Database Develop

spv m3000 stuck at 98% with rom

Great my wizzard is stuck
its on 98% then de blue/green bar on my phone turned red en stays that way it doesnt do anything anymore, after a while my computer says the installation is finished, (SOMETIMES i get an error that has something to do with memory on my computer. or it says usb connection got lost or something)
i can reboot my phone but its going straight in the boot menu with those collors, i can try the downgrade rom again but it keeps getting stuck at 98%
anywone some suggestions?
I tried to install the folowing: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
becose i wanted to unlock my phone (dont know if its locked or not)
I tried a few other roms but they wont install at all
I forgot some info:
ipl/spl 2.18 so i have/ (HAD) a G3
gsm 01.04.10
os 2.18.1.3
it is an orange m3000 (i have a t-mobile simcard)
im using my sim in another phone do i need the simcard in the m3000 ?
well a few minutes later:
i put my simcard in my phone, but it still hangs
i tried in now on 2 computers but both are stuck at 98%
on my second pc i get the message ERROR [302] : UPDATE ERROR
The ROM update Utility has encountered communication errors during the update process. The program will guide you stem-by-step to recover from te errors so you can continue with the update.
2 choices to click: View Document or Recovery
lol i did the Recovery it made me put out the battery and reboot the phone en replug the cables
well ill try again then... :|
did it about 8 times now, keep getting stuck at 98% notice that the bar becomes red at 98%
anywone please any suggestions? im afraid i bricked my phone

There are 24 people who look at this topic and nowone has a clue what i need to do???

kaasaanfiets said:
I tried to install the folowing: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
becose i wanted to unlock my phone (dont know if its locked or not)
I tried a few other roms but they wont install at all
I forgot some info:
ipl/spl 2.18 so i have/ (HAD) a G3
gsm 01.04.10
os 2.18.1.3
it is an orange m3000 (i have a t-mobile simcard)
im using my sim in another phone do i need the simcard in the m3000 ?
Click to expand...
Click to collapse
is a 1.04.10 radio a valid radio for a 2.xx rom?
If you are stuck, the only/best way to recover is to flash an official rom from your carrier. You can get to the bootloader so you are NOT bricked. You are just flashing roms that have a CID that doesn't match your phones. Try the button rom or the wizard love rom that the unlocking stickies mention repeatedly.
Were your IPL/SPL 2.18 before you started?
Read the Wiki, Read the stickies. For every person that says the process doesn't work there are 100 that it works flawlessly for and 99% of the time those that can't get it to work don't follow all the steps in order or just outright skipped steps or substituted with what THEY thought was better. There is a reason for each and every step in the guides. IF you follow them properly you WILL NOT have any issues.
For the situation you are in now: STOP trying to flash custom roms, you MUST get your phone back to a usable state before you go down that path again. Use your carriers latest available rom to recover your device.
Also you are lucky to get an answer at all because your question is asked in almost every single new thread and every single ROM thread. The answers are already easily found if you take the time to look yourself.

thanks man, i tried the original orange rom and it worked.
RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe
im so happy, thank you for all your helpful comments
2.18 before i flased is yes.
i wanted to copy a new rom to my device, but i thought it was cid locked.
so i followed step by step the guide from faria
http://forum.xda-developers.com/showthread.php?t=263116&highlight=stuck+at+98%
but i think the problem was that i did not have an aku2 or whatever that means.
Im sorry if im being rude, but you people do a wonderful job on those roms and step by step guide's but u forget that there are people that have no clue what aku2 means when i google is, it says a new rom from t-mobile with wm5 but it doenst say how somewone can check for themselfs if they have an aku2 rom...
Im verry sorry for those noob questions but it look like a heva the same rom that i had before i messed it all up.
so can i install a new rom from here? like one of these?
Pro Black 3[1].0.1.exe
CB-AIRAF.exe
?

