Hi all,
I noticed this annoying issue with both the stock ROM and Dutty's latest... all phone calls made with either a bluetooth headset (tried with jabra JX10, GenComm ZEN, a couple crappy no-brand ones, a couple other Jabras, and even my Pioneer BT car stereo) sound pretty low and very tinny, as if the voice were coming through a string and two cans...
Any clues on how to fix this? None of my other phones exhibit this behavior.
Thanks!
try this for tinny bt sound
Yom,
I noticed this same problem with my Tilt, the sound over the Bluetooth connection in my A3 is worse than it was with my 4 year old Motorola v600.
This weekend I downloaded an update from HTC, then installed Kaiser Tweaks and Disabled the UseJointStereo function in the Bluetooth menu. To get the update from HTC you have to join the HTC e-Club:
http://member.htc.com/member/Register.aspx
The fix is listed as solving an issue with dropped calls over the BT connection, I was not having that issue but I figured installing this would not hurt.
Together these two changes have made the sound quality a little better, though still not up to par with my old phone.
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
Not having experience of this unit this may be down to the individual headset and I hope some others will come in with experience of this.
Does the headset support both Headset and Wireless Stereo profile?
If it does not, the function may not be supported. I use a Promate PM-2600 and it supports both and when I have selected Wireless Stereo (this has to be done manually!) it works without problem when answering a call and passing back to music or video play.
Hope someone with information on this particular unit gets back to you.
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Click to expand...
Click to collapse
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
jazzman-t said:
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
Click to expand...
Click to collapse
I'm facing the same issue as well! Tried numerous hard resets and fixes you would have thought imaginable! Unfortunately the problem is still existent and it is freaking irritating when you have to press the play button to repair the headset. Worst still - when the music starts playing through the speaker after a call, everyone starts to look at you like you are some moron.
I do really hope there is a way to resolve the problem. Any new fixes i can try???
Senior members? Any help?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
I have this exact same problem on my Sony Ericsson HBH-DS220.
The bluetooth will disconnect after hanging up a phone call. I don't press anything on the headset, I wait for the other person to hang up. When it hangs up, it immediately disconnects the bluetooth headset.
Annoying!
Probably a problem with the bluetooth stack then. The stack is already known to be very buggy and have problems with lots of Bluetooth devices. Luckily, unlike the graphics card, it looks like HTC will be releasing a fixed Bluetooth stack at some point in the future. In the mean time, you are probably out of luck.
Bluetooth connection problem also with Tilt
I have a Plantronics 510 BT earpiece that for no discernible reason is connected one minute and gone the next too. I haven't been able to determine any combination of actions, such as ending a call as the culprit. I always have to make the connection manually between the earpiece and the Tilt also - it never links automatically when I turn the earpiece on like it did with my Treo 650. I've had this Tilt for 3 days and this is probably going to be a show stopper and make me return it to at&t before the eval period in spite of everything else good about the phone. I also have a Plantronics Pulsar 590 stereo headset that I haven't experimented enough with yet to know if the connection is as flaky. But the bottom line is - I'll be damned if I'm going to try to fiddle with establishing a connection and all the steps it can take while I'm driving down the road!
HTC CLUB
I FOUND THIS FILE AT HTC CLUB... Dont know if it will fix your problem or not .. but its for some BLUETOOTH BUG ... This File is For TYTN2...
Description From HTC CLUB:
12/19/2007
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Hope This Helps
Good day,
I have done a bit of searching on this topic and have not found an answer to a rather surprising issue.
I just got my GNote and have paired it with my Voyager Pro+ AD2P BT headset.
Much to my surprise even though calls and VLingo are routed to my BT headset I come to discover that event notifications are sent to BOTH the GNote's speaker AND my BT headset (with a slight delay\echo as a result).
This to me is not how it should be. All my other phones would totally mute the speaker and redirect ALL sounds to the connected headset automatically, whether it was WM, iPhone, whatever.
In my searches I see others have had the same issues with Android phones.
Am I missing something here?
Is this happening to other GNote owners, be it wired headsets or with BT headsets?
Is there an App that corrects this issue?
Is this a basic Android OS oversight?
I am shocked and can only imagine that I will have to remember to put myphone into silent mode each time I want to use my BT headset and not have notificationscome over the built in speaker. I have yet to try this as I fear it will also silence the notifications sent to my BT headset.
Curious to hear from others on this matter.
Thanks,
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
I've recently purchased a lovely headset from XiaoMi for my Huawei P20Pro.
It's Mi ANC & Type C In-Ear Earphones. Model: JZEJ01JY.
It has lovely audio and works fine with most of the features except...
When I made calls, the headphone will not hear any sound at all. no dial tone, not even when someone picked up the phone on the other end.
I noticed a quick fix for this error is to turn on the handsfree mode when you made the call; after you hear the sound from the handsfree mode, turn off the hands-free, then the sound will start coming in through the headset.
Another option is to wait until you hear the dial tone then only plugged in the headset.
It is not quite ideal considering the hassle of having to do so.
The error was so niched that I could not find generic help online at the moment.
Anyone shares the same pain or could provide some help here? Thanks!
Sounds like a compatibility issue. Use the stock earphones and check of the problem also persists.
Same problem with stock headset
Hi, same issue with the original headset that came with the P20 phone. Same clumsy solution. Have you solved it?...