[Q] How to add a new input/keyboard language on Kaiser? - Tilt, TyTN II, MDA Vario III General

Hi all,
I would like to know how to add a new input/keyboard language on a Kaiser...
I would especially need the french language to be available on my Kaiser, will installing this file "t9 french.cab" would work? Will it mess up the actual english xT9 settings?
Thank you all for your time and support,
highmighty

highmighty said:
Hi all,
I would like to know how to add a new input/keyboard language on a Kaiser...
I would especially need the french language to be available on my Kaiser, will installing this file "t9 french.cab" would work? Will it mess up the actual english xT9 settings?
Thank you all for your time and support,
highmighty
Click to expand...
Click to collapse
This french T9 ..! for more details or tutorial to change the language go to http://melgurth.ovh.org/index.php?page=rg
hope this help you

Hi all,
I installed "T9 French.cab" but it doesn't seem to work, I still haven't found a way to type those special french characters like "é, à, è", how can I do that?
Does xT9 uses the same files as T9? Make note that I installed "T9 French.cab" and NOT "xT9 French.cab", could it be the problem? If so, is there such an "xT9 french.cab" file available?
Unfortunately, while I was playing with the language/keyboard options on my HTC Kaiser (w/ slide-out qwerty keyboard), something else got messed up and let me try to explain it:
I do have several options regarding the input type: Block Recognizer, Keyboard, Letter Recognizer or Touch Input. I honestly prefer using the "Touch Input" way which still works fine in Portrait mode but the problem is within the Landscape mode... the keyboard is no longer in full screen size, it stays in a smaller size, more intented for the Portrait mode, have a look at the attached screenshot.
How to repair/restore the Touch Input settings?
Thank you all for your time and support,
highmighty

highmighty said:
Hi all,
I installed "T9 French.cab" but it doesn't seem to work, I still haven't found a way to type those special french characters like "é, à, è", how can I do that?
Does xT9 uses the same files as T9? Make note that I installed "T9 French.cab" and NOT "xT9 French.cab", could it be the problem? If so, is there such an "xT9 french.cab" file available?
Unfortunately, while I was playing with the language/keyboard options on my HTC Kaiser (w/ slide-out qwerty keyboard), something else got messed up and let me try to explain it:
I do have several options regarding the input type: Block Recognizer, Keyboard, Letter Recognizer or Touch Input. I honestly prefer using the "Touch Input" way which still works fine in Portrait mode but the problem is within the Landscape mode... the keyboard is no longer in full screen size, it stays in a smaller size, more intented for the Portrait mode, have a look at the attached screenshot.
How to repair/restore the Touch Input settings?
Thank you all for your time and support,
highmighty
Click to expand...
Click to collapse
use HTC TouchScreen original.cab to restore your default settings of keyboard

Related

Word suggestion doesn't appear in any keyboard - please advice

I love (so far) my HTC Diamond but there is one pretty annoying problem. It seems I cannot get word suggestions while typing and this is for any keyboard type.
Any ideas?
Same problem in the IPAQ 614c
I am having the same problem on my IPAQ 614c. I installed this file to disable to XT9 option but it did not help. It may work for you. I would love to get an answer to my problem. Many thanks.
Jay
Could you please post a link to the discussion where this file is described?
Have you played around with the T9 settings?
Start/settings/input/ (check the word completion tab here and choose your options)
Go back to unput method tab
Have compact Qwerty in the window/Options/T9 settings
unfortunately this doesn't work.
keyboard
The best is TouchPal 3.0
correction, I'm speaking about default WM keyboard not about HTC one.
Ok, do you have a Word Completion tab in your input settings?
If so, which options have you chosen?
I have tick Suggest word when entering text
Suggest after entering 4 letters
Suggest 4 words
Tick in Add space after word
Tick in Enable Auto Correct.
I'm sorry, I was wrong, I just tried this out myself, and mine isn't working either. I've never used the normal keyboard before, as it's so small, but it seems like having the Touch keyboards stops that word suggestion happening in normal keyboard. My apologies.
There seems to be a solution to this problem here: PocketCM Keyboard. Good luck! I have tried it and it works great. Awesome!
This Should Work

