Crappy sound with bluetooth earphones. - Touch Diamond, MDA Compact IV General

I'm using Jabra 3030 and I'm getting really crappy sound. If I use the standard earphones, everything sounds great.
I read somewhere that an alternative music player would solve the problem, but nope. Sounds just as bad.
Has this got anything to do with audio booster?
Is there a walkaround to this problem?

Isn't there anyone who has a solution to this problem?

I bought a Jabra 3030 this saturday: Getting it exchanged due to excessive background noise.
It is noise you have too? If so, there is nothing wrong with the phone, its the crappy 3030 as other phones and even a laptop does the same. I've tested with a DS-200 and it sounds as good as wired buds.

There are some registry tweaks that greatly improve BT audio.
Under HKLM\Software\ Microsoft\Bluetooth \A2DP\Settings , remove the "MaxSupportedBitPool" and "BitPool" entries.
As usual, don't touch your registry if you are not sure, and keep a backup just in case...
http://www.pocketpcmag.com/cms/blogs/3/wm6_aamp_microsoft_bluetooth_a2dp_stereo

No, i think it's the lack of bass that makes the sound so bad.
That's why I thought of audio booster.
When I'm watching movies the sound is ok, but my metal sounds blah.
I don't think the problem lies in the Jabra device.

Renewing topi. Does anybody have any idea how to enable AudioBooster on BT headphones? It is disabled unless you connect normal headphones. Hopefully there is an option in reg somwhere to do it....

Why not just try a player that has a built in pre-amp????
- CorePlayer
- SRS WOW
That would solve your problem - if lack of bass is the problem. At least it would be a good (and quick) test.

Related

Poor bass with third party headphones

Sound with the HTC supplied headphones is OK, but I've just tried some Goldring gx200's and there was hardly any bass and overall poorer sound
What is the problem?
Are you using the built in Audio player?
Did you enable the 'Audio Booster'?
It is a known problem that this happens. You need to disable the Audio Booster as it has a bug that ruins the bass.
This has been talked about over and over again!
I have seen the audio booster problem mentioned, but I did not find any posts where it mentioned this problem with other headphone makes.
In my case audio booster was off for both headphones
It is a software bug, therefore it affects all headphones, no matter who made them.
If you enabled Audio booster at any point EVER, then it will screw the bass up.
If i remember rightly, you have to turn it on and then off again while the headphones are connected and it should solve it.
I have not used Audio booster at all. If I use the HTC supplied headphones then bass is fine, but if I use the third party ones there is no bass.
I can't see why it would make any difference, unless there is some electronics within the HTC phones to alter the sound/signal
With Radio or Media Player?
PaulusUK said:
I have not used Audio booster at all. If I use the HTC supplied headphones then bass is fine, but if I use the third party ones there is no bass.
I can't see why it would make any difference, unless there is some electronics within the HTC phones to alter the sound/signal
Click to expand...
Click to collapse
Are you talking about listening to radio or to the mediaplayer?
Because only the orginial headset and some replacemnets have an radio antenna in the headset cord.
I am using the RC E100 with my own Sony MDR-ELX90P headphones, and even without Audio Booster, I'm getting plenty of bass.
I can't understand why it would be different for you.
How are you actually connecting your 3rd party headphones by the way?
I am using an adapter to convert the mini-usb to standard headphone plug. This adapter is working OK on my Trinity, and the headphones work OK on other devices.
So its a bit odd.
Sound is from mp3's, I'll try the radio later
Are you sure by chance you do not have a fake headphone?
I bought a fake (I did not know that before) Sony Ericsson headphone, and it has no bass...
Philippe
We are using SRS WOW 2.1 (this disables Audiobooster automaticly), to play around with different sound patterns.
Our new Bluetooth headphones must be able dealing with extreme low bass and high trebles untill we got over modulation at high volume.
We also tested competitive headsets from Sony, Motorola and some cheap Chinese copy-cat though they all give a more than average deep bass.
There is somewhere in another thread mentionning about "gradually decreasing bass" each time when another applic is opened (not the specific audio booster bug)
sorry, couldn't fins the thread anymore

