Hi all.I am having some problem with the new lcd screen on my trinity.
After replacing the screen (and the touchpad) , the colours are not as good as with my old lcd.The black is not black , is some kind of brown/gold (!!!) and so on.
i 've done a search for some kind of colour calibration but i haven't found any.
Have anyone seen such a problem before?
Is this a defective screen ?
most probably a bad/defective screen.
are you sure the replacement you bought is brand new and original?
Related
How can i fix problem whith digitizer? Works left side only... numbers 147 and start buton...
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
Refresh
anybody?
Hi,
Did you try to search? The other day I found a thread about it.
If the digitizer is broken, basically you can either replace the whole screen incl. the digitizer or just replace the latter which is more "nasty" to do since it is glued to the lcd screen.
Both can be found e.g. at ebay, descriptions how to dis-assemble the phone and the digitzer are also available on the internet.
Good luck!
Hi,
On my MDA compact IV I have te recalibrate my screen often.
When I have calibrated the screen, it can be I have to recalibate it after 2 or 3 houres. If I dont calibrate it again I get problems, for example if I touch on a send button on the screen It tries to call someone because the call button is below the send button...even sometimes it doesnt even respond at all....
In this topic: http://forum.xda-developers.com/showthread.php?t=1001105 I saw there is a reg edit possible for the calibration of the screen, but its for another phone (touch HD). Does anyone know if there's a regedit for the mda compact to solve this weird problem? Or do I need to replace some parts of the phone?
Greetings.
Hi,
This also happened to me. I had to recalibrate it more and more often until the touchscreen died completely. I've bought the touchscreen and LCD together on ebay are replaced the screen. Beware - do not buy digitizer only, the digitizer and lcd are glued together, and one can not remove touch screen without breaking LCD.
Cheers
Tomek
Hi everyone.
Just got an HD7 today , and to celebreate this I decide to take my "old" HD2 to make a screen comparison. And what a surprise !
Screen turns yellow on the white, colors seems to be denatured
Yet the two screens appear to be a TFT-LCD screen.
Have you done a test like that ? what do you think about this ?
Hello pros,
I have searched this entire forum but no answer, hoping you could help me.
My z1 had some water damage, to make a long story short, here are my issues.
1. Lcd was shot. It was all black Screen.
2. Although screen was all black, i could feel it vibrate and has audible sounds.
3. Touch screen still works. I am able to make and accept calls with or without my smartwatch.
4. With a very bright led flashlight shined upon the screen i am able to see whats on the screen.
5. Bought a new lcd+digitizer with frame and replaced the original one. Followed exact process as youtube vids.
6. Screen now lights up BUT touch screen does NOT work anymore.ggrrrr!
7. Bought another lcd+digitizer with frame thinking i got a faulty one. Same issues. Lcd lights up but no touch feature .
Questions:
1. Is it possible that the flex cable connected to lcd+digitizer is broken? If so, replacing the cable will definitely fix my touch screen issues?
2. Is it possible that it could be a hardware issue? If so, how do i fix it or replace a specific part?
Any and all response is highly appreciated . Thanks
Good Day to All,
I have a problem with my Z3+ E6553, the problem is that there is no display on the phone. Couple of weeks ago the lcd just stopped working, the device does come on with the LED lights, vibration and the touch is reponsive with which you can here the touch sounds, haptic feedback and the Speech to text speaking. I thought the LCD screen went dead and so I bought a new LCD screen to replace it but after replacing the screen the problem still presist with no display(black screen). So currently I have no idea what is the cause or what to do next.
I opended the phone was just check some things out, and I had a look at the LCD flex cable and I found something strange that maybe one of the connector antenna prongs missing. But I'm not sure if thats just how it is or its maybe it got damaged. Have a look at the attached pictures below.
Can someone tell me if this issue is with the LCD motherboard flex cable, or another hardware issue maybe being the motherbaord?