Growing panel not in panel list? - XPERIA X1 Q&A, Help & Troubleshooting

Hi
I have installed the growing panel, and in exitement i went to panelmanager and tried to find the growing panel. But it is not in list.. It is showed in settings/installed programs... Is this becuase i use a danish rom?(generic R2A)
Oh and i have installed the ActiveX thing...

You must install the Active X. And look on the folders: Do you have:
Program Files\Panels\Growing Panels...

I have installed "Sony Ericsson Flash Deployment" is this the correct active X thingy?
And yes i have that panel folder..

The panel installs into the "program files" folder - in German e.g. "programme". If thats the case you have to change the registry entries to "programme" instead of "program files" which they are right after installation. this counts for every non-english installation.

That did the trick
So i simply opened the reg with total commander, found the panels/growing panel, and edited all the paths(6 og 7 i think) thank you

ive the same problem, ive allready installed the activex flash thing , im from germany and i switched the registry to "programme" but it does not work , could it not work because iam usin an older rom ?

what reg did you guys open?
I don't find it. I have the original T-Mobile dutch rom.

you need a program like this http://freewareppc.com/utilities/phmregistryeditor.shtml

its in registry\HKLM\Software\SonyEricsson\PanelManager\Panels\Growing Panel

For german roms, you must not edit the registry. Make a new folder in xperia: Program Files - And here you move the tree "Flash Panels" and "Panels - Growing Panel" from Programme

thanks for the usefull information, it works , good reply "thumbs up"

Thanks! It works eventually!
Looks nice!

Ok, I changed the Cab file so it works on the Dutch X1. Download Below
Growing Panel

toppie jongen. Erg mooi. Houd namelijk niet zo van reg's aanpassen.
thanks friend. very nice. Don't like to change reg's
Wieger

Hi growing panel start up problem
azez1982 said:
Hi
I have installed the growing panel, and in exitement i went to panelmanager and tried to find the growing panel. But it is not in list.. It is showed in settings/installed programs... Is this becuase i use a danish rom?(generic R2A)
Oh and i have installed the ActiveX thing...
Click to expand...
Click to collapse
I installed the growing panel on my phone, when i set the panel and try opening it a error message pops out saying " Error occurred with the panelcontainer.exe" any idea how to go about it , help would be really be appreciated...very excited about the panel ...and am hoping SE is gonna step up its game in the panels and come up with some more fancy stff!!

Cant download it..
kbloem said:
Ok, I changed the Cab file so it works on the Dutch X1. Download Below
Growing Panel
Click to expand...
Click to collapse
Hello,
Do you have maby an other link.. i cant download it from rapidshare.. Hope you can help me.. ThnQ in advantage.. Greetz nanja

I've the same problem, but in the registry, i see that i need a "flash panel" folder, which i don't have. Is this from a program that i need to install ?

It's Working now, i followed this Thread : http://forum.xda-developers.com/showthread.php?t=565158

Related

Helmi BA WM2k5 AKU3.0 Beta (v.1.1 Beta)

