Installed TF3d and standby .cab, still can't get power right - Tilt, TyTN II, MDA Vario III Themes and Apps

Hey guys, I just flashed the latest -G- ROM and then put tf3d on it. I made sure to install the touch power and standby .cab's as well. My after about one or two minutes being idle keeps turning the screen on and off and there is no way to make the problem stop other than doing a soft reset with the stylus. Is there a way to fix this problem?
Also I tryed plyaing with touch power but I don't seem to fully understand this program. I hit the power button and it shuts down tf3d as expected but when I hit reload tf3d 90% of the time nothing happens. Is there a way to jus make the power button work as it did before (when u lightly pressed the power button the screen turned off, long press it shut down the phone).
Thank you guys for your help, I searched and I'm sorry if this question has already been answered before.

If you actually read the included README then you would have seen this
README said:
(Note:You MUST disable TF3D on the today screen and allowing the device to go into sleep after a set amount of
time. Go to Settings/System/Power.)
Click to expand...
Click to collapse

readings hard, i from ky it's crazy how many NEW THREADS get started to ask A PERSONAL QUESTION instead of asking in the THREAD WHERE YOU GOT THE ROM!!!

no actually he asked in that thread and he also made this thread

Im sorry for the not reading the read me file, in my standby cab zip package there wasnt a read me and neither was there one for the touch power package. I tried following your advice but my kaiser doesn't seem to want to go to sleep automatically even when I have adjusted the settings to do so. I even uninstalled touch power and standby and it still won't automatically shut off the back light and sleep. Do you or anyone else know what else I can possibly do other than a hard reset?

streetrideF1 said:
Im sorry for the not reading the read me file, in my standby cab zip package there wasnt a read me and neither was there one for the touch power package. I tried following your advice but my kaiser doesn't seem to want to go to sleep automatically even when I have adjusted the settings to do so. I even uninstalled touch power and standby and it still won't automatically shut off the back light and sleep. Do you or anyone else know what else I can possibly do other than a hard reset?
Click to expand...
Click to collapse
have you tried utop's standby program?

umm...."Touch Power" msd?

kaiserII101 said:
umm...."Touch Power" msd?
Click to expand...
Click to collapse
umm....was thinking he was possibly confusing that with the earlier tf3d standby aps, kaiser

Related

Is there a program to "wake up" my Kaiser

I've tried finding an answer to this question in the FAQ and Wiki, but without success.
Do any of you know of a simple program that, when run, will awaken my Kaiser out of sleep mode? In other words, a program that will turn on the backlight when executed?
The program really doesn't have to do anything. I just need it to come out of sleep mode for a short, automated task that I need to run during the night while I'm asleep.
Thank you,
Peter
Yeah, there's an actual button to do it, it's on the right side near the top. I'm pretty sure you've used it since you know how to turn the screen in the first place. Wow...
It's called the Power Button ...
kristoff_sz said:
It's called the Power Button ...
Click to expand...
Click to collapse
which he can somehow teach himself to press while he's asleep??
he's looking for a program that automatically does what the power button does at a specific time, I have not heard of one but then again I've never looked for one.
Try using Schaps Advanced Config tool and set Time to wake up to 90sec(or install SPB Time and check "Wake up fix"). it seems that OS just dont get enough time to power up to wake up
It should work.
Ptravel alarm works fine to me

