I was wondering if it were possible for someone to make it so i could use a mini usb to 3.5 mm headphone jack converter that came with my old phone, the motorola slvr. i tried but it doesnt work and i dont wanna buy a new one from htc. pleaze help.
assassin82492 said:
I was wondering if it were possible for someone to make it so i could use a mini usb to 3.5 mm headphone jack converter that came with my old phone, the motorola slvr. i tried but it doesnt work and i dont wanna buy a new one from htc. pleaze help.
Click to expand...
Click to collapse
you can get them for like 5 bucks from amazon
i dont really wanna buy one but thats the cheapest i have seen. tnx
If you can solder it's easy to make one, but you're going to need an htc plug, not usb. It's proprietary and you need the wires, or you might be able to rewire the mini-usb but I haven't tried.
Email me from inspiritmedia dot com contact page. I already have one of these made from my 8525 that works.
Related
I need to replace htc kaiser (Kaiser 130 if this matter) usb but i dont know USB product code. Can someone post it here?
Thanks in advance!
If you mean the USB port on the bottom of the handset, it is part of the flex cable and cannot be bought separately. Flex cables are usually less than $100US.
balsack said:
If you mean the USB port on the bottom of the handset, it is part of the flex cable and cannot be bought separately. Flex cables are usually less than $100US.
Click to expand...
Click to collapse
ahhh crap.. in service they told me this is can be cheply replace by other usb port but they not have it in stock so i think i buy it and replace by myself.
@edit
but still i dont know. What's USB in KAISER?
Yes it can be bought
rhyre said:
ahhh crap.. in service they told me this is can be cheply replace by other
Click to expand...
Click to collapse
Indeed it can be replaced. It's a part made by a Taiwanese connector manufacturer Acon (www.acon.com) and if you look on the service manual (accessible through links on the wiki) page 92 shows the connector as Con5 and part no MJE21-11K7P20. Good luck finding someone to supply it but your countries agents for Acon may be a place to start. There are also companies that offer a USB socket replacement service where they do all the work as well as supply the part. Search the USB port failure related threads here for details as their name escapes me.
i have been using my motorola razr charger on my tilt and now its loose and wont charge right, my oem tilt charger still works. anyone else experience this?
can someone post on how easy it was for them to replace the miniusb?
just need to solder it on..its quite easy
easy? for newbies is quite harder with no skills I sugest to you do not do this because you can brick your pda.
rhyre said:
easy? for newbies is quite harder with no skills I sugest to you do not do this because you can brick your pda.
Click to expand...
Click to collapse
Hi,
I don't know where's re located, but many people in the US had very good experience with some companies specialised in PDA reparation. You may want to make a forum search for "broken usb" or similar.
can someone please post on their experience and where is the best place to get the USB connector for the att Tilt, possibly post a tutorial or youtube video on how to do it?
my solution!
hi from germany,
actually i had the same problem with the kaiser a few weeks ago and i searched the whole internet for the usb connector in order to replace my broken one. NO CHANCE!
I call HTC Germany and HTC USA and they were not able to tell me the specifications of the connector. One thing i can say for sure. HTC is NOT! using a standardized USB connector as it is built in other devices (nokia n95, motorola razr etc.).
My solution was: I ordere a display-damaged HTC Tytn 1 and gave it to an electrician who did his job well. He replaced my Kaiser USB connector.
Pretty annyoing, but it worked for me.
Much success to you1
Hi i'm currently looking online where to by the two (i think) GPS and WIFI clip on cables, dont know what their called?
would love to see hem on ebay but i cannot find them
anybody help? where can i buy them or what they are called?
thanks in advance.
FYI: the two small cables inside the diamond wich clip onto the PCB's, not external cables.
EDIT: am i on the right track as this connector seems the same? is the connectors calles "U.FL Mini" connector? would this connector be correct and fit?
thanks
Does nobody know then? lol... i'm at my wits end trying to find these cables never thought it would be this hard, they both snapped on me and now i dont have good GPS/WIFI reception. please help somebody...
bump, sorry... does anone have any to sell me then, why is it hard to find these, not even ebay has them google results in 0, really bugging me now, what other phones has these? somebody must know something... xda dev is the source of this stuff man, i even went as far as ringing HTC bu they cant tell me where to find them or what they are called, i apparently need to send it in, pfft for the cost of what lol.
hellooo. Baught an OEM HTC miniusb to 3.5 mm stereo converter for my g1. Tried headset/speaker widget. no go. When i plug the headphones (with adapter of course) no sound out of headphones. Any ideas or fixes for this? Thanks
what radio do u have
stock radio version. think the newest radio would make any bit of difference for this matter? when i hear "radio" i imagine the part of the phone that gives signal.. am I wrong?
just flashed newest radio. didnt fix a thing.
did a bit more research.. and realized that the adapter i have - although HTC OEM - is only 5-pin, and to my knowledge I am in need of an extUSB --> 3.5mm
So... would THIS http://cgi.ebay.com/NEW-EXTUSB-TO-3...d255487e5&_trksid=p3286.c0.m14#ht_2389wt_1165 Be the correct thing for my g1?
