Big Audio Problem! - Touch Diamond, MDA Compact IV General

Hi folks,
I got a big problem with my Diamond, maybe some of you have a solution!
After a while all audio players got a thin compressed sound! After a hard reset it's gone, but after a while there is the same problem again!
It's just all players, fm radio works fine! I've installed coreplayer and with windows mediaplayer there it's just the same!
It's just on the headphone connection, bluetooth stereo headset works fine!
Has anyone an idea?

I think there are known problems with the audio boosting system. Try disabling it (if you can't work out how to do that, search the forum).

solution!?
Today I just experienced the same and thought my precious had gone bad = (
I also have coreplayer installed and just noticed that I have activated the equalizer function for both coreplayer and the touchflo (WM) player. I deactivated one and the sound was normal again...pheeew = )

I use SRS WOW and coreplayer, and it works perfect. Only problem I see is that I have to set the volume in the coreplayer program quite low, otherwise, I loose all the bass.

Related

It's flat!

yes...I'm speaking about the quality of sound while listening an mp3 through the headphones. The sound is really flat without basses or medium frequencies. Even using a better quality headphones the result is always the same: very poor audio quality. It sucks! ...and did you notice that every time you tap on the screen the click that it produces is preceded by a "zack" as happens when an ampli is badly turned on. Listen it carefully and compare with another pda (mine was the artemis).
IPK
Hi,
I am using a B&O stereo headset and installed PocketMusic and it sounds great
pe747 said:
Hi,
I am using a B&O stereo headset and installed PocketMusic and it sounds great
Click to expand...
Click to collapse
The same here but I'm using Ethymotic Isolator stereo headset and fit4cat utility to hack A2DP reg.
re: flat sound
I have quite a few earphones & their sounds all vary when using it on the D810. If you like a bit of bass & good mid-range
I recommend the Creative CP630. I suspect Seinnheisers CX300 would be the same.
I too found adjusting a2dp with Fit4cat made a difference in sound quality.
I bought the Sony MDR-EX90 recently that sound fantastic on my home stereo, but sounded very flat on the D810.
@ Ipnotik : worth trying out a different pair of earphones. Dopods may not be the best mp3 players, but hopefully you get to find a good headphone combo which sounds bearable.
Oh & try Mortplayer as it has an equalizer .
You have two choices (I have tested both):
pocket player + ipaqaudio.exe
or
TCPMP equalizer or gsplayer
flashmp3 said:
You have two choices (I have tested both):
pocket player + ipaqaudio.exe
or
TCPMP equalizer or gsplayer
Click to expand...
Click to collapse
What's ipaqaudio.exe? Where to find it? What's for? Does it work on P3600?
Ipaqaudio can be found on this forum just make a search
It is an equalizer hardware change originally made for ipaq but it works on my P3600 and the only thing a noticed is that it sometime reset when I change sound.But exceps that It works fine!
It is great to have a hardware equalizer
flashmp3 said:
Ipaqaudio can be found on this forum just make a search
It is an equalizer hardware change originally made for ipaq but it works on my P3600 and the only thing a noticed is that it sometime reset when I change sound.But exceps that It works fine!
It is great to have a hardware equalizer
Click to expand...
Click to collapse
Thanks, I found it...but it seems that to have it working you must have wired headset connected...did you try it with BT headset?
I use an htc tytn usb to jack converter bought in france (mobidistrib)
You can find the trinity one (it is the same) on expansys.

Audio-Playback in Audiomanager and TCMP is silent on headset and speaker

Hi,
since a few days, I have no audio in videos and mp3 playback with mediaplayer,tcmp,audiomanager etc.
Speaker and headphone works perfect in phonecalls and with ringtones.
Its solved. I had installed "Bt audio" one day, it didn't work. But it seems that it made the mess and after deinstalling it, I have ears again.

Crappy sound with bluetooth earphones.

I'm using Jabra 3030 and I'm getting really crappy sound. If I use the standard earphones, everything sounds great.
I read somewhere that an alternative music player would solve the problem, but nope. Sounds just as bad.
Has this got anything to do with audio booster?
Is there a walkaround to this problem?
Isn't there anyone who has a solution to this problem?
I bought a Jabra 3030 this saturday: Getting it exchanged due to excessive background noise.
It is noise you have too? If so, there is nothing wrong with the phone, its the crappy 3030 as other phones and even a laptop does the same. I've tested with a DS-200 and it sounds as good as wired buds.
There are some registry tweaks that greatly improve BT audio.
Under HKLM\Software\ Microsoft\Bluetooth \A2DP\Settings , remove the "MaxSupportedBitPool" and "BitPool" entries.
As usual, don't touch your registry if you are not sure, and keep a backup just in case...
http://www.pocketpcmag.com/cms/blogs/3/wm6_aamp_microsoft_bluetooth_a2dp_stereo
No, i think it's the lack of bass that makes the sound so bad.
That's why I thought of audio booster.
When I'm watching movies the sound is ok, but my metal sounds blah.
I don't think the problem lies in the Jabra device.
Renewing topi. Does anybody have any idea how to enable AudioBooster on BT headphones? It is disabled unless you connect normal headphones. Hopefully there is an option in reg somwhere to do it....
Why not just try a player that has a built in pre-amp????
- CorePlayer
- SRS WOW
That would solve your problem - if lack of bass is the problem. At least it would be a good (and quick) test.

