i forget it , very stupid.
but i use touch-it rom for two days it's not hang or anything.
n13oss said:
i forget it , very stupid.
but i use touch-it rom for two days it's not hang or anything.
Click to expand...
Click to collapse
That's weird
The hard-SPL let you flash custom roms on your device.
Maybe the hard-SPL is included in the Touch-it, not sure about that
As long you don't have problems, there's no reason to worry about
i didn't used it either, and didn't start with the touch rom, but another one.
And don't have any problems yet, can flash every rom
greatz
Patrick
there is no need to make a hard spl every time you flash a rom. The first hard spl you do will stay "forever" and allows you to flash as many custom roms as you want.
Dont forget to read the forums. There are a lot of helpful FAQs and threads around. Just do a search.
Woo Hoo !
i will buy pizza for all you guys !
last flash i forgot the hard spl, too. But instead of flashing the new rom my phone stays at the old one...
very strange ^^ reflash with hardspl helps
Kid_DC said:
last flash i forgot the hard spl, too. But instead of flashing the new rom my phone stays at the old one...
very strange ^^ reflash with hardspl helps
Click to expand...
Click to collapse
Yeah like someone said before
The Hard SPL stays
only if you have some problems you can reflash it with hard SPL again and with a custom roms, but if you don't have any probs, you don't have to do it anymore ;-)
I'm not sure if this is correct (correct me if i'm wrong), but if you flash your phone with an official rom/firmware, the hard-spl-thing will be gone.
So after flashing with an official rom/fw, you'll need to flash the hard-spl again if you want a custom rom on it.
hm... i think you have missunderstand me... ^^
I wasn't able to flash the new Custom Rom. I tried to do so and the phone was in bootloader mode and then there comes the thing that says "23%" ... "24%" and so on...
But after the Soft Reset ("...100%") there wasnt the new rom on my phone but the old one...
So that didnt work for me...
I think you have to flash the hard spl every time before you can flash a custom rom
Kid_DC said:
I think you have to flash the hard spl every time before you can flash a custom rom
Click to expand...
Click to collapse
No, you don`t need too, HardSPL stays forever.
And why wasn't I able to flash a new rom without hardspl first?
Kid_DC said:
And why wasn't I able to flash a new rom without hardspl first?
Click to expand...
Click to collapse
Because, before you flash custom rom for the first time, you need to HardSPL first, but only one time.
Remove, duplicate post
hm... This was my 30. flash of a custom rom, I think.
Can`t say, .nbh file was damaged in some way, but if u flash same file after HardSPL, hmm.. wierd Never happend to me.
Related
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
USPL and HSPL do this for you so you are able to flash a rom or radio. Read this page from wiki. It'll help you understand
Follow cRaCKwHoRe's guide on how to flash (can be found in my signature). If you intend to do a lot of flashing I'd flash HSPL as its permanent whilst USPL is temporary and you'd need to re-use it before every flash to new rom or radio
Latest HSPL can also be found in my signature
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
futurama said:
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
Click to expand...
Click to collapse
Flashing from one HTC stock rom to another you don't need to use USPL or HSPL. But going to a cooked rom you do.
Answer to your query is it depends on route you take. If you go down the USPL route you'll need to follow cRaCKwHoRe's guide. Would take to long to explain and he as already done a very good tutorial on the subject. If you go down HSPL route, all you need to do is flash latest HSPL then 1.56 rom
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
futurama said:
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
Click to expand...
Click to collapse
I'm currently testing Dutty's V3.4. His V3.3 is already released but I'd wait for the new release hopefully in a few days. Both are based on WM6.1. Alternatively their is so many good roms out there. I'd also recommend Davideuck, EnergyROM & L26_THDV2.2 (Laurentius26). All very good roms by very good cooks. Best thing would be to try each of them and make your own opinion
thanks again mate, you are a legend, Ill post tonight to let you know how it went.
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM?
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
davemazo said:
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
Click to expand...