kaasaanfiets said:
thanks man, i tried the original orange rom and it worked.
RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe
im so happy, thank you for all your helpful comments
2.18 before i flased is yes.
i wanted to copy a new rom to my device, but i thought it was cid locked.
so i followed step by step the guide from faria
http://forum.xda-developers.com/showthread.php?t=263116&highlight=stuck+at+98%
but i think the problem was that i did not have an aku2 or whatever that means.
Im sorry if im being rude, but you people do a wonderful job on those roms and step by step guide's but u forget that there are people that have no clue what aku2 means when i google is, it says a new rom from t-mobile with wm5 but it doenst say how somewone can check for themselfs if they have an aku2 rom...
Im verry sorry for those noob questions but it look like a heva the same rom that i had before i messed it all up.
so can i install a new rom from here? like one of these?
Pro Black 3[1].0.1.exe
CB-AIRAF.exe
?
Click to expand...
Click to collapse
You will not be able to install a CUSTOM rom until you CID unlock. I don't believe the Black 3.0 rom is available for the Wizard. It is a Hermes rom. There are several WM 6 roms available for the wizard, you should probably look in the WM6 sub-thread once you get yourself completely CID unlocked.
The tutorial tells you everything you need to know, even if you don't know anything about anything. Just read the instructions follow the links to download the roms/tools that it is talking about. If you don't understand the instructions you can post in that thread and the authors or others will help you there. Though they most likely will not respond until you show that you have read and at least have an idea of what you are trying to do, where you started where you are and where you would like to end up. If you don't understand the instructions there is always the IMEI unlockers site that will give you a utility to do it if you want to pay them for it.
Why are you trying to upgrade? Do you need to upgrade? Are you willing to void your warranty on your phone? Can you live without it if something drastic happens and you truly do brick your device, in most cases you will not be able to exchange your phone under warranty? If you haven't defined the first question or answered no to any or all of the other questions you shouldn't be rom flashing, especially not with unapproved roms that aren't supported by your carrier. You need to measure the potential gains against the risk of doing these things to determine if it is right for you. Once you get unlocked and flash a couple of roms you will see that it is easy and relatively safe as long as you read and follow the instructions they are tried and true and do work if they are followed properly.
I would suggest using this thread to unlock your device: http://forum.xda-developers.com/showthread.php?t=285435

Zzan said:
You will not be able to install a CUSTOM rom until you CID unlock. I don't believe the Black 3.0 rom is available for the Wizard. It is a Hermes rom. There are several WM 6 roms available for the wizard, you should probably look in the WM6 sub-thread once you get yourself completely CID unlocked.
The tutorial tells you everything you need to know, even if you don't know anything about anything. Just read the instructions follow the links to download the roms/tools that it is talking about. If you don't understand the instructions you can post in that thread and the authors or others will help you there. Though they most likely will not respond until you show that you have read and at least have an idea of what you are trying to do, where you started where you are and where you would like to end up. If you don't understand the instructions there is always the IMEI unlockers site that will give you a utility to do it if you want to pay them for it.
Why are you trying to upgrade? Do you need to upgrade? Are you willing to void your warranty on your phone? Can you live without it if something drastic happens and you truly do brick your device, in most cases you will not be able to exchange your phone under warranty? If you haven't defined the first question or answered no to any or all of the other questions you shouldn't be rom flashing, especially not with unapproved roms that aren't supported by your carrier. You need to measure the potential gains against the risk of doing these things to determine if it is right for you. Once you get unlocked and flash a couple of roms you will see that it is easy and relatively safe as long as you read and follow the instructions they are tried and true and do work if they are followed properly.
I would suggest using this thread to unlock your device: http://forum.xda-developers.com/showthread.php?t=285435
Click to expand...
Click to collapse
I bought my phone second hand (i dont have a receet of something) so i dont have any warranty anymore
i like my phone but i have troubles with sms the recever keeps getting old of no messages so that why a want another rom
i would be a shame if i brick it, but im willing to try
im doing the steps from your link now, ik istalling te rom at the second point but it still is stuck on 98% :|
is there another 1.5 rom? that i can try? i read someting about the love rom

