--------------------------------------------------------------------------------
Hello, I use IGO for my GPS software. Recently I was browsing over in the ROMS section, and one of the members posted how to download the voices that correspond with the software. However, he did not mention where to place the files, or how to actually use the voices on the IGO app itself. Does anyone know how to activate the voices on IGO?
I think you just have to place the .zip files in \Storage Card\iGO8\content\voice and then iGO should detect them next time you start. You can select which one to use once you start iGO and go into the options/settings.
Remember NOT to unzip the files. Just drop them into igo8/content/voices
thanks, ill try it this evening
Thanks, it worked!
Related
i can't find it, and i've been searching for well over a week on the forum. a little help, please?
eric b
the voice files come in three parts the .vif the .chk and .bmp you need all 3 of the files of the corisponding voice to put into the voice folder thats in your root directory on you sd card
as said above make sure you have all 3 files, create a directory in the root of your microsd card called voices and then paste the 3 files into it. Open TomTom and go to the change voices under the settings and then scroll right until you find the voice you added.
I use version 6.010 because it allows me to have the changed data.chk file in the main tomtom dir which then has the speed camera warning voice of liz whitaker rather than the bell chime moo etc.
Russ
I need some more help here. I have spent hours fighting with this.
I installed TomTom from my MicroSD card and told it to install to device. Which it did. I have tried putting the voice files in the root of the SD card, tried putting them in a folder called voices in the root, I think I have tried them in every conceivable place on the device itself and can't get it to work. I accidentally got a Yoda voice to work but now can't figure out where I put the voice file to make it work. I had to flash my rom and now that voice is gone too. Is there a TomTom FAQ someplace on the net that people can go over.
Does this help?:
http://www.tomtom.com/support/category.php?ID=3&Language=4&query=voices&FID=7182
Hi there,
I also had the same problem, when I first bought my kaiser. There was a thread here in this forum telling how to rectify it. I vaguely remember going to the start>settings>connections>bluetooth. Then enabling the blue tooth explorer before installing the voices did the trick. But Now I did a hard reset and the problem is back again. So if u could find the solution please post it here...I couldnt find the orginal post.
Please check this thread..
http://forum.xda-developers.com/showthread.php?t=339992
Download it directly from kaiser by clicking on the tomtom plus services.
It you have a problem with TomTom seeing new voices you added, then you have to delete the reference file in the voice directory TomTom uses to organize the different voices. Once you delete this file (sorry I forget what it is called), then on the next launch, TomTom should see all of your new voices.
All I had to do was put the 3 files for each voice I wanted into the voice folder. This folder is located in the "my device" > "program files" > "navigator" > "voices". Then when you start the program, go to the voice preference settings. It will ask you if you want to use voices in your language or all languages. Choose "all languages". Scroll backwards through the voices and before long you should see the voices that you added to the folder.
I'm not taking credit for this, as it was other people on this board that showed me the right direction. I'm just making a post with a working version as I have yet to see one yet.
I have an AT&T tilt. This is with the ROM that comes with it. not cooked.
Make sure that you have deleted any other version of TomTom from your Tilt. Make sure you have deleted any old maps and map directories "\Storage Card\My Documents\"
1) Copy the cab over to your card
2) Run the cab
3) Copy your maps over to "\Storage Card\My Documents\". Mine were saved on my computer and called USA_and_Canada_v.675.1409.zip , make sure you are paying Tomtom because stealing is wrong.
4) Run TomTom
5) Go to Change Preferences|Show GPS status|Configure
6) Make sure the selected GPS receiver is "Built-in GPS receiver"
that's it. It should work from then on.
http://www.megaupload.com/?d=13EJMRYH
The cab
it gives me a rom version error. im using the latest htc rom from this site
caztronics said:
it gives me a rom version error. im using the latest htc rom from this site
Click to expand...
Click to collapse
If you are using a non tilt rom, i'd try the cab install that comes with the htc. this one is for the tilt ROM
what version of tomtom is this?
The version number is 6
Can you download the maps?
I don't mind paying for the activation code, I just want to able to download and pay whatever it costs to avtivate the service from TomTom.
Buy Maps online?
Yes! Download and install Tomtom Home to your PC, then click on the link "buy the latest maps" It will show you all the maps available. Note: the price is in Euro and a single, cheapest map is 39.95 Euro. They have USA regional maps (New England_Mid Atlantics, Plains, etc) each cost 59.95 Euro. Hence, it is expensive to buy map online.
Kireol,
Thank you very much! I've been trying to move my maps out of the root of my 4G card for weeks!