Also, Would THIS http://cgi.ebay.com/USB-11-Pin-to-3...5a2d3d8ee&_trksid=p3286.c0.m14#ht_3568wt_1083 Work? Anybody ever used one? Looks kinda huge..
my OEM htc adapter wont work by itself. I use the headset toggle widget and it works perfect. You insert your adapter and click the widget twice.
nahanee20 said:
my OEM htc adapter wont work by itself. I use the headset toggle widget and it works perfect. You insert your adapter and click the widget twice.
Click to expand...
Click to collapse
yes I tried and, and a radio update, and pushing stock audio files. i think i need an extUSB plug.. can somebody please confirm? becuase this 5-pin that i got said to work with the G1.
Can somebody please confirm that the above products are what i need or otherwise!!
i think mine has 6 pins
oraeanast said:
Can somebody please confirm that the above products are what i need or otherwise!!
Click to expand...
Click to collapse
dude be cool... your dream should have come with an adapter when you bought it. if anything, go to frys buy the HTC adapter they sell. make sure you dont buy one made for blackberry or samsung. HTC makes one that they sell.... it may be the one you bought and you may have just gotten one with a bad pin. happened to me before
on a better note. i hope you get it working, i know it can be frustrating when you have a fine piece of technology like the dream and want it to work at its full potential
palosjr said:
dude be cool... your dream should have come with an adapter when you bought it. if anything, go to frys buy the HTC adapter they sell. make sure you dont buy one made for blackberry or samsung. HTC makes one that they sell.... it may be the one you bought and you may have just gotten one with a bad pin. happened to me before
on a better note. i hope you get it working, i know it can be frustrating when you have a fine piece of technology like the dream and want it to work at its full potential
Click to expand...
Click to collapse
did not obtain my dream through HTC or t-mobile, got it on craigslist and came with nothing. not sure what frys is? but im just going to try an HTC extUSB changer from ebay. Thx
I bought a galaxy s on ebay, was like new a week old.
Found it to be very fast and amazing but the headphone port seems to be having problems. only one side of the headphones work for some reason and if i twist the headphone jack inside the port and hold it at a certain place occasionally both work.
Have tested in 4 different set of earphones which are fully working and I get the same problem. If I unroot my phone and ask the seller for the original reciept will I be able to get the phone repaired under warranty?
thanks
My usb port didnt work anymore after a week i got this phone. It was sent back rooted and had unofficial firmware. They replaced the port for free however. You need the receipt though..
The samsung employee told me they didn't care about unofficial software. The procedure to make everything default is a 10 sec job
You replacement will be under factory warranty, just like mine
rizzy123 said:
I bought a galaxy s on ebay, was like new a week old.
Found it to be very fast and amazing but the headphone port seems to be having problems. only one side of the headphones work for some reason and if i twist the headphone jack inside the port and hold it at a certain place occasionally both work.
Have tested in 4 different set of earphones which are fully working and I get the same problem. If I unroot my phone and ask the seller for the original reciept will I be able to get the phone repaired under warranty?
thanks
Click to expand...
Click to collapse
I had same problem. Brought it to SC and they found out headset was faulty. Replaced headset. Headset/accessories only 6 months warranty. So go get it checked out. They didn't even check the phone. So I won't worry too much about custom roms unless you really have an issue with the phone itself.
God bless.
Thanks for the replies. Found out it was due to the fact that the gel case I have on my phone prevented the headphone Jack going all the way into the port. Stupid mistake I know but at least I know its now sorted.
Sent from my GT-I9000 using XDA App
I think my micro usb port is broken beacsue when i try to connect my phone to the pc i phone make a sound that it is now changing but i dont see it pop up on my computer. I wanted to replace the part but i was wondering since the AT&T and T moble version are about he same with out the whole "lte" can i use this board to replace with the At&t board?
This is what i was gonna buy:
http://www.amazon.com/Samsung-Microphone-Charging-Connector-Replacement/dp/B00CGDUKV8
Cornbeef3000 said:
I think my micro usb port is broken beacsue when i try to connect my phone to the pc i phone make a sound that it is now changing but i dont see it pop up on my computer. I wanted to replace the part but i was wondering since the AT&T and T moble version are about he same with out the whole "lte" can i use this board to replace with the At&t board?
This is what i was gonna buy:
http://www.amazon.com/Samsung-Microphone-Charging-Connector-Replacement/dp/B00CGDUKV8
Click to expand...
