Database Develop

Anyone get Logmein to work via Kaiser?

I'm getting to the connection page but then it goes back to the sign in.

Working great on my phone.

can you attach the ractrl.cab you used?

Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.

trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib

I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.

Your in luck mate, I found the file. But I cant find away to upload it here.

yeah, connecting to logmein and installing the cab directly from website works great!

Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.

I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.

When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.

avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...

After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...

After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm

On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me

Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG

TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.

If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.

Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.

jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.

A long shot, but someone may know! Problem with BBC program

Got a little bit of a bizzarre one, when i install BBC (Blackberry connect) to my kaiser (both BIS and BES) the device will function fine, but as soon as i use the email setup wizard it messes things up.
The email connection wizard is using internet explorer.
After i exit this, my internet explorer get confused and wont work!
I try viewing a web page and it pretends to look, but does nothing. i refresh it says complete but does nothing.
Yet ive installed opera mobile and mini, both work ok, getting a data connection at the same time as the blackberry is not an issue.
But i cant figure for the life of me why this email set up wizard has killed my explorer.
I could uninstall blackberry and start again, but my IT department wont be chuffed if i request my BES password again for the third time in a week!
If anyone knows of a way to make the internet explorer work again that would be great!

same issue
Got the same issue - think it might be an issue with the BBC software itself. I tried to view a company internal website - which I think tried to use the BB web browsing connection + hey preso IE doesnt' work anymore.
Exactly the same symptoms - IE pretends to look for a site but returns nothing. Marvellous - glad to hear Opera works - just downloading it now.
John.

I've got BBC (bis) and internet working fine on my Tytn II.
Do you have a seperate data contract for the internet. I think that the connection that bbc sets up is just for emails.
Mind you I only have a BIS account.
So my Blackberry connection is more or less permanently connected and my emails come through as and when. If I then load IE the phone will attempt to connect to my contract internet data connection (should wi-fi not be available) and surf the web.
This all works ok, check your settings for IE to see what connection its using for surfing.
Cheers

pocket internet explorer not working on tilt

I recently upgraded my at&t tilt to the htc WM6.1 from WM6.0. Also prior to that I changed the hard sspl to 3.28 as well. My current rom is 3.28.405.0. Internet explorer worked fine prior to upgrade and it also works when plugged in to my pc via the usb cable. Any comments are appreciated

In what way is it "not working"?
Ta
Dave

vmaka said:
I recently upgraded my at&t tilt to the htc WM6.1 from WM6.0. Also prior to that I changed the hard sspl to 3.28 as well. My current rom is 3.28.405.0. Internet explorer worked fine prior to upgrade and it also works when plugged in to my pc via the usb cable. Any comments are appreciated
Click to expand...
Click to collapse
So basically you cannot get PIE to work over GPRS/Edge/3G..right? If it works via activesync then I'd say that there's something wrong with your gprs/edge..etc. settings.

thank you for responding. Internet explorer works fine when active synced. 3g/gprs and even wifi do not work i get the lower bar which says "locating" and then after a few seconds "the page cannot be found. Check the name and try again." but he same page works when actve synced. any help is appreciated.

Don't use that browser? Go get Opera Mini or SkyFire.

my internet explorer is acting weird after the update as well.. it works basically but I just can't see what I'm typing, the letter are white to match the background for some odd reason.. anyway to change the font color?

XGhozt said:
Don't use that browser? Go get Opera Mini or SkyFire.
Click to expand...
Click to collapse
Yes use pie, it really is better than either of the browsers this knuckle head just mentioned.
Dampeal
I think thats the theme the phone is using.

Pocket IE 403

Hello all,
I just upgraded to Windows Mobile 6.1 on my ATT tilt. I ran Kaiser Tweak to enable the HSDPA, which is working great. I won't be charged by ATT for enabling HSDPA will I?
Anyways, my problem is that when I try to open Pocket IE and browse to a website I walways get a 403 error. I have tried running Disable Proxy.cab and Enable Proxy.cab but it is not working.
Any help is appreciated. Much thanks.

I can't answer your question sorry, but let me point you towards Opera 9.5 browser - much better than pocket IE, imho.

