Related
Does anyone have this problem ?
Connect IE via yr mobile EDGE service..for my case is Digi in Malaysia. The first few mins or pages..it works fine..Right after that IE cannot reach any pages and time out.. All the while the "E" for data services is still connected. Brought it back to HTC service centre...they tested 1 week , change 2 mother boards and swap one new unit...still the same issue..Its not sim issue as my connection does not break in other phones. Issue prevails in Google Maps, MSN Messenger and Shape Service IM+. If anyone knows a fix...pls help as I dunno what to do with an expensive phone that cannot sustain connection over EDGE or GPRS
Thanks
Have you flashed your rom to a different one other than stock? what about the radio, which version are you using, is it stock?
I would lean towards a radio issue or the edge service sucks.
i do know that on my older 8125 (wizard) that after about 3 days of being in constant connection i would get the same problem, but all i would have to do is disconnect form it and reconnect and it would be fine again for a long wile.
Hi pdpt,
Yes I have flashed to many ROM's and Radio including, Stock, Dutty's, Sleuth, Vega, No thrills, SNE, Alex while RADIO ROMS for WM6 and 6.1 including Nikki's , Polaris etc etc. Unfortunately all results the same. Have also tried manual connection setup, Kaiser Tweak (Edge always on) disabling the 3G portion, diabling HSDPA but those only saves batt drainag.
My previous Dopod 838Pro and the HTC Touch doesnt have this issue. Its only confined to Tytn II.
You state you've flashed to many ROM's. Have you flashed back to a stock ROM from ATT or HTC? Can make all the difference.
yes of course i did flashed back to original. the new unit i got back was also stock
cmloo said:
for my case is Digi in Malaysia.
Click to expand...
Click to collapse
well i dont know much about the edge service in Malaysia but before i say its borked try getting a new sim card. if that doesnt work im going to say that there might be something wrong with the unit itself esp if the sim card works in another phone and you can surf the internet with no problem.
I just got a Diamond last week and have been using it on T-Mobile in the United States, and it's great and all but I don't think I ever got Data to work... But that's irrelevant now, because my family just suddenly switched my plan to ATT after being on T-Mobile for 10 years, so now I need to switch my Diamond to an ATT network. I put the SIM card in, and the Diamond asked me if I wanted to change settings and I said yes. I restarted the phone, but I still can't get a connection, I have no service. Please help -- what should I do to get this phone going for calling and texting, and then switching my old number over? I'm not concerned about Data just yet.
Try running the Connection Setup wizard again. Mine worked fine on ATT after it automatically configured it.
Yeah I tried running it again, still nothing. Next to the little signal indicator, all I've got is the exclamation point. Do I need to somehow delete old settings?
One thing I've done after flashing and after the setup has run is change the following: Settings/Personal/Phone/Band -- Set network type to GSM, and band to UMTS(850+1900)+GSM(850+1900). I'm not sure if it makes a difference though, and I don't really know what settings the Connection Setup changes. Maybe the band settings will work for you?
That was the first thing I tried. I just got off the phone with ATT for 2 or so hours, and their solution was to visit a local store. I'm going to try this tommorow. In the mean time I'm stuck using some LG free phone
GeckoDev said:
One thing I've done after flashing and after the setup has run is change the following: Settings/Personal/Phone/Band -- Set network type to GSM, and band to UMTS(850+1900)+GSM(850+1900). I'm not sure if it makes a difference though, and I don't really know what settings the Connection Setup changes. Maybe the band settings will work for you?
Click to expand...
Click to collapse
How does your Diamond run UMTS 850/1900? I know they unlocked 850mhz GSM, I didn't know UMTS was unlocked as well...
Black93300ZX said:
How does your Diamond run UMTS 850/1900? I know they unlocked 850mhz GSM, I didn't know UMTS was unlocked as well...
Click to expand...
Click to collapse
This is what it says in the settings. I was surprised myself, as I've never even flashed my Diamond..
DrSilverworm said:
This is what it says in the settings. I was surprised myself, as I've never even flashed my Diamond..
Click to expand...
