Database Develop

Those with Tilt...can you get ICS?

Hey guys,
Im having a hard time figuring out why I cant get ICS working with my AT&T data plan. When in the ICS window, I select usb or bluetooth, then medianet, and hit connect. I immediately get an error "cannot connect for unknown reason". I cant sem to find a solution this problem. Can those of you on AT&T that have ICS working tell me what data plan youre on and what settings you have in connections? Thanks for all your help!!

I am on Medianet Personal Unlimited, the $39.99 package. Works like a charm, did you select USB and medianet as the internet connection method? I think by default it selects At&T GPRS as the connection method.

Yeah, I tried both available connections, medianet and ATT ISP, and on USB and bluetooth, still get the same error....I cant figure this out..How is your medianet connection setup (server, username, proxy)? Thanks for your help.

lansa said:
Yeah, I tried both available connections, medianet and ATT ISP, and on USB and bluetooth, still get the same error....I cant figure this out..How is your medianet connection setup (server, username, proxy)? Thanks for your help.
Click to expand...
Click to collapse
Well, it shouldn't be a network connection setting on the device because whether you have the ATT or HTC ROM installed it automatically sets everything up just fine.
Where are you getting this error, on the phone or the computer? What OS are you running on your computer? Any other info with that error? Are you running the stock ATT ROM, or HTC ROM? Have you installed any third party apps?
Give us some more info so we can be of better help.
(I'm using MediaNet without a problem via USB and bluetooth, with and without the proxy)

OK, first off, the phone is not connected to to the pc when this happens, since I am trying to get it to work as a wifi AP. Phone is running stock AT&T ROM. I go into ICS window, select Bluetooth PAN and MediaNet, click connect, it says "need to activate bluetooth (which it does)and then immediately get the error, it doesnt even try and connect. I've installed 3rd party apps, but nothing that should interfere with data connection. Am I missing a step?

lansa said:
...since I am trying to get it to work as a wifi AP.
Click to expand...
Click to collapse
Do you mean that you're looking to use Internet Sharing over WiFi rather than Bluetooth/USB? If so, how, since that's not a valid "target" for either selection box? I suspect there's a hack involved here that might be your issue.
select Bluetooth PAN and MediaNet
Click to expand...
Click to collapse
Do you have any partnerships established with a PC? Maybe the error you're getting is related to that. Mine fires off a message about entering discovery mode whenever I launch it when Bluetooth is enabled.
and then immediately get the error
Click to expand...
Click to collapse
The only time I get the "Cannot Connect for an Unknown reason" error is because I'm going after isp.cingular. I'd recommend re-running Connection Setup from Settings-Connections to see if in your explorations you've somehow damaged the Media Net configuration. To me, it sounds like you've got an issue on that end. For example - the Media Net connection doesn't appear as a "real" connection on my TyTN II when I hit Settings-Connections- Manage Existing. But it is selectable from the pull down under the Advanced tab-Select Networks. If I don't replace "The Internet" there, I'll get the error sometimes.

PerfAlbion said:
Do you mean that you're looking to use Internet Sharing over WiFi rather than Bluetooth/USB? If so, how, since that's not a valid "target" for either selection box? I suspect there's a hack involved here that might be your issue.
Click to expand...
Click to collapse
Yes, there is a sharing over WiFi hack posted, just need to make a registry change and point Bluetooth PAN to your WiFi adapter. But even before I make that change, I stll get the error
Do you have any partnerships established with a PC? Maybe the error you're getting is related to that. Mine fires off a message about entering discovery mode whenever I launch it when Bluetooth is enabled.
I have a BT partnership which works fine.
The only time I get the "Cannot Connect for an Unknown reason" error is because I'm going after isp.cingular. I'd recommend re-running Connection Setup from Settings-Connections to see if in your explorations you've somehow damaged the Media Net configuration. To me, it sounds like you've got an issue on that end. For example - the Media Net connection doesn't appear as a "real" connection on my TyTN II when I hit Settings-Connections- Manage Existing. But it is selectable from the pull down under the Advanced tab-Select Networks. If I don't replace "The Internet" there, I'll get the error sometimes
My MediaNet connection is wap.cingular and otherwise works fine.
When you go to HKLM\Comm\ConnectionSharing\PrivateInterface in your registry, what value do you show there? I keep changing mine to BTPAN1, but when everytime I go back into the registry, it shows up with no value at all (deletes the BTPAN1). Could this be it?

