Related
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
Hello again,
My phone vibrates when a call is connected. I know there is a program called pocketAlarm that enables this feature but I never installed it!
What is causing this?
(I like this feature but Im just curious as to how and where this feature was enabled)
Thanks in advance.
Do you have any other contact managers installed? I know inesoft Address Book can be configure to vibrate on connection. I didn't think it was an option in a default build of WM 6.
I do have Inesoft installed but I don't see an option anywhere in the program to enable or disable this feature. Am I missing something?
check this: Settings, Personal tab, sounds & notifications, notifications tab, connection disconnected.
Make sure vibrate at the bottom is not checked. If it is, whenever you dial a phone number the internet disconnect will cause the unit to vibrate. Same thing with connection established.
I checked there and the vibrate mode is not selected, yet it still vibrates when it connects to a call. I am just wondering what software or option is causing it to do this.
The feature is hidden and can only be accessed if you enable Options "Show Tray Icon". Then go to the WM's default Today screen, tap the tray icon and the setting is there under options. I think it is silly to hide it there as people who disable the tray icon will not find this feature.
radium02 said:
I checked there and the vibrate mode is not selected, yet it still vibrates when it connects to a call. I am just wondering what software or option is causing it to do this.
Click to expand...
Click to collapse
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Your connected call shouldn't vibrate anymore - well it worked for me anyway!
Cheers
Zippyioa
zippyioa said:
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
This is not available on my stock AT&T (bloatware removed) 6.1 ROM. There is no "Advanced" tab. I would like to enable this feature. I've tried installing a CAB to do this, but no luck.
[size=-2]Posted with ForumPilot Freeware v1.1[/size]
jpcrailjr said:
This is not available on my stock AT&T (bloatware removed) 6.1 ROM. There is no "Advanced" tab. I would like to enable this feature. I've tried installing a CAB to do this, but no luck.
[size=-2]Posted with ForumPilot Freeware v1.1[/size]
Click to expand...
Click to collapse
same with stock HTC wm6.1
I am currently using this ROM:
http://forum.xda-developers.com/showthread.php?t=435724
Its quick and stable - I can thouroughly recommend it!
I am not sure where you can change the vibrate on call connect setting on a different ROM. Perhaps its worth searching the registry for the word vibrate?
If I find anything I will post to let you know.
Zippyioa
try this solution guys
http://forum.xda-developers.com/showthread.php?t=550553&page=16
the problem is when i have some application opened in my kaiser and the system goes to sleep, while waking it up it shows the today's screen and not the application which was opened earlier. Though the application keeps running in the background. How can i make it to wake up with the applications opened and not in the background?
Start>Settings>Today>Elements>uncheck "Show Today Screen After"
Rough translation from German device, but should get you there...
michi123 said:
Start>Settings>Today>Elements>uncheck "Show Today Screen After"
Rough translation from German device, but should get you there...
Click to expand...
Click to collapse
thanks for the tip but i was not able to see the Element->uncheck "Show Today Screen After"
Items>Today Screen Timeout.
gandotratushar said:
the problem is when i have some application opened in my kaiser and the system goes to sleep, while waking it up it shows the today's screen and not the application which was opened earlier. Though the application keeps running in the background. How can i make it to wake up with the applications opened and not in the background?
Click to expand...
Click to collapse
a bug in some wm6 roms make it do that if U use security code.
My HTC p3300 does after wm6 upgrade.
My kaiser using Duttys Wm6.1 19199 UC RTM does not.
this didnt help......is there a tweak in the registry to solve this problem ??
Burko said:
Items>Today Screen Timeout.
Click to expand...
Click to collapse
that should do it. set it to whatever amount of time you want to keep the applications "on top"...before switching back to the today screen....
if that didn't work...
Whos using gsen to sleep the Jewel and that automatically enable S2U2??
Gsen even works if you turn on the display to check time for example all on S2U2. (although some tweaking is required)
So its a great combo.
Very happy with diamond.
How do you do that please?
yes, details please !
Alright Fellasss:
Install Gsens!
Install S2U2.
In Gsnes CFG:
go down to #fdscreenoff(2)<----set it like that! File-->save.
exit.
S2U2 latest!! setup:
lock when backlight off --- ON
Everything OFFF all the way to the bottummm!!! OFF.
Reset JEWEL!!!
Remove S2U2 from Startup folder.
Run GSEN first.
Run S2U2.
ENJOY
Turn the diamond on its side and it turns offdisplay and activate S2U2 when yo press your onlock key S2u2 shows with slide unlcok..
If you only want to turn on the Diamond for a quick hour chek press any key and chek on S2u2 flip diamond and back to blank!
luck
What if I'm simply going to put it into my pocket instead of laying it down on the table? Then I won't flip the phone, so it'll never trigger S2U2.
Which version of S2U2 do you mean by latest? I have been using #fdscreenoff(2) with v1.05 and there were no problems at all, but from v1.10 it stopped working. GSen can't switch off the phone anymore. (it can, when you unlock S2U2 prior to flipping phone, but when phone is locked, Gsen #fdscreenoff(2) somehow crashes) With v1.05 you don't have to do any tricks, just set up S2U2 as normal, enable GSen #fdscreenoff(2) and everything works as it should.