Keyboard layout and T9 function

Hi all, just got the diamond last week, damn its nice, just the battery life sucks.
I used to own a UK T-Mobile Mda 3, loved the calender as i change shifts a lot, was looking to replace it a few months back heard tell of the diamond so decided to wait.......however...
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
also, is there a website that lists all the compatible 6.1 programs? not sure what i want, but more like teeter would be nice, or even a different sms prog that allows predictive text!!
Cheers
Lepak
lepaknerat said:
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
Lepak
Click to expand...
Click to collapse
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
unvisigoth said:
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
Click to expand...
Click to collapse
Found it ! Thanks to newtonmj in modaco forum
You must chaange the registry key XT9SupportMSSip in HKLM\SOFTWARE\Tegic\eT9\ from '0' to '1'.
This allows the predictive text to work correctly in standard keyboard too.
I don't know if this mod can "damage" other settings but I don't think. It allows the predictive input to work using microsoft standard keyboard. In my device now works !
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
Click to expand...
Click to collapse
Very nice. I think I'll try it. But I wanted that worked correctly standard keyboard without adding third part software. What is standard in my device MUST work correctly. Then perhaps I'll not use it, but this is another thing
I'm paranoic. But I can't accept that a phone worth about 500€ does't go in the appropriate way......

Russian (cyrillic) Keyboard

Hello,
i just got my HTC diamond, using it in french !
I need to send sms in CYRILLIC as i did with my Sony w880i (just choosing the language while writing sms)
Is it possible to activate a russian keyboard in sms menu, and also to add a cyrillic alphabet in word for example !?
I'm looking for it on the forum, but i didn't find yet any topic about this specific request...
Thank you very much for help !!!!!
Russian input
It''s only a standart VGA keyboard russification. Enjoy
Installation !?
Thanks for the file...
But after i installed it, it seems that i still can't choose the russian keyboard
I still have my standard ones (french, spanish, italian, english and german)
I found a solution !!!
For the ones who are interested... page 4, rus2.cab to install on diamond, and it works fine
http://forum.xda-developers.com/showthread.php?t=402121
Golubev, Super I like this tool . Would be nice to have possibilities to recognize russian handwritten font as it done for German.
Many thanks!
try www.cliquick.com
Golubev said:
It''s only a standart VGA keyboard russification. Enjoy
Click to expand...
Click to collapse
thank you nice looking keyboard
Sms in Russian
I tried to install in my HTC Touch Diamond several different keybord in order to be able to write sms in russian/cyrillic. All of them are perfectly working, with outocomplete words,....
But my problem is that when I send the sms to another mobile, my text cannot be recognised: all the letters will become "?". Is this because my Diamond is in Italian and can't recognize cyrillic caracters?
Can anyone help me to solve this problem? I need to write Sms in Russian.
Thanks in advance
rubamazzo said:
I tried to install in my HTC Touch Diamond several different keybord in order to be able to write sms in russian/cyrillic. All of them are perfectly working, with outocomplete words,....
But my problem is that when I send the sms to another mobile, my text cannot be recognised: all the letters will become "?". Is this because my Diamond is in Italian and can't recognize cyrillic caracters?
Can anyone help me to solve this problem? I need to write Sms in Russian.
Thanks in advance
Click to expand...
Click to collapse
I believe that another phone should support Russian, this is often problem.
cheers
So you think that there's no chance to write sms in cyrillic from my HTC Diamond? But I'm sure that exist the russian version of this mobile. Why can't it recognize cyrillic?
You can try Microinvest Micron 2.5 keyboard. It's free and supports cyrillic keyboards (russian and bulgarian) as well as the standard english layout. It comes in two distinct versions (which are actually separate installations):
Standard - with the size ot standard input panel and
Touch - specially suited for finger typing.
It also has support for VGA displays (such as the Touch Diamond).
You can choose among 4 integrated skins (i like Vista best). More info here:
http://www.microinvest.net/en/?LoadPage=micron.php
Or download directly from here:
http://www.microinvest.net/en/getproduct.php?ProductID=12
russian keyboard
I just got my HTC Touch Pro
I'm trying to instal russian keyboard. I downloaded rus2tp.cab drag the file into memory and hit instal. What do i do next? I still can only see english keyboard

Diamond Keyboard problem

Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?

HELP: ENABLING Block Recognizer in input menu?

Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
gnarolibero said:
Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
Click to expand...
Click to collapse
I have a cab (thanks to !Aman!). You can get block recog.cab from my Topaz File Mirror.
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
"]!Aman![/URL]). You can get block recog.cab from my Topaz File Mirror.[/QUOTE]
gnarolibero said:
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
Click to expand...
Click to collapse
strange it works for me on WM 6.1
what ROM are you using it for?
BeeGee_Tokyo said:
strange it works for me on WM 6.1
what ROM are you using it for?
Click to expand...
Click to collapse
I'm trying to get the Block recognizer too.
It seems to me that Microsoft blocked it in WM 6.5
EzInput 2.1 doesnt support old SIP methods like block recongniser, thats why it doesnt work for you guys.
!Aman! said:
EzInput 2.1 doesn't support old SIP methods like block recognizer, that's why it doesn't work for you guys.
Click to expand...
Click to collapse
Hey Aman, but at Microsoft WebPage, they talk about the input methods for WM 6.5 and Block/Letter Recognize are there !!!!!!!
I though that the nes versions of cooked ROM's would be able to have then too.
Finally working BR and LR
Originally Posted by NothingBetterToDo
So sorry for keeping you guys waiting. The following are the steps I took based on my memory.
To enable the Letter Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSipInputMethod
"Default"="1" – Enabled
To enable the Block Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSipInputMethod
"Default"="1" – Enabled
You will notice that this will not make the SIP appear, for example, in your SMS application. However, it should appear in the pulldown menu at Start->Settings->Personal->Input. Now, if you try to set the Letter Recognizer as default, thinking that it will appear in SMS application, it doesn't. For some reason, it will always default back to the Touch Input (or EzInput) SIP.
So, the next step is to make the Letter Recognizer SIP the default. To do that, check the value at
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
It should be "0654897B-B359-473F-B28B-D85CF601C57F" (for Touch Input SIP). Replace that with
"42429690-AE04-11D0-A4F8-00AA00A749B9" (for Letter Recognizer SIP).
WARNING -- very very important to make sure the above is entered correctly. According to some posts elsewhere, a non existent SIP can crash your device. You might want to confirm if you have the Letter Recognizer SIP by searching for the msim.dll file. If it exists, I suppose it is probably safe.
After soft reset (power on/off device), you should now see the Letter Recognizer in your SMS application. However, you will also notice it doesn't work properly. For eg, the Capital Letter (left panel) doesn't work, there is this irritating word suggestions thing that keep popping up, it is quite slow and quite inaccurate, the Help doesn't work well.
To resolve these problems, set the following to 1:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip\IsOtherSip
Do a soft reset and the problems should disappear and you have a good Letter Recognizer to work with (even with fingernail), save for the following problems:
a. Sometimes response may not be very good. Can be quite slow especially if you are entering letters like "i", "r". Maybe this is because of the screen sensitivity.
b. If you click on the little triangle and want to switch to the Touch Input SIP, you can. But the problem is that you can't switch back to the Letter Recognizer anymore unless you do a soft reset. I guess this is OK if you use Letter Recognizer exclusively, but if you want the Chinese Handwriting feature in Touch Input (which is pretty good IMO), then it is not good.
Sorry for the long post. Thought it is better to also share my observations. I am a newbie with registry thing, so I prefer to do step by step and hence many soft resets. If you are gungho enough, just do the steps in bold followed by a soft reset. Hope it works for all you guys.
Note -- if you don't feel safe doing the registry changes, an alternative is to use the Touch Input SIP but set the waiting time to the shortest possible which will reduce the delay. But it is still very irritating to use IMHO.
Cheers
Just to remember all that the solution I described at the previous post is not mine and was Originally Posted by NothingBetterToDo. So, many thnaks to him for the great solution !!!!!!
Info for the ones that doesnt have en version
Hi
Info to all of you with other language then english.
The file msim.dll are country specific, in sweden its called msimsw.dll so i guess you will be able to find your version if you search the registry for msmi and then you will find a msmiXX.dll that is the correct one for your country.
I hade to add the info for {42429690-AE04-11D0-A4F8-00AA00A749B9} and {42429691-ae04-11d0-a4f8-00aa00a749b9} because it was missing info so it's not enought to only change the IsSipInputMethod to 1.
I have attached the files i used, but plz realise that this one is for swedish a version. You can edit the files with notepad to adress the localized .dll file for your country.
After this to be able to use the input methods i did what nicksalgado said and change
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
to {42429691-ae04-11d0-a4f8-00aa00a749b9} to use Block recognizer as default im
/SebulbaSe
Hi
I have the "RUU_Topaz_S_HTC_SPA_2.16.412.1_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship", and has the same problem that you describe. I use the HTC Pure from AT&T, and in the original AT&T ROM the Block Recognizer work it just fine. Is there a way to captura a cab to use to solve this problem from the original AT&T Rom?? Regards
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
yulbeast said:
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
Click to expand...
Click to collapse
Use this app to choose your SIP.
Activation of the Letter/Block Recognizer cookbook
Hi all
thanks, it works perfectly on my Topaz.
How to desactivate properly and completely block recognizer (register and so on) of my Topaz now, because I want tu use the SPB Back Up of my Topaz on my Touch2..and I am sure I will Have some problems with this change..?
Thanks
It's not a good idea to use a full backup file from one device to a different one.

Categories

Resources