Click to collapse
No **** huh? Where did you get your Diamond? Does 3G work perfectly in the states?
t-mobile to ATT
I just went from t-mobile to att.
i just popped the att sim card in and it configured it to att automatically. I also updated the rom which allows you to get a GREAT signal with att. Before the update ROM my signal was spotty. Where i got 1 bar i get 4 now.
Good luck ...it should work. But!!! no 3G....however its fast enough for me for what i use it for. IM very happy with my Diamond.
Rom 1.37.456.2 WWE
Rom Date 6-19-08
Radio Version 1.00.25.05
wfhowell said:
But!!! no 3G....
Click to expand...
Click to collapse
That's what I expected, which is why I'm so perplexed by silverworm having UMTS 850/1900 available.
Black93300ZX said:
That's what I expected, which is why I'm so perplexed by silverworm having UMTS 850/1900 available.
Click to expand...
Click to collapse
That's just what the setting says ... the last part of it (GSM 850+1900) is what gets used.
DrSilvermorm, you might want to try flashing the 1.93 ROM with the .05 radio. It'll only take you 15 minutes, instead of hours for the store. I went from 1-2 bars to 4 bars in some areas with the radio update, and my connection is more stable than it was in 1.37.
GeckoDev said:
That's just what the setting says ... the last part of it (GSM 850+1900) is what gets used.
DrSilvermorm, you might want to try flashing the 1.93 ROM with the .05 radio. It'll only take you 15 minutes, instead of hours for the store. I went from 1-2 bars to 4 bars in some areas with the radio update, and my connection is more stable than it was in 1.37.
Click to expand...
Click to collapse
Umm, no, a setting doesn't "just say" UMTS 850/1900... The Diamond has been advertised with the new 850mhz GSM band, but everywhere it says it only has 900/2100mhz UMTS band. For there to be a setting for 850/1900 contradicts everything we've seen about the Diamond.
Black93300ZX said:
Umm, no, a setting doesn't "just say" UMTS 850/1900... The Diamond has been advertised with the new 850mhz GSM band, but everywhere it says it only has 900/2100mhz UMTS band. For there to be a setting for 850/1900 contradicts everything we've seen about the Diamond.
Click to expand...
Click to collapse
It was discovered a couple weeks ago that the Diamond is actually quad band, and that the original ROMs had simply locked the 850 band (for reasons only known to HTC). The first hint of this was the release of the 1.93 Hong Kong ROM: http://forum.xda-developers.com/showthread.php?t=410720
The setting for GSM 850+1900 does in fact work.
Well, it only said this in my settings, I wasn't actually getting UMTS or GSM, for that matter. I went to the ATT store today and they were very impressed to see my Diamond the employee ran to the back to show his manager. I told them about my dilemma and they said that in Cincinnati (where I live), ATT runs exclusively on the 850 band.
I figured, duh, all I need to do is flash my ROM like so many of us have done to enable 850. I shouldn't have expected it to work, depsite what it says in my phone's settings, because I have yet to flash my ROM at all.
However, I am totally new to Windows Mobile and flashing ROM presents an even bigger challenge to me. All this talk about hardSPLs and cooked ROMS and .NET frameworks has gotten me very confused. I couldn't even get Windows Mobile Device Manager to install properly last week when I was on T-Mobile and trying to install some emulators, so naturally, I'm very frustrated . I'm very tempted to just sell my Diamond and go get an iPhone 3G, but I think I still have not lost hope yet.
Is there a comprehensive, step-by-step guide for flashing my ROM to a 850-enabled version with vista that anyone could point me to? This would be very very much appreciated! I don't want my $700 investment to go to waste so soon.
Edit: After using the excellent "search" feature of these forums (sorry forum veterans) I have found I promising guide that I will employ shortly, found here: http://forum.xda-developers.com/showthread.php?t=406968. I will let you know of the results when I am done. I think I am going to try to flash to the ROM that GeckoDev recommended, if I can find it. Thanks friends!
GeckoDev said:
It was discovered a couple weeks ago that the Diamond is actually quad band, and that the original ROMs had simply locked the 850 band (for reasons only known to HTC). The first hint of this was the release of the 1.93 Hong Kong ROM: http://forum.xda-developers.com/showthread.php?t=410720
The setting for GSM 850+1900 does in fact work.
Click to expand...
