Related
No matter what ROM I use, whether its the latest official O2 one or "Pugs" Edited version of it with the 1.03 Radio version, it ALWAYS installs the O2 Active UI.
After every Hard Reset, once Windows has been set up, the device ALWAYS says "Customising in 3 Seconds" and then starts to run a load of installers on which the cancel button does nothing. Then, after these have finished, it asks the "Personal or Corporate" question, and whichever I tick, the O2 Active application is ALWAYS installed at the end of this.
How can I get rid of it? From what I have read, selecting "Corporate" stops the O2 Active program getting installed, but this is NOT true, atleast, not on my XDA2i.
Is it possible to get my device working with Pugs edited latest ROM version with Radio 1.03, WITHOUT having O2 Active installed on it?
Any help would be appreciated, as it is probably a simple fix,
thanks,
Darren
it does
once it asks you for personal or corperate
put a tick in corerate and just underneath enter a password 0506 & that will put it into corp mode
& if you want to gprs settings here they are
connection name
mobile web
modem
cellular line gprs
access point
mobile.o2.co.uk
user name
o2web
password
password
advanced
use server assigned ip
servers
use specific
193.113.200.200
193.113.200.201
Re: Corp install and phone carrier settings
When the option screen appears, if you do not put the corp settings in, it will automatically default the UI install after a few seconds, after you put the code 0506 I think you have press 'enter'.
For your installation of GPRS/WAP/MMS, please follow this link. http://forum.xda-developers.com/viewtopic.php?t=26463 As I have uploaded all the latest Mobile carrier cab installs (V2.0) for the UK, for both contract and PAYG. Just copy the correct cab to your pda device and click to install, simple as that. :lol:
Turns out I bodged my own solution to this problem!!
When it tells you it will Customise the Device in 3 Seconds, Press the SOFT RESET button!
This will reboot the XDA2i into Windows and will NOT run any of the O2 Installers, and so none of the O2 Active will be Installed.
This means that I do not even get asked the Personal or Corporate question.
Thanks for the help tho,
Dazzer.
I have uninstalled the O2 active UI by booting in safe mode and then uninstalling it.
However on rebooting it now says that connections.exe cannot run because some files or libraries are missing.
Can I find out what it has uninstalled and put it back manually as I don't want to have to do a hard reboot and will the cab mentioned above do this?
Thanks
I have uninstalled the O2 active UI by booting in safe mode and then uninstalling it.
However on rebooting it now says that connections.exe cannot run because some files or libraries are missing.
Can I find out what it has uninstalled and put it back manually as I don't want to have to do a hard reboot and will the cab mentioned above do this?
Thanks
Guys,
I'm not able to remove any programs via activesync from my wizard.
I can see the programs listed in activesync but I can't remove any of the installed programs; it's driving me crazy!
Please help!
Cheers,
Arne
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Have the same problem, Windows can not delete programfiles. When i install an update of a program, the setup failed. If i delete files manualy i can install the update. Had the same problem with original rom.
hellejoep said:
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Click to expand...
Click to collapse
Try....
Start > Settings > System > Remove Programs.
This should do what you are after.
my dear friend thats the problem....by doing any of the above i cannot uninstall any programmes ...it say cant remove programmes but do u delet it from your list of removable progrrames...funny
Same here. Minimo would not uninstall
went to remove prog. it said it did but all it did was remove it from the remove programs list.
Hard reset here we go. Pocket mechanic was the same for me.
It's ok when you exactly know where the program is installed - you should simply delete its files. But how can I upgrade to .NET CF 2.0?
Installer can't remove previous version and I can't delete files manually cause I don't know what files to delete :-(
I've had the same problem trying to remove minimo and the Atomic Cannons Demo. :? So far these are the only items I have tried to uninstall. I just deleted the folders and shortcuts, but I'd rather figure out what's causing the problem!
Running the QTek test ROM (WWE) on a US Tmo MDA.
I also have that. however most of the time it works for me to soft-reset and then remove. for some reason that works (for me)
I would recommend a soft reset just prior to removing software from a WM5 PPC. WM5 only minimises most programs instead of closing them when you click the X so the application stays open therefore files are still in use which prevents a successful removal.
Even if the progam has been closed by Start>Settings>System>Memory>Running Programs or a task manager like in SPB Pocket Plus there is a chance that there are still associated files locked open unless a soft reset is done before uninstall. Windows Applications on the desktop will normally prompt for a restart after uninstall if files were in use however it looks like the majority of Windows Mobile apps (or Windows itself) dont have the same functionality (some Mobile apps do prompt for restart but not very many).