kaasaanfiets said:
I bought my phone second hand (i dont have a receet of something) so i dont have any warranty anymore
i like my phone but i have troubles with sms the recever keeps getting old of no messages so that why a want another rom
i would be a shame if i brick it, but im willing to try
im doing the steps from your link now, ik istalling te rom at the second point but it still is stuck on 98% :|
is there another 1.5 rom? that i can try? i read someting about the love rom
Click to expand...
Click to collapse
The Wizard Love rom is another that people use when the Button rom doesn't work for them. I don't have a link to it but I am sure it is linked in the Upgrading or G4 sub-forums. Maybe even in the Wiki. Sorry haven't been spending much time in the Wizard forums as I only flash my wizard when something breaks, or a new feature is added -- My wife uses that phone now .
There is always the pay to unlock website but you should be able to get it unlocked with either button or the wizard love rom.
Just out of curiosity how long do leave it sitting at 98% before you determine that it is stuck? All roms "stick" at a few points during the flashing process. If you didn't wait at least 5 minutes or get an error on your PC you probably didn't wait long enough. Best advice I have on this is disable all power management/screen savers on your PC set up the flash. Once it starts leave the room and close the door for no less than 30 minutes. This way you can be sure that you didn't interrupt it. For a Wizard the flash should complete in 10 minutes or less. For the Hermes it can take a full 30 minutes depending on your flashing method an which components you are flashing. It is normal to hang for a few minutes at different points during the flash process, just because there is no transfer doesn't mean something isn't being decompressed/written on the device from what has already been transferred over.

Zzan said:
The Wizard Love rom is another that people use when the Button rom doesn't work for them. I don't have a link to it but I am sure it is linked in the Upgrading or G4 sub-forums. Maybe even in the Wiki. Sorry haven't been spending much time in the Wizard forums as I only flash my wizard when something breaks, or a new feature is added -- My wife uses that phone now .
There is always the pay to unlock website but you should be able to get it unlocked with either button or the wizard love rom.
Just out of curiosity how long do leave it sitting at 98% before you determine that it is stuck? All roms "stick" at a few points during the flashing process. If you didn't wait at least 5 minutes or get an error on your PC you probably didn't wait long enough. Best advice I have on this is disable all power management/screen savers on your PC set up the flash. Once it starts leave the room and close the door for no less than 30 minutes. This way you can be sure that you didn't interrupt it. For a Wizard the flash should complete in 10 minutes or less. For the Hermes it can take a full 30 minutes depending on your flashing method an which components you are flashing. It is normal to hang for a few minutes at different points during the flash process, just because there is no transfer doesn't mean something isn't being decompressed/written on the device from what has already been transferred over.
Click to expand...
Click to collapse
Yes well i waited the first time for like 15 minutes then my computer shut down the update programm
today i waited like 30 minutes cos i even had dinner.
Well ill try the love rom some other time cos i need my phone to work sunday becose i need tomtom
thank you for your information i appreciate it verry much
i noticed that the original rom that does work: RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe that one, also flashes red and green while installing so i guess thats normal...

Scared to post but I am stuck must take your wrath

Aloha everyone,
I have tried to not post for about 3 weeks but I just can't move forward. I have read and tried to follow everything on the site but I am just confused. I know this is a developers site and I am very intimiated to be castigated by you guys but...it's the internet so what the hell.
I have found numberous instruction threads pertaining to updating ROMS on the Wizard. It seems that up until recently there was only one way to do things but now there are many. As I try to answer questions I come into conflict over which way I shoudl be heading.
I currently have a working WIZ100 that boots with IPL 2.21.0001 SPL 2.21.0lip with GSM 2.25.11 and OS 2.25.11.1. I somehow got to this point, I think by following the instructions to get hardSPL on my device and booting on startup. I did not know if I next needed to find a ROM and if so then how to get that ROM activated on my device or what programs to do this with. I know that the threads spell it out but the threads pertain only to direct assumptions; the assumption that my head is not in my ass.
I wanted to attempt to put a new rom on here, for fun and to play around with something new. Perhaps increase reliability or to get WM6 going. I am stuck now though. Part of me wants to turn back and load the original ROM from the HTC site and the other part of me wants to try a new ROM as I already have this thing booting to the 0lip SPL.
Is anyone out there willing to help me either via this thread, personal message or IM?