HTC Tilt keeps selecting stuff, help needed

Hi guys,
I have a HTC tilt and overnight something wierd happened to it. I switched it on and its was scrolling through the home tab by itself and now thats fixed but its scrolling through all the options in the start menu when it is opened. I flashed a new rom to it, but the same problem persists. When i press the power button to send the phone into suspend mode, the screen switches back on in 2 seconds. I would really appreciate if you guys could help me out. Thanks
check if ur jog wheel on the right hand side is stucked or what. that the only thing I can think of whoich scrolls without u touching.
I have tried that, it doesnt seem to be the problem because when its scrolling and i press any other button, it stops scrolling till the phone is on. But when i put it in suspend mode and it switches back on, the same problem. I dont know what could be causing this problem.
then i think its like a circuit problem or something, cause it means that something is being pressed at all times on a board, which excites screen and scrolling . did u put it in ur pocket and sat tight or something ! j/k
and u also said that it persists even with change of rom, so I think it might be a hard ware problem !
hmm..it did fall down like a week ago, but the problem just showed up last night. Do you think i should open it up and check it out from the inside. But if something is being pressed at all times then the pressing of a button shouldnt stop the scrolling and the phone shouldnt come out of standby by itself.
rashidali_88 said:
hmm..it did fall down like a week ago, but the problem just showed up last night. Do you think i should open it up and check it out from the inside. But if something is being pressed at all times then the pressing of a button shouldnt stop the scrolling and the phone shouldnt come out of standby by itself.
Click to expand...
Click to collapse
okay if it is in warranty dont open it up, even if isnt in warranty,uless u know how to fix it dont open it.
okay, so in first post u said, it was scrolling on home plugin and u stopped it. can u let me know how ?
well i just played around with it a little bit, did a couple of soft resets and took out the battery put it back in, and then did a hard reset. With that it stopped scrolling on the home plugin but then i cliked the start menu and it was scrolling there, then i flashed the rom and it was scrolling through everything i opened, contacts menu options and what not. It only stopped when i pressed a button and then it was fine till i didnt put it in suspend mode. After i put it in suspend mode it switches back on with 2 sec and the same situation. When i leave the screen on, it switches after some time but the QWERT keyboard under it is always on as in you can see the lights on from the small space.
anything, anyone, i did find a temporary fix, it i went into flight mode and switched on the wireless and the bluetooth. The pda remained in suspend mode and the automatic scrolling stopped. But I need a permanent fix.
This has been the most unhelpful forum EVER....
according to what you say it appears that problem is caused by your radio (radio) rom
try different radio first
try different rom second
best wishes,,
rashidali_88 said:
anything, anyone, i did find a temporary fix, it i went into flight mode and switched on the wireless and the bluetooth. The pda remained in suspend mode and the automatic scrolling stopped. But I need a permanent fix.
Click to expand...
Click to collapse
I have tried doing that, i changed from Duttys Hybrid Rom to the HTC tytn rom and i m pretty sure that changed the radio too...But i still have the same problem. I have heard theres a fix by ATT for the tilt when it does something like this, but i cant find it.
Any Help ?
not really try the xda wiki section
i never heard of that fix but try it - you dont have much choices
good luck
I just purchased a Tilt yesterday and I'm having the exact same problem. Sorry I don't have any answers but just wanted to let you know it's not just you. I'm planning on just exchanging the phone tomorrow since obviously no one has any clue what the problem is. Anyway...good luck friend.
Pez
Hey,
Ya i have heard of these cases, apparently ATT has a fix for it, could you be kind enough to ask them for the fix. I would really appreciate it.
Thanks.
yah i have the same problem as of the past few days if anyone can find this fix let me know please.
any news anyone ?
so now my phone wont hit the down button that much ne more its just the up button now, so im beginning to think its not hardware issue

HUGE problem ! HELP ! ( phone wakes on it's own ) (i uploaded a clip so ypu can see)