Helmi BA WM2k5 AKU3.0 Beta (v.1.1 Beta)
01. Ramdisk 32mb (just plain ramdisk no more experimental crap)
02. Storage Card Extended_ROM (Create ExtROM dir on ur Storage Card) so u can hv full size wm storage.
03. MMS Composer v3.0.16.6 Built On ROM, send/receive ok mp4, 3gp,jpg,etc (Just need to Enable with MMS_Enable.cab, included in Extrom Pack)
04. Album v.3.0 (Built 17747)
05. Camera v.2.21 (Built 19307) Record Video/Picture and Send to MMS ok (when sending picture the dialog might dont hv a caption on MMS)
06. PocketMSN, Hotmail Ok.
07. Wifi/BT/Ir ok.
08. No limitation on installin App (no problem when installin SPB Plus etc)
09. ActiveSync Ok.
10. Extra App Built in. (Data Backup, Flight Mode, Phm Registry, etc)
11. Speed tweakin enable, sorry for the Beta 1 release I dont include speed tweakin. this release is included now....
12. Mp4, Amr, Wav, wma, as ringtone is workin now.
13. New Shell Icon (Control Panel, Folder, etc).
EDIT:
14. BTA2DP WORK see attachment.
Known issues:
01. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA.
02. Sometimes System complain about missing Pimg app (I've strip them out, cos its useless , fix is below PIMG)
03. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
04. Some help file and Some Silly Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
01. Disable Sound (Sound & Notification >> Events) might help system speed.
02. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
03. Backup ur PIM with active sync first (Contact, email, etc) before u upgrade to AKU3.0 if u upgrade it from old rom (anything below AKU3.0 ROM)
been use it for 4 days now... seems stable...btw its still beta, and might be not suitable for daily use, input is welcome...
download here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.1b.rar
or here
http://micmeo.com/BlueAngel/AKU_3.0/Helmi_WM2k5_AKU3.0_32mb_v1.1b.rar
thanks micmeo ur really helpfull..thanks!.
For anyone download before please re-upgrade ur ROM with the newest one, since the previous AKU.3.0 has a critical bug. (missing files)
Please read the readme file, I dont hv time to update Wiki page, I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
Btw The EXTROM folder is included Indonesian GPRS/MMS Setting, if u not Indonesian just delete it and change with ur county/region setting CAB, just follow the ilustrated method on the Cfg.txt/Autoconfig.txt file to make changes that suite ur need.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
Operator AutoConfig (GPRS/MMS):
For Most Asia and O2UK Operator Autoconfig
go here:
http://forum.xda-developers.com/viewtopic.php?t=57279&postdays=0&postorder=asc&start=125
And for middle East GPRS/MMS/WAP AutoConfig:,
Batelco,Etisalat,Eygept Vodaphone,Fastlink,Jawalnet,Maroc Telecom,Mobinil,MTC,Oman Mobile,QTel,Syriatel,Vodaphone,Wataniya,WIND
go here:
http://forum.xda-developers.com/viewtopic.php?t=57279&postdays=0&postorder=asc&start=175
Thanks for your diligent work,I will test this rom as soon as possible
WoooooooooooooooooooW
thank you
Dowloading Now
well done helmi_c,
aku3 has a nice startup screen eh
testing it now. thanks
can you show us some images from the new rom, thanks
Looks good
I've just installed the new rom and so far so good. Installation went smootly, active sync is working (and much faster then on aku2.3).
The first thing I notived was the option to SKIP the moving of the appointment during the start-up. This has been something that has annoyed me a lot. Finally the option to skip it .
The other thing I have noticed are the soft-buttons: They are not assinged (and default to "active sync").
Other then that, it looks good and I will start to install some software now.
Thanks for this one.
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
EDIT: this attachment is not necesary I've already fix the issues in ROM. sorry for this.
sint2006 said:
can you show us some images from the new rom, thanks
Click to expand...
Click to collapse
its just the same looks, but the OS is new built, and maybe the newest wm5 available.
helmi_c said:
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
Click to expand...
Click to collapse
I had tried both of the cab files but still the same I cant install the Arabic software
I will attached my Arabic cab file her
BTW it was working perfectly in Helmi_BA_WM2k5_AKU_2.3_32mb rom
