Thanks a lot for your great job we really appreciate all your works;
is there a way to flash hardspl and rooms under vista ?;
its a little bit easier than flashing trough sdcard so it will be very kind of you if you show me a way to do this under vista;
thanks a lot bro
Same as XP, I have a vista machine and I have flashed mine many times without problem.
I had some issue with Vista while HSPL. Tried with XP Pro, it works without a hitch.
ROM flashing from storage card is easier too.
I could have save hours (reading up and testing)
Flashing using Vista should be almost the same as using XP. You could run the process with elevated user rights to be on the safe side (not sure right now, if that is even neccessary), but apart from that, it should work without a hitch.
Maybe I should correct my response. I flashed HSPL with XP, never tried it with Vista as it is usually a one time flash. I have since flashed many time the ROM's with vista.
There seems to be an issue with USB and vista and USPL, i only get error messages. under xp its 100% fine every time.
I flashed HSPL with Vista without any problems.
thanks a lot bro for your quick answers its very kind of you
anyway can i flash the hard spl from sdcard with same way of flashing rom from sd card ? and how to do this safetly ?
Many many thanks brothers
htc touch hd user
I had absolutely no problem flashing HSPL with Vista (32 and 64)
There is also an WMDC update for vista that's recommended to install if you havn't already which might help if you're having problems still
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
i'm using win7 x64 and i'm flashing without any problems ^^
and i've installed the same WMDC, so i suppose it works on fine on vista too
I have a Macbook Pro and never have any problem flashing under Bootcamp Vista Ultimate. HTH.
Related
Hi, i've read the "How to" from this URL http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66 but with no success.
Device Manager shows an error code 39.
I just don't understand, i followed everything without errors from the start.
what can i do now ? i want to reflash my radio rom from 1.50.08.11 to 1.46.30.11. My battery was draining slower with that one.
Thanks !
first of all, it helps if you post this under the thread for trinityguides...
you had your device in bootloader and connected before step 2?
are you vista 32 or 64?
it's quite strange cause most people had success with these steps. How have you flashed your ROM in the past?
same for me. the reason is that vista isnt able to install the drivers when the bootloader start.
vista 64bit only works with signed by ms driver be that videocard drivers or pda drivers
if you ask me 64bit is not yet for primetime
drivers are few and limited
support for many external things are non
funny to see how pc entuthieasts pay that much for
vista ultimate when the only thing they get is the 64bit option
and backup and some crypting options which if they ever use
they'll cry salty tears when they have to reinstall and cant
get access to their data anymore
ultimate dont mean it's faster or better
just that one gets the full ms bloatware packet
yeah... the guide shows how to load the unsigned drivers though...
are the two of you running 64 or 32bit vista?
his title "Unable to flash under vista x64"
the x64 would sugest that he's using the 64bit version
mmm... you are observant haha... can't believe i missed it
Same problem here, did what was written in the trinityguide (twice now), but to no avail. Code260 (no connection)
Vista64
-EDIT-
Fortunately my laptop runs on vista32bit, update works like a charm on that one...
hmmm... this is getting strange...
so you followed the 64bit instructions for unsigned driver that are in the popup window? (on trinityguides)
racerx_ said:
hmmm... this is getting strange...
so you followed the 64bit instructions for unsigned driver that are in the popup window? (on trinityguides)
Click to expand...
Click to collapse
Yep, every step, including the unsigned driver stuff (have used that for other programs too, it worked before). Did it twice, no error messages apart from the error260 while trying to update the device.
There must be people who do manage to get it to work, but not me (on the 64bit vista)
yeah, i'm really sorry to hear that. Most people have been successful. Every once in a while, someone reports that they have had trouble with it, but i don't have vista x64 to troubleshoot.
i remember reading in another forum about someone with the same error saying that some kind of optimization option he had selected for vista was the culprit. I think he ended up reinstalling vista with default options and was ok..
