Related
Hi, my htc hd starts with 'smart mobility R1.14.25.24
D1.59.48753' and goes to windows version 6.1 initial screen (preparing for first use), then restarts again. I checked the boot loader screen and it comes with
blac100 32m
spl -1.54.0000
microp-blackstone led v6.
I did try to do USPL v2.5, i get the message 'usb port can not be opened'.Would someone please help to get my phone working? Really appriciate any help.
Hi,
Maybe try to flash with other rom, using SD card.
valanxda said:
Hi, my htc hd starts with 'smart mobility R1.14.25.24
D1.59.48753' and goes to windows version 6.1 initial screen (preparing for first use), then restarts again. I checked the boot loader screen and it comes with
blac100 32m
spl -1.54.0000
microp-blackstone led v6.
I did try to do USPL v2.5, i get the message 'usb port can not be opened'.Would someone please help to get my phone working? Really appriciate any help.
Click to expand...
Click to collapse
Put your phone into its bootloader and try to run USPL.exe. Did you remember to disable antivirus?
Fallen Spartan said:
Put your phone into its bootloader and try to run USPL.exe. Did you remember to disable antivirus?
Click to expand...
Click to collapse
Thanks. I did disable the antivirus. still not working.
Yesterday I tried orange ROM 'OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software', hoping it would make the phone working. The update was successful, but the same problem.
valanxda said:
Thanks. I did disable the antivirus. still not working.
Yesterday I tried orange ROM 'OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software', hoping it would make the phone working. The update was successful, but the same problem.
Click to expand...
Click to collapse
Try to install a newer version of the HSPL.
If you can't get USPL to work, have you tried HSPL? Your using a rom based on 1.56+ so you'll need to use HSPL 1.56
I just tried HSPL. I followed the thread http://forum.xda-developers.com/showthread.php?t=505377. Flashing for dummies. When I run the first step 'HSPLWrapper_Blackstone_156OliNex', it sits on 0% for long time and finaly came up with error msg. I tried the option 'recovery', but no use. I have done a hard reset. Still same position where it started. . I'm very sad now..
valanxda said:
I just tried HSPL. I followed the thread http://forum.xda-developers.com/showthread.php?t=505377. Flashing for dummies. When I run the first step 'HSPLWrapper_Blackstone_156OliNex', it sits on 0% for long time and finaly came up with error msg. I tried the option 'recovery', but no use. I have done a hard reset. Still same position where it started. . I'm very sad now..
Click to expand...
Click to collapse
What error message do you get? There should be an error code eg 260 or 262 etc. The different errors have different meanings and different solutions to fix them.
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
valanxda said:
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
Click to expand...
Click to collapse
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
valanxda said:
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
Click to expand...
Click to collapse
Error 262 is a very common error.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
Try to reboot and try to rerun a few times. If this doesn't work you will need to run the manual sspl.
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* If bootloader now shows 1.56.olinex you can then flash to your new rom.
Click to expand...
Click to collapse
When you say you tried the manual solution is this what you meant. You may need to reflash to your stock (original) rom first and then run manual sspl from there.
As this is now becoming a flashing problem, please post further responses in the Dummies Guide thread and I'll help you there. This thread will probably be closed soon.
As per post above, please post in dummies guide thread
Thread closed
http://bit.ly/bQfvm6
Thanks Paul
Thanks Paul!
Doesn't work with the 1.31 ROM
Yeah it does...
P
iziy said:
http://bit.ly/bQfvm6
Thanks Paul
Click to expand...
Click to collapse
cheers paul
great the way you have taken the lead on Android
colonel said:
cheers paul
great the way you have taken the lead on Android
Click to expand...
Click to collapse
Anyone successfully rooted? For me dont work
anyone have done it?
unable to root with 1.31. Paul will be updating this tomorrow on how to do with with ver 1.31
http://android.modaco.com/content-page/307487/29-apr-r1-htc-legend-rooting-guide/page/60/#
Anyone rooted their legend that can tell med if the new rom comes with danish locale?
I've tryed to root my NoBrand Legend fw1.31 BL0.43 with No Succes!!
I did the step1 but I cannot enter in recovery mode from bootloader. It appairs a black warning screen and the pc does'nt found the device so I cannot start the step2!
Once I restarted the phone I've the previous setting but in software information I got a ROM no-sign.
Help me!
Pirreballo said:
I've tryed to root my NoBrand Legend fw1.31 BL0.43 with No Succes!!