Music player and A2DP

Hi all,
First of all, I have searched a lot but could not find an answer to my question -- if it has already been posted then my apologies.
I have a strange problem. I listen to music via A2DP using the TF3D music player. Everything works fine until I stop listening and switch off my headset. If I then want to listen to music again and switch on my headset, I can't hear anything (either through the headset or the phone speaker) despite the music being played by the player until I soft reset the device and start again, when everything works fine! I have now got a new device for my car (again using A2DP) and have exactly the same problem.
I don't really want to get another music player because the default player serves my purpose just fine.
Any suggestions?
Thanks a bunch.
Hallo,
i had the same problem.But i have change the Audiomanager from HTC to Windows and disabled the Bitpool.Since i have no problem anymore.(Till one Week)
Can anyone confirm that.
sorry for my bad english
earthjumper said:
Hallo,
i had the same problem.But i have change the Audiomanager from HTC to Windows and disabled the Bitpool.Since i have no problem anymore.(Till one Week)
Can anyone confirm that.
sorry for my bad english
Click to expand...
Click to collapse
How did you change the default music player and disabled the bitpool? Can you please explain the procedure to me?
Thanks
Hallo,
i usec diamond twaeks. http://forum.xda-developers.com/showthread.php?t=409540
You can change the audiomanager to windows and at bluetooth you can switch the bitpool to disable.
I have used the bitpool at high, and i have the problem, i change it to disable an i have no more problem.
i hope this is the bug and no random...
earthjumper said:
Hallo,
i usec diamond twaeks. http://forum.xda-developers.com/showthread.php?t=409540
You can change the audiomanager to windows and at bluetooth you can switch the bitpool to disable.
I have used the bitpool at high, and i have the problem, i change it to disable an i have no more problem.
i hope this is the bug and no random...
Click to expand...
Click to collapse
Hi again earthjumper,
I have changed the bitpool so let's see what happens. I still don't know how to change the default music layer to media player!
Does it better the audio quality in A2DP ?
Cause I think the Diamond performs very bad, sound quality is awful when I listen to the music through my Jabra BT-8010.
Hissing, bad sound quality, distorsion... What a mess... My Sony Ericsson k800performs MUCH better and acts as a real audio player. With HTC, I could'nt manage to have decent audio in A2DP...
Any tweaks in Diamond Tweaks?
Thanks !
Try the free version of Pocket Music. If you enable the equalizer and play around with the presets, it really sounds good on the Diamond, both through the speaker and through BT headset. All others I tried I had the same experience as you.
http://www.pocketmind.com/pocketmusic.htm
THX a lot for ypour quick answer !
I'll give it a spin and keep you updated.
I am afraid it does not work at all...
I still hear these distorsions/metallic noises in high frequencies. It not "earable". It still really creates unintentionnal sounds, hissing and noise, lots of noise...
I have tried any single MP3 player for my diamond but none is working... I guess the A2DP is defective in ths unit.
I am left with a very sad feeling of disappointment... It's another world when I plug in the default corded headset which came out with the unit. Nice sound, not the best of course, but a REAL increase in quality. Niothing is wrong in high frequencies, everything is much smoother and less metallic.
Thanks for your help anyway !
Any other tweak that I might use ? Registry setting, Diamond Tweak... ?
Sound is so unnatural it looks like there's something wrong with a setting... And I don't think the Jabra BT-8010 is faulty here. It could be, but I really don't think so...
@cornwall,
have you change any bluetooth settingss?
when i change the joint-stereo setting to disable, the sound over my bt-headset very bad.let it enable the sound is good, but low bass.
cornwall said:
I am afraid it does not work at all...
I still hear these distorsions/metallic noises in high frequencies. It not "earable". It still really creates unintentionnal sounds, hissing and noise, lots of noise...
...
I am left with a very sad feeling of disappointment... It's another world when I plug in the default corded headset which came out with the unit. Nice sound, not the best of course, but a REAL increase in quality. Niothing is wrong in high frequencies, everything is much smoother and less metallic.
...
Click to expand...
Click to collapse
cornwall said:
And I don't think the Jabra BT-8010 is faulty here. It could be, but I really don't think so...
Click to expand...
Click to collapse
Thats not your Jamba, i bought yesterday Sony Ericsson Bluetooth stereo loudspeaker,
(MSB-100 i think) and the sound is terrible - you hear so much high frequencies distorsions that your ears suffers (and i'm not a sound freak!).
Tested the loudspeaker with old sony ericsson - no distorsions, sound quality 200% better..
Whats sad I haven't found the solution so far,
only SRS WOW (settings WOW Bass) brings me a little bit satisfaction..
Will try more tricks, maybe new ROM with new drivers ??
Hi all,
We seem to have drifted from my original query! I still have not found the solution. I tried earthjumper's remedy but it didn't work. I have tried other players but you can't control them via Bluetooth (i.e. play/pause/volume etc.). Windows Media Player is OK BUT every time it is run, you have to select the music and the library navigation is meant to be done with a stylus. The thing I like most about TF3D music player is that the music that you have selected to play (finger navigation) is always there even when you reset the device.
So my question again -- is there any solution for my problem or can someone tell me of a Windows media player skin which doesn't require a stylus?
Thanks and apologies for the long post.
I agree, I had an orbit 2, and the sound was fantastic through my car bluetooth stereo, now with the xda ignito the sound crackels and sounds terrible on high frequencys.

