Related
OK guys. I've got my clean ROM running. So far no bugs but I keep finding things to remove. It runs really fast, too. I also don't have that bug that the Touch-IT based ROMs have with their internet explorer being very stuttery. I'll run it for a week or so (and remove a few more things) before I release it to you guys, though.
Now... If I could just get either BigStorage working and/or was able to merge the extROM with the storage... So far, I've had no success on either. Probably because of the DOC storage system... :-(
Because of the lack of bigstorage, we have a lot of unclaimed space.
Storage memory: 36.28MB (This means you can add your own programs without loosing this space.)
Program memory: 27.00MB when first turned on. 26.xx when it starts using parts of it for caching purposes. (28.xx with some tweaks that I will probably not setup in the final ROM because they will make certain things not work the way everyone else is used to.)
Updates:
Bugs found:
1. Notepad doesn't not launch or open in any way shape or form.
Bugs fixed:
1. The volume slider is acting as an up and down arrow instead of a volume slider. If anyone has any input on what controls this, I'd gladly appreciate the help. Also, tapping on the volume control does nothing.
And a little teaser... There's a little over 300+ packages on my next release of EasyBakeOven... which is why it's taking so long. I'm trying to weed out the useless ones, though.
Mental note: Check out the LGplugin to make it a package.
Disclaimer: Should you choose to flash the released ROM or any of its versions, released or otherwise, you are solely responsible for your equipment. I take no responsibility for any damage caused by this ROM nor by any negligence on your behalf while flashing said ROM. I will provide support to the best of my abilities only and ONLY if you have fully read the FAQ I will later provide, read this WHOLE thread AND the instructions, following them to a t. If I do not answer right away, please do not repeatedly ask me with countless PM's. This will not get me to leave my paying job faster and get me online to even SEE that you have a question. If I cannot answer the question, I will tell you. If it's posted here and I haven't responded for over a week, then post another message reminding me. I probably missed it. It is NOT ok to PM me asking me the same question that someone else has already gotten a response for. Read the whole thread. Other than that, I HOPE YOU ENJOY THE ROM!!!
ivanmmj said:
OK guys. I've got my clean ROM running. So far no bugs but I keep finding things to remove. It runs really fast, too. I also don't have that bug that the Touch-IT based ROMs have with their internet explorer being very stuttery. I'll run it for a week or so (and remove a few more things) before I release it to you guys, though.
Now... If I could just get either BigStorage working and/or was able to merge the extROM with the storage... So far, I've had no success on either. Probably because of the DOC storage system... :-(
Click to expand...
Click to collapse
this sounds really good I've looking and waiting for a good clean rom, and still have not seen a really good one I tried evry rom on here but they all have issues, the best one that I have no issues with is ITJE's touch it light based on the original T-Mo rom, it's just not light enough and the installed touch features are already outdated since new versions came out. so I will be watching you Mr Ivammj..and thanks for your work in advance..
Hi
somewhere I read that the extrom in herald cannot be freed and given to the regular rom/ram like in other devices. (Don't know the source and whether this is really true ... ) The only thing you can do is use the extrom as additional memory and install applications in it.
Maybe you could try this: http://forum.xda-developers.com/showthread.phpt=308175
The extrom can be "opened" using winimage on a PC . Then you can put applications in it (but I have not figured out how to do this best) and write it back to the device.
I have never tried it so I don't know if it work or bricks your phone. But maybe this will direct you to the right direction.
Good luck and please post your experiences.
trallala said:
Hi
somewhere I read that the extrom in herald cannot be freed and given to the regular rom/ram like in other devices. (Don't know the source and whether this is really true ... ) The only thing you can do is use the extrom as additional memory and install applications in it.
Maybe you could try this: http://forum.xda-developers.com/showthread.phpt=308175
The extrom can be "opened" using winimage on a PC . Then you can put applications in it (but I have not figured out how to do this best) and write it back to the device.
I have never tried it so I don't know if it work or bricks your phone. But maybe this will direct you to the right direction.
Good luck and please post your experiences.
Click to expand...
Click to collapse
Thanks for the idea! I'll probably create a blank extROM and unlock the ROM from my ROM.
FZZF said:
this sounds really good I've looking and waiting for a good clean rom, and still have not seen a really good one I tried evry rom on here but they all have issues, the best one that I have no issues with is ITJE's touch it light based on the original T-Mo rom, it's just not light enough and the installed touch features are already outdated since new versions came out. so I will be watching you Mr Ivammj..and thanks for your work in advance..
Click to expand...