(i know that's not really the answer you're looking for, but just thought i'd throw it in there )
hey i was just thinking...
do you want to see if any of these other methods of disabling driver signing work for you, listed in this post
it works under vista x64
If you enable automatic update in vista x64, and you plug in your trinity, after a few minutes a update will appear from microsoft asking that there is a update for your trinity, install it and my phone works and was able to flash new roms on it with this update....i have windows vista ultimate x64 edition...
great tip... the_stranger or simkard, can you try this and verify if it works? i'm sure a lot of vista x64 users would be thankful to know
forgot somthing
if you have updated the drivers from microsoft, put your trinity in bootloader and then in "device management" select your trinity and select update drivers...if not your not able to flash.....
racerx_ said:
great tip... the_stranger or simkard, can you try this and verify if it works? i'm sure a lot of vista x64 users would be thankful to know
Click to expand...
Click to collapse
I've allready flashed under vista32bit and more importantly, installed all programs and contacts. However, when I update the ROM again, I will try this method and report back...
The_Stranger said:
Yep, every step, including the unsigned driver stuff (have used that for other programs too, it worked before). Did it twice, no error messages apart from the error260 while trying to update the device.
There must be people who do manage to get it to work, but not me (on the 64bit vista)
Click to expand...
Click to collapse
ive got vista 32 and i doesnt work 4 me. ive only gotten 1 rom 2 load 4 me. i need a new radio rom and it wont load.ive got the no gsm. wanna fix it bad.
I cannot get any thing to work with Windows Vista. I never had problems with XP and my other Wizard. I had it replaced through the insurance. Please help me. I have been through the threads claiming to have some way of tricking Vista with old drivers. I have installed them and had no change. Read all the threads!!
So Dont do it!!!
Man some versions work some doesnt... TRY XP men if you dont have problems since your first Wizard and xp use.
Dont be in panic mode, is not prooved even if many thread said that.
I'm just pissed, i had a great ROM running on my old phone. now i am stuck with a computer running Vista Ultimate and Mobile 5 on he replacement phone. I was hoping somebody found a way to run these Roms through Vista successfully.
Vista support for Windows Mobile is really hit and miss, it works for some, and not at all for others....your best bet is finding a friend with XP and upgrading it there.
Not G4 specific, moved > Upgrading
i use vmware with an xp image to mod my phone, i run vista x64.
Upgrade vista with all available service packs then download the latest version of WMDC from microsoft
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download
and try flashing then
If you still have problems try replacing the ruuupgrade files with Muns ones and use these to flash http://forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
if that doesnt work then you havent done what i just said
scousemartin said:
Upgrade vista with all available service packs then download the latest version of WMDC from microsoft
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download
and try flashing then
If you still have problems try replacing the ruuupgrade files with Muns ones and use these to flash http://forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
if that doesnt work then you havent done what i just said
Click to expand...
Click to collapse
I cannot flash my Wizard now that I have Vista 64-bit. I have followed many different methods that I have found on XDA in the last few days. I've downloaded and ran many different RUU tools, nothing gets me past the RUU crashing.
The one problem that I get hung up on is while installing a new driver for the Pocket PC (wceusbshx64.inf) in device manager I get the error message that the driver is not signed, I click next anyways. I then get the following message "The driver may be corrupt or missing (Code 39)".
Any other ideas? I'm having flashing withdrawals.............
Thank you for your help
Anyone that knows away to get around the above problems? Luckily I still have my XP computer upstairs, so I can still flash new roms. But I would like to keep it all on one computer (Vista)
Thanks
Some day...
I saw a guy with a XP emulator and a partition HD with Vista mostly and a little part with XP Pro ( he use the Vista for work and everything and the little partition just for upgrades but... He use an emulator for vista and he has XP Runing trought Vista... but I cant find the thread again...
+ Que PPC said:
I saw a guy with a XP emulator and a partition HD with Vista mostly and a little part with XP Pro ( he use the Vista for work and everything and the little partition just for upgrades but... He use an emulator for vista and he has XP Runing trought Vista... but I cant find the thread again...
Click to expand...
Click to collapse
Thanks, I remember seeing that thread before. I'll have to find XP and give it a try. The XP disk I have is for another computer so I'm not sure it will work.
