Prompt. Such a problem here. At 6.5 is not working part of the programs in the Settings menu. When you click on them nothing happens.
This problem happens to me from time to time.
Finally I discovered what the cause is. I am not sure whether you have the same problem but I will describe mine:
The problem is actually related to a bug in the Sound and Notifications settings application. When you open this setting it is not possible to close it. You can ignore the problem by pressing the Home hard button. However when you do this some of the settings are not accessible until a soft reset. If you perform a soft reset your problem should be gone (until you open the Sound settings again )
I hope this helps.
Related
Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Do you have a password set? Does this only happen after a call? If so, this has been discussed many times - just do a quick search.
If not, I´m afraid I can´t help you with your issue.
Good luck!
djmaven said:
Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Click to expand...
Click to collapse
I think I had this problem also. I'm not sure what causes it, but it looks like ti appears after I try to use MS Voice Command.
I had this problem. I found it doesn't need a soft reset, just switch it off (hit the power button briefly) and back on again. Fixed it every time. Annoying but not fatal...
I am having a similar problem. I recieved an 8925 with a touch screen that doesn't work. No physical damage, but I noticed there is no start screen. I got it to upgrade to WM 6.1but still no start menu or system settings. It boots to the align screen but of course the touch screen doesn't work so that's all I get. Sometimes I get past that and the rest of the PDA seems to work with the keypad. I have reset it several times and still nothing. I removed the touchscreen and ordered a new one. Hope I haven't spent folishly. If someone has a clue to what the problem is I would be very grateful.
I'm assuming this is a bug, but hopefully there's a fix. when I go into the advanced tab under power settings, I try to set the backlight timeout on battery power to 30 seconds, but it keeps reverting back to 10 seconds. has anyone else experienced this, or is there a workaround?
Use the configuration utility located at http://forum.xda-developers.com/attachment.php?attachmentid=69442&d=1202399126 to configure this setting. Then, promptly tell it to do the soft reset. For some reason the settings don't get saved via other means. This is the easiest way to ensure it gets done correctly...just let this app do the soft reset when you make mods...then make the next mod...reboot.....continue....
baliles said:
Use the configuration utility located at http://forum.xda-developers.com/attachment.php?attachmentid=69442&d=1202399126 to configure this setting. Then, promptly tell it to do the soft reset. For some reason the settings don't get saved via other means. This is the easiest way to ensure it gets done correctly...just let this app do the soft reset when you make mods...then make the next mod...reboot.....continue....
Click to expand...
Click to collapse
Thanks the tip baliles. I have the advanced config tool loaded, but I can't find any power management options that address backlight timeout. it is called something else?
Has anyone come up with a fix for this as yet?
It's so annoying when I make a call and have to keep hitting the power button on the top left (T-mobile MDA IV) to bring the screen back to life mid call if I have to hit number keys when using automated phone service or if I need to put a call on hold etc etc...
A fix would be excellent..!
Here you go.. Works for me. I've forgotten who's responsible for the .cab, but credit goes to whoever made it.
EDIT: oops.. obviously i'll have to start reading before posting. This cab probably doesn't help you at all..
DOH!!
What does it do?
I'm desperate and will try anything lol
I will try to explain the problem as simple as possible even if it's not.
The problem is as following: after closing "opera" and I disconnect from WIFI after awhile being used pressing immediately the "hang up buttom" to enter into the rapid menu or the specific function that I selected, it does not do what it's suppose to but the touch flow iscons scroll towards the right. The only solution to abilitate once again the original fucntion is to do a soft reset.
Can you help me?
thanks
I have been experiencing something similar. Sometimes a press on the end call button seems to be registered by the phone as a "move right" command. I have no idea what it is. Can anyone help? After I go back "home" everything seems ok.
Maybe that touch pad at the bottom is not as good as it should be?
ok but why after soft reset the button turn ok?
please help me
So all of a sudden (well likely not all of a sudden... I must have done something) the red phone "hang up" button doesn't do it's job anymore. It doesn't hang up when in a call, like it used to.
I think (stressing think, cuz I'm not quite sure) that this started when I uninstalled Resco Contact Manager but am not sure...
Anyway, wondering what I need to do to re-enable the functionality of that button.
have you eliminated the possibility of the button failing at a hardware level?
i mean to say, does the red key work to minimize all programs? does long pressing the red key work for whatever long press configuration you've set up?
if the ONLY behavior of the red key that is affected is hanging up a call, then don't fret...it most certainly is a software issue and it is likely someone will be able to help. but it would help the others to know whether or not this could be a hardware issue
for all software issues, the bottom line is that hard resetting solves the problem as a last resort
Did a soft-reset (for another reason) and now the key is working again. Minimizes programs, and ends calls.
Weird.
Let's bump this topic...
I Have the same issue... and only with a soft reset solves this. But after some time of use the issue comes back again and then I need to do another soft reset to solve the problem. I've been searching and experience with the phone and it seams to do this after using the sms feature...
Very odd...
Help. the red reset button on my touch diamond no longer seems to respond. Pressing it does nothing. I installed Remote Tracker some time ago and not sure if it stopped before this or after. Removing the battery does not help. Has anyone had this problem. I can not hard reset either. Its like the switch might have died. (
Mmmm...
I don't know about your reset button - it sounds like a hardware issue with the button itself, but you can hard-reset by going to Settings / System tab / Clear Storage - type in 1234 and tap 'yes', the device will do a hard-reset
Thank you. are you sure this "clear memory" preforms a hard reset? i thought it just deleted the internal storage. I will try this asap.