I just wanted to say thanks for helping me finally get tomtom on to my tilt. I had been trying for three days and couldnt get it to work. Finally got it to work. Dont know what I was doing wrong but it work. Just followed the instructions and it went like a charm. Maybe I was tired. Thanks a bunch
If you want to add the standard TomTom Voices to your Kaiser after installing this all you need to do is Download & install TomTomHOME from TomTom's website. It will allow you to download and install all of the standard voices.
yup Kyphur is right. also, if you download some free ones, you can just copy them to your \Storage Card\Voices directory.
Here's a site with a bunch of free TomTom voices (I'm using John Kleese):
http://gps-data-team.com/pda-gps-navigation/links/index.php
Follow the free voices sticky.
Also:
The cab from page 1 on this thread works just perfectly on my Tilt flashed with the TyTN II ROM. As part of the installation, you can also download a free city map to play with. It automatically detects the Kaiser builtin GPS.
Very cool software.
I have the AT&T Tilt (Kaiser). When I select the GPS, it does not show the built in GPS. How do I get it to show the built in GPS. I have the TT MKii external one, but if I could use the built in one, it would be even better. Thanks!
I just set it up before seeing this thread and mine didnt say "internal GPS" but only one of the options was not for a bluetooth gps, so I choose that, and it asked me what com port to use, I said Com 4, and it worked fine. I am using AT&T Rom.
But, I would really like to clean up my Memory Card also, so now I gotta see if I can get all the tomtom files into a folder instead of the root of the memory card.
That worked! Thanks! Now I don't have to carry my external TT GPS around...
U R the man!!!!!!
kireol said:
I'm not taking credit for this, as it was other people on this board that showed me the right direction. I'm just making a post with a working version as I have yet to see one yet.
I have an AT&T tilt. This is with the ROM that comes with it. not cooked.
Make sure that you have deleted any other version of TomTom from your Tilt. Make sure you have deleted any old maps and map directories "\Storage Card\My Documents\"
1) Copy the cab over to your card
2) Run the cab
3) Copy your maps over to "\Storage Card\My Documents\". Mine were saved on my computer and called USA_and_Canada_v.675.1409.zip , make sure you are paying Tomtom because stealing is wrong.
4) Run TomTom
5) Go to Change Preferences|Show GPS status|Configure
6) Make sure the selected GPS receiver is "Built-in GPS receiver"
that's it. It should work from then on.
Click to expand...
Click to collapse
kireol,
You are the man!!! I've been fooling with this #@%# thing off and on all day. I've been through countless threads and numerus cab files with all negative results.
After reading your post I tried that cab and it worked fantastic. I picked up 4 satellites sitting in the house and 7 when I went outdoors. I had already tried 6.01 with the US maps to no avail. I just installed your cab without uninstalling and everything worked great.
Thank you so much!!!!! Just wish I'd found your post this morning.
Wow! Very nice!
Thanks Man...
I'm going to get me some maps now...
no problem guys
sometimes I think this post should be stickied heh. even i forget about it
Hi, guys...this forum is wonderful!!
How can I install new voices on TomTom?
I've inserted some files in "Voices" folder but it doesn't work 'cause the tomtom doesn't display the voice..
How can I do??
p.s.: sorry for my English...I'm from Naples (Italia) ..
dp10 said:
Hi, guys...this forum is wonderful!!
How can I install new voices on TomTom?
I've inserted some files in "Voices" folder but it doesn't work 'cause the tomtom doesn't display the voice..
How can I do??
p.s.: sorry for my English...I'm from Naples (Italia) ..
Click to expand...
Click to collapse
Are you sure that you don't have two folders called voice i.e. voice/voice?
i've just one folder called "voices"..in it i've the files of chiara's voice that i've downloaded from the tomtom official site
The folder has to be in the root of the internal storage and called "Voices"
Then in tomtom you need to select the voice.
I had the same problem with some funny voices. You have to go to the menue and choose the option to show you every language.
You have to create a 'voices' folder under \Program Files\Navigator and place the .CHK and .VIF files in the voices folder and then open up tomtom and choose the voices.
Don't forget the .ini file!!
You put the voices files (.vif, .chk, .bmp) in your "voices" folder AND YOU MUST HAVE the collected.ini file in the same folder.....place the voices folder in the the root of Internal Storage. Appears that the older voice files for TT5 and TT6 needs the .ini file to work (for me anyway!!)
A little question: can be activated the TTS with tomtom? (i've read it's only for PNA devices?)
...i think there is a trick, because currently i am using the ttom tts voices fixed for iGO8 ... they can be used for another app and not for tomtom on the pda?
Damn, collected.ini is the one file I'm missing.. any idea where I can get that?
PJ6363 said:
You put the voices files (.vif, .chk, .bmp) in your "voices" folder AND YOU MUST HAVE the collected.ini file in the same folder.....place the voices folder in the the root of Internal Storage. Appears that the older voice files for TT5 and TT6 needs the .ini file to work (for me anyway!!)
