I have skipping music during audio playback. To say there is no any regularity in that, but mostly it happends when I use Bt handsfree SE HBH-DS970.
I use Core-player to playback MP3 files.
Suddenly I saw the fix for that problem but only for HTC Touch Diamond. Is there any similar fix for Kaiser?
Thank you!
I have the same problem when I use pocket player and bluetooth. I thought that it was a BT problem, but I have seen the same behavior when it is not connected to Bluetooth. Maybe memory or too many processes.
Don't think so, because there is no other processes in back except Coreplayer.. I tried to change buffer size - no result... Also it happends not only with BT headphones..
Really don't know what to do...
Related
Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....
Having Bluetooth "Handsfree" and A2DP connected at same time causing severe skipping
Hi....I know there are a lot of posts regarding skipping while playing MP3s over A2DP. My problem is perhaps a little bit different because I've narrowed my problem down to the handsfree bluetooth service.
Here's my situation with my unlocked HTC TyTN II using the stock HTC ROM and with no registiry modifications (bitpool, etc)
If I have only A2DP connected and streaming music to an external bluetooth receiver the MP3 playback is flawless. It sounds fantastic. I've tried Windows Media Player, PocketMusic, and PocketPlayer and they all work just great.
However, when I turn on my handsfree headset (which is a separate device from my A2DP receiver) and allow it to connect to my TyTN II, extreme stuttering immediately occurs through the A2DP music stream. When I shut off my handsfree headset the stuttering stops and the music stream returns to its usual fantastic sound. The problem can be replicated also by leaving the handsfree headset powered ON and simply enabling handsfree service on the HTC TyTN II to cause the stuttering to begin. The stuttering stops immediately when handsfree service is subsequently disabled.
Anyone else out their experience this? Any suggestions? For the time being I have to resort to disabling handsfree when streaming music to my A2DP bluetooth receiver.
Skipping/Cutting out/Speeding Up/Slowing down
Not much to add other than 'Me Too!' and thanks for tracking this down since i thought i was going nuts since I've had a couple of times where i thought i had it resolved only for it to crop up again.
Are you also experiencing your A2DP audio speeding up and slowing down along with the audio cutting out? since to me that is the most bizarre of all of the audio freakery going on.
I found my Logitech handsfree less likely to cause cut outs when on than my Jawbone does. but neither were trouble free.
Just an update for those that may experience the same problem as me. I've noticed that sometimes I have perfect audio even though I am connected to my handsfree car system while streaming music via A2DP. So this leads me to believe that bitpool settings and such are not the issue...since the perfect audio can occur with the default settings. I have also heard in other threads that flashing a new radio may help...but haven't gone to that measure yet.
What I have been able to determine is that this horrible skipping/stuttering occurs when my phone is changing cell phone towers.
That is, if
1) Streaming audio over bluetooth via A2DP
AND
2) Tytn II also connected to a handsfree device
then A2DP skips horribly when the phone needs to switch cell towers.
I have confirmed this by using the program PhoneAlarm to log the cell phone towers my phone is connected to. My A2DP stuttering/skipping problem coincides with every change in cell phone tower.
Now having said all this there is still one other factor that plays into it that I haven't quite figured out. If I soft reset my device and then immediately connect to my car and A2DP stereo then I do not get the stuttering problem when changing cell phone towers. However if I spend the day using the device, active-syncing and such at work, then on the drive home I will ALWAYS get the stuttering during every cell phone tower hand-over.
Frustrating. Anyway...hopefully I'll eventually figure out the last piece of the puzzle. I would rather not have to soft reset every time I get in my car just so that I can get good audio.
--------------------------------------------------------------------------------
hondophred said:
Are you also experiencing your A2DP audio speeding up and slowing down along with the audio cutting out? since to me that is the most bizarre of all of the audio freakery going on.
Click to expand...
Click to collapse
I do recall getting this behaviour when using Windows Media player...but I have started using the new Pocket Player and have since never experienced the audio slow down problem.
I found a work-around that works for me. It's posted here:
http://forum.xda-developers.com/showthread.php?p=1990783#post1990783
Yet another A2DP skipping problem
Rumball said:
I do recall getting this behaviour when using Windows Media player...but I have started using the new Pocket Player and have since never experienced the audio slow down problem.
Click to expand...
Click to collapse
I seem to have related but a different problem with skipping.
I have both Sony and goldlantern BT headphones which i tried (stereo profile).
Both severely skip audio when located on the left side of my belt. Silly but the reception/skipping problems improves a GREAT deal when i move it to the right side. It works flawlessly inside of the building where i have no phone signal but outside -- it skips horribly, even worse after 6.1rom upgrade.
Can anyone confirm that the BT signal going through the body worsens skipping? If so, I assume the signal strength/BT/wireless channel may be at fault, not the tower switching as for me, it happens even when I stay stationary.
Any help is GREATLY APPRECIATED!