I did the step1 but I cannot enter in recovery mode from bootloader. It appairs a black warning screen and the pc does'nt found the device so I cannot start the step2!
Once I restarted the phone I've the previous setting but in software information I got a ROM no-sign.
Help me!
Click to expand...
Click to collapse
Don't restart phone on red exclamation screen push power + VOL up button at the same time and u will enter on recovery menu
iziy said:
Don't restart phone on red exclamation screen push power + VOL up button at the same time and u will enter on recovery menu
Click to expand...
Click to collapse
Okay but than i cant instal the update zip. It gives an eror.
iziy said:
Don't restart phone on red exclamation screen push power + VOL up button at the same time and u will enter on recovery menu
Click to expand...
Click to collapse
Ok I did it! Now I've the blue recovery screen but in the bottom of the screen there is written in yellow:
E:Can't open /cache/recovery/command.
So I've the same problem that the PC doen't find the device when I lunch the step2!
Pirreballo said:
Ok I did it! Now I've the blue recovery screen but in the bottom of the screen there is written in yellow:
E:Can't open /cache/recovery/command.
So I've the same problem that the PC doen't find the device when I lunch the step2!
Click to expand...
Click to collapse
Is it branded or unbranded phone which ver of software u have?
iziy said:
Is it branded or unbranded phone which ver of software u have?
Click to expand...
Click to collapse
It's NOBRAND, fw 1.31, bootloader 0.43.
Finally I've root it!
Run all the processes from a lite version of Windows XP!
The difficult part was to configure the drivers of Legend for adb, fastboot and bootloader mode: http://www.mail-archive.com/[email protected]/msg90765.html
After that another possible variant for my success may have been the change of the microSD which I created the Goldcard.
So, from windows, step1 did not give me more the error 42 and was able to load all necessary files on the device, consequently, has also completed the step2!
P.S. single bug found ... greater instability in wifi!
Cannot root my Legend
I have the same problem at Step 2. I get Error: Device not Found when it tries to load files to the phone and to the SD card. And I have that warning symbol on the phone screen. Is there something that you have to do so the computer can find the phone? I have the drivers there. What else do you need to do? Has anybody figured it out?
Thanks for any advice.
Jeff
how long does the step1 take?
I am wondering how long the step1 may take. It is runing since a while...
thanks for any answer....
ferry99 said:
I have the same problem at Step 2. I get Error: Device not Found when it tries to load files to the phone and to the SD card. And I have that warning symbol on the phone screen. Is there something that you have to do so the computer can find the phone? I have the drivers there. What else do you need to do? Has anybody figured it out?
Thanks for any advice.
Jeff
Click to expand...
Click to collapse
Did you pass the step1 without problems?
If any error was encountered, step2 is likely to fail.
Have you checked your ROM/bootloader versions?
win7 x64
Ok. So with win7 x64 the step1 was never done.
I rooted with my mac, that worked fine.
hi, i have tried und open my bootloader with 1clicktool ... failed, later i tried to flash a new rom and now i have the boot screen KG logo and Security Error, Error !!! morningcall is empty
can someone pls help me ? thx
galdeano said:
hi, i have tried und open my bootloader with 1clicktool ... failed, later i tried to flash a new rom and now i have the boot screen KG logo and Security Error, Error !!! morningcall is empty
can someone pls help me ? thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2069723
Always use search before posting.:good:
sPEADy said:
http://forum.xda-developers.com/showthread.php?t=2069723
Always use search before posting.:good:
Click to expand...
Click to collapse
ok thx, i have seen this link before.
i am not able to get this S/W mode ... so i have no connection with phone and LG flash tool
Hi,
Im searching RUU for 64 bit.
Europe version... https://mega.co.nz/#!aNBDWITC!Zpb7D2ublCdR6YPm46hSgy6vtDWXwgvud1iDfOuFDc8
vwadam said:
Hi,
Im searching RUU for 64 bit.
Click to expand...
Click to collapse
jdmedeiros said:
Europe version... https://mega.co.nz/#!aNBDWITC!Zpb7D2ublCdR6YPm46hSgy6vtDWXwgvud1iDfOuFDc8
Click to expand...
Click to collapse
Thanks for link,I tried it,first time its load one thing,im click on Accept.... than windows is close and its all...i tried 3 times too and nothing..im wait 1 hour,but nothing..
Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48dKBYczMLGPBt1ld7YUiHdXQ0jG7nO-bt-IFn0 and rename it o 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
vwadam said:
Thanks for link,I tried it,first time its load one thing,im click on Accept.... than windows is close and its all...i tried 3 times too and nothing..im wait 1 hour,but nothing..
Click to expand...
Click to collapse
jdmedeiros said:
Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48dKBYczMLGPBt1ld7YUiHdXQ0jG7nO-bt-IFn0 and rename it o 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
Click to expand...
Click to collapse
Ok,thanks.
You mean restart Recovery or not?
No, I mean what I wrote. When you press the Power button from the Fastboot screen it will go to the HBOOT screen, look for a file named 0PCVIMG.zip and try to install it.
vwadam said:
Ok,thanks.
You mean restart Recovery or not?
Click to expand...
Click to collapse
jdmedeiros said:
No, I mean what I wrote. When you press the Power button from the Fastboot screen it will go to the HBOOT screen, look for a file named 0PCVIMG.zip and try to install it.
Click to expand...
Click to collapse
When i try to add this file to my phone its say its not connected (Im in sdcard folder in pc,but its say this)
If i want to add another file its working perfect,but with this zip no..you have any idea?
ADB and Fastboot dont work,i checked adb devices/fastboot devices and adb only say list of device attached but not tell device name,fastboot is say nothing..
Phone hang at htc logo screen
jdmedeiros said:
No, I mean what I wrote. When you press the Power button from the Fastboot screen it will go to the HBOOT screen, look for a file named 0PCVIMG.zip and try to install it.
Click to expand...
Click to collapse
Hi jdmedeiros,
I loaded this RUU (which is the correct ROM for my htc 510 bought in Singapore) to the micro sd card and it runs and then return error message "Device halted due to large image update fail. Press power to reboot."
I have rooted my 64 bit htc510 and some reason I may have deleted or uninstall the wrong apps, my phone is not able to reboot to factory default and always hang at the white screen with htc logo.
Anyone knows how to find this will be greatly appreciated.
Thanks.
Is your bootloader locked?
if (bootloader is not locked) {
1. reboot phone to bootloader (it will say fastboot usb under a red bar)
2. from the pc run "fastboot oem lock" (the phone will restart and come to the bootloader screen referred to in point 1.)
3. press the Power button; it will go into the HBOOT and if that is the right file for your phone than it should install.
4. let us know if it worked... we like to know
}
looloo510 said:
Hi jdmedeiros,
I loaded this RUU (which is the correct ROM for my htc 510 bought in Singapore) to the micro sd card and it runs and then return error message "Device halted due to large image update fail. Press power to reboot."
I have rooted my 64 bit htc510 and some reason I may have deleted or uninstall the wrong apps, my phone is not able to reboot to factory default and always hang at the white screen with htc logo.
Anyone knows how to find this will be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
jdmedeiros said:
Is your bootloader locked?
if (bootloader is not locked) {
1. reboot phone to bootloader (it will say fastboot usb under a red bar)
2. from the pc run "fastboot oem lock" (the phone will restart and come to the bootloader screen referred to in point 1.)
3. press the Power button; it will go into the HBOOT and if that is the right file for your phone than it should install.
4. let us know if it worked... we like to know
}
Click to expand...
Click to collapse
I am able to see fastboot usb. When I ran "fastboot oem lock", phone restarted but ended with the attached error message "status read failed. (too many links)". See attached file.
Now the top of the screen has 2 new lines :
"*** Relocked ***
*** security warning ***
Please help. I tried various method but still stuck with the boot screen or went into bootloaded screen but not able to install anything.
It works!!!
Made a stupid mistake : didn't insert the microsd card when I rebooted the phone in fastboot.
Took about 15 mins to complete the flash. Now back to the stock rom.
Will root the phone again later.
All this will not be possible without your generous help.
Very good! Now when the phone reboots and you are looking at those two lines *** Relocked *** *** security warning ***, meaning that you are in the bootloader screen, press the POWER button and it will go to the HBOOT menu and install your update, as long as the file is in the root of the sdcard and is called 0PCVIMG.zip
looloo510 said:
I am able to see fastboot usb. When I ran "fastboot oem lock", phone restarted but ended with the attached error message "status read failed. (too many links)". See attached file.
Now the top of the screen has 2 new lines :
"*** Relocked ***
*** security warning ***
Please help. I tried various method but still stuck with the boot screen or went into bootloaded screen but not able to install anything.
Click to expand...