my TyTN II can't co to sleep - when I press the POWER button it goes to sleep and after 3 seconds it wakes again
PLEASE HELP ME
P.S. and it can not do a HARD RESET with the buttons
_______________________________________________________________________________________
here is a clip that I shot with my camera so you can see what is the problem
RAPIDSHARE - http://rapidshare.com/files/145255212/SL550774.MP4.html
GOOGLE VIDEO - http://video.google.com/videoplay?docid=2057235928163515395&hl=en
_______________________________________________________________________________________
Looks like a software or a regedit is keeping it from doing so. Try resetting the device and see what happens.
kareem9nba said:
Looks like a software or a regedit is keeping it from doing so. Try resetting the device and see what happens.
Click to expand...
Click to collapse
I did a soft reset - nothing
I did a HARD RESET- nothing
I changed the rom - nothing , it still wakes up
This has nothing to do with ROM Dev. Moved to General
I don't have a clue what it is
Ok i have had this problem before. But it is when i put the phone in universal car cradle. It hits the camera button half way so when i put it to sleep, it wakes back up after about 3 seconds. Make sure none of the buttons are partially stuck.
Frank
yes , now it has no autofocus
fordmav said:
Ok i have had this problem before. But it is when i put the phone in universal car cradle. It hits the camera button half way so when i put it to sleep, it wakes back up after about 3 seconds. Make sure none of the buttons are partially stuck.
Frank
Click to expand...
Click to collapse
and how did you fix it ???
do I have to open the phone or there is a softwere way to fix it ?
here is a clip that I shot with my camera so you can see what is the problem
RAPIDSHARE - http://rapidshare.com/files/145255212/SL550774.MP4.html
YOUTUBE - I'm uploading it there now , i will give you the link asap
UPDATE !!!!!
are you running igo8 in the background? Turning the phone off while running an *ahem* type of Igo8 may cause certain on/off issues...
I'm not running anything
Sorry bout the late reply. I work during the day so i didnt see this till now.
What i would suggest is turn on the camera and goto the settings. Make sure it asks for full press. Then attempt to take a picture, by half pressing the camera button, as this will make it auto focus. If the little broken square in middle of screen doesnt show, then it has something to do with your problem.
My problem wasnt an actual problem but rather an observation that i thought could help.
Ive just done a couple tests on my phone and the camera button is the only thing that causes this issue. I hold it half way as to not activate the camera and then turn the phone off to sleep, but after precisely 3 seconds, it wakes back up
Hope this helps you find it. As for solving it, i don't know. Possibly a few harder presses of the camera button???? Please, though, dont take what i am saying as Gospel as it may be something totally unrelated
Frank
i tried the thing with the setting for the full and half press and nothing , it was the same - the camera shoots ONLY WITH A FULL PRESS !
The good news is I took it for a repair
Hope u get it back soon with minimal repairs needed
Frank
more bad news - it turnd out that the camera button is realy stuck on auto focus but the realy bad thing is I CAN'T FIND A SPEAR CAMERA BUTTON
help me pleaseeee !!!!
I have this exact problem...press power button--3 seconds later phone back on again. Have flashed 6 different ROM's and it has not removed this issue. It is not any of my software because this remains before I add any of my software after a flash.....as per OP i am unable to do a hard reset.
I have done many searches on the forums and continually come up with the 10 second backlight fix....this is not the same issue.
If some of the senior members could please help I would greatly appreciate it.
Currently running a kaiser w/ L26 light...Hard SPL 3.29
griffin911 said:
I have this exact problem...press power button--3 seconds later phone back on again. Have flashed 6 different ROM's and it has not removed this issue. It is not any of my software because this remains before I add any of my software after a flash.....as per OP i am unable to do a hard reset.
I have done many searches on the forums and continually come up with the 10 second backlight fix....this is not the same issue.
If some of the senior members could please help I would greatly appreciate it.
Currently running a kaiser w/ L26 light...Hard SPL 3.29
Click to expand...
Click to collapse
At the moment my biggest problem is that i cant' find nother camera button for the motherboard
shtepsel said:
At the moment my biggest problem is that i cant' find nother camera button for the motherboard
Click to expand...
Click to collapse
It's not listed on their site, but it might be worth contacting these people.

