Related
Anyone know how to sync with Windows 7???
I've tried to install Windows Mobile Device Center 6.1, but it don't recognize my phone.. And ActiveSync won't even be installed due to compability reasons. (Doh, it's Win7)
I really like Win7, so it would be great to sync the phone
Try another cable or something, the mobile center should work.
ChumleyEX said:
Try another cable or something, the mobile center should work.
Click to expand...
Click to collapse
But the mobile is charging =/ So i don't think something is wrong with the cable and it worked just fine in XP (ActiveSync). And when I connected the mobile first time, the PC recognized it and installed the drivers for the mobile and the ActiveSync started on the mobile. Should it start on the phone when mobile center is running on the PC?
So does that mean you didn't try anothe cable? Because if you had researched this sort of thing (aka searched) you would find that the cables do this quite often.
phjott said:
But the mobile is charging =/ So i don't think something is wrong with the cable and it worked just fine in XP (ActiveSync). And when I connected the mobile first time, the PC recognized it and installed the drivers for the mobile and the ActiveSync started on the mobile. Should it start on the phone when mobile center is running on the PC?
Click to expand...
Click to collapse
i don't know what is the issue for you as i have win7rc1 and i can sync fine using the mobile device center.
If you are using 64bit Windows 7 then you need to download the updated drivers for the HTC. I am not sure exactly where Microsoft has these located, but it automatically downloaded and installed the new USB drivers that it needed just the other day for me......
Works excellent. I was using the 32 Bit version of Windows 7 before this and even though its based under Vista couldn't get it to synch up.
I have Win7 64 bit...with internet already established through another source, when I plugged in my tilt, it found the driver and installed it and has worked flawlessly ever since.
Works fine for me too on Win7 x64.
First, try another cable. USB has 4 connections, only 2 are needed to make it charge, but for communication it needs all 4. Maybe try another USB port on your PC as well.
And as said before, make sure you have an internet connection so it can download the drivers.
WMDC is already built in with Win7, so don't install any other versions from Microsoft Download Center.
Works fine for Win7 x64.
but Win7 x86 "NO"
you can use virtual XP mode for 32bit version
Updates?
Hi. I had this same problem following a hard-reset of my phone. After a while of searching I found that an update (designed for Vista) is available on the microsoft website. Downloaded, installed and sync worked first time. Yey
It should work with Win 7 RC 32 bit - does for me!
mouradlayeb said:
Works fine for Win7 x64.
but Win7 x86 "NO"
Click to expand...
Click to collapse
Then you're doing something wrong (such as not having the TyTN II correctly connected to your desktop PC or not having internet access on it to download whats required perhaps). I plugged my TyTN II into my Win 7 RC (32 bit) PC and after a bit of hardware detection and some automatic downloading it works (allbeit still with slow file tranfers but at least the UI is better than Win XPs Activesync). Welcome to xda-dev by the way
I think that it matters wether or not it's Windows7 RC.. Right after it came out someone was using the beta and it wouldn't work for them.
ChumleyEX said:
I think that it matters wether or not it's Windows7 RC.. Right after it came out someone was using the beta and it wouldn't work for them.
Click to expand...
Click to collapse
I was wondering the same but as the RC version is still avail for free until 20 Aug, anyone with the Beta should be formatting and installing this instead. Grab it while you can
I am running RC 7100 and I have no problem syncing.
Only issue I have now is, when the phone is connected, it won't let me delete or replace any .xml files through file explorer. This was never an issue with XP and Active Sync.
i just found what the problem is. Open settings on phone, then connection tab, open usb to pc... and there uncheck (enable advanced network function)
With it checked it didnt work on mine win7
sipols said:
and there uncheck (enable advanced network function)
Click to expand...
Click to collapse
I had that problem when I first bought my TyTN II but it was because I was attempting to connect it to my ancient USB 1.1 ports on my Pentium III. As soon as I installed a modern (but cheap) NEC chipset USB 2.0 PCI adapter card, I found I could connect fine either with or without advanced network functionality enabled. This is a USB port hardware compatibility issue rather than a Win 7 issue and I suspect even if users have Win XP on the machine that behaves this way, they'd still get the exact same response.
your speaking about USB 1 when others is speaking about Win7. If you dont know win 7 is the newest MS OS. So, i belive, all who use win7 have USB2. So there is question why you mention usb1?
And i didnt sad whole story. I had used phone with win xp for long time with that check on, and with one cabler... now on win7 i tried 2 diferent cables with that check on. Didnt work. Took it off and it started to work. So its Win7 issue.
sipols said:
your speaking about USB 1 when others is speaking about Win7. If you dont know win 7 is the newest MS OS. So, i belive, all who use win7 have USB2.