Click to collapse
That's NOT my question! I'm 100% aware the ROM has unlocked 850mhz GSM, we've been over this a million times. But 850/1900mhz UMTS is for 3G, and I've never seen a Diamond working with 3G in the states. THAT's what I'm asking about, the GSM bands have never been a question.
Well Silverworm, good luck. If this is the site you found in that thread, this is the one I've checked out when learning how to flash ROMs.
http://modmydiamond.info/
Black93300ZX said:
Well Silverworm, good luck. If this is the site you found in that thread, this is the one I've checked out when learning how to flash ROMs.
http://modmydiamond.info/
Click to expand...
Click to collapse
Yup, that's the one, thank you. So far though I haven't been able to get past the Hard SPL step though. Every time I run the ROMUpdateUtility all I manage to do is soft-reset my phone and get ERROR: 260 CONNECTION on the utility. I can't get past 0% on the update utility, and it tells me I should check to see if it's plugged in. It is indeed plugged in, directly to my laptop, and not to my USB hub. It is even able to tell me what my current ROM is, so I don't see how it can question whether or not the Diamond is plugged in. What am I doing wrong?
I establish ActiveSync everytime I plug my Diamond into my laptop, but there was one note in the how-to guide that was peculiar to me: *Make sure the activesync icon is be green (finished synchronizing). On my windows vista business OS, I don't see an activesync icon in my system tray, even though I establish activesync everytime I plug in my Diamond. Is this part of the problem? If so, what should I do?
I've tried both Olipro's 1.20 and Des's CrashProof SPL. Both had the same problem. Also, I couldn't successfully enter the bootloader to check my SPL. The guide said to press the power, camera, and reset buttons at once, but there is no camera button to my knowledge. I searched on the forums and somewhere else I read that you just need to press volume down and reset, but for the few times I tried this this just soft-reset my Diamond...
As for your question about why it has 850 UMTS as an option as my settings, I have no idea, and I am sure it will not work because I can't even get the regular 850 band working. But this is what it says. If you really like, I can post a picture.
I tried searching in the forums, but I can't find anyone with my same problem. If this has already been resolved, a link would be very much appreciated.
I'm still having the same problem everytime I try to run ROMupdateutility -- all it does is reset my phone, then tells me error 260 -- that my phone is not connected, and that I should check the USB. Why does my phone keep resetting?
Again, I am using Windows Vista Business 32 bit, and the phone is plugged in directly through the laptop. Please please help, I really do not want to sell my phone, if I can help it.
DrSilverworm said:
I tried searching in the forums, but I can't find anyone with my same problem. If this has already been resolved, a link would be very much appreciated.
I'm still having the same problem everytime I try to run ROMupdateutility -- all it does is reset my phone, then tells me error 260 -- that my phone is not connected, and that I should check the USB. Why does my phone keep resetting?
Again, I am using Windows Vista Business 32 bit, and the phone is plugged in directly through the laptop. Please please help, I really do not want to sell my phone, if I can help it.
Click to expand...
Click to collapse
I had a problem like this with vista. I went to start-> settings-> connections-> usb to pc (on the phone) and unchecked 'enable advanced network functionality'. Unplugged the usb cable and plugged it back in, worked like a charm.
RavenGirl said:
I had a problem like this with vista. I went to start-> settings-> connections-> usb to pc (on the phone) and unchecked 'enable advanced network functionality'. Unplugged the usb cable and plugged it back in, worked like a charm.
Click to expand...
Click to collapse
I tried this, and it still just soft-resets. Thank you very much for the suggestion, though. Any other ideas?
Also still having trouble running the bootloader, how do I do this? Is it a crucial step, or only necessary for checking which SPL I have?
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked
Hey. Today is not my day
My phone wont work with GSM anymore, it works well with 3G but when it tries to connect to a GSM network it just dies :/ i have no clue what it could be. It was working well yesterday, i have tried to do a hard reset but still wont work. any ideas? Thanks.
Sorry for bad english!
by the way, there is a strange sound in the speaker when it tries to connect to a GSM network.
and it doesnt die if i have it on charge.
has you have set the telefonsettings to gsm network or to automatic?
My phone also needs the manual setting to GSM.
fraham said:
has you have set the telefonsettings to gsm network or to automatic?
