to turn on the screen, the screen comes to normal. Until making the hard reset I never had this kind of problems. What is happening with my device?
These look like software problems. Have you tried flashing a non-Gen.Y ROM?
~codeslicer
I would try that if I even could connect the device to my computer and be recognize. I don't know what happened either with the computer or either with the device because the device is not recognize by the computer.
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Drug_Store said:
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Click to expand...
Click to collapse
If you can boot windows look in my signature there is a Boot loader tool and it works on diamond i have tested it
Also there is a post for forced boot loader mode for htc prophet\wizard involves connecting power to pins manually will this work for Diamond ?
Ok finally fixed it
Explored the thing about hearing USB connecting... WIN7 would never been possible, but under XP and activesync, that was enough to connect and flash.
@wapvirus
Yes, I thought about power pinout, but could require advanced tools, which I don´t have at home...
while update my phone my notebook shut down and when I turn on my phone is frozen on the screen of HTC and nothing else. I have sent for assistance but as windows phone arrived in Brazil a little time they do not know what might be happening. The HTC Brazil wants to send my phone to the U.S. but if anyone knows what can be done to reinstall windows phone on my HD7 would be grateful.
Have downloaded several ROMS but all had ERROR 266 and that was the only error that is not found because it is happening.
have you tried flashing a new stock Shipped ROM onto your device?
Put the phone in Update/Recovery mode (turn it off, press and hold the Camera button, turn it on again, keep holding the Camera button until it goes to the black-and-white screen indicating that you should connect the phone to the PC). Connect your phone to the PC using the normal USB cable. Start the Zune software. After a few seconds, Zune should offer to restore your phone to the backup that was created prior to beginning to flash the update.
That will make the phone boot again, without losing any data. Afterward, you can try updating again. Hope that helps, good luck!
GoodDayToDie said:
Put the phone in Update/Recovery mode (turn it off, press and hold the Camera button, turn it on again, keep holding the Camera button until it goes to the black-and-white screen indicating that you should connect the phone to the PC). Connect your phone to the PC using the normal USB cable. Start the Zune software. After a few seconds, Zune should offer to restore your phone to the backup that was created prior to beginning to flash the update.
That will make the phone boot again, without losing any data. Afterward, you can try updating again. Hope that helps, good luck!
Click to expand...
Click to collapse
what if there is no backup???
Any ideas how to fix this?
It started with the phone died by itself and wouldn't turn back on at all except it can go to Sony logo when I'm charging the phone.
First thing to do was to hard rest by pressing the orange clip (didn't work) then tried pressing power + vol up button (didn't work).
Second thing was to install via flashtool. Installation was successfully done but I can't turn the bloody thing on (battery is about 60%).
Any idea? I think I just killed it.
Another issue is that the phone is always stuck in fastboot mode when connected via usb.
3r1k said:
Any ideas how to fix this?
It started with the phone died by itself and wouldn't turn back on at all except it can go to Sony logo when I'm charging the phone.
First thing to do was to hard rest by pressing the orange clip (didn't work) then tried pressing power + vol up button (didn't work).
Second thing was to install via flashtool. Installation was successfully done but I can't turn the bloody thing on (battery is about 60%).
Any idea? I think I just killed it.
Another issue is that the phone is always stuck in fastboot mode when connected via usb.
Click to expand...
Click to collapse
Any water damage? Been in water?
Clean USB port with cocktail stick or q tip with alcohol. Try again.
Not bricked. Kernel is booting if Sony logo comes up. It is something else...
EDIT: Hold power and vol up together to hard reboot the phone
hI
to rise your phone again use Sony's PC Companion-support. Follow the instructions of the application. I had the same ptob.
Thank you