Click to expand...
Click to collapse
Thanks for the explanation but my Pentium III is capable of running (or should that be walking) Win 7 RC and it has USB 1.1 ports (as well as a USB 2.0 card now). Given Win 7 RC was avail free of charge - don't know if it still is, I got mine in June, there'll be people who get it just to see what it looks like, even though the hardware isn't up to ideal spec.
I don't know what ports were being used in your case because as you mentioned, full details weren't supplied and we didn't have the whole story - we still don't know. Glad you've resolved the issue in your case but in a modern PC which can comfortably run Windows 7, I wouldn't typically expect this to be an issue. If the hardware is struggling to keep up or has USB ports of dubious quality/performance, then thats a different matter.
Sounds like win7 (my main OS now days) communicates with the USB ports in a different manner than XP or the other OS's. Good to know.
Hi, I'm running Windows 7 RC1, I've installed WMDC, it tries to install an unidentified driver which fails. My TyTn2 isn't detected by it either so I can't access the phone atall. Any help?
Hate to bump, but 47 views and no answer?
What win7
I have win7RC-64
Plugged in, downloaded active sync and installed perfectly. On your phone, there is a setting under connections I believe, under USB, and you have to check or uncheck the little box, something like allow connections over USB.
Check it.
Also, try running windows update again, it should work like magic
I have, I'm worried it might be a problem with the usb on the phone as it charges but it doesn't get picked up by my PC. I also tried activesync on Virtual XP and that didn't help. I've upgraded to retail Windows 7 aswell.
Iedbythereaper,
Microsoft does have an official Windows 7 RC Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assistance and feedback.
Jessica
Microsoft Windows Client Team
i had the same problem that it would charge but not connect just like you. i couldn't get it to work on both w7 and vista. the issue was bent pins in the usb port and after i bent them back it worked perfectly. see thread: Possible micro-USB failure problem!!
I've been using ADB the last couple of days to install apps on my Captivate and all of the sudden it stopped working today.
When I type 'adb devices' the phone comes up right away, but it shows offline.
I have tried reinstalling the drivers and Android SDK, but no luck. I've searched around and found some others with this issue, but haven't really found a fix that works for me.
Any idea why ADB would just stop working like that? I even performed a factory reset of the phone and put everything back to defaults.
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
wimbet said:
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
What the hell is that about!? I wish all these companies would stop trying to break from standards by proprietizing common cables.
I can't get the drivers to work. Where did you get yours?
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
Click to expand...
Click to collapse
Yeah I buy that, I couldn't even get the thing to try and connect at all with out switching usb connections on my computer.
stock cable works. I just rooted and ran into that problem. In order to get around it if you cant get a diff cable, make sure that b4 you connect your phone to your pc you turn off your internet so it doesnt auto dl the drivers. b4 u connect, dl the drivers for your phone from the root thread. Plug your phone into ur comp with the internet off and close any pop ups. Go to device manager look for the notification labled usb or captivateand right click and select update. Select search from file on disk or select file (something like that, i forget) and scroll and select the folder where you extracted the usb drivers. Make sure the checkbox that says search subfolders is checked and click next to install. two more drivers will pop up in device manager after u install the first one. Repeat the same procedure for both of them and then you should be able to use adb just fine to root.
Just wanted to further confirm that using a different microusb cable works! I keep reinstalling the drivers but it kept showing the device was offline. Then I tried my old Nokia N85 cable and it worked like charm! So weird how usb cables aren't made equally, unless Samsung designed the cable to prevent using adb?
I had this issue for a little while, but I installed the Samsung Kies software (which contains drivers) and uninstalled the ADB drivers I had originally downloaded. It's worked like a charm since then.
Go to SamsungApps.com and then use the canada site, as the software isn't really available in the US yet.
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
TimF said:
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
Click to expand...
Click to collapse
i've been able to install .apk's with my win7 64-bit ADB :O
all i did was install Samsung Kies.
i don't think i've ever had a problem...?
EDIT: i'm using the cable that came with it and no problems yet.
I'm running win 7 x64 and Kies did the trick for me. I haven't had a single issue connecting my phone since I did that.
Sent from my SAMSUNG-SGH-I897 using XDA App
Justa dding to the anecdotes.
I was having problems with the included cable using the front USB. It would show as Device Offline, also the charging wasn't very strong.
I switched to the onboard USB at the back of the case, and adb worked fine with the included cable.
Looks like I'll be picking up a couple extra USB cables so I won't have to continuously do the desk dive everytime I need to use it somewhere else.