My phone also needs the manual setting to GSM.
Click to expand...
Click to collapse
On automatic it sets on 3G becurse i got 3G here, and if it losts the 3G connection and tries to connect to GSM it dies. ( thats how i found out about this problem on the way too school this morning. )
in my network i observe problems with connects to GSM: Sometime i lost the GSM connection/signal, where my Wizard has a safty connection.
It can be a standard Problem with the current Radio ROM
I think about change the radio ROM. pse look to Diamond ROM development to find a instruktion. the ".25.05" should be the best Radio Rom with a better energy performence and better Signals. http://forum.xda-developers.com/showthread.php?t=407956
BUT i have not change in this time, while i test my Battery performance after a reducing of background software/applications.
fraham said:
in my network i observe problems with connects to GSM: Sometime i lost the GSM connection/signal, where my Wizard has a safty connection.
It can be a standard Problem with the current Radio ROM
I think about change the radio ROM. pse look to Diamond ROM development to find a instruktion. the ".25.05" should be the best Radio Rom with a better energy performence and better Signals. http://forum.xda-developers.com/showthread.php?t=407956
BUT i have not change in this time, while i test my Battery performance after a reducing of background software/applications.
Click to expand...
Click to collapse
Yea, but how come it just pops up this morning and the phone just dies completly when it connects to GSM? :S i have the .03 radio, and about upgrading that i dont know if i want to, what about guarantee and such if it wont fix the problem? i still can return it back. I dont want to loose warranty.
Thanks
w3pp3 said:
Yea, but how come it just pops up this morning and the phone just dies completly when it connects to GSM? :S i have the .03 radio, and about upgrading that i dont know if i want to, what about guarantee and such if it wont fix the problem? i still can return it back. I dont want to loose warranty.
Thanks
Click to expand...
Click to collapse
die completly = shut down/swith of the Diamond?
This i not have obervate.
If you follow the instructions, the Radio update is out of problems. If you will get the old radio version, so you can get it back with the original provider update of ROM.
for german Vodafone there is a download by vodafone.de under "technischer Support". i think the most providers has a update download. Look to your provider, if there be a ROM update.
fraham said:
die completly = shut down/swith of the Diamond?
This i not have obervate.
If you follow the instructions, the Radio update is out of problems. If you will get the old radio version, so you can get it back with the original provider update of ROM.
for german Vodafone there is a download by vodafone.de under "technischer Support". i think the most providers has a update download. Look to your provider, if there be a ROM update.
Click to expand...
Click to collapse
Yes it completely dies, like a shortcut
I'll have too check it out, im from .SE so i'll need to find a radio that works here then?
Thanks
before you look for a new Radio, make a reset or a hard reset. My be, that it "repair" your problem.
By my WIZARD i has update the Radio.
I think, that the radio ROMs for the Diamond are also standards (how by the WIZARD) without differences.
Radio ROMs look to:
http://forum.xda-developers.com/showthread.php?t=407956
or
http://forum.xda-developers.com/showthread.php?t=432770
Instruction for Flash: http://forum.xda-developers.com/showthread.php?t=416211
in this both threads must be a information for select the right Radio Rom.
fraham said:
before you look for a new Radio, make a reset or a hard reset. My be, that it "repair" your problem.
By my WIZARD i has update the Radio.
I think, that the radio ROMs for the Diamond are also standards (how by the WIZARD) without differences.
Radio ROMs look to:
http://forum.xda-developers.com/showthread.php?t=407956
or
http://forum.xda-developers.com/showthread.php?t=432770
Instruction for Flash: http://forum.xda-developers.com/showthread.php?t=416211
in this both threads must be a information for select the right Radio Rom.
Click to expand...
Click to collapse
Thanks for the advices!
Now im damn happy. for some reason it works like a charm again, i just had to fully charge the battery... :S dont know what went wrong. :s
I will stil flash my device tho : P
Thanks alot!
OK, i hope you get a better Signal after changing the Radio version.
so as i have read, is version 05 the optimal version with stable signal and lower battery consumption.
pse read self the linked threads to find your optimal Radio ROM.
fraham said:
OK, i hope you get a better Signal after changing the Radio version.
so as i have read, is version 05 the optimal version with stable signal and lower battery consumption.
pse read self the linked threads to find your optimal Radio ROM.