Thanks
Hi all i was just wondering i have a Laptop with XP on it that i use just for Flashing because i used to have a HTC Prophet and you could only use XP to Flash a Rom.
I also have a Lappy with Vista on it and i was wondering if it is safe to Flash with the Vista Lappy or is it better to stick with XP.
What problems if any there has been Flashing with Vista thanks
lufc said:
Hi all i was just wondering i have a Laptop with XP on it that i use just for Flashing because i used to have a HTC Prophet and you could only use XP to Flash a Rom.
I also have a Lappy with Vista on it and i was wondering if it is safe to Flash with the Vista Lappy or is it better to stick with XP.
What problems if any there has been Flashing with Vista thanks
Click to expand...
Click to collapse
You can flash well in both XP and Vista, the method changes a bit but it can be done
Hell you can flash with neither, just get an SD card and do whatcha wanna do.
VISTA....Em, XP...
i already ask mods a couple of day before. but i never try it yet. here you go
http://forum.xda-developers.com/showthread.php?t=431422
and
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
I think XP is far better than vista, but i owned both i like Vista style but im flashing using my XP. so hope its help.
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
I would like to think there would be no problem you'll use the same WMDC as vista, but if you not sure flash the rom from the sd card, just rename it to blacimg.nbh (.nhb whatever? lol) and copy it to the SD main directory, once you enter bootloader follow the on screen instructions and it will flash the rom, I prefer this as it is faster then using the pc
Windows 7 is working excellent
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
Hello,
I have a Windows 7 latest build working. Just install WDMC (same version as vista mentioned above!)
It's working without any modifications and even much more stable then vista. It uses also less memory then Vista.
It is a very good choice apart from Windows XP -> Vista is the Beta version of Windows 7!!! ;-)
Many Thanks
Roman
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
I had nearly every build of windows 7 started with 6801 over beta 1 (7000) up to 7068 now and it worked on every version 32bit and 64bit! Just use the mobile device center ;-)
I've had no problems with win 7 synched to my Touch phone
No Problems with Win 7 no need to install anything to contact phone just use the mobile device center.
Ditto, works perfectly. You'll find Windows 7 installs some drivers the first time you connect your phone which may mean your flash times out while it waits. Just let the drivers install and the re-run the RUU and it'll start to flash
Running Windows 7 RC1 (7068) and no issues whatsoever
i couldnt HardSPL on windows 7 but other than that it works great with the HD.
I was trying to use USPL and that doesn't work (get USB in bootloader but the exe fails as can't find the usb port), guess I could try HardSPL but liked the idea of USPL. can you run USPL from the memory card?
did you change the usb drivers to the old ones? and turn off usb in active sync (on the pc)
I've done it on Windows 7 like the other users with no issues.
mkent_barbados said:
Has anyone got this to work? No one mentions Win7 in the thread about replacing drivers to get Vista to work and don't want to mess up my ActiveSync (which works) if I have another choice? Any advice would be great!
P.S. I don't have a XP machine available, converted both to Win7 beta.
Click to expand...
Click to collapse
i am using win 7 RC, no issue with any thing~ flash, sync, charge, share internet.
mkent_barbados said:
I was trying to use USPL and that doesn't work (get USB in bootloader but the exe fails as can't find the usb port), guess I could try HardSPL but liked the idea of USPL. can you run USPL from the memory card?
Click to expand...
Click to collapse
Install Vmware Workstation 6.5 and then create a new windows XP virtual machine.
Map you usb to the VM whenever you want to flash using USPL and not only. It works perfect!
ok thanks guys, sounds like using the old drivers will work, but Vmware sounds like a perfect solution will try that.
Ca5c4d3 said:
Running Windows 7 RC1 (7068) and no issues whatsoever
Click to expand...
Click to collapse
If you don't mind may I ask where you get the download for RC1 7068? I tried through MS site and got a license key but no download link, it said download was no longer available. Would like to try it.
works fine on build 7048
hanlence said:
i am using win 7 RC, no issue with any thing~ flash, sync, charge, share internet.
Click to expand...
