I am trying to Upgrade my X1's ROM. But I cannot upgrade because of the following problem:
ERROR [260]: CONNECTION
The update utility cannot connect to your PDA phone....
Check the following:
1. The PDA phone is connected to USB cradle/cable.
2. The USB cradle/cable is connected to PC.
I do not know why that error occurs. I connect PDA correctly to PC.
I can upgrade last time but not now.
Check USB-PC and see if it's on Activesync mode rather than reading it as a disk drive.
i check it and it is OK.
kenosis said:
i check it and it is OK.
Click to expand...
Click to collapse
try to change USB slot or PC, in my case i've got 3 USB ports, i changed and it works
Thanks a lot BartekBartek. i change to new USB port and it works now. wow wow
Thanks a lot
Thanks ! Worked like a charm
Related
Hi guys, i have probably killed my beloved kaiser.
This is what i did:
- Flashed latest Hyperdragon III Rom - all worked fine here
- Sometime later i figured out that the phone was not able to connect to my PC anymore (tried different computer and cable, no change: unknown usb device)
- I then entered boot loader and tried to flash an older rom (Garmin DK 3) but it stopped at 16% and i had to enter boot loader again.
The result:
Now no pc is detecting the tytn 2 correctly (unkown usb device) on boot loader screen. I guess that the usb port on the phone is somehow damaged. Any suggestions ?
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader
there u go
I just want to say that your phone not connecting was a simple thing.
Moved to apropos section.
tabaz said:
- Sometime later i figured out that the phone was not able to connect to my PC anymore (tried different computer and cable, no change: unknown usb device)
Click to expand...
Click to collapse
Did you try deleting your sync settings?
Delete device from sync list.
unplug/replug usb. setup device again.
Or I have also had to un & re install Active-sync.
Hope this helps
nonono .. its not that active sync is not working anymore, its that windows detects the device either as unknown device (on bootloader screen!) or does not detect it at all. I even cant select USB in mtty.exe - active sync disabled. Iam pretty much sure its an usb port issue since my tytn2 have had always problem with usb cons (did not recharge and stuff). Before that issue my pc had detected the tytn2 in bootloader screen.
tabaz said:
nonono .. its not that active sync is not working anymore, its that windows detects the device either as unknown device (on bootloader screen!) or does not detect it at all. I even cant select USB in mtty.exe - active sync disabled. Iam pretty much sure its an usb port issue since my tytn2 have had always problem with usb cons (did not recharge and stuff). Before that issue my pc had detected the tytn2 in bootloader screen.
Click to expand...
Click to collapse
Try another USB cable. I have a faulty cable at work and my phone disconnects from AS all the time. At home, no problems
Dave
i have tried several usb cable on several computer - same problem.
tabaz said:
i have tried several usb cable on several computer - same problem.
Click to expand...
Click to collapse
Oh well, it worth a shot.
Dave
Hi guys,
I have a real nasty problem here. Whenever i want to connect my SGS in download mode to reflash i get the error "usb device not recognized". When i just connect it as storage i get "this device can perform faster". I habe MIUI 1.12.9 on it, and I really want to flash something else. It stopped working since I accidentally connected my front USB's in the IEEE 1394 slot, instead of the USB one. Since then my external HDD won't work anymore, I had to open it and to use it as an internal one. Is there anything I could do? Or is smth f...ed up with my phone usb...
Any help would be appreciated. Thanks!
got it working on your pc in download mode before?
Try to reinstall the newest Samsung drivers.
sahara101 said:
Hi guys,
I have a real nasty problem here. Whenever i want to connect my SGS in download mode to reflash i get the error "usb device not recognized". When i just connect it as storage i get "this device can perform faster". I habe MIUI 1.12.9 on it, and I really want to flash something else. It stopped working since I accidentally connected my front USB's in the IEEE 1394 slot, instead of the USB one. Since then my external HDD won't work anymore, I had to open it and to use it as an internal one. Is there anything I could do? Or is smth f...ed up with my phone usb...
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
Once or twice when I get this message I just take out the USB from my laptop and connect it again.. if you are constantly getting this message I think something's wrong with USB.. I would suggest trying to connect on some other computer .. if that also doesn't work then try using a different USB cable..
I already tried on a different PC. Also with another USB cable but a Nokia one. Is it necessary to use a Samsung one?
sahara101 said:
I already tried on a different PC. Also with another USB cable but a Nokia one. Is it necessary to use a Samsung one?
Click to expand...
Click to collapse
No not really.. I have used a nokia cable many times and it has worked fine for me both in download mode and usb storage mode..
if you connect your phone in usb storage mode to a different computer, still the same message is flashed?
Actually on another computer I didn`t manage to connect at all, download mode or mass storage. Everything worked just fine before the USB thing.
Sent from my GT-I9000 using Tapatalk
You can:
1. use a different USB port
2. use a different pc
3. use a program to go to download mode ( POT android tools by opda team).
on different pc - install those USB drivers ->
http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
sahara101 said:
Actually on another computer I didn`t manage to connect at all, download mode or mass storage. Everything worked just fine before the USB thing.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
on a different pc you first need to install the drivers for your phone..
Download and install Kies.
POT Android can't find my phone. I'll try again on a different PC...
Hi to everybody!
I got used i9000M (Canadian) for my daughter (I have LG 3D so not really newbie to Android). It's in factory default state with 2.2 Android.
I tried to update system using Kies but have problem connecting my phone to PC. If I just boot phone up my Win 7 can see it (but not kies). I enable USB debug and Kies says something like "mode is not compatable". Should I untick USB debug and enabler KIES mode under Wireless?
But once I unplug it and plug back I get error 43:
Windows has stopped this device because it has reported problems. (Code 43)
I read and read and read... I'm ready to try odin but I don't know what exact ROM fits my SG... Also lots of stuff is connected to megaupload...