Click to expand...
Click to collapse
I will thanks for your help!
I just flashed unsigned HardSpl and it works so far
Thanks!
OK, i'm happy, that i can help you...
good night and greetings
Frank
I said it was working... yea it WAS while it got 100% battery power, when it sinks the GSM net losts connection, and when the battery is under approx 60% the phone starts to die.. anyone got any new tips today? : )))
hi all,
got this damn problem now too, yesterday and the 2 months before all works fine, and now ive got no gsm signal, 3g works but gsm not. did anyone found a reason? i try all... reflash radio (different versions) soft and hardreset but nothing works
please help me if anybody can
TomDaDj said:
hi all,
got this damn problem now too, yesterday and the 2 months before all works fine, and now ive got no gsm signal, 3g works but gsm not. did anyone found a reason? i try all... reflash radio (different versions) soft and hardreset but nothing works
please help me if anybody can
Click to expand...
Click to collapse
Hey, I did never solve the problem, i have sent mine back on warranty so i hope HTC will fix it for me.
No flashing will fix this problem, so you dont need too try that anymore.
I did all i could think of and didng make it so i let HTC fix it for me
If they say something about whats was wrong when i get it back i will tell you
w3pp3 said:
Hey, I did never solve the problem, i have sent mine back on warranty so i hope HTC will fix it for me.
No flashing will fix this problem, so you dont need too try that anymore.
I did all i could think of and didng make it so i let HTC fix it for me
If they say something about whats was wrong when i get it back i will tell you
Click to expand...
Click to collapse
hi,
i dont know whats going on with my device
today at my home in the morning nothing works, one hour later exactly at 8 o' clock when i arrived my work all WORKS, i've got the gsm signal under 1 second (yesterday at night my diamond search over 10 minutes for gsm signal, then it cames, but no gprs connection was possible). now i was very angry because i do a hard reset yesterday and i had to install and copy over 2 gb of data!
TomDaDj said:
hi,
i dont know whats going on with my device
today at my home in the morning nothing works, one hour later exactly at 8 o' clock when i arrived my work all WORKS, i've got the gsm signal under 1 second (yesterday at night my diamond search over 10 minutes for gsm signal, then it cames, but no gprs connection was possible). now i was very angry because i do a hard reset yesterday and i had to install and copy over 2 gb of data .
****ing htc! (sorry to say that because i loving my diamond and other devices so much)
Click to expand...
Click to collapse
Mine did work when i have a fully charged battery, but when the power dropt it just died again
w3pp3 said:
Mine did work when i have a fully charged battery, but when the power dropt it just died again
Click to expand...
Click to collapse
i read your problem....
but now iam really going crazy, now i arrived @ home from work....
now what do you think... NOTHING works now... it looks that i have a anti gsm antenna @ my home
but i think its a software issue... i try now to reflash my original tmobile stock software with radio ( i do this 1 month ago because i became this error now for the second time)
hope it helps - i will post the results....
it IS a software issue!
now after reflash to original stock 1.37 + stock radio 1.03 , gsm connection works immediatly!!!!
hope this info help other poor guys which have this ****ing !!BUG!!
greetz
Congrattulations )
Im still waiting for HTC too fix mine : P
I have an AT&T Tilt, and I ran the unlocker on it.
Recently I installed the TPC V11 Chumpstyle rom which is a 6.5 rom. Things seemed fine on it for the first couple days but then I noticed it was constantly disconnecting without notice from the service. Texts would randomly stop going through, and when I would go to make a call, it would end the call after about 10 seconds of unsuccessful dialing. Same with the data.. no browser would work.
I decided to try out different radios and different SPLs, even mirroring peoples setups which I assume were working since they have them in their sig lines.
These are the combinations I have tried:
HardSPL 3.29
USED:
1.70.19.09 - Intermittent. Only gets off 4-5 text messages before disconnect.
