On my Touch Cruise I could disconnect 3G through hitting the button in the taskbar and clicking the disconnect button in the cloud. This aint working on the D2. How do I disconnect the 3G connection conveniently?
deechte said:
On my Touch Cruise I could disconnect 3G through hitting the button in the taskbar and clicking the disconnect button in the cloud. This aint working on the D2. How do I disconnect the 3G connection conveniently?
Click to expand...
Click to collapse
I'm not sure but as my view point.
On 'Communication' of 'Setting'
The bottom is 'Data Connection'. I think there is 3G connection so If it is on. Try to turn off.
Thanks, that works!
or you can try downloading a cab somewhere in this forum called "nodata" works like a charm.
Is there an option anywhere to limit the phone to only a 3G network and not roam to the slower settings. My previous phone was a Viewty and there was an option on there to lock it to the 3G.
idesmond said:
or you can try downloading a cab somewhere in this forum called "nodata"
Click to expand...
Click to collapse
Thanks. I know Nodata, and use it when I want to prevent roaming. My question was to - temporarily - disconnect. For instance, when I am at home and want to watch Youtube movies, I want to be sure it goes over my WLAN network and not over 3G. When I disconnect 3G and don't see it reconnecting I know for sure traffic goes over wifi.
livej's already provided a good alternative.
I also use nodata even when its temporarily. I just disable GPRS/3G, etc. So forcing it to run on wifi. Then when im done, i enable my data services again.
livej said:
I'm not sure but as my view point.
On 'Communication' of 'Setting'
The bottom is 'Data Connection'. I think there is 3G connection so If it is on. Try to turn off.
Click to expand...
Click to collapse
Could you explain this again step by step Is it under settings, or ??
PhFr said:
Could you explain this again step by step Is it under settings, or ??
Click to expand...
Click to collapse
Hold down the bottom right hardware key (the red hangup button). A menu should appear (if not change you Quick Key under Setup > Personal > Buttons > Quick Key to turn all options on). The middle option is to disable the data connection.
You can also set the Quick Key to disable the data connection by default.
chch said:
Hold down the bottom right hardware key (the red hangup button). A menu should appear (if not change you Quick Key under Setup > Personal > Buttons > Quick Key to turn all options on). The middle option is to disable the data connection.
You can also set the Quick Key to disable the data connection by default.
Click to expand...
Click to collapse
Ok now I can do it. Thanks
deechte said:
On my Touch Cruise I could disconnect 3G through hitting the button in the taskbar and clicking the disconnect button in the cloud. This aint working on the D2. How do I disconnect the 3G connection conveniently?
Click to expand...
Click to collapse
To turn off 3G (remember to turn it back on when you need fast data)
From Touch Flo Home Screen
Settings Tab -> All Settings -> Personal Tab -> Phone -> Band Tab -> Select Your Network Type -> GSM
boyard said:
Settings Tab -> All Settings -> Personal Tab -> Phone -> Band Tab -> Select Your Network Type -> GSM
Click to expand...
Click to collapse
Or:
Left hardware key > Menu > Options > Band Tab > Select Your Network Type > GSM
Does anybody know faster way to toggle between these options?
edit:
What about this solution, working for Topaz?
http://forum.xda-developers.com/showthread.php?t=502980
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i would like a faster solution to fast disable and enable 3G also
is there any fast program to do this ?
thx
Related
Foud here http://pockettoolman.blogspot.com/
It tweaks a lot of the Kaiser's functions
A tray utility giving you access to settings, and functions on your Pocket PC
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PT Menu
Tools menu
Data Connections
Battery Charging
Suspend - allows you to power-off the Pocket PC without having to press the Power button. You can also add the Suspend icon in the tray for easy access
Soft Reset - performs soft reset.
Settings - quick access to Control Panel applets.
ScreenOff - switches off the screen. You can create a shortcut to invoke ScreenOff. Great for binding to a hardware button to easy access
Lock Device - allows you to lock the Pocket PC when it's running. Using the same system password for unlocking.
Stay Alive [Power] - allows you to temporarily stop your Pocket PC from auto power-off.
Battery Meter - displays the battery life percentage in the systray
Disconnect - Disconnects current RAS connection
PIN Lock - Invoke the PIN prompt. *You must have the PIN prompt enabled for this to work.