Please help because without this software I cant read or write Arabic and then this rom will be useless for me
Isaac said:
helmi_c said:
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
Click to expand...
Click to collapse
I had tried both of the cab files but still the same I cant install the Arabic software
I will attached my Arabic cab file her
BTW it was working perfectly in Helmi_BA_WM2k5_AKU_2.3_32mb rom
Please help because without this software I cant read or write Arabic and then this rom will be useless for me
Click to expand...
Click to collapse
oke, btw the file u send is quite old, I hav a new one, and I'll try to make it work with this rom. give me some time..
Helmi you rock. This ROM is quick, and works flawlessly for my needs. AS is super fast and the new look of the icons is pretty neat.
Thanks and I can't wait to see the improvements you have in store for the next release.
helmi_c said:
Isaac said:
helmi_c said:
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
Click to expand...
Click to collapse
I had tried both of the cab files but still the same I cant install the Arabic software
I will attached my Arabic cab file her
BTW it was working perfectly in Helmi_BA_WM2k5_AKU_2.3_32mb rom
Please help because without this software I cant read or write Arabic and then this rom will be useless for me
Click to expand...
Click to collapse
oke, btw the file u send is quite old, I hav a new one, and I'll try to make it work with this rom. give me some time..
Click to expand...
Click to collapse
you have a new Version of Arabic Windows Mobile (FJE) ???
Take your time
Okay found a problem. Pocket Hack Master 3.33 won't install. Says "Critical Component Missing"
Never had this before. Tried reinstalling it several times, no go. What version of the .NET framework does this ROM run?
Not a lot to say really....
...except, absolutely stunning!
Everything works first time that I have tried, Pocket MSN, all the Apps, even WiFi in Comm Manager (Clicked on 'Settings' within Comm Manager, turned on WiFi... worked off the bat, and switches on/off no probs!)
Off to take a look at the A2DP... don't expect too much, no matter what I did with AKU2.3 it wouldn't start the service... but I'll give it a shot )
Off to rebuild the server under the stairs as an Exchange Box to make the most of the Push functionality !
Edit: EtenPack Call Filter doesn't play... 'Cannot open 'PfUi'...' not an issue, I can use an alternative!
Shocked and awed
Helmi, what can I say?
This is just incredible.
It's better than any professionally-made BA Rom I've seen.
Congratulations, and thanks for this amazing ROM.
Superb job helmi - really, just an excellent ROM.
I have two (minor) issues with the push email though;
Each time a new email arrives I get an alert (with sound) along with a preview of the message - in the AKU 2.3 ROM you did I would get a silent notification just saying 'xx messages unread'. I much preferred the older type of notification.
Spam is now appearing in the inbox - even though Outlook has filtered it into it's junk mail folder - again the AKU 2.3 ROM didn't do this.
Is this AKU3 standard functionality now or are these settings we have some sort of control over?
spkr4thdd said:
Not a lot to say really....
...except, absolutely stunning!
Everything works first time that I have tried, Pocket MSN, all the Apps, even WiFi in Comm Manager (Clicked on 'Settings' within Comm Manager, turned on WiFi... worked off the bat, and switches on/off no probs!)
Off to take a look at the A2DP... don't expect too much, no matter what I did with AKU2.3 it wouldn't start the service... but I'll give it a shot )
Off to rebuild the server under the stairs as an Exchange Box to make the most of the Push functionality !
Click to expand...
Click to collapse
spkr4thdd, I would be interested in knowing how you got ur exchange server setup, something I have been thinking of doing myself. Any chance of a tutorial or walkthrough/tips? Probably best by PM. Thanks.
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.1b.rar <--- File size is 555KB. That ROM probably changed by someone.
And there is another ROM at: ftp://xda-developers.com/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.1b_BAD_ROM.rar. Should I make a mirror for it?
Hi,
why is this download only 555kb and not like other ROM's 28Mb or more?
Sorry Micmeo is ahead of me