Also, apps with today screen plugins should be disabled, before a soft reset then uninstall the app as WM seems to lock the files open when active on today screen as well.
I havent had the uninstall error once since i have done a soft reset before uninstalling any software, hopefully others will have the same success. I know this wont apply to every situation but so far so good for me. :wink:
Cheers
Chris
Puckster is right.Run your task manager to see all runing programs and close them before trying to uninstall or simply soft reset prior to uninstall.It works without a flaw.
I have Tytn II with L26_Kaiser_Diamond_V5 (Hybrid 3.29.707) Rom.
Installed Calligrapher 8.6 and unable to select either writeanywhere or writepad from the SIP menu or by anyother means. In short after installing calligrapher and softresetting i am not able to use it.
Can anyone please help
Don't know if it will work or not but, you might try installing the Default_IM_WM5.cab or SipChange.cab and see if one of them will let you select it.
no success
^^ Solution -- not working
Assuming-
1. you installed with the desktop loader EXE
2. you had an active ActiveSync session and your phone was properly connected and
3. you selected to have both Write Anywhere and Write Pad SIPs selected when finalizing install to PPC
You should have entries for both in the SIP and a folder under programs with the EXEs. If you cannot find any of this you haven't properly installed the program.
Reconnect your phone and make sure you have an active Sync session, run the setup EXE from your desktop and follow the instructions that appear on your screen. (See pic)
Yes of course
The program was installed from the desktop pc and softreset was done. Both writeanywhere and writepads are installed and it is shown on the list of SIPs (when we click small arrow near the keyboard icon) but unable to select them. I am able to access the options menu of calligrapher from Start>settings>system>calligrapher.
ok now do this
http://forum.xda-developers.com/showthread.php?t=301433
Please see the image
boomermax
I had done that yesterday itself but the problem is menu showsup faster but unable to select writeanywhere or writepad.
so basically I've been no help at all...LOL
I'm sure you've uninstalled and reinstalled and have probably have redownloaded a fresh copy and tried installing that...
what happens when you select it from programs? Nothing?
Reinstalled
Reinstalled few times, when i select from programs nothing happens adn i don't know is it the problem of the L26 ROM or Windows 6.1 or the Calligrapher 8.6 --
if some one can help i will be grateful
Earlier also there was some problem without a solution for someone
http://forum.xda-developers.com/showthread.php?t=353077
try disabling the cube if you have it. I had this problem with transcriber, worked after I disabled the cube.
NO CUBE
I don't have cube but transcriber is working perfect only i have problem with calligrapher
still probably no help
have you tried having the installer remove transcriber from SIP during install?
Yes of course
Even without transcriber calligrapher will not work.
what if you tried this sequence and substituted calligrapher for the keyboard install?
http://forum.xda-developers.com/showpost.php?p=2271142&postcount=692
Phatware states calligrapher doesn't play well with third party apps that affect touch screen behavior and that is probably the problem here
not yet
^^ done without success
posted in another forum in reference to SIP troubles and Calligrapher...
"The main difference between CalliGrapher 8.6 and all previous versions is that it has been compiled with recently released Microsoft Visual Studio 2008. It is remotely possible that the new compiler has performance issues, but we have not heard anything about this and have not seen any evidence in our internal tests. The only difference that we’ve noticed when using the new development tool is that size of the compiled binary files slightly increased.
We will continue testing and will post additional information if we have any. "
Maybe trying previous version might help.
Also, taking the logic from this thread http://forum.xda-developers.com/showthread.php?t=398091 it might serve you to start from scratch and reload ROM then tackle this calligrapher issue then move on to loading other applications.
Partially success - Hard reset
I have done a hard reset.
installed first the calligrapher 8.6
soft reset
installed default_im_cab
changed sip through default_im_cab as writeanywhere
soft reset
Now writeanywhere is available and working in all applications except for Lexisgoo dictionary 3.1.1
Any help or suggesstions?
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
last thing i attempted to install via ActiveSync is the Microsoft WM Update - KB958639
now my kaiser is rebooting after i enter the startup pin password.
it doesnt seem to have installed the update. it loads the today screen with manila 2d and then begins the cab install process but then resets. it keeps doing this.
i can still sync with outlook/active sync, access files via the PC, etc. if i dont put in my password on the phone to unlock it...
i tried to delete the update from the \windows\appmgr directory but it tells me access denied.
any other way i can remove these files or stop the installer from loading during the next reset? i'm lookin into a reg location that it might have startup entries for this sorta thing...
ok nm, i solved it. the ActiveSync add/remove programs tool allowed me to uncheck the app from install. was weird, cus before it was already uncheck.... oh well all is well