Add Bluetooth icon in tray for easily power on/off Bluetooth. *Supports Microsoft Bluetooth Stack ONLY
Add WiFi icon in tray for easily power on/off WiFi
Disable SMS 'Message delivered" popup
Disable HTC screen off after a call has been connected
Enable/Disable window animation
Enable/Disable menu animation
Enable/Disable sliding keyboard to wake up phone
Increase System Font Cache
Increase File System Cache
Increase File System Filter Cache
Enable GPS Photo for HTC TyTN II
Disable camera default 90-degrees clockwise rotation
Hides contacts on SIM card - On my TyTN II, after a soft-reset, the flag is restored to show contacts on SIM card. With PT, if you set it to run at Startup, what PT does is apply the setting during execution, then applies again after roughly a minute after soft-reset to ensure SIM contacts are set to hide.
Enable/Disable SMS Delivery Report
Enable/Disable Flight Mode
Data Connections - Allows you to disable data connection entries to stop them from connecting automatically. You can also set data connection to be AlwaysOn
Use one line to show date in Today Date plugin if possible
Make reminders show only once
Enable/Disable Lunar Calendar
Change 4-way pad behavior in PIE
Enable/Disable ClearType in PIE
Enable/Disable running scripts in PIE
Enable/Disable running ActiveX controls in PIE
Enable/Disable ClearType in Landscape mode
Show EDGE network icon instead of GPRS
Adjust keyboard backlight timeout
Increase TCP Window Size
Enable/Disable security warning if program is not digitally signed
Increase number of TCP Connection Retransmissions
Increase number of TCP Data Retransmissions
Enable TouchFLO
Adjust TouchFLO sensitivity
Enable/Disable HSDPA
Set HTC camera to save pictures to \Storage Card\My Documents\My Pictures
Increase WiFi scan interval
Adjust WiFi scan interval
Set number of phone number digits to use for Call ID matching to your Contacts
*** Enable/Disable sliding keyboard to wake up phone ***
Does this works?
Edit: IT DOES!!! the divice won't wake up!
Thanks,
Nadavi
deleted from thread
Nadavi said:
*** Enable/Disable sliding keyboard to wake up phone ***
Does this works?
Edit: IT DOES!!! the divice won't wake up!
Thanks,
Nadavi
Click to expand...
Click to collapse
Yes it works
But hide Sim contacts doesnt work.....
Nadavi.
Not using sim card for contacts, anyone else face the same problem
looks handy
I've installed it on my tilt without any issues. Although, handango didn't want to let me download it saying its not compatible with my device. So far so good, will post any issues if any.
The right version for Kaiser is http://members.shaw.ca/pockettoolman/PocketToolman2.25b2.CAB
Download
Version: 2.25
File size: 137KB
Looks like they are tweaking the program every day. I think I will wait a few weeks for everything to get sorted out!
Is there any confllict with the other Tweak porgrams mentioned in this forum?
Installed and like it a lot.
I'm not finding the setting to leave the screen on during a phone call, can someone point me in the right direction?
Thanks.
michalopoulosgk said:
Is there any confllict with the other Tweak porgrams mentioned in this forum?
Click to expand...
Click to collapse
No, I am running both plus others
gregeast said:
Installed and like it a lot.
I'm not finding the setting to leave the screen on during a phone call, can someone point me in the right direction?
Thanks.
Click to expand...
Click to collapse
Hi gregeast,
The option "Screen off during call" is location on OS Tweak under the Phone section. Uncheck that checkbox to keep the screen on during phone calls.
Thanks for the quick reply. I'm running version 2.25 Build 2. I was running in landscape display and couldn't see the --More-- button on the second OS Tweek screen to get me to Phone. In portrait it's there, just FYI.
Oh, and it worked
Em I the only one who can't find the download link?
EDIT: Nevermind.
download link for v2.25
ZzFDKzZ said:
Em I the only one who can't find the download link?
EDIT: Nevermind.
Click to expand...
Click to collapse
ok, I'm a dummy. Where is it?
The download link is on the right column. I'll make it more visible later tonight
I added a "Download" button on the right hand side of the page.
Most Recent Version
Please can anyone let me know if they are using the most recent version of PT2? I am really interested, but have read that the latest version causes glitches and hard-resets. I'm in hospital at the moment and can't afford to brick my phone! Cheers guys.
