Don't know if anyone else has had a problem like this...For some reason, some of the buttons and settings choices on the three tabs of the settings menu on my tilt disappear and don't come back unless I soft reset the phone. I am running Windows Mobile 6.1 and have the Dutty's Offial Fix ROM version. Anyone have any idea what I can do about this?
Thanks In Advance.
P.S. The Missing items are as follows:
Personal Tab:
Keyboard Sliding Sound
Voice Command
System Tab:
Backlight
Clear Storage
Device INfo
Key lock
Long Press End Key
Microphone AGC
Power
Task Manager
Touch Flo
Connections Tab:
Bluetooth SIM Access
Connection Setup
CSD Line Type
GPRS Settings
HSDPA
Network Plugin
SMS Service
Related
I am trying to lock down the Hardware buttons on my m700 using
PHM Regedit I can lock down all buttons successfully except the Windows button using
Flag SET TO 9 ON BUTTONS 40C1 etc in registry
I am also using askarya PocketKiosk Builder 2.6 which on soft reset the task manager works again.
Unfortunately there appears to be a bit of a bug. Although I disable all hardware buttons the and only allow through my own applications it still after a soft reset then reactivates the windows hardware start button allowing access to the menus ontop of my allowed app, simply meaning you can access all programs and settings. (Bit pointless really)
Can anyone help me lock down the windows button and the 4 way navigation pad. Is there any reg tweaks or other suggestions you can help me with
Thanks in advance
I am looking for a quick and simple application/script that will allow me to turn on & off 3G, but still allow EDGE/GPRS to work. I'd like something I can just assign to a hardware button or as a shortcut.
I've tried BandSwitch and looked at phonealarm and neither are what I'm looking for. I tried the 10 button commgr, and it didn't want to work for me.
Maybe you can do something with using MortScript. With MortScript you can check the presence of a connection, connect and disconnect a connection.
After creating a script you can assign it to a button or a shortcut.
Mortscript is worth investigating.
Until I get around to playing around with Mortscript this is what I did.
I created a shortcut to the Band tab in the Phone settings app. This enables me to switch between GSM/3g and power cycle the radio with a couple of screen taps. As long as the shortcut is located in /Windows/StartMenu/Programs, it will be picked up by the buton mapping app and will be available to be mapped.
On my Vario III the shortcut properties are
Code:
"ctlpnl.exe" cplmain.cpl,20,3
Hi,
I am trying to find a way of assigning the hardware key to launch the backlight application. Preferably the button the the top left of the device which is currently used for the voice speed dial.
Any ideas?
Thanks
Ronan
I changed mine from Voice Dial to Comm Manager by going to the button icon in settings and there is a list there, Im not sure what programs are on there but its a start.
xtremdremz said:
I changed mine from Voice Dial to Comm Manager by going to the button icon in settings and there is a list there, Im not sure what programs are on there but its a start.
Click to expand...
Click to collapse
Hi,
Thanks for the advice, unfortunately the backlight option is not on this menu. I wonder if it is possible to add it via registry entry or some other means.
Ronan
hmm i kno there is some kind of "display off" program u can find, then u can go under the buttons settings and select that program to be under a certain button... see if u can find it, ill try and find a link for it and send it to ya.
I've searched through the forum but can find nothing about this problem.
For some reason the quick menu no longer drops down.
When in a program or menu such as programs (WM) the icon top right has the X or ok on top of the quick menu icon, both showing as in screenshots.
I have triend enabling and disabling quick menu in Settings -> System -> Task Manager -> Button.
you need to pick one x button or the other
if your gonna use windows go into quickmenu options and disable the x button and all related options
if your gonna use quickmenu x than go and disable windows task manager via control panel
I want to use quick menu, so I have both Enable the "X" button end running programs and Enable Quick menu on today screen, which i'm sure was default (i have htc rom 1.37.405.1 wwe). then when pressing button, list would drop down with x, spanner, and mem icons and list of running programs. this no longer happens.
to disable win task manager in control panel do you mean in the registry. if so which key, i can only see default and group.
Installing some other applications can interfere with HTC task manager and give exactly the symptoms you describe. For me it was installing Spb Mobile Shell. Sometimes after a soft reset it would work for a while and then stop working. Sometimes it wouldn't work at all. Could this be your problem?
Could be I suppose although it was working fine for at least 3 days after installing and using spb. Could it be from using task manager through spb and if so is there a way of changing it?
anyway i might get rid of spb mobile shell as i don't think it's that good and see if that solves it.
SOLVED: or at least back to normal after removing spb mobile shell disable buttons in task manager disable touchflo soft reset and enable all again.
update: i've installed spb again to see what happens, so far quick menu is still working so I'm guessing problem occurs when task manager is used through spb.
ytboy4 said:
I want to use quick menu, so I have both Enable the "X" button end running programs and Enable Quick menu on today screen, which i'm sure was default (i have htc rom 1.37.405.1 wwe). then when pressing button, list would drop down with x, spanner, and mem icons and list of running programs. this no longer happens.
to disable win task manager in control panel do you mean in the registry. if so which key, i can only see default and group.
Click to expand...
Click to collapse
The Original Task Manager can be deactivated from Settings/ System/Task Manager
all the best
I'm having this annoying problem lately. I can't change the active SIP anymore. It used to work (press on the small triangle next to the SIP show/hide icon), but now I press it and no selection comes up. It's really frustrating.
I can only change the default SIP by altering the registry, but then I have to reboot, so I don't like this approach.
Has anybody else experienced this?
Yes I have this problem. Just go into the help menu on the start tab and there will be the little keyboard on the bottom right this one seems to work on my Diamond but nowhere else.