1. I installed the kies drivers first and it would say offline when i checked the device through the cmd prompt.
2. I then installed the adb drivers and it then said the device was online.
3. i then rooted the phone and went on my way. i then tried it a second time and it said device offline.
4. nothing changed during this time except that i turned off debug mode, changed it to mass storage and plugged it back into the usb to transfer some files.
5. on returning to debug mode it no longer tells me the device is online. i have tried different USB ports as well.
6. i deleted the drivers, and reinstalled and it still says offline.
very frustrating.
wow. i forgot to try plugging it into another USB port. that worked. sorry about previous post.
I am running Windows 7 Home Premium 64bit on my laptop,
I installed the samsung 64bit drivers, it was an installer i found on the web, not the kies installer packaged driver one.
i changed my setting on my captivate to Mass Storage.
I mounted usb and everything works, by that I mean i was able to ADB like no tomorrow without any issues.
Then I made the mistake of installing Samsung Kies and that messed up my previous drivers and I wasnt able to ADB to my phone. I had to uninstall Samsung Kies and my phone still wasnt being found I still couldnt ADB.
my solution to fixing was restarted my phone and computer, without my phone connected to USB i re-installed the Samsung 64bit Driver Package, then hooked up my phone made sure Mass Storage was selected and Mounted USB and bam was able to ADB again.
hope this helps! also i have been doing videos helping people with issues with samsung's captivate on youtube, youtube.com/johnnyzappone if anyone wants to check em out, if anyone has any suggestions please let me know and id be happy to release a video!
I resolved my issues, I plugged the stock cable into one of the rear usb ports and the device is now available on my main PC Win 7 64 bit.
wimbet said:
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
I have windows 7 and mac osx and I can use adb with both using the stock USB.
i have debugging active.
lol @ the samsung cable.
i've 2 indentic cables here, one doesn't work. plugged in the other one and this one works...
maby its just a strange issue on windows, next time try to pull out the cable and put in back in then connect your device again this should work.... :s
because earlier the cable just worked fine and now it doesn't.. so good luck xD
joelpt said:
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
Click to expand...
Click to collapse
also can confirm PITA
hey people,
I know I am writing about a known topic since I have been looking on the internet for hours, however I'm absolutely not finding the answer, it is so frustrating. Hope someone can help.
I connect my diamond touch (WM 6.1 pro, thanx to xda dev) to my freshly installed windows 7 utlimate on my iMac 27". It simply doesn't connect. I managed to install windows mobile device center, but it does not recognize my phone. I can connect mounting the phone as disk, but I want to sync. When I use active sync the computer sees it either as a generic RNDIS device (fast transfer checked on in pc-usb connection) or as unknown device (fast transfer checked off). For both it cannot find a proper driver when windows start looking for it! I have tried everything so far. Reinstalling WMDC, restarts, reboots, change usb ports. I don't know what to do anymore, please help me.
Best regards,
Barbet
Win7 mobile center, need install a driver.
drvupdate-x86.exe
you can search this file. I don't know why I can not put in the link.
Hmmm
Did that driver thing work? I didn't have any problems connecting from a PC. Are you using a VM or have you installed windows 7 on your mac? Try using a virtual machine.
Windows 7 by default do not recognise a lot of phone, you need mobile center to make it work, on microsoft.com -slash- windowsmobile -slash- en-us -slash- downloads -slash- microsoft -slash- device-center-download.mspx
thanx so much for your replies, however my problem is still not solved. I really don't want to use any viritual windows versions on my mac, it was a cramp to install it via bootcamp. I made sure all drivers were correct and all my hardware is working. Still problem is not solved. I have installed media pack, i have installed and reinstalled WMDC multiple times, i have installed any updates possible, i have tried different settings on my cell. Either i get: generic RNDIS driver not availible or i get generic serial driver not availible (serial doesn't even make sense, it is a usb connection). Anyways, i really really really want a solution.
btw, drvupdate-x86.exe is for 32 bit, i have 64 bit, i used drvupdate-amd64. It is properly installed.
Ow and i tried to deinstall WMDC update to reinstall it, but it was not possible to deinstall it!!! It deinstalls to 99% and then the process bar runs BACKWARDS. I didn't even know it was possible running these bars backwards. It certainly confirms why I prefer mac.