Please Please Please someone respond to wifi connection problems

hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before

What about DNS??

plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.

ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either

are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...

yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units

Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.

Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.

ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant

Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.

Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm

hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further

yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again

Excellent news!

oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!

This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem

-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?

yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(

-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.

ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol

can't connect to skyfire beta

I just got the beta download via text.. installs good, when i try to log in upon startup i get a "connection to the internet could not be found. You may be in flight mode. Please verify your network connection settings are correct and try again. (000_2003)"
i can browse with opera just fine. any ideas?

i get this same problem when I try to connect using my Tzones $5.99 plan. When I connect via WiFi it works just fine. Skyfire FAQ's say it will not work with Tzones $5.99 plan, only the Unlimited Tmobile Internet plan.

I had the same problem and found this solution to work. In your phone go to
pmcall said:
Start|Settings|Connections|Connections|Advanced|Select Networks|MEdia Net|Edit|Proxy Settings| ->uncheck the "This network uses a proxy server ....."
Click to expand...
Click to collapse

KroniK187 said:
I had the same problem and found this solution to work. In your phone go to
Click to expand...
Click to collapse
I tried all of that and it still does not connect!

bcrisp82 said:
I just got the beta download via text.. installs good, when i try to log in upon startup i get a "connection to the internet could not be found. You may be in flight mode. Please verify your network connection settings are correct and try again. (000_2003)"
i can browse with opera just fine. any ideas?
Click to expand...
Click to collapse
Don't ask me why, but when I entered my email address etc from the physical (side opening) keyboard (not the small electronic keyboard) it all worked immediately! No understanding as to why.

KroniK187 said:
I had the same problem and found this solution to work. In your phone go to
Click to expand...
Click to collapse
Thanks for the info, I was having the same problem and this fixed it for me. Many thanks.

also try this method
I was having the same problem, I went to comm manager turn off phone, just turn on Airplane mode then turn phone off and launch Skyfire, it work.

bcrisp82 said:
I just got the beta download via text.. installs good, when i try to log in upon startup i get a "connection to the internet could not be found. You may be in flight mode. Please verify your network connection settings are correct and try again. (000_2003)"
i can browse with opera just fine. any ideas?
Click to expand...
Click to collapse
I had the same problem. Try going to Settings>Connections (Tab)>Connections(icon)>Advanced(Tab)>Select Networks. Where it says "Programs that automatically connect to the Internet should connect using:.." hit edit, then go to Proxy Settings (tab) and uncheck the box that says "This network uses a proxy server to connect to the Internet." Hit Ok then try to launch Skyfire Beta and you should connect. This browser is AWESOME! Enjoy!
bigdawggs

I am getting the same error. I tried the changes mentioned with the proxy, and for some reason when I go back, the proxy server boxes are checked again. What's up...?

had to reset my password a few times also...works just fine now
Check your Task manager settings for closing pages maybe, perhaps the page settings are not being confirmed when you close the page. Had these same connectivity issues, unchecking the proxy box or switching to isp and using Wi-fi fixes this issue for At&T. Truly an Awesome browser supporting every version of flash player on the real net, redtube anyone? Can't wait for Opera to integrate this

The skyfire beta server is often down thus makes you unable to connect, wait a bit and try to connect again you'll be able to log on and such. I found the server to be quite unstable at current beta test stat.
waynehathaway said:
I am getting the same error. I tried the changes mentioned with the proxy, and for some reason when I go back, the proxy server boxes are checked again. What's up...?
Click to expand...
Click to collapse

do this
ok. disable proxy that should work.. it doesn't?
ebable HSPDA and make sure your WAP setup right.
my 2c

Lost network connection
I cant connect to the internet using skyfire even with wifi.wen i try to connect this error appears
"lost network connection.please try again later"
pls help me,thnx in advance

naheelja said:
I cant connect to the internet using skyfire even with wifi.wen i try to connect this error appears
"lost network connection.please try again later"
pls help me,thnx in advance
Click to expand...
Click to collapse
Is this skyfire registered to your phone? If you just dl'd the skyfire cab it won't work unless your'e registered for beta testing.

i had a problem using opera to download the cab. Use IE and you should be fine.

thnx dude..i jst installed the cab.that may be the problem.i registerd for the beta testers.but i am nt living in usa..thats the prob

disabling the proxy setting did the trick for me, thank you!