How are you "Connection Settings" set?
Use the HTC Auto Config CAB (install and soft reset)
After it ran go the the MediaNet connection and select:
- User server assigned IP address (under TCPIP and Servers)
- Proxy Settings check "The network connects to the internet" (first box) all others off.
You SHOULD get at least an Edge connection. I don't know how BUT without a SIM card with the "3G" logo I was never able to get a 3G connection but that's a different story.
Edit: Attached the HTC Connection Setup Auto CAB

I tried your method but I still haven't had luck.
I believe it is because I have an iPhone 3G data plan which doesn't have MEdia NET. Is there a work around for this? I only want Pocket IE because Opera Mini cannot download files.

dylanc430 said:
because Opera Mini cannot download files.
Click to expand...
Click to collapse
but the guy was suggesting you to get Opera 9.5, not Opera Mini.
Once you start using Opera, you'll forget PIE soon

dylanc430 said:
Hello all,
I just upgraded to Windows Mobile 6.1 on my ATT tilt. I ran Kaiser Tweak to enable the HSDPA, which is working great. I won't be charged by ATT for enabling HSDPA will I?
Anyways, my problem is that when I try to open Pocket IE and browse to a website I walways get a 403 error. I have tried running Disable Proxy.cab and Enable Proxy.cab but it is not working.
Any help is appreciated. Much thanks.
Click to expand...
Click to collapse
If you have not figured out the answer to this let me share my experience with this issue.
This is an annoying AT&T issue with your data. In 6.0 IE used to just show a blank screen when it happened, 6.1 now shows the 403 error. This happens for no known reason when the data decides to just crap out. It's very frustrating and happens a few times a week it seems.
If you have soft-reset your phone recently (turned all the way off) you've probably noticed that it's working again. Soft-resets fix this issue, but can be a hassle if you're in the middle of something. Fortunately there is a quicker way that was posted on a similar thread about the same issue.
When you get the 403 error, go into your Com Manager (where you can turn off wifi/data/phone etc...) Turn on Airplane mode, when completed, turn off Airplane mode. This will reset your data enough to fix the 403 error without soft-resetting.
Give this a try next time and see solves the problem.
Edit: Just noticed your post about having the iPhone data. Not sure if this is the issue or not, but if so my solution may not do anything for you.

myth.71 said:
but the guy was suggesting you to get Opera 9.5, not Opera Mini.
Once you start using Opera, you'll forget PIE soon
Click to expand...
Click to collapse
But for some reason, Opera is too cumbersome when trying to view information. You have to continue to ZOOM it so you can see. Then, also, it will not allow you to view certain data on web pages. I use Skyfire to view websites. I HATE the zooming feature on it as sell, but at least I know it'll pull up all information. Maybe it's Active X or something.

[HELP] Internet Connection Error : Internet Explorer & QuickGPS

Internet Explorer not connecting. It says "The address is not valid. Check the address and try again". Funny but the Opera works perfectly
QuickGPS also not downloading anymore. It says "Connection failed. Please try again later" I uses Quick Position and it download just fine.
Windows Live Messenger also cannot sign-in. It says Connectivity problem.
I already tried connecting via "Wifi", USB and GPRS.. all giving same issue..
Basically I have no problem on my internet but above few applications just not working
Need help on this please.. thanks in advance..

Try going into settings and re do the network setup. I had this problem the other day where the phone would not establish a data connection via the phone network. After re doing the initial network setup again it worked fine. Hope this helps

If you have Advanced Config installed, see under Internet Explorer settings.
The last one is for "Proxy Auto Detection". Try enabling/toggling it. Do a soft reset.
Does this work?

Techno-Freak said:
If you have Advanced Config installed, see under Internet Explorer settings.
The last one is for "Proxy Auto Detection". Try enabling/toggling it. Do a soft reset.
Does this work?
Click to expand...
Click to collapse
tried enable / disabled.. doesn't work.. when disabled.. no error pop-up but doesn't return the page.. when enable back.. the error msg came back..
sigh!!

Weather problem back to normal.. the rest of the internet problem still persist...

funny situation happens..
Messenger back to normal.. only problem now is with my IE and QuickGPS
Funny with QuickGPS is when I connected via Active sync.. it will auto download fine.. but if I were to click on the download button, it will return error.. weird..
IE still gives me same problem on the error address..
rest of the internet application works fine..

TF3D Panel Pictures in English
Can someone please post or tell me where to find the picture panels in English. Would also love to know how to create my own Panel Pictures
Thank you
MTWIZARD