Click to collapse
^_^ Thanks
Mine is VERY bare as it's going to be a base to my Kitchen. Too bad I can't reclaim a lot of that wasted space because of the fixed size of the img file on the Herald devices. What touch features are you refering to. The ONLY thing that I've really added per say is a newer version of HTC's X button/task manager and the Cubeless TouchFlo features.
ivanmmj said:
^_^ Thanks
Mine is VERY bare as it's going to be a base to my Kitchen. Too bad I can't reclaim a lot of that wasted space because of the fixed size of the img file on the Herald devices. What touch features are you refering to. The ONLY thing that I've really added per say is a newer version of HTC's X button/task manager and the Cubeless TouchFlo features.
Click to expand...
Click to collapse
I was referring to the touchflo which I don't even use other then the scrolling feature, but there are some HTC apps that can be very useful and good looking I came a cross a post on here that has all of them http://forum.xda-developers.com/showthread.php?t=344533&highlight=random+acces
and this link has more apps (for Kaiser) most will work on the wing http://www.cinetsystems.com/xda/index.php?path=Kaiser+Cab+Collections/
thanks your hard work for us,i am from china,and i did the english ROM+chinese language ,i canot wait your ROM out ,and test it.
if it possible ,i hope you may share your kitchen with me ,and i can use it for my english rom and chinese language support.and more chinese people would like it .
let more people use clean ROM
let us work on big storge,and more faster ROM.
and my MSN:[email protected]
for my poor english.
OK. The ROM is flying and it's basically ready for a release as I haven't found any more bugs, so I might do an Alpha release this weekend.
Coool, I can't wait to try it!!!
clean rom
hey to all of you out their looking for a clean rom for the wing. back in my day when I owened a wing I cam across a offical htc hearld wm6 rom the worked with the wings keyboard, if any ones interested I can post it up. you guys can prolly use it as a base to build off of aswell
Santino.. that's like the holy grail of T-mo Wing rom's... please post it.
Regards
sure thing...I had orginally thought that the comunnity was aware of it. ill post it up in the upgrade fourms soon as I get home around 7pm eastern
Oh this would be sooo damn nice, a clean rom! And i sooo hope you get Bigstorage working!
Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.
here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.
Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.
RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?
Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance
Flashing Your First Kaiser Rom (For Noobs)
click the link stylez posted, don't be embarrassed, I was there about 6 months ago
vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d
installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job
Hi guys, i know there are similiar threads out there, but i cannot find a good guide to my question. Please help me out here.
I just got my HTC Diamond yesterday, and had lots, i mean LOTS of difficulty using it.. It too cheem. Haha, so will appreciate any help.
I think it's best to give u my phone infos:
ROM Version : 2.03.707.2 WWE
Speed 528Mhz
Ram size: 192Mb
Windows 6.1
(Need any more info, please ask me.)
Firstly, how do i change the Clock, time format to 12hr, instead of the 24hr clock.
Secondly, How can i turn off GPRS, so i won't have to pay extras in my bills.
Thirdly, SMS is quite difficult, what's the best way to use it with a hand and no stylus.
Fourthly, Is it posible to upgrade the version to 6.5?
Fifth, i saw something abt tweaking, how do i do that? And the only way to lock my phone is the power button is it??
Additional Questions:
There's another question. For example my old contact naming Wei Ming, when transfer to HTC, it change to Ming Wei, HOW TO SOLVE?? This is very important too.
Lastly, when i use MSN, then it import all e emails in my contacts, making it very messy, what can i do?
Please advise how to make my phone to become as user friendly as possible.
Thanks in advance!
Ok first things first yes you can upgrade to 6.5 although it is not officially released you can install it.
there are programs that you would want to install to help you do most of these things. take a look at these 2 threads for programs to help you achieve what you are trying to do.
Themes, Applications and Software <---Diamond sections / Development and Hacking <----General sections
look at Icontact for you contact issue
look for TF3D to configure the themes / wallpaper / and other items in Touch flow.
Any links u can give me to let me dl 6.5?
Storm913 said:
Any links u can give me to let me dl 6.5?
Click to expand...
Click to collapse
hi and welcome to XDA
make sure you read this and understand it before you do anything or you might break your diamond
http://forum.xda-developers.com/showthread.php?t=416211
Hey guys, i really encounter alot problem with it. There are many error reprting that make me send same report over n over again.
Then i could not use advance config, after i install, when i launch it, there a error report.
I cannot sync my contacts with the computer too.
Can anyone help me out quick?
Hi,
A way to disable GPRS is an app called NoData MoDaCo. Search the forum for it.