I was a big fan of PocketToolman on my old phone, but now I'm running manilla2D I don't have the tray down the bottom any more. Does anyone know a good way to get at Pockettoolman with Manilla running?
I am having problems using the internet whilst making or recieving calls, does anyone know how to rectify this or could this be a pc fault as i am running vista? Or could it possibly the rom (2.03.l3v5y WWE)
Mine does this aswell mate. Always has, regardless of what ROM im using or what pc im on.
Dont know how to do both but i really would like to know.
Also, to prove its not the pc, whilst i was on the phone (loudspeaker) i tried to use google maps to find a shop, and it reported that there was no data connection - so it seems the phone cuts the data off whilst on a voice call.
I hope someone knows/can find a solution to this....
Try This......
On the handset, tap Start and select Settings.
Tap the Connections tab.
Tap the Connections icon.
Tap the Advanced tab.
Tap Select Networks.
Under the first drop down box, tap New…
In the Enter a name for these settings: field, enter Orange WAP
Tap the Modem tab.
Tap New…
In the Enter a name for the connection: field, enter Orange WAP
Tap the Select a modem drop-down list and select Cellular Line (GPRS, 3G).
Tap Next.
In the Access point name: field, enter orangewap
Tap Next.
If required, in the User name: field enter Orange
If required, in the Password: field enter Multimedia
Tap Finish.
Tap the Proxy Settings tab.
Select the This network connects to the Internet option.
Select the This network uses a proxy sever to connect to the Internet option.
Tap Advanced… Tap on HTTP.
In the Proxy server field, enter 192.168.71.35
In the Port field, enter 8080
Tap ok five times
This changes your setting from GPRS to WAP.
It mite work cause i think its got sumthing to do with how your actually connecting to recieve data & voice calls & if your in the right area where you can actually recieve what you need to do what you want.
I use the internet on my HD and make n recieve calls all the time area dependent....
The settings above are for Orange users only....
thedaddyy, I tried your suggestion and it appears to work
The speed is massivly reduced whilst on the phone but it remains connected and able to browse.
I used speedtest.net to check the speeds of the connections and the results are below. I had HSDPA connection with only 1 bar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for this suggestion
I recently picked up Tasker, and so am trying to figure my way around how to use it for my in-car install. However, I can't seem to figure out, what is probably the most important piece, getting the screen to switch off / airplane mode to switch on when I remove power. I have installed Secure Settings plug in, but everything I have tried so far to get the screen to switch off has failed. I am sure I am missing something simple here.
Also, is there a way to have Tasker kill all open apps, instead of having to individually list apps?
Thanks.
Edit: Should have put this in the apps section.
Edit Again: Figured out the screen switching off, System Lock did the trick. For some reason it is not killing open apps though when the power is removed.
New profile>name it whatever>State Context>Hardware>Usb Plugged>Invert
New task>name it whatever>hit the "+" button>app>kill app>specifiy app (you'll have to do this for every single app).
alternatively, you could do:
new task>name it whatever>hit the "+" button>script>run shell> type a command that kills all apps, and check "use root". i dont know what command can be used to kill all apps though, lol, so...
naiku said:
I recently picked up Tasker, and so am trying to figure my way around how to use it for my in-car install. However, I can't seem to figure out, what is probably the most important piece, getting the screen to switch off / airplane mode to switch on when I remove power. I have installed Secure Settings plug in, but everything I have tried so far to get the screen to switch off has failed. I am sure I am missing something simple here.
Click to expand...
Click to collapse
Exit task. And what you want is Display->Lock to switch off the screen. As for Airplane mode, I believe that does require Secure Settings to toggle, but that should be pretty easy. Assuming you're rooted and the Secure Settings Helper is installed (see its app) directly.
naiku said:
Also, is there a way to have Tasker kill all open apps, instead of having to individually list apps?
Click to expand...
Click to collapse
This is dumb. That's all I'm going to say about this subject.
Thanks for the replies, I am rooted and do have Secure Settings installed, I will have to look into Airplane mode some more as I don't see it listed under the Secure Settings addon.