Bad quality sound on Bluetooth Music streaming

I always had my HTC Tilt 2 playing music in my car through bluetooth. Now with my new HD7 I noticed the sound quality is very bad. It sounds like its streams at a low bit rate so all the high frequencies create crackling distorted. Overall sound doesn't have any richness to it. I use the BlackBerry Remote Stereo Bluetooth Gateway: http://www.amazon.com/BlackBerry-Re...M0/ref=sr_1_11?ie=UTF8&qid=1289972227&sr=8-11. The quality of the Tilt 2 paired up with it was really good. I think they need to fix this pronto.
Yeh I have the same problem too, its exactly the same if I use 3.5mm jack aux too, just far too quiet, causes so much distortion, neither bluetooth or 3.5mm sound any better. If you put headphones in you can tell there isnt enough volume at all.
Really needs fixing, seems more of a software issues as I've seen people with various WP7 models complaining about low volume.
Right now I'm having to use my old Touch Pro for audio streaming in the car.
Mine sounds great through headphones and car stereo (BT).
In the car I prefer the sound to my iPhone 3GS through BT and line out.
And the volume is loud enough using Ultimate Ears 5vi IEMs with plenty if bass
Enable the SRS Surround
Sound quality is always in the ear of the beholder, so difficult to fully compare what people consider good or bad.
I find the internal speaker, headphones and line-out (via 3.5mm) too quiet. Quality seems ok from the 3.5mm jack though.
But I tested the BT recently and at high volume it didn't sound very good on a beefy car stereo (with sub). I was disappointed, but had no basis for comparison at the time.
I have this issue too. I'm using the Sony DRBT140Q. The audio sounds perfect when connected to my G1 and Sennheiser BTD-300. But when connected to the HD7 the sound turns kind of...fuzzy on the mids. Gonna go try out other HD7s at the T-mobile store and see if it's a problem with my handset.
I also have this issue. With wired headphones the sound is OK, but with bluetooth audio the sound is bad. I tested it with a jabra BT3030 and with a SonyEricsson MW600. The sound is good with both Headsets when they are connected to my notebook.
HTC are not known for good blutooth support, I was hoping they would get their act together with this phone.
3.5 jack is fine, but bluetooth quality is aweful! was fine on the HD2.
On BT, the bass and mids are ok, but the highs are terrible, they are really crackly/distorted. You can get away with it on dance, because its not too noticable, but in Rock music, it just sounds ****e.
Mujja said:
Enable the SRS Surround
Click to expand...
Click to collapse
If you have the phoned paired via Bluetooth Sound Enhancer makes no difference to the sound whatsoever. Even if connecting to 3.5mm and using sound enhancer it sounds terrible in my car.
Think I'm just gonna have to carry on using my Touch Pro 2 until something is changed with the volume. I just think there isnt enough, you have it too loud its distorted so you turn it down and then turn the radio up but its no better because you get a lot of hiss etc.
If your listening though AUX make sure all the sound enhancements are off, they make it sound terrible. They only make an improvement through the phone speaker.
They dont affect bluetooth at all though.
So is anyone going to fix this?
I have Mozart 7 and fits the same description as previously said :
Bad audio quality when connected with Bluetooth headset (Sony Ericsson MW600)
(crackled/distorted, a low pitch noise at the background, sounds like interference from other things) - ive tried it on everywhere its the same
sounds perfect when its wire connected
This is making me really angry since i got this Bluetooth together with my mozart 7!!!
Can we notify anyone about this in particular??
I have the same problem. Bad quality when streaming via bluetooth to my car radio. With my HD2 and Windows Mobile 6.5 I had exactly the same problem for which there were registry hacks to improve this. Do you think the same registry entries still exist on Windows Phone 7?
Bluetooth audio quality FIXED!!
Ok guys here it is. I figured out how to improve the Bluetooth music streaming quality.
1. Your device must be unlock to do this. Even if your device relocks it doesn’t matter.
2. After unlocking device download and install the XAP file RegistryEditor 1.1.0.0. This is a registry Editor for WP7.
3. Once you have the RegistryEditor 1.1.0.0. on your phone do the following registry hack:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2 DP\Settings]
"Bit Pool"= change Value data to 51.
As I suspected the problem was in the sample rate settings. After I did the hack it sounded beautiful and at full sample rate. Some people don’t have the ear to catch the difference. I like to think I have a very good ear for this sort of thing. Being a musician and aspiring sound designer. I listen to all my music in the car through Bluetooth stereo gateway so I rely on this Bluetooth functionality 100%. Here is an example of the “Value data” number translated to sample rate.
Medium Quality
Bit Pool=35, Sample Rate=44.1 kHz = 229 kb/s
Bit Pool=33, Sample Rate=48 kHz = 237 kb/s
High Quality
Bit Pool=53, Sample Rate=44.1 kHz = 328 kb/s
Bit Pool=51, Sample Rate=48 kHz = 345 kb/s
Last Note: Even if you cannot unlock your phone anymore it won’t matter. As long as you gain access to that registry and change it. Unless you do a hard reset or Windows update you will need to repeat the process or unless Microsoft slaps their head about this issue before they release that update.
Wow that sounds like a plausible solution!!
Has anyone else tried it yet? Im still considering whether to hack my phone or not.
Try it. You wont regret it.
It works! did it last night and music was perfect in the car this morning! so happy now!
Just need a reg hack that allows me to download big files from the marketplace through my own 3G signal and not wifi now and ill be very very happy!
Also set "UseJointStereo" to 0 since one of the common joint stereo algorithm uses a lossy audio compression. BT Music sounds great with these changes!
What a difference
Thnx, sounds awesome.
toothfish said:
So is anyone going to fix this?
I have Mozart 7 and fits the same description as previously said :
Bad audio quality when connected with Bluetooth headset (Sony Ericsson MW600)
(crackled/distorted, a low pitch noise at the background, sounds like interference from other things) - ive tried it on everywhere its the same
sounds perfect when its wire connected
This is making me really angry since i got this Bluetooth together with my mozart 7!!!
Can we notify anyone about this in particular??
Click to expand...
Click to collapse
i´ve the same headset and i noticed that srs-optimizing and dolby mobile is not working over bluetooth
also i cannot play forward
Verizon Trophy Fixed
Thanks for this fix! I finally got my Verizon Trophy fixed after
1. Trying to deploy RegistryEditor 1.1.0.0 only to get a deployment error
2. Trying to deploy RegistryEditor 1.2.0.0 only to get a deployment error
3. Editing the XML file in RegistryEditor 1.2.0.0, which successfully deployed the .xap but wouldn't actually let me edit the necessary values BitPool and UseJointStereo. I could change them in the editor, but as soon as I navigated away from the editor they would return to their defaults.
4. Attempted this http://forum.xda-developers.com/showthread.php?t=1271963 only to be unable to run Connection Setup app
5. Completed this http://forum.xda-developers.com/showthread.php?t=1271963&page=64 after about 10 iterations of trying to open the Connection Setup app at the exact moment described. I didn't think it would work, but it did.
So, in summary, in order to install a registry editor (1.2.0.0) AND have it edit the BitPool and UseJointStereo values on my student developer unlocked Verizon Trophy running official mango update, I had to do an interop unlock.
Took me a few days to sort through, but I'm so unbelievably happy with the result!