Also If you look in the settings there is a way to disable error reporting .
You have quite the laundry list of questions/issues. However all of them have been asked/answered in various threads around the Diamond (and other) forums. Please use the custom Google search as it is much more reliable then the default vBulletin search engine.
Thank you,
NATF
I have n unsuccessfully tried 4 times to put on various betas of wm 6.5 on my fuze but each time i end up having to go back to the one i had previously. can anyone please point me to the latest and stable 6.5 ?? Thanx to all.
duuuuudddeee!!!!
ummm...and what makes you think that this is the correct forum section for posting about the fuze? see the top-most bar on this page...see the place on the top-left where it says "xda-developers > Kaiser > Kaiser general"?
use that same bar to navigate to the "ROM Development Section" of the relevant forum section for the fuze (also known as the "Raphael")!
niksha said:
I have n unsuccessfully tried 4 times to put on various betas of wm 6.5 on my fuze but each time i end up having to go back to the one i had previously. can anyone please point me to the latest and stable 6.5 ?? Thanx to all.
Click to expand...
Click to collapse
Are you really trying to put a Kaiser rom on your Fuze ? After you brick your Fuze, can I have it. ?
We should just take it from him, endangering a piece of good tech..
Someone call the Gadget police.
Sometimes i wonder if the average smartphone is smarter than the average smartphone user?
Dibs on your brick
I have the Energy Rom 3.0 and I must say I have only found 1 bug (the contacts display on the dialer screws up when u scroll. Bust that is THE rom to flash if you want stability, speed and reliability. I really dont have anyother to recommend, Ive never had the need to replace my rom. I hope this helps. and...if your looking a Rom for the kaiser and accidentally called it fuze..man im having trouble finding a good rom for the kaiser with 6.5 myself, They told me that PDA Corner Ultimate-X2.V10 was a good one. So there you go.
Deleted... wrong post.
All is Forgiven
ChumleyEX said:
You are not excused..
He gave him info on a fuze ROM to begin with and then mentioned a kaiser one. Please read before downing someone. Ty
Click to expand...
Click to collapse
You beat me.... was trying to delete my post before you posted this message.
welcome
hi guys i'm new to this forum and i'm going to buy the x1 tomorrow hopefully, first i wanted a samsung jet but the x1 is way better because of WinMo, The keyboard and other things wich i really like.
there r few things that i'd like to know, and yes i did some reading first
1- is there any drawback that i might expect from the x1?
2- is it upgradeable to WinMo 6.5?
3- what is ROM development? is it changing the whole OS?
4- what r the mods or tweaks that i might consider to do first?
sry if i'm asking something that is answered somewhere else but i'm new to SE and WinMo so any help will be greatly appreciated
ahmedsalem89 said:
hi guys i'm new to this forum and i'm going to buy the x1 tomorrow hopefully, first i wanted a samsung jet but the x1 is way better because of WinMo, The keyboard and other things wich i really like.
there r few things that i'd like to know, and yes i did some reading first
1- is there any drawback that i might expect from the x1?
2- is it upgradeable to WinMo 6.5?
3- what is ROM development? is it changing the whole OS?
4- what r the mods or tweaks that i might consider to do first?
sry if i'm asking something that is answered somewhere else but i'm new to SE and WinMo so any help will be greatly appreciated
Click to expand...
Click to collapse
1) Xperia is great in many ways, and you would be investing in something that can last for a long time. Right now, there are no serious draw back to it, at least Physical wise. Its been a long time since it's initial release date, so I would expect Ericsson to have tweaked the structure for its advantage. The best part about the xperia x1 is that its very compatible, and can withstand many different types of ROMS
2) In short, yes, but only through ROMS
3) ROMS are to Operating systems as Phones are to Computers; or its the operating system of the phone. Yes, the operating system gets changed when you flash a ROM to your device (Mobile 6.1 is boring anyways). There are a couple ways of doing this, which you shoudl read up on, but in general, you hardSPL your device from your computer using a program (which allows custom ROMS to be transformed to your device), and then use the computer to run a customRUU, in which the new custom ROM is then transferred to the device. There are other ways of doing this, but you can research that yourself.
4) I recommend either Phoenix 2 or valkyrie 6.0, which are custom ROMS with a ton of tweaks already preloaded in them. Go to the ROM threads for more info.