Usefull tips for your new official wm6

(Please dont post to many questions here, lets keep it simple so that we dont get overflowed with questions probably answered 50 times before in other threads)
Ok, I want us to stick to one post if possible, for tips on how to in.ex make the HTC Home to work on our native languages.
If you have sollutions that works, post it here. (If you find the sollution in another post, give credits, and link to the post)
I found this
http://forum.xda-developers.com/showthread.php?t=316107
Here it explains how to rename the mui files in windows so that the HTC home will work:
I did following
Installed Total commander
I went to windows folder, I selected all files and folders, then properties, unchecked "read only"
Then I renamed
HTCHome.dll.0409.mui -> HTCHome.dll.0414.mui
HTC HDlg.exe.0409.mui ->HTC HDlg.exe.0414.mui
HH_0409_WeatherCities.xml -> HH_0414_WeatherCities.xml
htcbtql.dll.0409.mui -> htcbtql.dll.0414.mui
(0414 is the norwegian countrycode)
then voila, HTC Home on my norwegian wm6
New 26.08 The mfrazzz_CommManager_8button_wizard.cab
This commManager works great and I have no problems at all with it
New 26.08 Tips from fultotop regarding problems with installing the touch dialer in wm6 :
To Install reTouched Dialer you need to :
1. Delete delete this registry key : HKEY_LOCAL_MACHINE\Software\HTC\PhoneCanvas
2. Install Wizard_reTOUCHed_Dialer2.cab
New 26.08 Fultotop have provided a reg fix.
fultotop said:
Import this Registry file in the attached zip & it will fix the black dialer numbers.
Click to expand...
Click to collapse
just import to your registry with a reg edit program (total commander, link provided further up in this post)(see attachments for the reg file)
Great work Fultotop
I will post more about things as I go along..
All the files im posting here are tested and working on my norwegian wm6 HTC P4350
where do i find these codes? for the country?
mm, Its on microsofts website
I dont have the link, but I suppose you can find it by using google
or searching this forum
what country are you from?
Netherlands, Dutch.
I can't find it with Google?
Omg tnx!!! Its working!
I have just downloaded the 10 button comm manager, but my wireless isnt working. Can some post the right device code from the following registry key?
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
I would be really gratefull!
bio88 said:
Omg tnx!!! Its working!
Click to expand...
Click to collapse
What is the dutch country code?
0413. Good luck!
bio88 said:
0413. Good luck!
Click to expand...
Click to collapse
Thank you!
bio88 said:
I have just downloaded the 10 button comm manager, but my wireless isnt working. Can some post the right device code from the following registry key?
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
I would be really gratefull!
Click to expand...
Click to collapse
I can't even install the 10 button comm manager, not enough rights?
Anything I can do about that?
Now, thats weird. I could install it without any problems. Just accept any security warning and install it to the device. Don't know any more ways to "fix" it?
Which one did you install?
Do you have a link to it?
http://forum.xda-developers.com/showthread.php?t=320239
that one
Doh!
I forgot i had my cable attached to my Herald, thus enabling comm manager, thus not installing.
With no cable attached installed perfectly.
Could you please please please look at that registry entry for me? I need it for my WiFi button to work
I installed this and changed the codes to 041D (Swedish) and my Herald wouldnt boot again.. I had to reflash it with the Wm6 RUU.
RSkillz said:
I can't even install the 10 button comm manager, not enough rights?
Anything I can do about that?
Click to expand...
Click to collapse
u need to kill Comm Manager before u install it. If Comm Manager is still running in the background, itll give u that error. Close it properly first.
Btw the 9 button with 3g comm manager seems to be working fine. Wlan works on my herald (htc wm6)
8 Button Comm Manager with working wifi
If you don't want the Comm Manager with 3G use this one here.
Updating my first post
I'm using these cabs for HTC home on my P4350.
Five Tab HTC Home
HTC.Kaiser.Home.Eng.0409.5Tab.schen.N2A_WeatherPatched.cab
Six Tab HTC Home
HTC.Kaiser.Home.Eng.0409.6Tab.schen.N2A_WeatherPatched.cab
More info here.
I've tried the Wizard_reTOUCHed_Dialer2.cab for the new dialer, but could get it to display correctly, but it uninstalled fine.

Himalaya with Manilla2D Working!! (Contacts and Programs working now!)

