HELP in Upgrading, my BA cannot be detected - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi guys. I'm really new to BA upgrading. I have purchased an O2 XDA IIs thru Ebay and would want to upgrade it from its current WM 6.1 to WM 6.5 OS.
The problem is, I cannot sync thru Activesync, everytime I insert my device thru its USB cable it says "USB Device not recognized".
I also have an O2 XDA II and it does not have any problem syncing.
I have already tried every USB port of my PC and all displayed the same situations.
I'm using Activesync 4.5 and I have tried upgrading it and since its not even "recognized" in the end the upgrade tool would say "The ROM upgrade kit is not designed for my device".
I can put it in Bootloader Mode and it says "USB" mode everytime I connect the data cable to my PC.
Another problem I think is that I cannot do a HARD RESET. I mean I can put it in HARD RESET Mode where it asks me to choose YES or NO on 3 options, somehow, I cannot go beyond that. I dont know which button to press to activate the reset. I mean, I tried every button but no hard reset happens.
Guys I know you can help me on this. I think I'm gonna need your "divine influences" on this matter. Cheers.

if you are running vista OS or above, please refer to the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
to perform a hard reset
1. hold down power button + press soft-reset
2. immediately, hold down Power + Record + Camera buttons
3. Option 1 - No, 2 - Yes, 3 - Yes
4. Press Mail button
PS: please take out the SD card when during the flashing process.

Related

HELP!!! Urgent!

Hello. I am in desperate need of help. I left my blueangel charging in the craddle last night only to find it this morning with a blank screen. After trying to soft and hard reset it without any success all it shows is the blue imate startup screen and the software versions in the bottom right hand corner of the screen. I would appreciate any advice on the matter.
sounds like rom problems
first try remove battery for couple of minutes
also remove sdcard (if any inserted)
replace battery and reset device
if this won't help
Only thing you can try is to update the rom
I would also appreciate the contact details for a service center in spain. I have an Imate PDA2K bought in the UAE.
Thank you vastloper, I have tried that several times but makes no difference. On top of everything else I cant update the ROM as ActiveSync will not recognise the device, basically it will not connect to any other device. Any clue?
You do not need activesync to upgdate your rom, you need latest rom no matter which provider or version, reflas and then connect via activesync
why would ROM become defective all of a sudden? makes no sense.
take out the main battery and leave it for a few hours, (or overnight), so that the backup battery drains.
Then reassemble the phone - it should perform a hard reset on its own.
If this doesn't work, u may have a hardware problem.
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix

HELP!!! Cannot enter 3 color Update mode any more !!!

Hi everybody
i use a
Orange SPV 3000 cid/sim unlocked
WM 6 NBD 7.3
IPL / SPL 2.26
GSM 02.25.11
OS 5.2.1413 (Build 17913.0.3.0)
Now i tried to go back to the latest German ROM Update provided by ORANGE CH.
(RUU_Prodigy_21611_2161111_010410_OR_CH_GER_Ship.exe)
The Update Process start's on the PC Screen and remains on 0% and will terminate with ERROR [260]: UPDATE ERROR
The Phone hangs and cannot enter in "3 color update mode".
I have to take out and reinsert the battery to bring the Wizard back to Work.
Then the Wizard start's up and you can work without any Problems. (Exept you have to set the Date / Time again it is set to 2006-02-14 12:00)
Next Steps
- did a Reboot on the PC and the Wizard -> Same Result
- tried to Flash NBD 7.3 ROM again -> Same Result
- did a Hard Reset (press the 3 Buttons on Reset then Send Button ) and tried to Flash again -> Same Result
- tried to manualy enter Update mode (press Camera Button on Reset) with the same Result the "3 color update mode" will not appear
Has anybody a Idea what else i can do?
Tnx in advance for any HELP
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
mdajunkie said:
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
Click to expand...
Click to collapse
dear mdajunkie
now i can enter bootloader mode manually
looks like i did not hold the camera button long enough before
thank you very mutch for your HELP
I assume the Problem is locatet on the PC and have to find out why i can't flash my Device again.
Recently i changed something on the PC - I installed a external BlueTooth-Dongle from MSI including the MSI BlueTooth Software
Starting now with the easyest step - reinstalling Active Sync 4.5 and try again.
Regards
Now everything works fine
I tried to Flash a ROM and it work's
i did not change anything exept entering the bootloader mode manually once.(no reinstall activesync or deinstall bt software !)
May be entering the Bootloader Mode manualy "cured" my PDA?
i don't know
Regard's
im glad you got it to work. Most important thing is to read make sure you know how to and are confident enough flash roms. Makes things a whole lot easier. Atleast that way if something goes wrong you will be able to backtrack a lot easier and maybe explain your situation a whole lot better. Hope everything else goes wonderful for you and have fun man.