[Q] Dear god, why is audio over bluetooth so terrible??

Just replaced my worn out Dell Venue Pro with an HD7 I bought off ebay. I love it, except I just discovered bluetooth audio from the HD7 is disgraceful. Sounds like a 64kbps mp3 but worse... The highs are all garbled and weird. This is a major deal breaker for me as I really love the convenience of using bluetooth to stream audio to my car receiver.
My Venue Pro sounded wonderful over bluetooth, so I know it's not my receiver. Is this a hardware limitation? Is there anything I can do to fix this? If not, it's gonna find itself back on ebay...
Figured it out. Turns out HTC has the A2DP bitpool set ridiculously low in the registry, resulting in highly compressed audio. I'm guessing it's either really big oversight, or they did it to insure compatibility with various headsets. After installing a custom ROM and editing the appropriate values in the registry, Bluetooth now sounds as good as wired!
Loving my HD7!

Headphones issue

Hello again
Really often I use my phone as a media player, especially in my car, connected via headphones cable. Until now all works fine with all my devices, but with the Maze Alpha the sound is just in mono (left side) - with any app. In the android settings I disabled the sound reinforcement options but nothing is changed.
I know that the speaker plays sounds just in mono, but I found no hints in reviews that this is the same for headphones. If this device generally not able to play sounds in stereo, is this a big fail for the manufacturer.
So please check my issue and give me a feedback. I'd also be happy if someone can tell my a solution for this to get real stereo sounds.
Many thanks in advance and best wishes
Dan
Headphone jack
Same issue here only one chanel
I haven't try to use it directly with large speakers though. It seems that you might need an amplifier to get the right sound despite defaulting to a stereo sound system only. The secret is to sound issue in Maze Alpha is to get quality earphones.

Categories

Resources