1.65.21.18 - No 3G connection
1.71.09.01 - No Service
1.70.18.02 - Intermittent disconnect
1.65.17.54 - Long connection time after startup - refuses to connect
HardSPL 3.56
USED:
1.64.08.21 - 4 minute connection time on startup, camera doesn't work
1.71.09.01 - No Service
1.70.19.09 - Intermittent disconnect
1.70.18.02 - No Service
HardSPL 3.34 Dave
USED:
1.70.18.02 - No Service
1.70.19.09 - Intermittent
What surprises and annoys me most is right now I have the stock rom/radio
Rom: 3.57.502.2
Radio: 1.65.21.18
and it does the same exact thing. It is very intermittent, works for 5 minutes after startup, and then nothing.
Nothing on the forum I have been able to search has helped me with this issue, and any help anyone can offer would be greatly appreciated.
one more thing comes to mind that might be worth a shot...
try to disable the 3G/HSDPA mode altogether and configure the device for plain GSM mode only. see how that fairs with the stock configuration or any of the "recommended" combinations of SPL and radio.
ASC - thanks for the reply. I am not certain how to disable 3g/hsdpa modes. I'll look around to figure it out and then post my results here.
Thanks again
It seems that the edge still connects, but I am having the same issues. Just randomly stops all connection
This is the same issues mine developed within the last month. No luck yet tho.
robseargeant said:
This is the same issues mine developed within the last month. No luck yet tho.
Click to expand...
Click to collapse
Just lovely. I really would like a way to fix it. I don't plan on paying 125.00 for the insurance costs to get a new one, and really don't want to spend 300.00 on a TP2.
Thanks for your post, keep me updated if possible!
After looking at some of the newer thread posts, I think I may have a hardware issue here. Anyone able to tell offhand whether it isn't or if it could be, and/or if it is possible to fix?
I swapped out my motherboard with a friends who had given me thiers last year due to a broke screen. I did a Sprite back up and everything has been good for 24 hours.
Hey I think I have a similiar problem
2 weeks ago I was home and just lost service while the rest of my family and i usually had serivice. I would get service occasionally but only for 30 seconds or so and maybe like once every 15 minutes.
So I went back to school and for 2 straight weeks I had absolutely no problems.. and now I'm home again and I have the same problem..
Also last night I started using an old RAZR and it worked fine untill this afternoon seems to be acting the same, but when I went to ATT last time I was given a new SIM card...
Really weird.
I went through the SIM card swap as well. From what rob said it sounds like a hardware issue. Bad batch of AT&T Tilts all going bad around the same time?
I used advanced config to shut off data connections and then set my band to GSM and mine works fine now..
I just did the same using Advanced Config. I'll see what happens. I have no "Band" setting tab.
Did that help mini... after i did that mine "kinda" worked but then when i switched the band it worked perfect. I think you might have do so something in advanced to get the band tab to appear in "Connections." Ill try to figure out what I did
Try to see if you have the "Band" tab under "Phone", sorry it's not under connections, its right after network. I I switched network type from auto to GSM. If the page isnt there in advanced config under phones there is an option to "Show Band Page"
Also same intermittant issue w HSDPA
All,
My rom (Athene) has a setting under connections to disable HSDPA. I've found the phone works pretty well with HSDPA disconnected. I've also tried different radios and still having the same problem.
My assumption is that the TILT (8925) was never really designed for HSDPA or that the spec has changed since AT*T has started implementing it.
When I have HSDPA turned on, it works for about 2-5 mins then I cannot use Medianet or make/receive calls.
However, I know that HSDPA is working sometimes, because I did a speed test and found that I got approx 450kbps w/ HSDPA turned on. With EDGE, I only get 140-150kbps.
I say we all petition AT&T (or whoever your provider is) as well as HTC and require that they provide us with new versions of the TILT that actually support HSDPA properly. Obviously, if that many of us have the same problem and we all have different rom's and radios, it's got to be a network or hardware issue.
I plan to call / write ATT & HTC today. I'll let you know my findings.
Regards,
Austin
It's definitely got to be HTC/AT&T's fault. This is no coincidence. This is bs.
Well, I just got off the phone with Asurion and I have some good news.
As the Kaiser is no longer manufactured, and the HTC Fuze replacement they offered me does not fit my needs, they are replacing my Kaiser with a brand new Rhodium with a 12 month warranty. Farewell, Kaiser forum!