Click to collapse
There are a few forms of unlocking but the bottom line is that you need to bypass the checking which is done in the flash process.
One way is permanat as done once no issues anymore - HSPL
Another is as and when you need - USPL.
Wiki has a walk through that needs to be upated but I thought still was useable.
Flash the new 1.56 shipped rom and then move on to cooked roms. (will help you by pass the greenscreen issue)
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
futurama said:
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
Click to expand...
Click to collapse
Sorry to hijack your thread futurama but I am having the same problem. Could you let me know how you did it
Thanks HDuser. Not sure if you know where I`m up to but originally I flashed my Orange 1.19.61.1 ROM with USPL and then flashed Duttys 2.7 1.56 based ROM which has given me the green screen problem. An earlier poster suggested I flash Olinex HSPL 1.54 to cure the problem. The problem I am having now is the phone refuses to sync with the PC. I have tried Vista and XP, the PC does not hibernate or sleep or anything, the phone is set to not switch off. It will usually sync on first connection but after a few seconds it will disconnect and therefore HSPL is reporting as being disconnected.
I have tried the earlier HSPL and HSPL 1.56 (as the ROM in bootloader screen is reported as being 1.56 and SPL is 1.14). I feel I`m going round in circles and its only a matter of time before I brick the phone.
I have read and re-read the wikis but I am now just getting more and more confused.
davemazo
Look the best way to approach any problem is to go back to the roots.
Flash a stock rom, find your own stock rom and refalsh it, then take it from there.
Your post is missleading and I have no idea were to sart. One issue is your PC ist does not Hibanate, not or go into sleep mode, at the saem time you are saying that you can't sync. Sounds like you have other problems and those other problems are making you have problems with your device.
Thanks HDuser. Sorry for confusing you, but I am now totally confused myself, Basically though the phone does not sync with the PC, I have tried 2 PC`s, with Vista and XP.
But back to your point about flashing stock ROM, I have tried a link in the wiki to download the one I need which is Orange 1.19.61.1 but the link seems to be broken and I don`t know where else I can get it. It doesn`t seem to be on the Orange website or HTC.
HDuser said:
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
Click to expand...
Click to collapse
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
futurama said:
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
Click to expand...
Click to collapse
It sounds as if you have it sorted now and everything working. As HDUser stated previously HSPL & USPL allows you to bypass the CID lock to enable you to flash new roms
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
futurama said:
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
Click to expand...
Click to collapse
Of course you can. All information you need including original stock radio's, roms etc are available in wiki to download.
I have flashed my Tilt and my Wizard numerous times but I'm wondering if it matters which you should flash first.
if you have the HTC base rom fro your device should you go right to the custom rom and then the spl and then radio or does it even matter what the order is.
normally I put the SPL and then Radio and then the custom rom.
Is there any preference on this?
Cheers
Chris
As long as you have HardSPL'd your kaiser, and the custom rom doesn't have a radio included in it, then it doesnt matter which order you flash the rom and radio.
stuntdouble said:
As long as you have HardSPL'd your kaiser, and the custom rom doesn't have a radio included in it, then it doesnt matter which order you flash the rom and radio.
Click to expand...
Click to collapse
ok cool and if you HardSPL'd your kaiser once to go to a custom rom and then decide to change to a different one so you go back to the stock rom does that change your SPL back or once its changed its changed for good?
To be honest I dont even see where the SPL shows.
Cheers,
Chris
cholubaz said:
ok cool and if you HardSPL'd your kaiser once to go to a custom rom and then decide to change to a different one so you go back to the stock rom does that change your SPL back or once its changed its changed for good?
To be honest I dont even see where the SPL shows.
Cheers,
Chris
Click to expand...
Click to collapse
I think I found my answer regarding Hard SPL's "A Hard SPL is one that is permanently flashed in your device memory and will boot up every time your device boots." http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
So I guess you only have to do this once. If I'm mistaken please let me know.