KroniK187 said:
I had the same problem and found this solution to work. In your phone go to
Click to expand...
Click to collapse
Thanks KroniK - This fixed my problem !

good you fixed it i never had a problem with my skyfire i think its differnt for some people

bilbobrian said:
Is this skyfire registered to your phone? If you just dl'd the skyfire cab it won't work unless your'e registered for beta testing.
Click to expand...
Click to collapse
But why same cab works with other devices who also did not register?
Must be s.th. else then..

Wireless problems

I have flashed my Qtek 9090 to WM6.5.5_23529_eng.
It detects the wireless networks but when I try to configure the networK, ny home wireless is configured to WPA2-PSK encryption AES on my Qtek only appears WPA-PSK on data encryption only appears TKIP.

that is not rom dependant. the most secure encryption the BA supports is wpa-psk, no aes, no wpa2. if you want to integrate the ba in your network you'll need to set you access point's settings down. also make sure, that you have wi-fi b/g simulcast, wi-fi g only also won't work.

Wireless problems 2
Hello, I've also flashed my blue angel with WM6.5.5_23529_eng and wireless do not work neither, while is was working with W2003 before flashing (so no hardware problem). Please note that same settings work with other 2 angels: w2003 & w6.1 and router is at home. Settings are:
infrastructure
wpa-psk
tkip
key is 26 chars alpha
These settings also work with a laptop and a netbook.
Do you have an idea to solve this?
Thanks for all your help

what exactly is the problem?
is the wi-fi not turning on?
does it not find the network?
or does it not connect?
or does it connect, but you cannot access the network/internet?

Wireless problems - details
Hello Chef Tony,
here are details:
go to Windows-Settings-WiFiMGR-Advanced and Status is "Wireless LAN OFF".
go to Windows-Settings-Connections-Wireless Managers shows Wireless ON.
go to Windows-Settings-Connections-WiFi: "Turn on Wi-Fi" is selected go to Advanced
see my SSID name, tap on it, verify name (next), authentication is "WPA-PSK", data encrytion is TKIP, password is ok (next) everything is grey, (finish)
WiFi say my SSID is unavailable, tap on Connect, never connects.
Go to IE, cannot connect to any site which is normal.
It never show to me a list of available connetions, neither seem to connect to the one defined.
thanks for your help

j0rg3 said:
Hello, I've also flashed my blue angel with WM6.5.5_23529_eng and wireless do not work neither, while is was working with W2003 before flashing (so no hardware problem). Please note that same settings work with other 2 angels: w2003 & w6.1 and router is at home. Settings are:
infrastructure
wpa-psk
tkip
key is 26 chars alpha
These settings also work with a laptop and a netbook.
Do you have an idea to solve this?
Thanks for all your help
Click to expand...
Click to collapse
If you turn on wifi, does it scan for networks? let me go a step back, did you hard reset after flashing?

hello egzthunder1,
here my answers:
If you turn on wifi, does it scan for networks? - No
let me go a step back, did you hard reset after flashing? - Yes
thanks
j0rg3

j0rg3 said:
hello egzthunder1,
here my answers:
If you turn on wifi, does it scan for networks? - No
let me go a step back, did you hard reset after flashing? - Yes
thanks
j0rg3
Click to expand...
Click to collapse
Explain (step by step) how you are turning wifi on (I have a feeling I know what the issue is)

ok, let me Explain (step by step) how do i turn wifi on:
go to Windows-Settings-Connections-Wireless Manager - it presents with Comm Manager and Wireless symbol is OFF, so I tap on it, it becomes ON.
now go to WiFi settings, "Turn on Wi-Fi" case is selected, tap on "Wireless Networks" and see my already defined network name which says "Unavailable".
Tap on this network, verify name is ok, on next screen authentication & encryption are ok, as well as password and then tap on Finish.
If I tap on Connect, my network seems to try connecting but it does not an the end.
Does it seem clear to you? I do not know what am i doing wrong, sorry.
thanx for your help