Splash Screen Stuck Fix

Was asked to re-post in upgrading and wm6
I had my 8125 flash a bad rom and was stuck on splash screen.
fixed it with mtty1.42
connect in bootloader mode with usb
choose usb connection not com1, or com2
you will get a white screen press enter
then you see cmd>
type format will show you what you can format
you want to format the os part starts with a b cant remember exactly
once its formated flash a rom and you should be good to go if you have any questions just let me know.
I dont have the option for USB.. just COM1 and COM2
Please advise??
Have the same problem. I'm running Vista. Do I need XP to do this?
or, is it possible to flash via MiniSD?
Then you probably have active sync on turn if off and disable it so when you plug in the usb cable it doesnt automatically come up.
Sorry took so long to get back
I had the same problem when i've flashed the black diamond wm6.1 rom, but all i had to do is to turn the device into bl mode (camera key + power key) and then reflash it..
If that wont work for me again ill give your tip a try. thanks!

please help, my diamond won't boot up at all

Dear friends,
I was trying to flash my diamond with mtty, where i guess i messed up with commands, I formatted it, then tried to restart with "task 8" then my phone turned off and never on again no matter what i did or key pushed.
Any help will be much appreciated...
me too
but i don't know how to use Jtag recover BL for Diamond
Update ROM by using the BootLoader
Hello there,
even though you can't boot into your OS in the Diamond, there's a way to enter "BootLoader" mode. I'm not sure it works, but you can give it a try.
Here's how:
- Connect the Diamond to your PC
- Enter bootloader mode on your Diamond: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
- Use the ROM Update Utility. If the previous step worked and your connection is working, then with some luck you will be able to Flash the Device with the ROM update utility.
I've tried to find the thread that discussed this with pictures and such but couldn't. You might want to look for similar instructions
Good luck
Shane
JTAG
does anyone managed to JTAG diamond?

ROM Update issue

I tried to do a TASK29 and somehow in the folder there was no task29.exe, so i used the ROMUpdate utility ..and asked me if i wanted to upgrade to somewhat ROM 2.0.0 (?something?)..(i thought that was part of task29 job...) and now my device is blocked in HTC white splash screen...
hard reset still same issue does...
is there any ROM Update utility that can be used without starting the windows from the phone?
or..what can i do to connect my phone to the PC?
i managed to do 4-5 ROM Updates without problems during time, but somehow..this TASK29 job did not work.
is it possible that i deleted the Operating system from the phone?
bogdan_wrc said:
I tried to do a TASK29 and somehow in the folder there was no task29.exe, so i used the ROMUpdate utility ..and asked me if i wanted to upgrade to somewhat ROM 2.0.0 (?something?)..(i thought that was part of task29 job...) and now my device is blocked in HTC white splash screen...
hard reset still same issue does...
is there any ROM Update utility that can be used without starting the windows from the phone?
or..what can i do to connect my phone to the PC?
i managed to do 4-5 ROM Updates without problems during time, but somehow..this TASK29 job did not work.
is it possible that i deleted the Operating system from the phone?[/QUOTE
If am not mistaken, Task 29 did exactly what it should do which is wipe your device clean. Now what you have to do is enter bootloader by powering on your phone while holding the volume down button. If your phone is not off, do a soft reset by pressing the reset button on the side while holding down the volume down button. You should come to a tricolor screen and it will say "SERIAL" in the bottom. When you see this, plug in your USB and on the screen it should change from "SERIAL" to "USB". At this point open up your rom folder, click on the "Rom Update Utility" and follow the prompts and you should be all set. Hope it helps.
Click to expand...
Click to collapse
sorry. solution found
"if you fail to press vol down key and your phone get stuck on the white screen, just remove your battery, then try again: press power, and keep vol down pressed immediatly next, until the phone get to RVB bootloader.
When your phone is back to RVB bootloader screen, use the leocustomruu.exe provided with your favorite rom package to flash a new rom, or flash it from memory card using standard procedure."
you can close this thread.
marduk79 said:
bogdan_wrc said:
I tried to do a TASK29 and somehow in the folder there was no task29.exe, so i used the ROMUpdate utility ..and asked me if i wanted to upgrade to somewhat ROM 2.0.0 (?something?)..(i thought that was part of task29 job...) and now my device is blocked in HTC white splash screen...
hard reset still same issue does...
is there any ROM Update utility that can be used without starting the windows from the phone?
or..what can i do to connect my phone to the PC?
i managed to do 4-5 ROM Updates without problems during time, but somehow..this TASK29 job did not work.
is it possible that i deleted the Operating system from the phone?[/QUOTE
If am not mistaken, Task 29 did exactly what it should do which is wipe your device clean. Now what you have to do is enter bootloader by powering on your phone while holding the volume down button. If your phone is not off, do a soft reset by pressing the reset button on the side while holding down the volume down button. You should come to a tricolor screen and it will say "SERIAL" in the bottom. When you see this, plug in your USB and on the screen it should change from "SERIAL" to "USB". At this point open up your rom folder, click on the "Rom Update Utility" and follow the prompts and you should be all set. Hope it helps.
Click to expand...
Click to collapse
thank you. it did help
i re-red the post related tot task 29 and found the solution.
Click to expand...
Click to collapse

Categories

Resources