After watching everybody with problems in adding contacts and programs, i tryed to found what was diferent in my Himalaya (it was working fine in my Hima!).
So i found that when I was trying to make M2D working in Himalaya, i previously installed lots of diferent software, and i did not see what i had diferent from you guys...
BUT KNOW I KNOW!!!!
I had 2 more .cabs in my Hima, they make the diference!!!
FOLLOW THIS STEPS:
See this thread here first:
http://forum.xda-developers.com/showthread.php?t=398173
From there download this update: »[UPDATE 16] September 26, 2008«
Inside the folder "NEEDED FILES" you'll find lots of .cab files
1 - Install "01. OX-ManilaCompatibleSharedDLL.cab"
It will ask to Reboot - Ok reboot!
2 - Install "02. ContactFix.cab"
3 - Download and install this .cab file from here: http://rapidshare.com/files/152207282/Manilla2D-Jack.cab.html
4 - Install "16. Manilla2D_HTC_Patch.CAB"
5 - Soft reset the device... et voila! See now if you can add contacts and programs!
Did not test other functions, but they might need other .cabs in package to run.
NOTES;
I've tryied the M2D version inside the package "15. 2d.Manila.Engine-Beta-0.09.cab"
Works also, but it's more heavy, so Jack version is better.
Also tryed install M2D costumizer with other themes and it's working fine.
HOPE THIS HELP YOU!
Send me your feedback.
(Running on WM6.1 ProEdition CE OS 5.2.21109 (build 21109.2.1.0 NOK) This ROM is very very fast and so far no issues detected)
Thanks to those who uploaded the .cabs first
Hi
Thanks for the links but i think the first file has a problem the it only downloads 11.3 kb and the file size is 11mb correct me if am wrong.
great work thanx....
The links are working... must be something on your pc!
i'll try to find more links....
If you continue with problems about downloading try this link: http://rapidshare.com/files/153782118/Manilla2D-Jack.cab.html
Did not test the cab but might work also ;-)
Esbrugalhose said:
For those who want M2D running on Himalaya...
1 - Download and install this .cab file from here: http://rapidshare.com/files/152207282/Manilla2D-Jack.cab.html
2 - Download and install this patch: http://rapidshare.com/files/147321071/Manilla2D_i760_Patch.CAB.html
After trying everything finally it works!
(Running on WM6.1 ProEdition CE OS 5.2.21109 (build 21109.2.1.0 NOK))
Thanks to those who uploaded the .cabs first
Click to expand...
Click to collapse
Can u hv megaupload lonk pls.?
speed was fine ...i got 45 ...50 kbps...
everythings fine..but i cant add people and programs..can anybody help me?
Contacts and Program tabs not working
abdul.rafay7 said:
speed was fine ...i got 45 ...50 kbps...
everythings fine..but i cant add people and programs..can anybody help me?
Click to expand...
Click to collapse
Same here. Not possible to add contacts or programs to the respective tabs... it looks nice though!
OOT
afr33s said:
Same here. Not possible to add contacts or programs to the respective tabs... it looks nice though!
Click to expand...
Click to collapse
afr33s san„ are u sure use XDA2i/alpine with nokser WM6.1 ? thx....
i've been download the manila2D there is no problem with those link...
hi thanks guys links are ok was my comp. having the same issues no cant add programs or contacts etc.
Downloaded without any problem, Installed- Looks great.
But alas! Same problem- Cannot Add People or Programs. Internet- Launch Browser- not working. Settings- Sounds and Wallpaper no effect.
reefsucks said:
afr33s san„ are u sure use XDA2i/alpine with nokser WM6.1 ? thx....
i've been download the manila2D there is no problem with those link...
Click to expand...
Click to collapse
Good Point! Got some new phones recently and mixed up which was which!
Event the main XDA-developers page says that the XDA IIi may be an Andes or an Alpine!
It is indeed a Himalaya / XDA II!
Whats roms these play to?
I have same problem. With contacts, programs and etc.
After the new instructions in post 1:
*Programs and contacts now work
*Links on Internet tab do not work
*Images on album page work, but do not correctly fit to box....HTC Album only loads briefly and then shuts
*Music tab gives "Cannot play file" error, haven't tested with MP3
EDIT: Installing the Audiomanager removes this error, though I have no MP3s on my phone to test more.
*Cannot add location on Weather page, location list is blank. Probably missing link to .xml list.
I will look into fixes...
Keep it up
Jadel said:
I will look into fixes...
Click to expand...
Click to collapse
Very interesting project. Keep us informed.
UPDATE:
After the new instructions in post 1:
*Programs and contacts now work
*Buttons on Internet tab do not work
*Images on album page work, but do not correctly fit to box....HTC Album only loads briefly and then shuts
FIX: Install HTC AlbumFolder Option.cab after installing the cabs mentioned in post one (and including the AudioManager cab)
*Music tab gives "Cannot play file" error, haven't tested with MP3
FIX: Installing the Audiomanager removes this error, though I have no MP3s on my phone to test more.
*Cannot add location on Weather page, location list is blank. Probably missing link to .xml list.
Fix: Reinstalled all the cabs after hard-reseting phone, all of a sudden it works.
I am still looking into the buttons on the internet tab. I might try installing Opera, or seeing if there is a change in the registry...
Esbrugalhose said:
After watching everybody with problems in adding contacts and programs, i tryed to found what was diferent in my Himalaya (it was working fine in my Hima!).
So i found that when I was trying to make M2D working in Himalaya, i previously installed lots of diferent software, and i did not see what i had diferent from you guys...
BUT KNOW I KNOW!!!!
I had 2 more .cabs in my Hima, they make the diference!!!
FOLLOW THIS STEPS:
See this thread here first:
http://forum.xda-developers.com/showthread.php?t=398173
From there download this update: »[UPDATE 16] September 26, 2008«
Inside the folder "NEEDED FILES" you'll find lots of .cab files
1 - Install "01. OX-ManilaCompatibleSharedDLL.cab"
It will ask to Reboot - Ok reboot!
2 - Install "02. ContactFix.cab"
3 - Download and install this .cab file from here: http://rapidshare.com/files/152207282/Manilla2D-Jack.cab.html
4 - Install "16. Manilla2D_HTC_Patch.CAB"
5 - Soft reset the device... et voila! See now if you can add contacts and programs!
Did not test other functions, but they might need other .cabs in package to run.
NOTES;
I've tryied the M2D version inside the package "15. 2d.Manila.Engine-Beta-0.09.cab"
Works also, but it's more heavy, so Jack version is better.
Also tryed install M2D costumizer with other themes and it's working fine.
HOPE THIS HELP YOU!
Send me your feedback.
(Running on WM6.1 ProEdition CE OS 5.2.21109 (build 21109.2.1.0 NOK) This ROM is very very fast and so far no issues detected)
Thanks to those who uploaded the .cabs first
Click to expand...
Click to collapse
Thanks a lot bro! I've been dying to install M2D in Hima, and you are the only one who has helped me. Your steps are perfect. Highly recommended!
Thank you!!!
Works for me... only installed the first two suggestions
About the Jack cab file, can someone place it on some other site aside from RS?
jack.cab
Hi, the jack.cab link isn't working anymore. it always give me an error. Could you please upload it again? thanks in advance.