diamond comes out of standby unregulary or when put on a table

Hello
I got an new Touch diamond because of warrenty reason.
Since i have this new phone, i have problem with this.
I try many custom roms from here. now i have BsB 6.5.1F on it.
My problem is: This phone comes out of standby unregulary.
Often i is "on" when i take it out of my jeans or i when i push the ON/OFF button on the top of phone and put i on a table, i can often see how it comes out of standby.
Can anyone help me!?
chaos_taker said:
Hello
I got an new Touch diamond because of warrenty reason.
Since i have this new phone, i have problem with this.
I try many custom roms from here. now i have BsB 6.5.1F on it.
My problem is: This phone comes out of standby unregulary.
Often i is "on" when i take it out of my jeans or i when i push the ON/OFF button on the top of phone and put i on a table, i can often see how it comes out of standby.
Can anyone help me!?
Click to expand...
Click to collapse
the on/off button is also used to turn the screen on and off, maybe thats why its happening
mancsoulja said:
the on/off button is also used to turn the screen on and off, maybe thats why its happening
Click to expand...
Click to collapse
What do you mean? I push this button mostly for turning it off. screen off and standby is the same for me.
I mean when i put i on the table or wait a few seconds the screen comes back on wihtout pushing the ON/OFF button again
chaos_taker said:
Hello
I got an new Touch diamond because of warrenty reason.
Since i have this new phone, i have problem with this.
I try many custom roms from here. now i have BsB 6.5.1F on it.
My problem is: This phone comes out of standby unregulary.
Often i is "on" when i take it out of my jeans or i when i push the ON/OFF button on the top of phone and put i on a table, i can often see how it comes out of standby.
Can anyone help me!?
Click to expand...
Click to collapse
You can install TouchLockPro as locking solution.
You can enable debug logging of TouchLockPro, so maybe that gives insight why your phone is awakening, by checking the log file \TouchLockPro.log.txt.

Buttons Not Working and severe battery Drain

Hi hope someone can help. Over the weekend my TD2 started playing up. All of the hardware buttons apart from the on/off button have stopped working. I also notice that if I turn the screen off with a short tap of the on/off button, after a few seconds it comes back on again. All touch screen functions are ok. It also appears to be draining the battery very quickly, to the extent that fully charged at bedtime (no bluetooth or wifi on and a stable 3-4 bar signal) it will be comppletely drained by morning. As far as I am aware the phone has not gotten wet at all.
I have also re-installed the office HTC rom, which made no difference
Any ideas??
So you reinstalled the stock rom and did a hard reset?
You can try Tarkim's Keyboard controller and see if your hardware keys can be mapped to a different function.
That would help eliminate hardware vs software issues.
I have the same problem. Also my backlight keeps working and won't go off. Can't perform a hard reset because my volume buttons(and all other hardbuttons accept the on/off) aren't working.
Searched for the solution but can't find it anywhere. Who can help me?
daanbrok said:
I have the same problem. Also my backlight keeps working and won't go off. Can't perform a hard reset because my volume buttons(and all other hardbuttons accept the on/off) aren't working.
Searched for the solution but can't find it anywhere. Who can help me?
Click to expand...
Click to collapse
Try clear storage app to HR.
Thanks for your reaction.
Yesterday I managed to put an official ROM on my phone.(latest from HTC site).
Problem only got worser. Phone gets complety stuck(directly after boot) in the volume screen. Sometimes its flashes back to the normal screen but only for 1 second. Buttons still aren't working so can't do anything with my phone right now( not even the hard reset methode you told me).
Started to think that this is really some hardware issue. Can't remember that water got in my phone or the phone felt really hard. Any solutions maybe?
Otherwise I think I just go to the store.
daanbrok said:
Thanks for your reaction.
Yesterday I managed to put an official ROM on my phone.(latest from HTC site).
Problem only got worser. Phone gets complety stuck(directly after boot) in the volume screen. Sometimes its flashes back to the normal screen but only for 1 second. Buttons still aren't working so can't do anything with my phone right now( not even the hard reset methode you told me).
Started to think that this is really some hardware issue. Can't remember that water got in my phone or the phone felt really hard. Any solutions maybe?
Otherwise I think I just go to the store.
Click to expand...
Click to collapse
One last thing you can try is a Task29 explained here.
Use your official rom (right click on .exe and extract the RUU_Signed.nbh and place in task29 folder, then connect device in Bootloader mode and run the Task29.exe. Follow the instructions in the link.

Categories

Resources