For years I have used SIP change to change the default keyboard however on my new Diamond it doesn't seem to work it just sets it to the default windows mobile keyboard. How is everyone else dealing with this? Are there any other ways of setting a different default?
IMSelector is available here
Boss428man said:
For years I have used SIP change to change the default keyboard however on my new Diamond it doesn't seem to work it just sets it to the default windows mobile keyboard. How is everyone else dealing with this? Are there any other ways of setting a different default?
Click to expand...
Click to collapse
You can use TouchLockPro with the embedded SIP changer.
I use SIPChange and works like a charm...
Related
I have an European version of the Kaiser/TyTnII which I loaded Remote Desktop for WM6. I connect to my VPN using this after entering through SonicWall using Sonic's Pocket GVC. When connected I find that I can't use certain keyboard keys (both screen and thumboard) and others I can only use in Caps mode. Has anyone heard of this issue?
Thanks.
I had a similar problem some time ago. I was pretty clear to me that it had something to do with the keyboard mappings which weren't identical on the Kaiser and my computer(keyboard). I have no idea if there is a better solution out there, but this is how I fixed it:
Solution: Add support for a second keyboard mapping to your OS
Go to 'Control Panel'
Go to 'Regional and Language Options'
Go to the second tab 'languages' and click on 'details'
Choose 'Add'
Add 'English (United States)' and click 'Ok'
Close the opened windows.
In the taksbar you should see now a blue button with 2 letters in it. These letters represent the keyboard mapping you are using. By clicking on it you can change the keyboard layout.
Next time when you connect via Remote Desktop with your Kaiser, use your Kaiser to change the keyboard layout by clicking on the button and altering the keyboard layout. When you're finished, just click on it again and change your keyboard layout back to the original.
Hope this helps!
Thanks, i will give that a try.
VPN to SonicWall ?
I also have a European version of the Kaiser/TyTnII with WM6 Prof and I want to connect to a SonicWall TZ170. I tried Sonicwall's Pocket GVC but I could not install in on wm6 (not supported).
Could you give me more details about how you made the vpn connection the Sonicwall?
Thanks
VPN to SonicWall
I have the same problem with my HTC Touch Diamond (WM 6.1).
I can't find a VPN client. The one I tried only works with Windows CE Pocket PC 2003.
Anyone has found a solution to the problem?
Thanks
I was wondering if anyone has the same problem as I do. I am using ROM 1.34.8831.1 WWE and my word completion and word correction does not work.
I have tried START/SETTINGS/INPUT/WORD COMPLETION. but it changes nothing.
Comments or suggestions please..
Thanks
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Keyboard
dutch64 said:
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Click to expand...
Click to collapse
I am using the MS keyboard. I will try your other suggestion. Thx
update your ancient rom.
billybobjones said:
update your ancient rom.
Click to expand...
Click to collapse
I am now using a modern ROM and it still does not work... any other suggestions
word completion with block recognizer
Hi
HTC in Australia) support clearly advise that word completion will not work on Touch Diamond when using block recognizer.
Is there anybody out there that can add this feature to the Touch Diamond - even if it is not available on other input methods?
Word completion does work for block recognizer, do as dutch64 mentioned.
Strange...i have exactly the oposite problem
i don't like word completion feature, and so i try all ways to disable it (from settings menu and from Advanc. conf. tool), but i only get it 100% disabled when i use Panosha ROMs ...
Hi all, just got the diamond last week, damn its nice, just the battery life sucks.
I used to own a UK T-Mobile Mda 3, loved the calender as i change shifts a lot, was looking to replace it a few months back heard tell of the diamond so decided to wait.......however...
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
also, is there a website that lists all the compatible 6.1 programs? not sure what i want, but more like teeter would be nice, or even a different sms prog that allows predictive text!!
Cheers
Lepak
lepaknerat said:
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
Lepak
Click to expand...
Click to collapse
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
unvisigoth said:
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
Click to expand...
Click to collapse
Found it ! Thanks to newtonmj in modaco forum
You must chaange the registry key XT9SupportMSSip in HKLM\SOFTWARE\Tegic\eT9\ from '0' to '1'.
This allows the predictive text to work correctly in standard keyboard too.
I don't know if this mod can "damage" other settings but I don't think. It allows the predictive input to work using microsoft standard keyboard. In my device now works !
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
Click to expand...