Cooking Windows Mobile 6.5 - Problems and Questions

I decided to start this Thread because every "new cook" here is trying to cook a good wm6.5 rom. But there are still Bugs and Mistakes.
I solved some Problems and i still got ones.
maybe we can all share Solutions we found so we can cook a Rom with as less bugs as possible
My Question here:
In the new 21501 build there is the runcc package. I didnt want it so i deleted all the related files and initflashfiles-entries and coked in the checkautorun, autorun and sdautorun (for UC).
In the initflashfile i created the shortcut of checkautorun for the startup folder. But after flash i got : "Theres no Application associated with checkautorun" (or sth. like that) i recognized that my autorun file was deleted due to it was cooked in windows directory.
So my Question: How can i get the normal Autorun thing work?
/edit. because none reacted i tried myself in imitating god. i took a ridge from adam and created eva out of it. i.e. i took some files from the older build and put them in the newer one.... exactly all the OEMdriver files and some OperatorPKG files... will see it it helps
/edit don't help.
i wonder... has noone of you the same errors? Has noone of you the solution for my problem...
Runcc is needed by quite a lot of HTCs apps, as a background process.
it's also how they are starting to do the initial customizations..
http://forum.xda-developers.com/showthread.php?p=3613983#post3613983 have a read for some interesting stuff, there's also other threads on runcc to search for..
It's also one of the reasons why roms are getting quicker..
I'd leave it in..
argh no that i started to learn how things work (the autorun thing) there will be a new standard in customization
that sucks xD
But i thought runcc dont run bugless on our xperia.
I prefer a little slower rom without bugs =)
Kid_DC said:
argh no that i started to learn how things work (the autorun thing) there will be a new standard in customization
that sucks xD
But i thought runcc dont run bugless on our xperia.
I prefer a little slower rom without bugs =)
Click to expand...
Click to collapse
Runcc is also in the X1 roms...
as I said some software needs it to be able to run, it appears to be a file parser.
WM6.5 bugs ???
Good idea for a new thread
I've been struggling the whole year with it
But now it is working fine, hard to domesticate *****, but finally ported to the xperia: all working fine
PS: may I suggest you to stick to the previous 2500 build, no big difference in SYS-XIP filez
hm... would be an idea
.....
a good one ^^
yeah I think you're right
gtrab said:
WM6.5 bugs ???
Good idea for a new thread
Click to expand...
Click to collapse
What a pitty. Looks like no one is interested in sharing Solutions and asking for them.
Seems like all the newbie cooks stopped cooking (haha expected that).
I'm still cooking my little roms I deleted the cc thingy too and had the same error at startup. I just ignored it. Would also like to know how to start the autoinstall at startup, still learning.
Did you manage to assign the right softkey when you're on the clock to htc comm.manager? I got the standard winmo comm.manager right now.
I looked up the regkeys and there's only the left softkey assigned...
This thread would be really nice if all the new cooks would chip in on the problems
I dont work with Runcc anymore ^^ Changed back to 21500 because of that.
As I dont include the HTC Comm Manager in my ROMs that wasnt a bug for me. But i managed to get the Bubble with the Comm Manager Link working like i want --> it refers to winmo comm manager (wrlsmgr.exe)
This Button isnt assigned in registry because its changeable (with new titanium tab there comes a new link)
I think we have to look for the solution in titanium itself.
I've searched through the titanium 800x480.cpr but there was nothin about this
Ha I've got the Fix for ya
See Attachment.
You have to load the provxml at User Costumization at first Start or you can include it in the OEM Folder (dont know if possible..)
Key was at HKLM\Software\Microsoft\CHome
thanks kid_DC for opening up this thread. I do hope the chef masters could visit this thread and answer some of our questions.
I do have a question:
How do I put the Sony Ericsson original animated splash screen into jerpelea's kitchen?
@kid_dc
Thanks, I found it last night too....took me a while...
I just checked out the new, updated Chome editor and it seems that you can change the softkeys with the app now.