Is there a good guide anywhere for Tasker? I tried via their site, but most of the links were dead. When I connect power to the Nexus, Bluetooth comes on, but I also want it to use my phone for internet access (Settings -> Bluetooth - Paired Devices - Use for internet access). It seems like everytime Bluetooth goes off, that box becomes unchecked, and currently I hvae to manually go in and check it again. I am guessing I need a script to do that, but I have no clue how to write a script to do so, and can't find much by the way of help / tutorials (I admit though, I am at work, and have not spent a huge amount of time searching).
naiku said:
Thanks for the replies, I am rooted and do have Secure Settings installed, I will have to look into Airplane mode some more as I don't see it listed under the Secure Settings addon.
Is there a good guide anywhere for Tasker? I tried via their site, but most of the links were dead. When I connect power to the Nexus, Bluetooth comes on, but I also want it to use my phone for internet access (Settings -> Bluetooth - Paired Devices - Use for internet access). It seems like everytime Bluetooth goes off, that box becomes unchecked, and currently I hvae to manually go in and check it again. I am guessing I need a script to do that, but I have no clue how to write a script to do so, and can't find much by the way of help / tutorials (I admit though, I am at work, and have not spent a huge amount of time searching).
Click to expand...
Click to collapse
Tasker google groups is the place to go.
Make 2 profiles, 1 for power on 1 for power off. Open secure setting,the option is there to install helper.Then when you set new task select plugins,then secure setting that will appear now that helper is installed.Airplane mode is there.As for screen on and off, set screen off 23 hours 59 mins under power on profile , set screen off 7secs(minimum) under power off.
The other 2 profiles are timed according to daylight so the brightness decreases at night increases in the day.I wouldnt use the kill app function it doesnt play nicely and causes some crashing issues at shutdown thats why mine are disabled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
main profiles
power off proflie
power on profile
secure settings with helper installed
Sent from my SGH-I927 using xda app-developers app
Right now I have an unlocked device XAA on t mobile network. I enabled video calling RCS, VOLTE, wifi calling but I cant figure out to enable enhanced messaging(Read/Delivered notification under your texts in messaging). Is this possible to enable on the unlocked firmware?
black96ss said:
Using unlocked device with t mobile sim. I enabled the volte, wifi calling, video calling rcs. I was wondering if it's possible to enable enhanced messaging (read/delivered notifications under the texts in messaginf)
Click to expand...
Click to collapse
Not sure, but you can try using my cscfeatures.xml here....
https://forum.xda-developers.com/tmobile-galaxy-note-8/how-to/carrier-carrier-root-required-t3686535
Sent from my God Mode 8
black96ss said:
Right now I have an unlocked device XAA on t mobile network. I enabled video calling RCS, VOLTE, wifi calling but I cant figure out to enable enhanced messaging(Read/Delivered notification under your texts in messaging). Is this possible to enable on the unlocked firmware?
Click to expand...
Click to collapse
.... forgot to add, you'll need to be rooted to use the cscfeatures.xml i linked you too.
Sent from my God Mode 8
black96ss said:
Right now I have an unlocked device XAA on t mobile network. I enabled video calling RCS, VOLTE, wifi calling but I cant figure out to enable enhanced messaging(Read/Delivered notification under your texts in messaging). Is this possible to enable on the unlocked firmware?
Click to expand...
Click to collapse
Hi,
I also have an unlocked version of Note8 and wondering how to get video calling RCS. Do you mind sharing?
Thanks
Trainzer said:
Hi,
I also have an unlocked version of Note8 and wondering how to get video calling RCS. Do you mind sharing?
Thanks
Click to expand...
Click to collapse
I would also like to know this as well.
Trainzer said:
Hi,
I also have an unlocked version of Note8 and wondering how to get video calling RCS. Do you mind sharing?
Thanks
Click to expand...
Click to collapse
WalkingHat said:
I would also like to know this as well.
Click to expand...
Click to collapse
Go to the play store and download an app called shortcut master(lite)
Open app
Click 3 dots in upper right hand corner and select "app explorer"
Scroll down until you see "ims settings" it has a purple icon
Scroll down to "ims launcher activity" and hit launch
Select "ims service switch"
Then make sure everything in that menu is checked on.
Go to dialer and you'll bow see the video call icon on the lower left next to the phone button
Only tested this on t mobile FYI,
black96ss said:
Go to the play store and download an app called shortcut master(lite)
Open app
Click 3 dots in upper right hand corner and select "app explorer"
Scroll down until you see "ims settings" it has a purple icon
Scroll down to "ims launcher activity" and hit launch
Select "ims service switch"
Then make sure everything in that menu is checked on.
