Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again
i've read all the posts about installing and running smartskey, yet continue to have a real problem. i placed the .exe and.ini files in a new folder (smartskey) within the windows directory on my device. when i run it, it appears that everything works fine..hold left key opens start menu and hold right closes running application. after a few minutes, holding left key does not open start menu..i hear the system sound, as if it is starting, yet nothing. in fact, i can't even use the touchscreen to open it..must soft reset. any ideas what could be causing this? could it be that i am using wisbar advance and it opens a cascading menu? seems that would not be the problem as it works fine for a few minutes.
solved
well, after visiting the wisbar forum, I have an answer to my own question. smartskey works fine with wisbar, it just craps out when you close the start menu with the softkey. once you do that, the startmenu will not come back up unless you soft reset.
This will drive me crazy. I have had the button above the volume mapped to Voice Command ever since I can remember. Now for the Tilt, it is mapped to Push to talk which I will never, ever use and the button mapping does not allow you to reassign it. Does anyone know if this is possible with any of the button manager programs? Do I need to flash the Kaiser ROM for this?
Also, the 8125 had a feature where you held this button down and it would swap the sound over to vibrate. If anyone knows how to get this working on the Kaiser, I highly recommend it. Beats having to pull the phone out of the holster/case to silence it, especially in a meeting.
Search for the answer.... It is here.
tried searching on push to talk. searching on buttons brings back a ton of results, none of which are specific to this particular problem. any suggestions on where to search and for what term or phrase?
Update, I found one... over in the hermes forum. This would be a good addition to the cab list sticky now that more folks are getting the AT&T ROM.
http://forum.xda-developers.com/showthread.php?t=279585&highlight=push+to+talk+map
I'll update after I have tried it on the Tilt
PTTFix work fine per the tread reference above but even though it allows you to assign a program to press and hold, there is no program "per se" to enact the vibrate setting. I do see this option on the HTC Home Screen though so maybe it is possible to create a shortcut in the Program Files directory and call it indirectly. I'll try this later when I have some time, but if anyone else gets to it first, please do share. TIA
this will do it for you.
I was never a fan of PTT anyway... Thanks for the CAB Tim. Works like a charm. For those curious, the option to select Vibra switch will be found under Settings > Buttons. Remap Button 6 to Vibra (Switch).
Spoke too soon. The PTTFix cab showed the buttons under the setting window, but after setting them, it still brought up the PTT screen. I though perhaps it needed a soft reset, and after doing so the ability to remap the PTT button disappeared.
isdereks, did you try this on the Tilt or the Kaiser? I am thinking the latter, since the PTTFix.cab shows the PTT button as a second button 5. Perhaps this is part of the problem of why it looks like it allows the setting, but doesn't actually work.
Bummer. I am quite disappointed. On top of all the bloatware, you get a button that launches an app that immediately errors out as I am not a PTT subscriber. HTC and MS should be pissed that AT&T is making the iPhone look like a clear winner. Pretty soon Apple will be running comercials with the big bloated guy for the iPhone too.
Sorry forgot to mention that I did this on the Kaiser.
yeah the new PTTFix did not work on my tilt, but worked great on my 8525. I hope this gets updated for the tilt.
http://forum.xda-developers.com/showthread.php?t=334759
yeah tried all that and the reg settings do not stay after phone is shut down.
Worked for me. You have to read the whole post.
For my own purposes as well, here are the consolidated steps to take. Until someone improves on this, I keep all this stuff in a directory so I can reconfigure my device as necessary. Here goes...
I think the trick is the PTT settings take precedence when the device boots up so delete the PTT registry settings under HKLM/Services/PTT. Delete the whole sub tree, then
From HKLM\Software\Microsoft\Shell\Keys
Add a new key called "40C6"
Add a string under the key called "Name" with the value "Button 6"
Add a new key called "40C7"
Add a string under this key called "Name" with the value "Button 6 (hold)"
(Note, do not enter the quotes, thare are to delimit what belongs in the registry entry)
Go to the Buttons settings and assign a program to the new entries. I di Voice Dial and Vibra (Switch) from the link earlier in the this post.