Music player and A2DP

Hi all,
First of all, I have searched a lot but could not find an answer to my question -- if it has already been posted then my apologies.
I have a strange problem. I listen to music via A2DP using the TF3D music player. Everything works fine until I stop listening and switch off my headset. If I then want to listen to music again and switch on my headset, I can't hear anything (either through the headset or the phone speaker) despite the music being played by the player until I soft reset the device and start again, when everything works fine! I have now got a new device for my car (again using A2DP) and have exactly the same problem.
I don't really want to get another music player because the default player serves my purpose just fine.
Any suggestions?
Thanks a bunch.
Hallo,
i had the same problem.But i have change the Audiomanager from HTC to Windows and disabled the Bitpool.Since i have no problem anymore.(Till one Week)
Can anyone confirm that.
sorry for my bad english
earthjumper said:
Hallo,
i had the same problem.But i have change the Audiomanager from HTC to Windows and disabled the Bitpool.Since i have no problem anymore.(Till one Week)
Can anyone confirm that.
sorry for my bad english
Click to expand...
Click to collapse
How did you change the default music player and disabled the bitpool? Can you please explain the procedure to me?
Thanks
Hallo,
i usec diamond twaeks. http://forum.xda-developers.com/showthread.php?t=409540
You can change the audiomanager to windows and at bluetooth you can switch the bitpool to disable.
I have used the bitpool at high, and i have the problem, i change it to disable an i have no more problem.
i hope this is the bug and no random...
earthjumper said:
Hallo,
i usec diamond twaeks. http://forum.xda-developers.com/showthread.php?t=409540
You can change the audiomanager to windows and at bluetooth you can switch the bitpool to disable.
I have used the bitpool at high, and i have the problem, i change it to disable an i have no more problem.
i hope this is the bug and no random...
Click to expand...
Click to collapse
Hi again earthjumper,
I have changed the bitpool so let's see what happens. I still don't know how to change the default music layer to media player!
Does it better the audio quality in A2DP ?
Cause I think the Diamond performs very bad, sound quality is awful when I listen to the music through my Jabra BT-8010.
Hissing, bad sound quality, distorsion... What a mess... My Sony Ericsson k800performs MUCH better and acts as a real audio player. With HTC, I could'nt manage to have decent audio in A2DP...
Any tweaks in Diamond Tweaks?
Thanks !
Try the free version of Pocket Music. If you enable the equalizer and play around with the presets, it really sounds good on the Diamond, both through the speaker and through BT headset. All others I tried I had the same experience as you.
http://www.pocketmind.com/pocketmusic.htm
THX a lot for ypour quick answer !
I'll give it a spin and keep you updated.
I am afraid it does not work at all...
I still hear these distorsions/metallic noises in high frequencies. It not "earable". It still really creates unintentionnal sounds, hissing and noise, lots of noise...
I have tried any single MP3 player for my diamond but none is working... I guess the A2DP is defective in ths unit.
I am left with a very sad feeling of disappointment... It's another world when I plug in the default corded headset which came out with the unit. Nice sound, not the best of course, but a REAL increase in quality. Niothing is wrong in high frequencies, everything is much smoother and less metallic.
Thanks for your help anyway !
Any other tweak that I might use ? Registry setting, Diamond Tweak... ?
Sound is so unnatural it looks like there's something wrong with a setting... And I don't think the Jabra BT-8010 is faulty here. It could be, but I really don't think so...
@cornwall,
have you change any bluetooth settingss?
when i change the joint-stereo setting to disable, the sound over my bt-headset very bad.let it enable the sound is good, but low bass.
cornwall said:
I am afraid it does not work at all...
I still hear these distorsions/metallic noises in high frequencies. It not "earable". It still really creates unintentionnal sounds, hissing and noise, lots of noise...
...
I am left with a very sad feeling of disappointment... It's another world when I plug in the default corded headset which came out with the unit. Nice sound, not the best of course, but a REAL increase in quality. Niothing is wrong in high frequencies, everything is much smoother and less metallic.
...
Click to expand...
Click to collapse
cornwall said:
And I don't think the Jabra BT-8010 is faulty here. It could be, but I really don't think so...
Click to expand...
Click to collapse
Thats not your Jamba, i bought yesterday Sony Ericsson Bluetooth stereo loudspeaker,
(MSB-100 i think) and the sound is terrible - you hear so much high frequencies distorsions that your ears suffers (and i'm not a sound freak!).
Tested the loudspeaker with old sony ericsson - no distorsions, sound quality 200% better..
Whats sad I haven't found the solution so far,
only SRS WOW (settings WOW Bass) brings me a little bit satisfaction..
Will try more tricks, maybe new ROM with new drivers ??
Hi all,
We seem to have drifted from my original query! I still have not found the solution. I tried earthjumper's remedy but it didn't work. I have tried other players but you can't control them via Bluetooth (i.e. play/pause/volume etc.). Windows Media Player is OK BUT every time it is run, you have to select the music and the library navigation is meant to be done with a stylus. The thing I like most about TF3D music player is that the music that you have selected to play (finger navigation) is always there even when you reset the device.
So my question again -- is there any solution for my problem or can someone tell me of a Windows media player skin which doesn't require a stylus?
Thanks and apologies for the long post.
I agree, I had an orbit 2, and the sound was fantastic through my car bluetooth stereo, now with the xda ignito the sound crackels and sounds terrible on high frequencys.

Music skipping on Kaiser

I have skipping music during audio playback. To say there is no any regularity in that, but mostly it happends when I use Bt handsfree SE HBH-DS970.
I use Core-player to playback MP3 files.
Suddenly I saw the fix for that problem but only for HTC Touch Diamond. Is there any similar fix for Kaiser?
Thank you!
I have the same problem when I use pocket player and bluetooth. I thought that it was a BT problem, but I have seen the same behavior when it is not connected to Bluetooth. Maybe memory or too many processes.
Don't think so, because there is no other processes in back except Coreplayer.. I tried to change buffer size - no result... Also it happends not only with BT headphones..
Really don't know what to do...

Categories

Resources