Click to collapse
This is funny.... I would love to know how you have RC1 when its not even been produced yet / hit testing stages of RC
To clear up some comments on Windows RC1. The leaked version of Windows 7 build 7068 in the license agreement says Release Candidate so people are thinking its RC1.
No biggie.
For those who want to upgrade from a previous version of Windows 7 Beta to Build 7068 understand that it WILL break your Windows Mobile Center 6.1 - when it tells you that its not compatible with the 6.1 version in the upgrade it means it. Don't mess with it. Install a fresh copy or you will not get it to work. Even if you download the 6.1 version to re-install.
For those who are installing the HTC for the first time it will say that it cannot find it. That's okay. Once it cannot find it - refresh your windows update and it will find a new driver. once that is installed it will try to install a another driver and it can't find that one. Refresh Update again and it will then find the final driver and Windows Mobile Center will recognize the Touch HD.
Guys, I have ActiveSync working (I am on Win7 7000 however) but was trying to flash (and yes, I had 'unticked' allow USB). This is what was failing. Can't find an XP disc so will try the older drivers as per the solution for Vista. Thanks for all the help.
search for VistaRUU on google for the older driver. It should work just fine under windows 7, I've used it to flash my friends' hermes.
I am running windows mobile device center on a Vista 64 bit laptop.
I have a t-mobile wing that I got second hand. The wing has OpenTouch V7.6 BP WWE.
Here is the problem,
I am trieing to flash the rom to the latest T-Mobile update. When the flash starts the activesync connection drops and it never gets to even 2% done.
I have also tried to flash to different Ver. of OpenTouch and same thing.
Is this a problem with the phone or yet another Vista Issue...........
ANYONE !!!!!!!!!!!
omg! we have the same problem dude i wanted to flash the latest t-mo wing rom but then activesny drops and never installation progress never reach 2%.... will sum1 pliz help? i think this is not a small issue here pliz some1 help
I flash from vista 64 all the time run flash as Administrator
i can flash HERALD.ASerg.Clean2.WM61E.WWE and also HERALD.ASerg.9.WM61E.WWE.6pp(which i am currently using) but i cant flash the t-mos really need help pliz
Solution for flashing from Vista 64bit and postin only once
I do have the solution for your issues (specially looking the amount of posts you have done since your incorporation to XDA-Dev's):
1) Go to the top of the page, near to your username
2) Look the third link in the brown menu bar, from the right (LogOut, QuickLinks, ...)
3) That's right: this one which says "Search". Click on it.
4) Write "Flashing from Vista" in the combo which appeared
5) Read the issues with Vista and specially with Vista 64 bit or even XP 64 bit
6) You'll have the solution, and you'll have found it by yourself. That's to be proud !
6b) In some cases, you'll find it's too hard to flash from Vista and you need XP or the use of SD card ;-p
thanks buddy but actually i am using xp32. so now?
is your phone Hard spl?
wingmanbill said:
I am running windows mobile device center on a Vista 64 bit laptop.
I have a t-mobile wing that I got second hand. The wing has OpenTouch V7.6 BP WWE.
Here is the problem,
I am trieing to flash the rom to the latest T-Mobile update. When the flash starts the activesync connection drops and it never gets to even 2% done.
I have also tried to flash to different Ver. of OpenTouch and same thing.
Is this a problem with the phone or yet another Vista Issue...........
ANYONE !!!!!!!!!!!
Click to expand...
Click to collapse
That's not Win XP 32bit...
On the other side, if you use Win XP 32 bit, did you hard-SPL ? Can you put all the data about your device ? (SPL, Radio, etc.) so that we can know what is happening ?
afn691 said:
That's not Win XP 32bit...
On the other side, if you use Win XP 32 bit, did you hard-SPL ? Can you put all the data about your device ? (SPL, Radio, etc.) so that we can know what is happening ?
Click to expand...
Click to collapse
I too had trouble flashing the default ROM on my Wing. The secret is actually to open up the official RUU application, then search your Temp folder for two NBH's, the RUU_signed.nbh, and the SPL.nbh. You need to then copy them into the RUU folder of Flash Center, run that as administrator, and make sure to flash without SD card. That's the way that I used to restore mine to stock from Hard-SPL.