Click to collapse
Very nice. I think I'll try it. But I wanted that worked correctly standard keyboard without adding third part software. What is standard in my device MUST work correctly. Then perhaps I'll not use it, but this is another thing
I'm paranoic. But I can't accept that a phone worth about 500€ does't go in the appropriate way......
i use spb full keyboard in my HD and i had problem with an issue of device(in any rom) that didn't takes any registry setting for other keyboard set as default..in this circumstance windows sets as default the ""keyboard"" overpassing all other keyboards installed in device...
so i use this version
http://rapidshare.com/files/189187840/sipchange_HD.rar
of sipchange and i put ""indial delay"" in 30"...
so after each softreset sipchange stays open little more time than windows needs to set oem keyboard as default and assign my keyboard(any kbrd i like) as default for good
i don't know if is usefull for anybody but for people who like an other kbrd as default and they don't like to set it allways manually....this is a solution.
Hi, it worked, thank you so much.
nice one! ;-)
zaharakis said:
i use spb full keyboard in my HD and i had problem with an issue of device(in any rom) that didn't takes any registry setting for other keyboard set as default..in this circumstance windows sets as default the ""keyboard"" overpassing all other keyboards installed in device...
so i use this version
http://rapidshare.com/files/189187840/sipchange_HD.rar
of sipchange and i put ""indial delay"" in 30"...
so after each softreset sipchange stays open little more time than windows needs to set oem keyboard as default and assign my keyboard(any kbrd i like) as default for good
i don't know if is usefull for anybody but for people who like an other kbrd as default and they don't like to set it allways manually....this is a solution.
Click to expand...
Click to collapse
I'd say it would be worthwhile sending this solution to HTC, it's their bug after all...
Why can't _they_ fix their own bugs?
Hi all,
I would like to know how to add a new input/keyboard language on a Kaiser...
I would especially need the french language to be available on my Kaiser, will installing this file "t9 french.cab" would work? Will it mess up the actual english xT9 settings?
Thank you all for your time and support,
highmighty
highmighty said:
Hi all,
I would like to know how to add a new input/keyboard language on a Kaiser...
I would especially need the french language to be available on my Kaiser, will installing this file "t9 french.cab" would work? Will it mess up the actual english xT9 settings?
Thank you all for your time and support,
highmighty
Click to expand...
Click to collapse
This french T9 ..! for more details or tutorial to change the language go to http://melgurth.ovh.org/index.php?page=rg
hope this help you
Hi all,
I installed "T9 French.cab" but it doesn't seem to work, I still haven't found a way to type those special french characters like "é, à, è", how can I do that?
Does xT9 uses the same files as T9? Make note that I installed "T9 French.cab" and NOT "xT9 French.cab", could it be the problem? If so, is there such an "xT9 french.cab" file available?
Unfortunately, while I was playing with the language/keyboard options on my HTC Kaiser (w/ slide-out qwerty keyboard), something else got messed up and let me try to explain it:
I do have several options regarding the input type: Block Recognizer, Keyboard, Letter Recognizer or Touch Input. I honestly prefer using the "Touch Input" way which still works fine in Portrait mode but the problem is within the Landscape mode... the keyboard is no longer in full screen size, it stays in a smaller size, more intented for the Portrait mode, have a look at the attached screenshot.
How to repair/restore the Touch Input settings?
Thank you all for your time and support,
highmighty
highmighty said:
Hi all,
I installed "T9 French.cab" but it doesn't seem to work, I still haven't found a way to type those special french characters like "é, à, è", how can I do that?
Does xT9 uses the same files as T9? Make note that I installed "T9 French.cab" and NOT "xT9 French.cab", could it be the problem? If so, is there such an "xT9 french.cab" file available?
Unfortunately, while I was playing with the language/keyboard options on my HTC Kaiser (w/ slide-out qwerty keyboard), something else got messed up and let me try to explain it:
I do have several options regarding the input type: Block Recognizer, Keyboard, Letter Recognizer or Touch Input. I honestly prefer using the "Touch Input" way which still works fine in Portrait mode but the problem is within the Landscape mode... the keyboard is no longer in full screen size, it stays in a smaller size, more intented for the Portrait mode, have a look at the attached screenshot.
How to repair/restore the Touch Input settings?
Thank you all for your time and support,
highmighty
Click to expand...
Click to collapse
use HTC TouchScreen original.cab to restore your default settings of keyboard