Do a soft reset which will remove the PTT settings from the buffer and enable your key changes.
Thanks for all the help.
I'd say the only caveat is if you some day want to use the PTT features, it would be a good idea to take an inventory fo what is under the PTT node in the registry.
It worked "GREAT". Thanks and so easy even I could do it
Instead of deleting the "PTT" key, i suggest simply renaming it to "PTTbak". That way you can just rename it back to "PTT" if you ever need to use it.
Thats what i did, and it works fine.
BTW, excellent work everyone. After upgrading to the tilt from the 8525 i lost 2 side buttons (comm manager button and the PTT button)... now i've got at least one back!
Maybe someone could offer a suggestion. For the life of me, I cannot get the reg entries of 40C6 and 40C7 to stick. I am using PHM Registry Editor. I am powering down and back up. Anyone have any suggestions?
Gator5000e said:
Maybe someone could offer a suggestion. For the life of me, I cannot get the reg entries of 40C6 and 40C7 to stick. I am using PHM Registry Editor. I am powering down and back up. Anyone have any suggestions?
Click to expand...
Click to collapse
did you delete the ptt key? (or at least rename as was suggested above?)
if you did try using the phone for while after you make the registry changes - run some other programs - then power down
greg
Greg, I renamed it and then nothing would happen. no button map and no PTT action. I am about ready to give up. But I will try your suggestions. Thanks.
NOw I got the PTT action back (the PTT screen pops up) but I cannot get the the button to do anything. I made the hold vibra and the direct push VC. Now nothing happens. Not sure what I did wrong. Not a noob at reg edits and I don't see anything wrong.
Oh well, not that big a deal, but am still open for more suggestions.
i tried renaming the PTT registry key and it didnt work. actually deleting it worked.
REG PTT
After doing the reg posted above the PTT button is free but you will notice after you push it, before the new app assigned to it pops up you will see the ptt screen for a second. What if the phone things you are using the ptt function and not Voice command or Viigo like I am?
While WM 6.1 now allows for buttton 6 to be reassigned, any attempts to add 40c7 to the registry (Button 6 (Hold)) gets wiped when you do a soft reset. Is it necessary to kill the PTT key like we previously had to in WM6?
anyone tried this yet?
Well, its just easier to have a program that intercepts button presses. Such as... aebuttonplus! You can have double presses, long presses(hold) and etc. good software to check out.
Another solution is to just make a .reg file with desired entries and toss it into the startup folder, that way it will reapply on soft-reset. Goodluck!
Yes you need to delete PTT
This is what I found on another thread. http://forum.xda-developers.com/showpost.php?p=2573250&postcount=41
It fixed it for me.
Hi folks,
I have gathered a few questions you might be able to help me with.
Using: O2 XDA Diamond, Olinex 2.4 unsigned, Radio 1.09.25.23, Panosha Simple 1.1, the usual tweaks
1)
GSen. It might be useful to some, but I just don't need this flipping anytime I move the device. I renamed the gsen.exe to prevent it from being loaded on startup. This works, but I get a nasty error message, of course. That doesn't bother me, but I'd still like to know if there's a more elegant solution to this, like a registry entry disabling GSen altogether.
2)
Is there a way to make pressing the little "cross" button (top right corner in most apps) close applications instead of minimizing it? To finally kill a program I have to use the task manager. Any idea how to add a little more power to this button?
3)
About composing messages: Entering a name in a new message used to make the corresponding contact entries popup in formerly used ROMs. That's no more. I now have to open the adress book, choose a contact and select "Send Text Message". How can I get the lost feature back?
Regards,
ziphi
Not sure about 1 & 3, but for 2 unless it's been altered in the ROM your using, goto Start>Settings>System>Task Manager>Button, you can change the action the small cross does.
Thanks,
but this seems to have been changed in Panoshas ROM, there's no "task manager" option in the settings.
Anyone else got an idea?
Managed to solve problem No. 1)
Deleted shortcut file for GSen in /windows/startup/
Problem No. 3 is what disturbs me the most, now. Any ideas?