j0rg3 said:
ok, let me Explain (step by step) how do i turn wifi on:
go to Windows-Settings-Connections-Wireless Manager - it presents with Comm Manager and Wireless symbol is OFF, so I tap on it, it becomes ON.
now go to WiFi settings, "Turn on Wi-Fi" case is selected, tap on "Wireless Networks" and see my already defined network name which says "Unavailable".
Tap on this network, verify name is ok, on next screen authentication & encryption are ok, as well as password and then tap on Finish.
If I tap on Connect, my network seems to try connecting but it does not an the end.
Does it seem clear to you? I do not know what am i doing wrong, sorry.
thanx for your help
Click to expand...
Click to collapse
I knew that you were doing that After a soft or even a hard reset, you do not turn on wifi via CommMgr. When you are in CommMgr, you go into Wireless Settings directly and turn it on through there "Turn Wireless On" option, and you get out. This will enable the driver, you only have to do this once and then you can use CommMgr as usual. Try it out and good luck!

Problem is over
egzthunder1 said:
I knew that you were doing that After a soft or even a hard reset, you do not turn on wifi via CommMgr. When you are in CommMgr, you go into Wireless Settings directly and turn it on through there "Turn Wireless On" option, and you get out. This will enable the driver, you only have to do this once and then you can use CommMgr as usual. Try it out and good luck!
Click to expand...
Click to collapse
SUCCESS ! terrific, after a couple of minutes is working as you've said!
Thanks a lot for your (& chef's) help, I'll keep on testing/using this version.

j0rg3 said:
SUCCESS ! terrific, after a couple of minutes is working as you've said!
Thanks a lot for your (& chef's) help, I'll keep on testing/using this version.
Click to expand...
Click to collapse
Glad it worked

WIFI not work X8 - ?ROUTER settings? !

Hi guys!
I have problem,that my wifi won't work. It's connected but there's no internet connection. If I change security, i get wifi connection but after few minutes,I lost internet connection but wifi is connected. Same problem on my father HTC WILDFIRE S.
On my laptop wifi works well.
I search on web and there are some people having that trouble,but I didn't find solution. I don't want to use static ip,because I lost router connection,I must use DINAMIC IP for working router.
My router adress is 192.168.2.1
Help me what settings I must to set,change in my router settings. I attach photos from broadband router what settings I have set! Please attach your settings that I can set this on my router. I wan't my normal wifi back.
Thank you all!

Fix
Hey there 2010matej.
What router are you using? I have had similar problems that I fixed. Also, some friendly advice would be taking your internet IP off the thread. It can be useful for some people with less favorable intentions.
Also, I'm not sure if it is XPERIA X8 specific.
EDIT: Have you paid this month for internet?

Deftone said:
Hey there 2010matej.
What router are you using? I have had similar problems that I fixed. Also, some friendly advice would be taking your internet IP off the thread. It can be useful for some people with less favorable intentions.
Also, I'm not sure if it is XPERIA X8 specific.
EDIT: Have you paid this month for internet?
Click to expand...
Click to collapse
Router: Canon CN WF514:
I have this problem for so time. Yes we always paid for internet!

Ok. I have asked a friend of mine he said that there are a few ways to deal with this problem:
1) A hard reset. Just use a pencil or pen to press the reset button. Hold it there for 4 seconds and the rooter will reset. This will make you start as if from the beginning.
2) Check for any 'broadcast' settings. Enable any that have been disabled.
3) Disconnect any wires and power plugs then clean them and reconnect them.
I'm sorry if this does not work. I have tried quite hard to help but unfortunately this is all I got. My friend also gave me the link to this manual just in case.
http://www1.canyon-tech.com/files/Canyon/Networking/WiFi_U/CN-WF514/CN-WF514_manual.pdf
Hope it helps

Thanks for reply. I hard reset router last because I can't go to 192.168.2.1 router web page,but when I reset wifi start working. I just again set security. Maybe is problem in security,but wifi is SLOW

2010matej said:
Thanks for reply. I hard reset router last because I can't go to 192.168.2.1 router web page,but when I reset wifi start working. I just again set security. Maybe is problem in security,but wifi is SLOW
Click to expand...
Click to collapse
Internet is slow at night so maybe this is the problem. Otherwise, try changing your channel. You may get better results. Go to speedtest.net and test your speed. Then come back. Also, connect the wire from router to laptop and it will be faster.
Hit the thanks if I helped anywhere.