Cheers,
Chris
cholubaz said:
I think I found my answer regarding Hard SPL's "A Hard SPL is one that is permanently flashed in your device memory and will boot up every time your device boots." http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
So I guess you only have to do this once. If I'm mistaken please let me know.
Cheers,
Chris
Click to expand...
Click to collapse
Correct you only do it once unless you wanna change your hard-spl to a different version.
Hi all i am new to this got my first HTC Touch HD today
looking at the roms theres a few i like just got a few questions.
what is the best to use HSPL or USPL?
will flashing a new rom mess up my sim lock?
When it says donate whast the normal to donate? dont want to give to little
thanks about it
Thanks
Jonathan Hemmings
HSPL sits in ur rom permanently whereas USPL opens the loop once. That means flashing each time u need to use USPL
U need to read this guide fully to understand and make ur choice
http://forum.xda-developers.com/showthread.php?t=505377
People donate as low as US$ 5 whereas donating US$ 10 is a good amount to start with. Flash different rom's and make ur choice which author u like more. Then u can donate a higher amount if u like that author's creation. I am a big fan of Energy's pheonix rom.
Regarding SIM lock. Flashing rom doesnt mess with ur SIM lock or unlock feature and if ur sim is locked u can open it with olipro's tool. Try searching it in the forum.
It all depends on u what flashing method u choose, how much u donate and which rom meets ur needs....
Welcome to XDA and have a great time here.
BEWARE: Flashing ur phones makes ur phone look much cooler and sexier and u will madly fall in love with ur Touch HD once u find ur perfect rom
HAVE A GREAT STAY....
Thanks for the info mate
one thing i cant get my head round is the USPL and HSPL it say that HSPL is permanent but then it says once you have done it you can flash as ment times as you like ?? i am a little confused.
with the USPL if the battery dies or you take your battery out will it lose the rom?
Thanks
Jonathan Hemmings
also is there a way of making a copy of the rom that is on my phone now just incase i did not get on with any of them and i wanted to go back to this one?
thanks again
hemmjonny said:
one thing i cant get my head round is the USPL and HSPL it say that HSPL is permanent but then it says once you have done it you can flash as ment times as you like ?? i am a little confused.
with the USPL if the battery dies or you take your battery out will it lose the rom?
Click to expand...
Click to collapse
HSPL is one written to the handset. USPL isn't written to the handset, the files are sent to the handset when used and it loads another SPL on top of the existing one which is lost when the handset is rebooted (i.e. when the ROM has been installed).
I personally use USPL so I can keep the stock SPL as installed by HTC. Some prefer the HSPL as they don't have to use USPL everytime they want to flash.
I'd probably start with USPL and if you find you flash more often, change to HSPL. Apparently though, HSPL provides more protection against a bad flash - unsure what it does though as I've never used it
It doesn't matter what SPL you use though, once a ROM is flashed to the phone, it stays there until you flash another.
hemmjonny said:
also is there a way of making a copy of the rom that is on my phone now just incase i did not get on with any of them and i wanted to go back to this one?
Click to expand...
Click to collapse
I'm unsure of any way to backup an existing ROM. I'd take a look on HTC's website as they may have an updated stock ROM available for download. I keep that one as my stock ROM to revert to after a couple of custom ROM flashes.
hemmjonny said:
Thanks for the info mate
one thing i cant get my head round is the USPL and HSPL it say that HSPL is permanent but then it says once you have done it you can flash as ment times as you like ?? i am a little confused.
with the USPL if the battery dies or you take your battery out will it lose the rom?
Thanks
Jonathan Hemmings
Click to expand...
Click to collapse
Factory SPL is preventing you to flash any ROM made for another region or another language. Sometimes there are specific ROMs, made by HTC for certain providers, and SPL takes care to allow you only to flash an official upgrade for the same provider or the same region.
If you wish to flash a cooked ROM, you need to circumvent this protection in the SPL.