This will sound really dumb - but make sure you try it with the USB cable the phone came with. I was having problems for days until I tried a different USB cable... and there you go.
i will try again, but i remember trying similar things, also switching usb port, i tried didn't work
edit:
i did as you said and doesn't work
it does appear properly as disk if, but the moment you select 'active sync' it doesn't appear anymore,
i hear the sound that confirms the connection, and in the devicemanager i can see the device but with a warning that the driver is not installed
i have to edit first post, i am running wm 6.5, sorry, maybe this gives an anwer?
i think a solution can be in the WMDC driver update
i think i should uninstall it and reinstall it with my htc pluged in
however i can't uninstall it as i said before
i read that 'undocumented service' is necessary, however can find what it is
uninstalling via 'remove programs' doesn't work, neither normal or in safemode
someone help me further?
Hello XDA developers / forum users,
Finaly I've buyed myself a (very) nice phone: The Samsung Galaxy Note GT-N7000 .
I'm really happy with it, but I've a smal problem with connecting my phone by USB to my Windows 7 64bit computer. I can't get it working.
Not with Kies, not with installing just the driver, nothing seems to help.
Hopefully someone overhere has had the same problem which has been solved already ......
I've searched your forum and also the internet for the solution and/or work arround, but couldn't find anything what helped.
I'm sorry when I've missed the topic on your forum, if so please post the link.
I hope someone can help me out with this isue,
Thanks in advance,
nldark
http://forum.xda-developers.com/showthread.php?t=1424997
Read first few line of main post, you will find both 32/64 bit driver
Sent from my GT-N7000 using xda premium
Thanks dr.ketan for your reaction,
Unfortunately it's still not working ....
By the install procedure it says:
USB Device Not Recognized
One of the USB devices attached to this computer has malfuntioned, and windows does not recognize it. For assistance in solving this problem, click this message.
When I do this it will try to install again the driver, but it says that it has already the latest driver. Nothing helps, uninstall, reinstall.
In the device manager it shows up under Universal Serial Bus controllers as: Unknow device.
What else of suggestions do you have?
Any help would be apreciated .....
I had issues too. Sometimes it would take forever to find the driver and sometimes in errors out.
After you installed Kies. Go to device manager and find your Samsung device. Usually will have the yellow caution triangle next to it. Right click change drivers. Do not let Windows search. I don't know the exact wording off hand but you want to get to the point where windows will let you select from a list of devices. Scroll down to Samsung and select. That's what worked for me.
Hi there again,
With a samsung galaxy s, is connecting easy does it with my windows7 64bit computer.
So in my opinion it really has to do with the driver.
I have also tried to connect to a XP computer (with my note), what also works fine.
Does anyone have an idea?
Sent from my Samsung Note
Uninstall kies, Just reinstall isolated driver.
If you connecting device with Extension cable, remove it, N connect direct to USB slot of main board(back side)
once it recognise, you can reinstall kies.
I'm having problems with drivers too but with the bluetooth driver. My laptop can't recognize my Note's bluetooth. I was able to install the driver before but the problem came up when I reinstalled windows. I have windows 7 x64 home premium installed. I can send and receive files though after pairing, but I need to manually click the send and receive options in my computer unlike before where I can send and receive files automatically.
Thanks Dr. Ketan,
Since I put my USB cable at the backside from the computer it recognized my telephone
I tried this also with an USB extension cable, but as you said already this isn't working!
I tried also again the front USB connector, but with that connector my telephone won't still be recognized, so I buyed a long cable and will use from now on the back side USB connector!
Thanks again for the good work,
No Kies..... AAAAArrgghh
I read so many threads to disable USB debugging, reboot (with/without SIM/microSD), uninstalled all USB and BT from PC (W7-X64) uninstall/reinstall Kies, and still KIES gives me this message not to be able to connect to my N7000.
There was a little KIES update which started to ask for the right phone, but the N7000 was not even listed!. Took me an entire day!
What a nightmare! Al other phones I have used worked like a charm to connect and sync. Here I sit with a 500 Euro Galaxy Note which even does not have my contacts!
To add to this (it being an appropriate thread),
I have Note and win7/64 and connections was fine with Keis installed but not running i did not have any problems until last week, when suddenly i could not read the micro USB card nor copy files from the phone.
After much mucking about, deleting drivers and reloading etc, i stumbled across a thread somewhere that suggested unmounting then mounting the SD card.. this worked.
Note and windows 7 32-bit
it works perfectly with XP Pro (synching and note being recognized).
While I try to do the same thing with windows 7 (32 bit) I does not recognize the note (I have installed the driver from : http://forum.xda-developers.com/showthread.php?t=1424997)
I have dismounted and mounted back the microsd card. Still not recognized. It only says that the driver has been installed, that the usb connection is working fine but the note is not listed in device manager nor I can synch anything.
Any ideas?