Since you have already installed Hard SPL you should be safe to go ahead and pick virtually any ROM you choose on there. I don't have a lot of experience with Hard SPL yet, except for installing it on my kaiser, but the one thing I would guess that you should make sure that the ROM you want to flash doesn't have would be an IPL/SPL update included. As far as I know, I don't think any of the public ones that you find on here have them but make sure you read the chef of the ROM's entire post to make sure. And, if you magically happen to find my ROM somewhere, which you shouldn't since I only gave it to 2 people to try, don't flash it because mine does include an IPL/SPL update.

From my best understanding you have already loaded HardSPL and now are CID unlocked. If this is the case then I would recommend going forward and flashing a new rom to your device. Just go to the Wizard Mobile 6 thread and find one you like, and flash it.
Simple as that.

I appreciate your replies.
1) I am clarified like butter! What program do I download and use to flash the ROM to the Wiz, this has been a source of confusion for me.
2) If I download and install the HTC Cingular ROM from HTC, will that overwrite the HardSPL and return my phone to Factory Default, including the radio areas? In other words do I rid myself of 2.21.0lip?
Thanks for not beating my head in...very polite you devs are...

I like beating people's heads in, and you are far too polite, that I am actually having a very slight guilty twinge! Damn you. I have a G3 myself so I cannot help much, however, I found this sticky which may help.
http://forum.xda-developers.com/showthread.php?t=332320
I do know that once you choose your rom, you open the folder and run the item marked as ruu.
Now if you only had a G3, then I could fry you like the noob you are.
I suppose at some point, I should make a point of reading/learning about G4's. I know they are a far different animal from my G3.

That's the reason I said not to flash a ROM that contained an IPL/SPL upgrade since there is the possibility that it may overwrite Hard SPL, although I'm not positive of that, but better safe than sorry especially if it it's not an official ROM that carries the correct IPL/SPL format for a G4. If it doesn't contain the correct format for a G4 it could ruin your phone. If you flash an official ROM though and it overwrites it you can always just reinstall Hard SPL again and keep flashing. I hope this makes sense.
As for the files you need to flash a new ROM, they're usually included with the ROM. If they're not then just let me know and I'll upload them for you.

Good that you asked before damaging your (expensive) device...
Every Flash version comes with a RUU (Rom Update Utility) you just run that proggy and it does the rest.
To make it easier, look for a rom that states it's G4 safe (no IPL/SPL included), so you don't have to mess around with the inner files. If you want to, begin your tests with the TNT series, the latest build, stated in my sig is G4 safe, after that you'll be able to know the initial procedure.
Good Luck.

Thanks for the info.
Do I execute the ruu from Windows XP or from the SD card ont he device?
Why am I have a hard time searching for and finding TNT 5.2.1921 TouchFlo ROM?

The rom update utlity gives me an error when I try to update. Should I try to do all this from the sd card?

Well, I am plugging along. I rebooted after an error 300 came up on the rom utility. Any suggestions for me?

I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?

If you have ROM on your desktop, Connect your phone to your computer via USB, open up Activesync, uncheck the check box in settings that allows USB connections. Make sure you have at least 50% battery, then put your phone into bootloader mode. (soft reset while holding down the camera button- keep holding the button for 5 sec.) a tri-color RGB screen should come up. This is boot loader mode. Then run the rom update utility program, and everything is automatic from there on. once it is done flashing the phone will restart itself.

Thresher said:
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
Click to expand...
Click to collapse
Try it and find out. I'd kind of like to know the answer to that one too, although my phones a G3 and already CID unlocked anyway. You can always reinstall Hard SPL over again if it does.