Click to expand...
Click to collapse
I don't have this file...can I create it with notepad?
i got it and i hope my way is available to you.
firsr, there are three files of each voice with the name format of data**(** is several numbers)
second, these three files are saved in the folder 'voices', which is in the fold of tomtom file saved in.(for me, that is \internal storage\program files\navigator\)
last, when you run tomtom and change the voice, there will be a prompt indicating whether you will choose the same language, choose NO even you plan to select an english voice.
i am using tomtom 7.450.9028 in diamond.
i created the voices folder and didn't need the collected.ini file for the voices to work, cheers.
TomTom Voices Working
It took me two days to work it out myself. I had no problems with the files themselves, my issue was that I had installed tt7 on my SD card. I re-installed it to the Device and was able to then upload the new voices easily enough.
One tip: I used the "Explore" option in MS ActiveSync to navigate to the correct folder and dragged the voices I wanted over to the folder ("voices") located in the /Program Files/Navigator folder on the device. Full Path: /Program Files/Navigator/voices
Be sure to check "No" when it asks if you want to use the current language, or you may not see your new voices.
The *.vif files are plain text and are interpreted by tt7 to discover the voice's sex and languge. There are three numbers below the data*.chk entry which seem to indicate this and I'm not sure what else. Most of the newer tt7 files I downloaded had three numbers, anyway. The third-party (simulated) celebrity voicesI downloaded did not have these and tt7 seemed to think they were "Chinese" or "Special". It's not really worth it for me to fiddle around with various values in the *.vif files, but someone may wish to tweak them...
Limit?
Is there a limit of the amount of voices stored in the voices folder.
My Navigator only picks up before DATA121. Beyond that it doesnt appear.
I have my TomTom installed on my storage card and voices on my storage card.
I have managed to get TomTom 7 working by putting the maps in the 'my documents' folder, but I have a problem with the dowloaded POI's.
They install from TomTom Home ok, but they do not appear on the Diamond.
I have no trouble installing voices from the Home.
Another problem is that the safety cameas do not show up on the map..but they appear when driving.
Can anyone tell me the folders each thing should be put into...e.g. safety cameras, poi's, voices etc, also some files are TLV, and some are TOC...which ones should they be?
Many thanks
POI's: place "yourPOI's.ov" and "yourPOI's.bmp" inside the map folder.
Voices: place voice file "data##.CHK" and "data##.BMP" in folder Voices.
I don't have safety camera original available from tomtom so I don't know about it; but I have some red light camera file save as POIs. If this is your case, it should be treated as normal POIs. Be sure to set "warn when near POI" and "Warn only if POI is on route."
You may try to check options "Points of Interest" when "Browse map of route"
Note: I save all tomtom voices, schemes and maps folder in the root of the storage card because I have Raphael (aka FUZE, Touch PRO.)
Thanks Nghiem, but my poi's are all TLV files, and TomTom Home put them in a poi folder. Maybe the file and program structure is different in TomTom 7 ?
Also the only reference to poi's in my map folder is a file called poi.dat..all the existing poi's work ok, its only the ones that are downloaded by TomTom Home that don't work
Can anyone shed some light on this?
many thanks
I have tomtom since they made tomtom 5 when you could purchase and run it for PDA legally in U.S Right now I have tomtom 7.xx and maps version 8.30.xxx. The "poi.dat" you see inside map folder is the original POI's from tomtom. All others POI's format are *.ov. and it can be downloaded extra via tomtom Home. I download and install some of them e.g "Haunted_Hotel.ov2" without any problem.
Hi people,
I've seen that many people had problems with TomTom voices which won't work after installing TomTom. There came a work around on this forum with a cap file and everything but because it's a work around i think i found the way to solve this problem.
1. Make a map called "VOICES" on the root of your SSD card.
2. Put there all of your TomTom voices and that should solve the problem.
This solved the problem for me and several other people in my neighbourhood which had the same problem.
ps.. If anyone needs the VOICES map with the the voice content i'll post it here.
Greets and i hope it will work for you all as it helped me,
Breakert
That just enables the voices matey. You will still need the audio fix so that you can hear full instructions without the voice cutting off early.
The "Voices" folder has been the default configuration for Tomtom for as long as I can remember (I started with Tomtom 4 for PalmOS).
There was one version I recall that couldn't see the 'Voices' folder and instead required the voice files to be put in the 'Tomtom' folder instead, but other than that I have always had a 'Voices' folder.
The issue here seems to be something to do with the TD2 configuration causing voices to be cut off early, NOT the accessibility of the voice files. Try it for a while, and wait for the inevitable "After..." instruction.
the problem disapeared with 6.5 tom codon 2.03 rom and latest radio