Mystic38 said:
To add to this (it being an appropriate thread),
I have Note and win7/64 and connections was fine with Keis installed but not running i did not have any problems until last week, when suddenly i could not read the micro USB card nor copy files from the phone.
After much mucking about, deleting drivers and reloading etc, i stumbled across a thread somewhere that suggested unmounting then mounting the SD card.. this worked.
Click to expand...
Click to collapse
reinstall kies then use a different usb port i too use win 7x64
I have uninstalled Kies wifi and disabled kies air. Which should I reinstall ?
I completely abandoned KIES as it is a nightmare.... for a few euro I bought something called Mobisynapse, which seems to do the job alright, although it is rather simple in its functionality.
(Unbelievable Samsung making nice products but this crappy s/w.)
sayborg said:
I have dismounted and mounted back the microsd card. Still not recognized. It only says that the driver has been installed, that the usb connection is working fine but the note is not listed in device manager nor I can synch anything.
Any ideas?
Click to expand...
Click to collapse
Along the way I've had to play about with several things quite often to get the connection working. See: this (the whole thread discusses this sort of connection issues); in this thread several of the problems I posted turned out to be related to USB ports and drivers.
Basically the variables are, as far as I can see:
- on the device side, USB debugging (see this, third bit) and neighbouring posts, and USB connection mode (see above)
- and on the pc side first the USB drivers, which you have already downloaded. I can make a connection using both Kies drivers (though I tend to agree with Eira007 here about their temperamentality) and Samsung USB drivers. BUT they won't co-exist. I have two separate (multiboot) instances of Windows 7 with Kies on one and Samsung drivers on the other! And then on the PC side finally the USB port you use. The drivers won't work with just any USB port, "kieskeurig" I would almost be tempted to say (sorry, Dutch joke). Most people (as in this thread) stress the importance of using a USB port at the back of the computer. However, in my rooting quest (see above) I actually discovered that connection via a USB port at the back of the computer didn't work but that connection via a USB hub did. So my experience is that with these four variables it's very much a case of "your mileage may vary" as they say, although the experts definitely advise no hub or USB extension cable and a rear side USB port. I would advise you to play around with the variables until it suddenly, magically works, keeping in mind that you can't install Kies and ordinary Samsung drivers together. Also, when removing one driver and installing the other you have to do a very thorough deinstall first (remove all related files and registry references) and a clean reinstall, otherwise Windows will just say, as mentioned in this thread that "the latest drivers are already installed". Incidentally, with Kies the Note appears in Windows explorer as one device, but with Samsung drivers the two SD cards appear as two separate drives. Finally I found that Kies takes a good while to respond and recognise the Note, and sometimes you have to go through the "Troubleshoot device connection" procedure several times before Kies suddenly wakes up and finds the device. (I'm not 100% certain about the label on the button as I'm not on my sync PC at the moment.)
Eira007 said:
I bought something called Mobisynapse
Click to expand...
Click to collapse
Thanks a million for pointing me to this. The reason I went to such lengths to keep Kies was because I couldn't find anything else that would sync my contacts, tasks and schedule with Outlook over USB. I'm going to check this out!
Guys,
I don't understand why we have to install Kies. With my laptop at home, Kies is not installed, it recognizes the phone (internal memory, and microsd) without any issues.
At the office I have Win 7 (32 bit), this is more recent than XP Pro however it does not work.
The Note should be detected without any softs (Kies etc)...
As I said, you don't have to install Kies, but your system does need drivers for the device, be they from Kies or wherever. Windows includes its own versions of lots of drivers, and it may be that your installation of Windows XP has drivers it at least "thinks" are the right ones for the device, whereas your installation of Windows 7 doesn't. And this wouldn't be the first time Windows 7 failed to do something that XP did OK.
I called the Samsung Benelux support yesterday. They told me to turn 2 features on in control panel/applications: Microsoft.NET Framework 3.5.1 (check 2 boxes). Then install Kies and then plug the usb cable. Tried it several times, does not work...
What do you need to do?
Kies = drivers + software to sync Note with PC (among other things);
Just drivers = if you (say) want to connect to your Note with PC Odin.
Kies indeed requires .NET framework if I remember correctly. But if you just need to "see" your Note's file system from the PC (like with PC Odin) then installing Kies is probably more trouble than it's worth.
Mobisynapse, suggested by Eira007 several posts ago, will also have to install drivers to work. I haven't got it yet as I'm still trying to get the website to accept my credit card.
Sorry to ask but what is PC Odin ? What does it do ? I just need my Win 7 laptop to see my Note. Currently it does not. I have tried with/without Kies and Mobisynapse. Still does not work. XP Pro sees my Note without any softs.