So this worked out well for me overall. Installing HardSPL to my G4, and then using a correct bootloader with the right ROM (to review).
I am having one issue.
I have the OEM ROM, however the RUU gives me an error. Is there a documented way to restore the phone to an original status? Is it even necessary?
I ask due to problems since my upgrade to the TNT rom. I am noticing a lot of missed calls and people have complained. Is this an issue with the 8125 and the particular ROM?
I don't know what to ask, or how to search for this. Thanks for any input you can offer.
Otherwise the TNT rom is awesome. I do miss the voice dialing though. Thats another search.

Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.

xeno1 said:
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
Click to expand...
Click to collapse
So the Rom is broken up into major parts. Those parts must ineract with one another, so that would be why my radio version may be at cause?

Yep. The ROM can contain the IPL, SPL, OS, Splash Screens, GSM (the radio), and extended ROM, any of which can be changed or upgraded individually without affecting the other parts of the ROM (for all intents and purposes anyway). That means you can change your radio version without it deleting all of your settings or your installed apps in your OS, etc etc.
Since you still upgrade each individual part using a RUU that is able to update any of the parts you still get a warning when you run it that it will delete all of your files, but as long as the update that you're running doesn't include a new OS you can ignore those warnings.

I decided to back out of the entire upgrade and move back to WM5 Official Cingular HTC ROM. I am stoked that I now know the full process of taking a G4 through hardSPL, ROM updates and restoral.
I was too scared to try any radio updates or fixes. Maybe when I upgrade phones I will come back to playing with the 8125 but for now, I just need a good functioning phone for work.
Do these Cingular radio fix cabs apply to a standard phone or only to upgraded ones?

Flashing WM6.1 to a new Herald

Hey there,
since I'm new to the community I hope I'm not doing it wrong
I will receive my new Herald within the next days and now I'm seeking for all the stuff I will need then.
1. Hard-Spl. I don't get it. What is it? Is it some kind of firmware update or whatever? The ROM's thread says that I would need SPL 4 or later to successfully finish the Update but I can't find that SPL application in version 4+ :/
2. http://forum.xda-developers.com/showthread.php?t=437385 - http://www.evolvers.net/Herald_Roms/Version 7.7/ => I'd like to use that ROM. But I'm not too sure whether to use Manilla2D or Omnia.
3. What if I needed to send my device back for warranty reasons. Is there some way to flash back the standard Win Mobile 5.0?
I hope I will get your attention!
Regards,
Chris

Hey there,
A friend of mine just told me about flashing ROMs literally a few days ago. I did my first successful flash just yesterday and I am very happy that I did. FYI, yes I am using a stock TMobile Wing from 2007.
Rom's are not interchangeable across different phone models as far as I know. So you need to get ROMs made for the wing a.k.a. the Herald. Any Rom for the Herald should work.
Just remember one thing that I forgot to do, make sure that you back up your data. I forgot to do this and lost all of my data. Luckily, I did not have any pictures or music that I was too sad to lose. However, I did lose my contacts. Again luckily, I had an old Sim card from last year that had my contacts on it, so I was able to get back 90% of my phonebook, except for a few people that changed numbers or new contacts. So be sure to save anything you want to keep somewhere else.
I am pretty technically savvy, but I must say that flashing the Rom did take me several hours. The process itself only takes about 10 minutes, but it took hours to figure out what type of Rom I needed and how to exactly flash it. You will see many people trying to tell you that you need to know your IPL and SPL version, and there is no way to know this until you start flashing! It wasn't until I did my first accidental flash that it showed me this information, and this ended up being my first successful flash. After trying for several hours the night before and not succeeding, I guess that's why it slipped my mind that flashing successfully would erase all my data.
The one that actually worked for me was the Canonyang Rom. In the link below please look at post number 216, and you will see a link to download the ROM that worked for me. The file is "HardSpl_WM6".
http://forum.xda-developers.com/showthread.php?t=332413&page=22
I tried to flash directly to open touch, and no matter what I tried it was not successful. When I accidentally tried this Canonyang flash it worked successfully the first time, and after that now I was able to flash to any other Rom.
I am currently running open touch light version 6.5 because I read in another thread that it's supposed to be the fastest. I don't need a lot of features so I'm happy with what it has, and it is much, much faster than the stock T-Mobile Rom.
Since you are now getting it, yes, warranty is an issue for you. I am very new to all this, but from what I gather, once you flash, it does void the warranty. Perhaps someone else can answer if there is a stock TMobile rom, that you can flash back to. However, since the roms are digitally signed, I'm not sure that by even doing that, if TMobile can tell you modded it, and therefore elect not to honor your warranty. I guess that's a risk you have to decide if it's worth it or not. IMHO, I found out about rom flashing this week, and my warranty was up last month. However, if I had found out about this during my warranty period, I would have still done it. The Tmobile stock rom is sooo slow, compared to these roms. If you've never used these roms, you'd think like hey, it's got some bugs, but it's not that bad. But if you've used them, you're never going back to stock rom again.
I apologize if there are any typos, as I am using voice to text recognition software that I am testing. I thought I'd help you out by writing this as well as I test it. Good luck and let us know if you have any questions, we're all here to help.