Here is the link but I didnt try it yet since I'm at work.
http://forum.xda-developers.com/showthread.php?t=481379
You should also check out the new fave people panel. Pretty awesome stuff.
Personally I use wm 6.5 as my main os now and it just rocks. Just love the new and lite home/titanium. Great job from microsofts side.
There's also the known weather panel and an opera panel.
Also looking forward to see new panels coming.
And about the autoinstall stuff...
mobilevu posted a nice instruction in his rom thread in the 2nd post:
http://forum.xda-developers.com/showthread.php?t=505214
Yeah in my Full Rom (Medium id coming today ) I'll add all the Add-On's to Titanium so its get a very powerfull GUI
Oh so you dont need my fix anoymore ^^ sad to hear that but if you want to change it without any third party apps this is the place to look up
hehe, actually I fixed the softkey last night excatly the same way you wrote!
So I sensed your answer
Looking forward to your rom. Really curious
Kid_DC said:
Ha I've got the Fix for ya
See Attachment.
You have to load the provxml at User Costumization at first Start or you can include it in the OEM Folder (dont know if possible..)
Key was at HKLM\Software\Microsoft\CHome
Click to expand...
Click to collapse
BETTER (and easy) SOLUTION FOR COMM MANAGER NOT BEING LAUNCHED FROM THE TASKBAR ICONS:
Drop this tweaked commmanagerlink.exe file into the OEM/OEMDrivers folder
That's all
How I did it ??
I noticed all REGs and DLLs were pointing to "commmanagerlink.exe" instead of "wrlsmgr.exe"
I rebuilded the wrlsmgr.exe file and renamed it to commmanagerlink.exe
WORK A TREAT
kluks said:
thanks kid_DC for opening up this thread. I do hope the chef masters could visit this thread and answer some of our questions.
I do have a question:
How do I put the Sony Ericsson original animated splash screen into jerpelea's kitchen?
Click to expand...
Click to collapse
1- Copy SEMC*.gif (from R2A) into OEM/OperatorPkg or OEM/OEMDrivers
Write a provxml file to associate it with the starupanimation engine
2- Add the StatupAnimatonEngine PACKAGE to your OEM folder
Piece of cake
PS: If you dunno how to mke a xmp or provxml, get "fileoperations.xml" from R2A base ROM, edit it with NotePad, delete all the other shizzz (but preserving the xml structure !!) and drop it into OEM/OperatorPkg, then invoke your custom "fileoperations.xml" from config.txt (XML: /Windows/"fileoperations.xml")
gtrab said:
BETTER (and easy) SOLUTION FOR COMM MANAGER NOT BEING LAUNCHED FROM THE TASKBAR ICONS:
Drop this tweaked commmanagerlink.exe file into the OEM/OEMDrivers folder
That's all
How I did it ??
I noticed all REGs and DLLs were pointing to "commmanagerlink.exe" instead of "wrlsmgr.exe"
I rebuilded the wrlsmgr.exe file and renamed it to commmanagerlink.exe
WORK A TREAT
Click to expand...
Click to collapse
hm... in my opinion my solution is cleaner and dont produce unneeded files but everyone can decide on their own ^^
gtrab said:
1- Copy SEMC*.gif (from R2A) into OEM/OperatorPkg or OEM/OEMDrivers
Write a provxml file to associate it with the starupanimation engine
2- Add the StatupAnimatonEngine PACKAGE to your OEM folder
Piece of cake
PS: If you dunno how to mke a xmp or provxml, get "fileoperations.xml" from R2A base ROM, edit it with NotePad, delete all the other shizzz (but preserving the xml structure !!) and drop it into OEM/OperatorPkg, then invoke your custom "fileoperations.xml" from config.txt (XML: /Windows/"fileoperations.xml")
Click to expand...
Click to collapse
thanks gtrab, I will try that
kluks said:
thanks gtrab, I will try that
Click to expand...
Click to collapse
Well I have finally decided to share my private personal ROM, you can download it an test it, then dump it and see how I did it, or I can send you the Frankenstein kitchen I used
My knowledge and works belong to xda-devs and all of you, is absolutely public
Feel free take a look at it
gtrab said:
Well I have finally decided to share my private personal ROM, you can download it an test it, then dump it and see how I did it, or I can send you my Frankenstein kitchen
My work is absolutely public
Feel free to use/share/mod/tweac/change/edit/pack/unpack/re-cook/whatever
Click to expand...
Click to collapse
I have downloaded and tried your ROM, it's a great ROM, almost exactly what I wanted in my mind.
I would really appreciate if you could share your kitchen and let me experiment.
big thanks again.