Thanks for any links in advance!
There is an option on Kies to reinstall drivers. I would suggest trying that. But above all, I would advise on rooting the phone and installing a custom ICS rom, like SlimICS. It will add tons of features and make your phone faster while conserving battery life. If you want to transfer files, just plug your phone in, and enable USB Mass Storage mode and you can just drag and drop files like you do with normal flash drives.
Goldenmeadow said:
But once I unplug it and plug back I get error 43: !
Click to expand...
Click to collapse
If you want to fix code 43, you should try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
IF you want to upgrade it by Odin , the Latest Gingerbread ROMS are here http://forum.xda-developers.com/showthread.php?t=1102881 ,choose the one for your region, all other resources that you may need can also be found at the My Android Collection link below
xsenman said:
If you want to fix code 43, you should try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thanks for reply! But here is the strange thing :
If I set USB debugging mode on the phone, my PC sees it with no problem and I see two devices in Device Manager under Portable (and they are identified as Samsung ...) But in this mode Kies doesn't connect - I get message like "unable to connect, switch phone to Kies mode ".
But once I turn debugging off, turn Kies mode on and connect the phone, my PC sees only one device and it's in USB group (in Device Manager). And now I get error 43...
So I think it's not the physical connector (otherwise I would not be able to connect at all) but rather old system - 2.2
I'll try to update it with Odin and let you guys know the result.
Sent from my LG-P925g using xda app-developers app
Goldenmeadow said:
Thanks for reply! But here is the strange thing :
If I set USB debugging mode on the phone, my PC sees it with no problem and I see two devices in Device Manager under Portable (and they are identified as Samsung ...) But in this mode Kies doesn't connect - I get message like "unable to connect, switch phone to Kies mode ".
But once I turn debugging off, turn Kies mode on and connect the phone, my PC sees only one device and it's in USB group (in Device Manager). And now I get error 43...
So I think it's not the physical connector (otherwise I would not be able to connect at all) but rather old system - 2.2
I'll try to update it with Odin and let you guys know the result.
Sent from my LG-P925g using xda app-developers app
Click to expand...
Click to collapse
You should instal SAMSUNG USB Drivers for Mobile Phones from here
Also try different usb port or computer. Make sure to kill all Kies processes when you using Odin.
Thanks for help - still no luck
Guys, thanks for help! I really appreciate it!
I installed SlimICS - phone running nice. But my both computers (XP and Win7) give me errors...
Funny part is - Odin works perfectly and I can see my phone in Device Manager with no problem!
Anyway, it's not REALLY big problem, rather inconvenience.
I don't know if it matters, but I also noticed that my AC charger for LG doesn't charge i9000. Weird? Do they have different pinout?
Thanks again.
It's me again
Just for fun connected the phone to old Toshiba laptop at work with win XP, without installing any Samsung drivers and ... And Toshiba recognized phone and showed me two drives - internal and SD!!!
My home computers still giving me grief... Both systems (xp and wib7) stubbornly don't want to install drivers! They put some Microsoft driver from 2007...
I'll keep fighting (installed Kies several times, just drivers - couple versions...)
Sent from my LG-P925g using xda app-developers app
Hello everyone,
Here the problem, I just acquired a Galaxy note and I can not connect to my Windows 8 PC (or windows 7) . Whether with or without kies.
In the device manager I have "unknown device"
I also tried odin mode and recovery of origin, but no way to install the drivers.
The galaxy shows in the bar notif "mtp connected" ( the smartphone is charging)
It is version 2.3.6. stock not root with kernel: [email protected]#2
did someone have an idea?
thank you in advance for your help.
Sorry for my english, i'm french.
U can set it in Settings > USB
But since u are using GingerBread, ur device might not be able to detect the usb port as more than charging port. This is very unlikely but it can happen..
And do Enable USB Debugging..
i have tried but it doesn't work too
uninstall kies and drivers reboot the pc. then download
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
and install it without the phone connected. connect the phone and see what happens.. when you connect the phone, there will be notification of drivers being installed in the system tray of pc. click on it and you will see what is installed and what is failing.
Change ur usb cable to another usb port. This happened to me last time when I tried to flash new rom via odin. Everything is fine but the odin didn't detected it. b4 do that remember to install ur GN driver.
Sent from my GT-N7000 using xda app-developers app
i have tried to reinstall drivers but always the same problem "windows can't install the device...)
i have tried use 3 diferents usb cable too... no result
I would like change the rom (to see if it was the probleme) but it's impossible without root. And the phone don't propose upgrade OTA...
There could be a problem with the usb port itself. You could try to clean it and test again.
i have do this but no result...
tony_the_unik said:
i have do this but no result...
Click to expand...
Click to collapse
Then it could be your mini USB cable. Try another cable.
Edit: Sorry, accidentally misread something. You tried 3 usb cables. My bad.
Click to expand...
Click to collapse
using ....XT1068
Hey guys im a newbie but pls help me
I am unable to connect any usb device and also not able to connect to pc
When i connect my device to my pc it does not detects my phone (tried on different pcs as well) and also the usb otg devices are also not working
I tried downgrading to kitkat but still no help....and even contacted customer support but they didnt helped
( my mobile is getting detected in AP fastboot mode without any problem....i flashed kitkat using it..) PLs help
Do you have Motorola Device Manager Installed?
If not then Download Here: Click Here
Yes it is installed properly
Ok.
First check this : First open Settings then navigate to Storage and touch the upper-right corner for the USB computer connection options. Make sure Media device (MTP) is selected.
If this doesn't work then well you need to update the driver for your phone which your computer is using. Go to device mangaer on your pc and click on your phone name and update all drivers(left click to see options).
Still not working
It worked for half hour and then gone again