Hey,
thanks for all the information. Was very helpful. I decided to you the ROM from that link. Should work, shouldn't it?
The only thing I don't get is how to get to SPL4+ :/ I heared of different methods of SPLing. Like Hard SPL and USPL. Can you bring light into that cave?
Cheers.

Hey there,
Your link goes to the Open Touch thread. The link I'm referring to, is this one:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
As I said, I was NOT able to flash directly from stock to OTP. I tried many methods, and Canonyang was the only one that worked for me. After I successfully flashed to CY, then I was able to flash to OTP without issue. But in theory yes, any Herald rom's should work fine.
In regards to IPL/SPL, my wing is from September 2007, and I had IPL/SPL both above 4. I had NO WAY to verify this before flashing. When I initiated the flash for CY, and the wing rebooted, it was THEN I saw my IPL/SPL versions. I'm sure yours will be at least v4.
Actually as I write this to you, I remember a critical step I forgot to tell you. You need to Application Unlock your device as well. This is probably what I was missing in my failed attempts. After I did that, then the CY flash worked. I got that information, from this link:
http://forum.xda-developers.com/showthread.php?t=356295
So I would suggest following the steps there first, then trying the link earlier to flash to CY, then flash to anything else. This is the procedure that worked for me. Good luck!

Hey there and thanks again for that bunch of information
itbmd said:
I'm sure yours will be at least v4.
Click to expand...
Click to collapse
What does that mean then? I do not have to HardSPL my phone? But still, would you mind telling my step by step (And I really mean step by step^^) how to HardSPL a device? I really do not want to brick my phone directly at the beginning.
Oh and what should I rather be using, SoftSPL or HardSPL?
Cheers.

Hey there,
Sorry but I just flashed my device less than a week ago as I mentioned. I don't have many of the answers you ask, because I'm asking them myself. I don't know the diff between Hard vs. Soft SPL.
The file I linked you to earlier, is a hardspl, as denoted by its filename "HardSpl_WM6". It hardspl flashes to the canonyang rom. It was then I saw the IPL/SPL versions, and then was able to flash to other roms.
FYI, I was concerned about bricking my device as well. But during the roughly 5 hours I was trying to flash it correctly, every time the flash failed, it did NOT brick. It just errored on the pc, and the Wing itself just restarted and went back to the stock TMobile rom. It never actually bricked. Make sure you do the application unlock though; I think that's a step that people may not do and could cause it to brick. Good luck.