Deftone said:
Internet is slow at night so maybe this is the problem. Otherwise, try changing your channel. You may get better results. Go to speedtest.net and test your speed. Then come back. Also, connect the wire from router to laptop and it will be faster.
Hit the thanks if I helped anywhere.
Click to expand...
Click to collapse
It's not that. Wifi on laptop is fast,just on x8 is slow. When I go on weekend to Croatia,where is internet very,very,very slow on laptop,is fast on x8,WTF!

Good to hear you fixed it anyway.

Deftone said:
Good to hear you fixed it anyway.
Click to expand...
Click to collapse
I didn't fix it . Fast on laptop,slow on x8 or no connection!

i think your problem is based on PPPOE connection type.
thing you do is you connect to your wifi but not to your operator.
THINGS YOU HAVE TO DO:
->go to http://www.torrapk.com/download/apps/WIFIPPPOE_v1.0/WIFIPPPOE_v1.0.php and download wifi pppoe apk
->install (root is needed).
->NOW connect to your wifi as usual.now when icon is displayed open the pppoe apk and insert your opereators username and pasword.(probably same as on your computer/laptop)
and DONE
glad to help

Lukenda said:
i think your problem is based on PPPOE connection type.
thing you do is you connect to your wifi but not to your operator.
THINGS YOU HAVE TO DO:
->go to http://www.torrapk.com/download/apps/WIFIPPPOE_v1.0/WIFIPPPOE_v1.0.php and download wifi pppoe apk
->install (root is needed).
->NOW connect to your wifi as usual.now when icon is displayed open the pppoe apk and insert your opereators username and pasword.(probably same as on your computer/laptop)
and DONE
glad to help
Click to expand...
Click to collapse
I don't think that is needed at all.. Some routers are really cr*p when WPA2 encryption is used..
I'd try setting it to WEP and trying again.. If it's better, then proceed to MAC allow your devices so your network is secured.
Set the wireless channel to 11 for a strong signal too.
Then in advanced wireless settings on your x8 make sure that NEVER is selected as the sleep policy.
Remove your router in your x8 wireless settings and then set it up again..
Good luck!

Sorry I was under the impression that it wasn't working before at all and now it is. Will read further in future but I have to say that I can't refute or build on lukenda's advice.

I hard reset router again,I didn't set security,but wifi won't work on phone. I don't want to install apps to have working wifi,because I didn't have problems 2 months ago ! And my channel is set to 11!

Lukenda said:
how do you know?
been in this situation?
i have.
i am almost 99% sure the problem is going to be solved by my way.
we are in the same region.
slovenia-croatia.
Click to expand...
Click to collapse
Calm down man. No need to oppress. Great you have experience. Fine. You submitted your advice now just wait for a thanks or further problems. No need to start hate. I thought your advice was great.

2010matej said:
I hard reset router again,I didn't set security,but wifi won't work on phone. I don't want to install apps to have working wifi,because I didn't have problems 2 months ago ! And my channel is set to 11!
Click to expand...
Click to collapse
it is only one app and i use it too.
try.
if it is not working check your wieres on router.

2010matej said:
Man what settings you have in your router? Send me photo,you can PM me! I don't want install apps,I want to get back same settings when my wifi works like a charm! I reset settings,router,nothing help ! I don't have PPPOE! I have dynamic ip,on other settings I can't open router page!
Click to expand...
Click to collapse
are you able to connect using your computer or laptop?
show me screnshoot of conect-to.exe

Lukenda said:
are you able to connect using your computer or laptop?
show me screnshoot of conect-to.exe
Click to expand...
Click to collapse
Yes I'm connected on PC and on Laptop,screenshoots is attached on first post!

2010matej said:
Yes I'm connected on PC and on Laptop,screenshoots is attached on first post!
Click to expand...
Click to collapse
kinda dissapointed,not pppoe..-
okey.
try to set static ip from your android.-
go to wirelles ,wifi settings,advanced,and add static ip.(your own) =)

Lukenda said:
kinda dissapointed,not pppoe..-
okey.
try to set static ip from your android.-
go to wirelles ,wifi settings,advanced,and add static ip.(your own) =)
Click to expand...
Click to collapse
Like I'm saying,just if i set dynamic ip my wifi works. If I set static ip,PPPOE,... I can't open 192.168.2.1 anymore or I just don't have connection not on phone not on laptop,pc!
What to set in PPPOE? I'll try to set pppoe tommorow!
THX for helping brate!

well use your usename and password as on computer (if u have one)
-razumijes hrvatski?