Click to collapse
I would have to say NO!
from your link...
"Samsung Galaxy Note i717 Micro USB Slot USB Microphone Mic Charger Charging Port Dock Connector Flex Cable Ribbon REV1.0 Replacement For Samsung Galaxy Note i717"
That is not even a sgh-t999 /sgs s3 device's board.
I have the same problem mine isnt charging. but from what I have seen the "port" is on the main board and is not an easy fix, unless your skilled in soldering. [heres where my nasa soldering skills come in handy]
Would also like some direction as to where/what to buy....
Thanks
Edit 0:
I found this looking around on amazon:
http://www.amazon.com/Original-Genu...im_cps_91?ie=UTF8&refRID=1F90DC9HWRDBRN3QA19D
has the correct model # listed and from my "googleing" this is the only way to change the part...no easy board swap like other samsung models... :/
Edit 1:
Ok I bit the bullet and ordered this one:
http://www.amazon.com/gp/product/B00A6960P4/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
wont be here till june sometime because its coming from hong kong... but I can wait..had the best price..Hope it dont bite me in the a$$...
Edit 2:
I stopped at one of those screen repair shops that have poped up at our local mall, just to ask if they do port repairs...He pulled out an S3 main board with the conector on it. From what I could tell I did get the correct part. It will be interesting to say the least to get it off and replaced. Will update after I get my part next month. At least knowing what I am up against is a relief.
from what i researched the att & t-moble version are identical, only that the Att&t version can get lte but i took my phone apart and the boards are the same, so ima give it a try.
RoxAbout said:
I would have to say NO!
from your link...
"Samsung Galaxy Note i717 Micro USB Slot USB Microphone Mic Charger Charging Port Dock Connector Flex Cable Ribbon REV1.0 Replacement For Samsung Galaxy Note i717"
That is not even a sgh-t999 /sgs s3 device's board.
I have the same problem mine isnt charging. but from what I have seen the "port" is on the main board and is not an easy fix, unless your skilled in soldering. [heres where my nasa soldering skills come in handy]
Would also like some direction as to where/what to buy....
Thanks
Edit 0:
I found this looking around on amazon:
http://www.amazon.com/Original-Genu...im_cps_91?ie=UTF8&refRID=1F90DC9HWRDBRN3QA19D
has the correct model # listed and from my "googleing" this is the only way to change the part...no easy board swap like other samsung models... :/
Edit 1:
Ok I bit the bullet and ordered this one:
http://www.amazon.com/gp/product/B00A6960P4/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
wont be here till june sometime because its coming from hong kong... but I can wait..had the best price..Hope it dont bite me in the a$$...
Edit 2:
I stopped at one of those screen repair shops that have poped up at our local mall, just to ask if they do port repairs...He pulled out an S3 main board with the conector on it. From what I could tell I did get the correct part. It will be interesting to say the least to get it off and replaced. Will update after I get my part next month. At least knowing what I am up against is a relief.
Click to expand...
Click to collapse
WOOT! Got the part today! Way earlier than they said. Now to find some P/Q to take it apart and put it in...
RoxAbout said:
WOOT! Got the part today! Way earlier than they said. Now to find some P/Q to take it apart and put it in...
Click to expand...
Click to collapse
I got the part today and it worked like a charm
RoxAbout said:
I would have to say NO!
from your link...
"Samsung Galaxy Note i717 Micro USB Slot USB Microphone Mic Charger Charging Port Dock Connector Flex Cable Ribbon REV1.0 Replacement For Samsung Galaxy Note i717"
That is not even a sgh-t999 /sgs s3 device's board.
I have the same problem mine isnt charging. but from what I have seen the "port" is on the main board and is not an easy fix, unless your skilled in soldering. [heres where my nasa soldering skills come in handy]
Would also like some direction as to where/what to buy....
Thanks
Edit 0:
I found this looking around on amazon:
-cut-
has the correct model # listed and from my "googleing" this is the only way to change the part...no easy board swap like other samsung models... :/
Edit 1:
Ok I bit the bullet and ordered this one:
-cut-
wont be here till june sometime because its coming from hong kong... but I can wait..had the best price..Hope it dont bite me in the a$$...
Edit 2:
I stopped at one of those screen repair shops that have poped up at our local mall, just to ask if they do port repairs...He pulled out an S3 main board with the conector on it. From what I could tell I did get the correct part. It will be interesting to say the least to get it off and replaced. Will update after I get my part next month. At least knowing what I am up against is a relief.
Click to expand...
Click to collapse
This is the forum for the T879, why are you talking about T999?
ssuperkid5 said:
This is the forum for the T879, why are you talking about T999?
Click to expand...
Click to collapse
whoopsie
Prolly cuz im blind and didnt post with my glass's...
:/