Recovering a harrier device

Ok, so I tried installing the WM6 rom on my device without knowing it was in fact a Harrier and not a Blue Angel. I now realize I was very stupid in doing this. Now when it boots I get the stripes on the screen and "No GSM, D 5.60.00 WWE" written in the bottom right corner of the screen.
Does any one have an original Harrier rom they could upload so I can flash it back to the original WM2003?
If no one has that, is there a way to copy the rom from another, identical device?

xplode has a great firmware archive, where you can find about any original shipped rom, for the harrier, you find it here: http://firmware.atspace.com/Harrier.html

Thanks Chef_Tony. Thats got it working again perfectly.

i have the same problem it now says no gsm ....
what software do i need to make it work again ?
thx
andy

gripperwod said:
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
Click to expand...
Click to collapse
Hit the link that Chef Andy listed, find your carrier in that list and download the latest one available

what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
thanks
andy

gripperwod said:
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
Click to expand...
Click to collapse
Again, find your carrier (I'm assuming that the phone was running the official ROM that it shipped with for your carrier) in that list and download the latest one available. No one can tell you which one to download as no one else but you knows who your carrier is.
The radio version doesn't matter in this situation as the OS is coded to deal with a CDMA radio stack, and most, if not all, official ROM flashers will flash the radio stack with the OS. You are going to have to flash it back to whatever OS and build (usually WM2003 for the Harrier) is provided in the archive. If there are multiple versions of the ROM/radio available, generally the newer ones are the better ones.
You shouldn't need anything special for this as you will be flashing the official ROM for the phone. Download, run the executable and follow the on screen instructions.

ok ive downloaded all from these links and it tells me each flash ..
the rom image is not designed for your device . error code is wrong country code !!
i tried simunlock and now have no gsm showing in boot .
it was on uk orange network the phone is spv m2000
thx

well, your device is a blueangel, this thread is about the harrier. it deals with people trying to recover their CDMA devices after a bad flash, you have a GSM device, a completely different phone, and also, the source of your problem is not the same. thank god, the flash did not work, or your phone would be bricked for good.
you need to do a completely different procedure:
1. you go to xplode's BLUEANGEL firmware archive at http://firmware.atspace.com/Blueangel.html and download any rom in your language / from your country. then you put your device into bootloader mode and flash the device using maupgradeut_noid, found here: http://rapidshare.com/files/322928773/Chef_Tony_RUU.zip
2. then, when you have wm2003 back, please post back for further steps to go.

thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.

ok downloaded the orange uk but its file is corrupt so executable failed ...
looks like im not going to win ..
tried other orange uk files further down the list but still says country error code.

yes, the country id error is the reason, why you need to extract the 40mb exe file, put maupgrade in there, from the link i provided earlier, another thing to avoid the country id error, is to put the device into bootloader mode before starting the upgrade process, so, before you put the blueangel into the cradle, you press record+power+reset, until the display shows "Serial" and "V2.0x" where x is a number from 5 to 7, then you connect the device and start maupgradeut_noid.exe, which has to be in the same folder as the nk.nbf and all the other needed files. using the maupgrade instead of the BAupgrade and using the bootloader mode avoids nearly all the errors, like country id, device id and so on.
EDIT: btw. i am not a chef, i am a system administrator, the avatar and username are just my regular online name, named after the most ridiculous chef on american tv ^^

gripperwod said:
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
Click to expand...
Click to collapse
Tony is right, your phone would have been bricked.
For future reference, when you post, make sure to list your carrier and the exact model of phone. Anyone in these forums needs this info to attempt to offer the correct information to help.
In my posts, as Tony mentioned, this thread was dealing with Harriers, the CDMA version of the Blue Angel. When you jumped in, I thought that you were talking about a Harrier as well.
Keep in mind that each phone has it's specific ROM designed for that single model of phone alone, they are not interchangeable.

hi
after long time thought i might have another go ...
all the links you have supplied dont work eg: file is corrupt is the message im getting when trying to install software to pc.
i need the factory cd rom for the : orange spv m2000
i have no gsm on the phone since i upgraded the phone to wm6.5
ce os 5.2.21169 (build 21169.5.0.0)
please help
thx

Problem with HTC Kaiser Tytn II - please help...

So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...

To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.

hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.

Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!

Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel

hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.

Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.

Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel

cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?

-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...