TILT - R2 VEGA WM6.1 CE OS 5.2.19209 (Build 19209.1.0.2) ROM
I think part of the problem can be the A2DP device as well. I had a pair ofr HT 820 older bluetooth headsets with A2DP that were skipping and annoying. I went out and bought some s9s and the problem went away. I figured just for a test I would try the HT820 out again, still skipping. So for me it was not the phone but the A2DP device.
jallenclark said:
I think part of the problem can be the A2DP device as well. I had a pair ofr HT 820 older bluetooth headsets with A2DP that were skipping and annoying. I went out and bought some s9s and the problem went away. I figured just for a test I would try the HT820 out again, still skipping. So for me it was not the phone but the A2DP device.
Click to expand...
Click to collapse
i thought that too but i have two different headsets from two different manufacturers, both are skipping the same...
A2DP requires a lot of the bandwidth Bluetooth can provide. Having a 2nd connection open simply exceeds what the Bluetooth chip can handle, no surprise in that. If the BT headset keeps the connection open it's very likely to happen.
kilrah said:
A2DP requires a lot of the bandwidth Bluetooth can provide. Having a 2nd connection open simply exceeds what the Bluetooth chip can handle, no surprise in that. If the BT headset keeps the connection open it's very likely to happen.
Click to expand...
Click to collapse
what do you mean by a SECOND CONNECTION?
i have 2 different headsets because i thought that i have a poor headset, but both work similarly bad, which makes me think it is the tilt, not the headphones. i do not have 2 connections, never has it and not even sure if it is possible....
Lowering of bitrate did not help at all.....
Anyone have experienced these problems? anyone is using BT headset besides motorola s9?
On mine it does it when it picks up a wi-fi hotspot. When I'm driving the wi-fi is on when the screen is and whenever I pass a hot spot it drops out. Turning the wi-fi off solved it. Don't know if it does it with cell towers.
gs465 said:
what do you mean by a SECOND CONNECTION?
Click to expand...
Click to collapse
The thread was initially about skipping when BOTH an A2DP stereo headset AND a BT handsfree were connected at the same time, as the title shows. I was commenting on that.
Other than this, when I want to listen to music I can leave the Kaiser in my room and walk around in my entire flat with the headphones on without skipping (around 10-15m straight line, with some walls).
However, Wifi must not be active and communicating, otherwise either / both of them will drop. If I'm using Wifi and start streaming audio via A2DP, the wifi will slow down a lot and sometimes disconnect. In the same way if Wifi is communicating the audio will skip. If both of them are active but one is idle everything's fine. But that's also normal as both share the same frequencies and will step on each other. When usage is low it's not noticeable but when both are using a lot of bandwidth then they will disturb each other.
The cell radio doesn't seem to cause any problems for me.
Hi folks,
I got a big problem with my Diamond, maybe some of you have a solution!
After a while all audio players got a thin compressed sound! After a hard reset it's gone, but after a while there is the same problem again!
It's just all players, fm radio works fine! I've installed coreplayer and with windows mediaplayer there it's just the same!
It's just on the headphone connection, bluetooth stereo headset works fine!
Has anyone an idea?
I think there are known problems with the audio boosting system. Try disabling it (if you can't work out how to do that, search the forum).
solution!?
Today I just experienced the same and thought my precious had gone bad = (
I also have coreplayer installed and just noticed that I have activated the equalizer function for both coreplayer and the touchflo (WM) player. I deactivated one and the sound was normal again...pheeew = )
I use SRS WOW and coreplayer, and it works perfect. Only problem I see is that I have to set the volume in the coreplayer program quite low, otherwise, I loose all the bass.
I am having a bit of difficulty with my XDA Ignito on O2 in the UK (which is basically a rebranded HTC Diamond), and I am just wanting to know if anyone else has had similar issues.
Using the Touchflo music player interface, the device will connect without a problem, however after the first track ends the bluetooth connection drops as the music player produces an Audiomanager.exe fault. I have to then re-select the music player and it will allow me to play another track but the same thing happens at the end of the track. Interestingly the Windows Media Player does exactly the same thing, dropping the bluetooth connection after one track and producing a wmplayer.exe fault.
I have tried installing a third party music player, Coreplayer with the result that it will play more than one track in a row and does not produce a fault of any kind, however the Parrot remote control does not advance or retard the tracks, or pause or restart the tracks.
I want to try to work out whether the fault lies with the Phone, the Phone software, or the Parrot carkit.
Any help would be much appreciated.
hi peeps,
ive seached everywhere to look for an answer to this but couldnt solve it, so im finally asking the pros on here.
i have a milestone, rooted, 550mhz overclocked to 1gb 56vsl. firmware 2.1
anyways, i got the jabra 3030 bluetooth connector.
my issue is i like to use the excellent new audible app on my phone, anyways when i hit the play button on the bluetooth connection it will pause the audible app as its suppose to then starts the internal media player.
i dont use the internal media player on my machine, i have a few mp3 tracks that are used as ring tones and some podcasts. is there anyway to disable or stop the bluetooth connection turning on the media player?
the same thing happens when i also use my podcast catcher (doggcatchya).
I dont like the internal android player and wouldnt miss it if i could remove the program.
can anyone help as its driving me crazy, and really defeats the point of having a bluetooth media controller, i have to get my phone out everytime now to stop the media player.
thanks
roy