USPL makes a loophole in your existing SPL and it will allow flashing (now I see jonifen has explained it better). However, that loophole will disappear after the hard reset. Whenever you decide to flash another ROM, yo'll have to repeat USPL. The advantage is that you keep your official SPL.
HSPL is completely replacing your SPL with a new one, and the new one is slightly changed by OliNex: it always let you flash any ROM you want.
Hard reset will not affect it, as hard resets do not replace or wipe the ROM, SPL or the radio, they only wipe all your data and all 3rd party applications installed by you.
Thanks for all the info i am now flashing i have gone for HSPL as my phone is out of warranty + its lots easier + more stable from what i have read on here.
Thanks again for all your help
Jonathan
Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom
Hi, can you help me with how to remove the Hard-SPL to upgrade to the original ROM for HTC Touch Pro 2. I'm from Bulgaria, the phone is not locked to an operator (AT & T Orange), etc. What files will I need and how. I also want to download the original Rom from the site of HTC. Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=550131
All info you need is here.
One note from my experience: first downgrade to original rom then install original spl. I had an issue, it was bricked, but all it needed was to one more time upgrade original rom.
You mean that you must first install the original Rom (I could not download it from HTC's site can help you). And then correct me if I'm wrong:
First you say to install the original ROM.
2nd to download RhodiumSPLRelocker_079SPL.zip unzip it and run. Exe
3rd Stock_SPL_Restore_084.zip to download and in the same way as putting a new ROM to choose it (unzip it first)
Do I need to do Hard Reset at any time? And maybe a little help otkade to download original ROM.
I did this from the link you gave me in boot loadera get out this Oninex, then I load again ROM-a which had previously tried to put my original and gave me an error
The instructions say to flash the stock ROM before you re-lock SPL.
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
ivailo0 said:
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
Click to expand...
Click to collapse
i don't think you can re-lock your phone with custom rom on your phone but what you do is hard_spl it (if spl re-locked) then
task 29 ----> install stock rom ----> re-lock spl
good to go
Isteglih his RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the right Stock Rom correct me if I'm wrong. Inastaliram it and to 0% gave me an error. - 294 Invalid Vender ID.
But it's not e what I need.
I'm not too far into things ...
Please help, now I can not get no ROM, and this olinex do not write anymore. and gives me an error any attempt to put the new ROM. Now when I work under the Energy ROM ...
Hi
Before flashing another rom, please use the tool called task29. get it here http://forum.xda-developers.com/showthread.php?t=649191
Check here for another rom for your device http://rapidshare.com/#!download|33...dio_Rhodium_4.49.25.17_Signed_Ship.exe|180171
or here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
use the SPL relocker tool LAST
Good luck!
Hello, thank you for the help you gave me, but I think we still have a problem (task29). Do the following:
1 - http://forum.xda-developers.com/showthread.php?t=649191 here I lost my task29.zip.
2 - unzip it, inside there was task29, had ROMUpdateUtility.exe. ROMUpdateUtility.exe and opened as follows next .. next .. me and sticks to 0%.
In the above post I mentioned that yesterday I did relock SPL before I know that I need to do this first (I do not write now in olinex boot loadera). I think from there
:-( you're in bad way. look for some help here http://forum.xda-developers.com/showthread.php?t=550540
The solutions mentioned above will NOT work, because you don't have hardspl installed.
Flash Hardspl again and then restore to stock rom and spl.
Guessed for it, but waited for someone to tell me. I will use this thread http://forum.xda-developers.com/showthread.php?t=550131 and you will get new and will write what happened. Thanks!
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
This is what i told you to do in Post #7 ..... i guess you didn't read it at that time but anyways glad to know your problem is solved
You are right. Thanks again
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
Bravo! so you how many of your fingers still have finger nails? lol
Baptism by fire, eh? Nice time.
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
jfandl said:
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
Click to expand...
Click to collapse
he already had the same phone Hard-SPLed. the license works for the same phone forever. a different phone is different.