Brevi said:
Which version of S2U2 do you mean by latest? I have been using #fdscreenoff(2) with v1.05 and there were no problems at all, but from v1.10 it stopped working. GSen can't switch off the phone anymore. (it can, when you unlock S2U2 prior to flipping phone, but when phone is locked, Gsen #fdscreenoff(2) somehow crashes) With v1.05 you don't have to do any tricks, just set up S2U2 as normal, enable GSen #fdscreenoff(2) and everything works as it should.
Click to expand...
Click to collapse
I have the exactly the same problem running S2U2 v1.13!
If I start by flipping the phone over it shuts off and pressing a button the phone is locked allright and I can slide to unlock it. I can repaet this and it still works.
But if I try to flip the phone over with the phone allready locked nothing happens, and when unlock the phone the "flip to off" dos not work at all!
Anyone any ideas?
aydc said:
What if I'm simply going to put it into my pocket instead of laying it down on the table? Then I won't flip the phone, so it'll never trigger S2U2.
Click to expand...
Click to collapse
YOu can quickly mimic laying down the phone on the table just in the air. You dont need to phisically lay it down.
Well, thats how g-forces work. But can you tell me what version you are using?
Brevi said:
Well, thats how g-forces work. But can you tell me what version you are using?
Click to expand...
Click to collapse
Version 1.13.
Working perfect. I did encounter some problems at the beginning, but, disable S2U2 on startup. And start gsen manually then start S2U2 with the settings I described before. A soft reset helps after changing #fdscreenoff(2)
I believe starting gsen first helps toooo
I have touch HD version 1.198310 WWE
Radio 1.09
I saw a youtube clip showing that no matter which application, the sensor is able to rotate to landscape mode. Especially useful when writing SMS and text, since the keyboard becomes larger (in landscape mode) and buttons are bigger. In my case the device, when rotated, does not move to landscape mode, except in these apps: youtube, opera and viewing pictures.
how to solve this issue?
Is there an updated ROM to fix it?
I wish my device goes into landscape when I rotate and when writing texts (SMS or word)
Thanks
allesim
gsen or gyrator 2.....
thanks a lot
are these applications? already loaded inside or downloable?
I cannot get any info from google search...
Thanks
Saluo
saulo866 said:
thanks a lot
are these applications? already loaded inside or downloable?
I cannot get any info from google search...
Thanks
Saluo
Click to expand...
Click to collapse
Here you are my friend
ohhh this is nice!!! thanks for sharing
Fallen Spartan said:
Here you are my friend
Click to expand...
Click to collapse
Hi, thanks for the cab. Unfortunately, I get a message telling me my .net compact framework is not new enough to run this (and Shapps Advance Config too) but when I attempt to download .net it tells me it's the latest.
Be grateful for advice here. Do I need to instal an older .net to run both these apps?
Many thanks
No you need .net CF 3.5
If you ever installed CF 3.5 before you can push it to your phone again with the application installer in Active Sync or Vista Mobile center
JanSchotsmans said:
No you need .net CF 3.5
If you ever installed CF 3.5 before you can push it to your phone again with the application installer in Active Sync or Vista Mobile center
Click to expand...
Click to collapse
Hi - many thanks for the reply...trying it now.
To clarify, CF 3.5 installs on your Windows PC and then pushes to your mobile.
If you look in:
C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE
You'll also find the cabs seperatly.
It works! Many thanks for the advice Jan.
Net Framework v3.5
For those looking, heres .net CF 3.5
ok now, i just tried gyrator 2 with .net CF 3.5 installed. i open up gyrator 2, the window turn to landscape in that application, when i go to other application and gyrator 2 is still running, the screen wont turn. i try to go back to gyrator 2 and hit minimize then launch other application, same thing.
any ideas?
i found gsen works. there is another program called rotate me, also works. i can make all program menus turn landscape, not today screen. anybody can solve this?
Screen will not rotate
I've tried gyrator and gsen and it will not auto rotate for me. My main objective is to get sms in landscape mode to make typing easier and quicker. Any other programs or reg edits I can possible use ?
ryche316 said:
I've tried gyrator and gsen and it will not auto rotate for me. My main objective is to get sms in landscape mode to make typing easier and quicker. Any other programs or reg edits I can possible use ?
Click to expand...
Click to collapse
Have you tried Change Screen? Just select the default rotation angles you prefer then hit save, EVERYTHING will rotate that way as well. If you don't want specific apps to rotate, you can manually specify the apps names and the angle its allowed to rotate to. If you don't know the name of the app, just turn the function 'show app name' then run the program and the name you need to use will be displayed. Really easy to use.
kieboy said:
Have you tried Change Screen? Just select the default rotation angles you prefer then hit save, EVERYTHING will rotate that way as well. If you don't want specific apps to rotate, you can manually specify the apps names and the angle its allowed to rotate to. If you don't know the name of the app, just turn the function 'show app name' then run the program and the name you need to use will be displayed. Really easy to use.
Click to expand...
Click to collapse
Thank you for the info. I tried the program that you suggested and it worked like a charm !!! thank you !!!!!
ryche316 said:
Thank you for the info. I tried the program that you suggested and it worked like a charm !!! thank you !!!!!
Click to expand...
Click to collapse
Glad to be of help.