Go to dialer and you'll bow see the video call icon on the lower left next to the phone button
Only tested this on t mobile FYI,
Click to expand...
Click to collapse
Thanks!
Thanks black96ss.
Have that already. Was actually looking for the Enriched Calling options under the dialer settings...
(attaching screen from my previous S8+)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
black96ss said:
Go to the play store and download an app called shortcut master(lite)
Open app
Click 3 dots in upper right hand corner and select "app explorer"
Scroll down until you see "ims settings" it has a purple icon
Scroll down to "ims launcher activity" and hit launch
Select "ims service switch"
Then make sure everything in that menu is checked on.
Go to dialer and you'll bow see the video call icon on the lower left next to the phone button
Only tested this on t mobile FYI,
Click to expand...
Click to collapse
Thanks!! :good:
Hi, I don't see any icon when I enable SELECT to speak on my P30 Pro.
Does anyone face the same issue? :crying:
Added screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
betiau said:
Hi, I don't see any icon when I enable tap to speak on my P30 Pro.
Does anyone face the same issue? :crying:
Click to expand...
Click to collapse
I see it on the keyboard, highlighted in the attached screenshot.. Press and hold that and it opens up Tap to speak.. Hope that helps..
MrDpak said:
I see it on the keyboard, highlighted in the attached screenshot.. Press and hold that and it opens up Tap to speak.. Hope that helps..
Click to expand...
Click to collapse
Thanks so much MrDpak!
I realized I typed the issue wrong.. it is Select to Speak in accessibility options, not Tap to Speak.
Does Select to Speak work for you too?
betiau said:
Thanks so much MrDpak!
I realized I typed the issue wrong.. it is Select to Speak in accessibility options, not Tap to Speak.
Does Select to Speak work for you too?
Click to expand...
Click to collapse
Ok found it! this made my head scratch as well..
Huawei seems to have set it up differently. If you are using Gesture navigation you would not see it. Follow the below steps to first see it and enable it before switching back to Gesture navigation.
1. Go to Settings > System > System Navigation > select Three-key Navigation
2. You will now see the little guy in the corner, click on him and you will then see the floating icon (both in attached screenshot)
3. You can now move around the floating icon and even change back to Gesture Navigation.
Do hit the Thanks button if this helped..
: )
MrDpak said:
Ok found it! this made my head scratch as well..
Huawei seems to have set it up differently. If you are using Gesture navigation you would not see it. Follow the below steps to first see it and enable it before switching back to Gesture navigation.
1. Go to Settings > System > System Navigation > select Three-key Navigation
2. You will now see the little guy in the corner, click on him and you will then see the floating icon (both in attached screenshot)
3. You can now move around the floating icon and even change back to Gesture Navigation.
Do hit the Thanks button if this helped..
: )
Click to expand...
Click to collapse
Thanks! I never would have found it if you had not pointed it out!
1 more issue I noticed though was that the feature reads everything starting from the top of my screen and ignores what I select.. In fact, when I have something selected, it reads the context menu to me 'Select all, copy, etc.' then proceeds to read from the top of my screen. Do you see the same behavior?
betiau said:
Thanks! I never would have found it if you had not pointed it out!
1 more issue I noticed though was that the feature reads everything starting from the top of my screen and ignores what I select.. In fact, when I have something selected, it reads the context menu to me 'Select all, copy, etc.' then proceeds to read from the top of my screen. Do you see the same behavior?
Click to expand...
Click to collapse
After enabling it, I just draw a rectangle over the area from which I want it to read.. In the attached screenshot it reads "Try out gestures ... Three-key navigation"
Hope that helps.
MrDpak said:
After enabling it, I just draw a rectangle over the area from which I want it to read.. In the attached screenshot it reads "Try out gestures ... Three-key navigation"
Hope that helps.
Click to expand...
Click to collapse
You are my lifesaver!
betiau said:
You are my lifesaver!
Click to expand...
Click to collapse
Lol glad to help.. : )
I just want to thank MrDpak as well; this had me totally stumpted. So , this solution also help on an Honor 20 running Magic UI.
If only it was possible to run Select to Speak without having to leave Gesture Navigation first; having finally to used to gestures, I prefer them to Three Key etc.
Oh well ... thanks again MrDpak