Click to collapse
I cant paste this zip on sdcard. Its allways say Phone is not connected or phone not response..any idea for fix it?
Remove the sdcard from the phone and insert it directly into the computer (after you place in the carrier) and then copy the file to the sdcard.
vwadam said:
I cant paste this zip on sdcard. Its allways say Phone is not connected or phone not response..any idea for fix it?
Click to expand...
Click to collapse
jdmedeiros said:
Remove the sdcard from the phone and insert it directly into the computer (after you place in the carrier) and then copy the file to the sdcard.
Click to expand...
Click to collapse
I have added this zip to my 32gb sdcard and rename it to right name,but phone dont find it on hboot,i thin because my pbone is ubl,but i cant lock it because fastboot devices is no work,dont know whats the problem...im using w7 32 bit
Edit: Fixed adb and fastboot devices,going to try it now.
I got this error when phone tried to flash this zip:
"CID incorrect!
Update Fail!
Device halted due to Large Image update fail.
Press bower to reboot"
OK, it's the wrong file for your phone. That's what the message means.
vwadam said:
I have added this zip to my 32gb sdcard and rename it to right name,but phone dont find it on hboot,i thin because my pbone is ubl,but i cant lock it because fastboot devices is no work,dont know whats the problem...im using w7 32 bit
Edit: Fixed adb and fastboot devices,going to try it now.
I got this error when phone tried to flash this zip:
"CID incorrect!
Update Fail!
Device halted due to Large Image update fail.
Press bower to reboot"
Click to expand...
Click to collapse
jdmedeiros said:
OK, it's the wrong file for your phone. That's what the message means.
Click to expand...
Click to collapse
Now RUU too started,its on 3/8 atm,i hope its will fix the problem with phone.
Edit: All is work perfect after ruu,thanks for help.
jdmedeiros said:
Download this and rename it o 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
Click to expand...
Click to collapse
There's a problem with the zip - can you upload it again please? Tried downloading 7 times now, on different browsers and machines, always comes back as corrupt (checked out the contents of the zip with 7zip and the userdata8 img file is incomplete)
64 bit ruu
hi. i need a 64 bit ruu for my desire 510 .if you could help me i would apreciate it . and also i was wondering if "lightning kernel " will work on this device
LYNO23 said:
hi. i need a 64 bit ruu for my desire 510 .if you could help me i would apreciate it . and also i was wondering if "lightning kernel " will work on this device
Click to expand...
Click to collapse
This is from my dropbox and if you download it you need to extract it from the zip file first and it's meant to be used on a computer NOT a phone and if you don't know what you are doing with an RUU read and learn first please do not PM me asking how to use this because I won't answer any PM about this!
HTC Desire 510 64 BIT Europe version
---------- Post added at 09:38 PM ---------- Previous post was at 09:38 PM ----------
bobbytables22 said:
There's a problem with the zip - can you upload it again please? Tried downloading 7 times now, on different browsers and machines, always comes back as corrupt (checked out the contents of the zip with 7zip and the userdata8 img file is incomplete)
Click to expand...
Click to collapse
This is from my dropbox and if you download it you need to extract it from the zip file first and it's meant to be used on a computer NOT a phone and if you don't know what you are doing with an RUU read and learn first please do not PM me asking how to use this because I won't answer any PM about this!
HTC Desire 510 64 BIT Europe version
hello my redmin 4x was bricked :
- no start juste lead bump
- if i do vol up + power i have a pinguin (linux logo)
- access to fast boot
tel not unlocked ...
how to re install it ?
regards
Hi.
You should try miflash to restore stock rom.
If you still can enter fastboot, it should be ok.
newbie_or_not_newbie said:
Hi.
You should try miflash to restore stock rom.
If you still can enter fastboot, it should be ok.
Click to expand...
Click to collapse
hi
it says
error failed
remote : critical partition flashing is not allowed ...
maybe i need to unlock device but i don't find how to only in fast boot
nemicker said:
hi
it says
error failed
remote : critical partition flashing is not allowed ...
maybe i need to unlock device but i don't find how to only in fast boot
Click to expand...
Click to collapse
please some help ?
nemicker said:
please some help ?
Click to expand...
Click to collapse
please !!! no way ? my phone was dead ?
Same here, i might have to flash the custom ROM via EDL
Hello Can toi explain how to do this ? What is edl ?
Thanks Hope on road
https://forum.xda-developers.com/showpost.php?p=80966403&postcount=5
check this post (u have to open your phone)