Thanx So Much For Ur reply,
so u r saying that i can have WinMo 6.5 without any mods or with mods?
is this process hard that i might kill the phone or something? if it is not easy like placing some files on the phone and enjoy, can i backup the whole thing so i can flash it back to the state which i bought it in? cause i'm new to the whole WinMo thing, also will it spoil the warranty? cause if so, i'll stick with mods on the normal WinMo 6.1 for a while.
ahmedsalem89 said:
Thanx So Much For Ur reply,
so u r saying that i can have WinMo 6.5 without any mods or with mods?
is this process hard that i might kill the phone or something? if it is not easy like placing some files on the phone and enjoy, can i backup the whole thing so i can flash it back to the state which i bought it in? cause i'm new to the whole WinMo thing, also will it spoil the warranty? cause if so, i'll stick with mods on the normal WinMo 6.1 for a while.
Click to expand...
Click to collapse
Yep, you can either find a clean Win 6.5 ROM with nothing pre-loaded into it, or one with stuff pre-loaded into it. The process is easier than I first thought: just hardSPL your device, which an app does for you, and then do the same thing for ROMS, in which you dowload the ROm, hook up your computer to your phone, and launch the customRUU exe that comes with it. A lot of peopel might say its way more complicated, but this is generally it. Search hardSPL in forums.
nice, thanx for these useful info but i guess i'll stick with WinMo 6.1 for a while now, but i messed it up anyway tried to install mobidiv arabic support but it showed letters backwards so i uninstalled it and now i have no words in some certain places can u refer me to a working mobidiv multilangual support?
ahmedsalem89 said:
nice, thanx for these useful info but i guess i'll stick with WinMo 6.1 for a while now, but i messed it up anyway tried to install mobidiv arabic support but it showed letters backwards so i uninstalled it and now i have no words in some certain places can u refer me to a working mobidiv multilangual support?
Click to expand...
Click to collapse
Did you check here?
http://forum.xda-developers.com/showthread.php?t=525763
thanx so much for ur replay I installed the second one and it worked great, overall the phone is amazing I installed some programs like xperia tweak, and touchresponse, i have a lot of games with the phone but they r all demo i guess all the games out there must be paid for, I just have more questions,
1-what's a manila?
2-I remember I once used internet on a WinMo phone connected to a computer through USB, is it possible with the xperia? I.E. if i have a working internet connection on my computer, can i use internet on my xperia through this same connection via USB cable?
3-Flash support for opera?? I'm downloading Opera Mobile 10 and then try to play a youtube video and see what happens
4-Can u plz refer me to a good music player that has equilizer?
5-Despite the quality of the sound is very good but the volume is low, is there something to raise or boost the volume?
I know these r lots of Questions but i'll really appreciate if u answer
ahmedsalem89 said:
thanx so much for ur replay I installed the second one and it worked great, overall the phone is amazing I installed some programs like xperia tweak, and touchresponse, i have a lot of games with the phone but they r all demo i guess all the games out there must be paid for, I just have more questions,
1-what's a manila?
2-I remember I once used internet on a WinMo phone connected to a computer through USB, is it possible with the xperia? I.E. if i have a working internet connection on my computer, can i use internet on my xperia through this same connection via USB cable?
3-Flash support for opera?? I'm downloading Opera Mobile 10 and then try to play a youtube video and see what happens
4-Can u plz refer me to a good music player that has equilizer?
5-Despite the quality of the sound is very good but the volume is low, is there something to raise or boost the volume?
I know these r lots of Questions but i'll really appreciate if u answer
Click to expand...
Click to collapse
1- manila is another name for Touch Flo 3D, which is HTC's proprietary GUI. Since it's extremely finger friendly and easy to use, a lot of cooks include it in their ROMs
2 - sync your phone using active sync, there is a check box that will let you use your desktop's internet on your X1 as long as your phone is connected via active sync (sorry for being vague, i don't have AS installed)
3 - most cooked ROMs already have flash support for internet browsers. for stock ROMs, there are cabs around that'll give you flash (again, sorry for being vague, i'd been using cooked ROMs for more than a year and all of them have flash)
4- Manila has the Audio Booster app has EQ settings. You can also try windows media player, nitrogen, coreplayer... there are tons of music apps for WinMo
5- Look for the "audiopara" cab somewhere in the forum
thanx so much for these useful info., so is manila a .cab that could be installed, cuz i'm downloading a 33 MB file that is supposed to install touchflo panel it's a .cab i think.
right now i'm looking for a good audio player, and a divx player, BTW can I play Rmvb video files on the xperia??
regarding the audiopara i searched but all i found was related to roms or certain roms: new roms, and others that i don't rembember the name but the prob. is that I don't know which one will work for my x1, can u help me?