X2 User Support HTC APPS ported to X2

Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
1st pack (Dialer and deps) http://www.multiupload.com/YQGEDIMWJD
HTCScroll_2_0_19221326_00
Video_Telephony_2_5_35575_0
Shared_Modules_1_01_19221333_00
HTCFramework_1_5_19223320_00
Volume_Control_2_2_20113221_00
Contact_Picker_1_0_20113132_00
HTCFont_Link_1_0_19132133_1
Contact_Utility_Engine_1_2_20113727_00
Concurrence_Mgr_1_5_19221227_00
Resource_Proxy_1_0_19221124_00
SharedResource_1_0_20111720_00
Phone_Canvas_Enhancement_4_2_51720111829_0
New_Contact_Card_1_1_20113729_0
2'nd pack http://www.multiupload.com/1D9Z6NCUJK
Manila_2_1_19193517_0
3'rd pack http://www.multiupload.com/R1BXPVJFQV
Album_3_2_20113921_0
CommManager_2_9_U_0 with 12 functios
INSTALATION INSTRUCTIONS
1.Copy files to windows folder
2.import registry with your preferate reg editor
3.REBOOT AFTER INSTALL
you can also delete panel manager and stop slideview to get sime speed
go...go...go...jer.
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I've got a X2 fromm vodafone and is unsoportable. We're waiting for your work.
jerpelea said:
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
Click to expand...
Click to collapse
The best news recently!
I have "tasted" the 6.5.2 update of X2 in some phase, I really liked it. I'm sure the 6.5.3 update combined with manila will make X2 to become the most comfortable gadget for my personal needs.
Many thanks for your efforts jerpela!
Great news, highly appreciated!
phone dialer ported
i will upload it tomorow
uploaded manila with split languages
copy only manila and your language to windows folder
inport registry with your favourite reg editor
landscape is enabled
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Giland said:
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Click to expand...
Click to collapse
for any other file than english you need to rename all 409 files to your country code
this will display english mesages !!!
if you want native language you have to translate yourself
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
bazsikar said:
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
Click to expand...
Click to collapse
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
jerpelea said:
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
Click to expand...
Click to collapse
2nd option worked, thanks! Now testing.
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
ndjorovic said:
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
Click to expand...
Click to collapse
Try to install these.
The bkinking still occurs after pushing slide view key once or twice.
I have other issues also but before sharing them maybe I should try patch.reg but it doesn't work.
Error message comes "line 302 - unsupported DirID 1" (HKCR) and line 234 in HKLM.
Besides it's very good feeling to have manila on X2. Now I won't feel to change back to X1 every now and then.
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
marcuchinonis said:
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
Click to expand...
Click to collapse
First I had to uninstall some apps when i tried it before hard reset. I don't know if you use SE User Guide (it's 4-5MB) or pixel city panels.
I am not an expert at all either, only trying to discover registry things, just managed to make the attached 2 cabs of jerpelea's all.reg and manila.reg and manila works after installing them.
I encountered some problems in the People tab.
When I click the All People button Manila restarts, the same thing happened when I click Updates & Events in a contact...
Is there any way to solve this?
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
ndjorovic said:
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
Click to expand...
Click to collapse
you need to copy all packages and install regs
not just 2

Categories

Resources