Dear forum,
I've followed the instructions to make iGO8 work on my Diamond, found in this forum, completely and iGO8 works well.
The only thing, rendering it unusable for me is that when entering the address search mode and clicking on "select street" the field where I usually enter the street name gets spammed by "å" chars constantly. I tried everything, uninstalled everything except TouchFLO.
Is this problem known?
The iGO8 version is 8.3.2.80621.
Thanks in advance
panni
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
this problem too can be solved, by using in settings for backlight, you have to use option "use same as device" and no problem, or in settings.ini , add number 2 for power option - this one i discovered with myself
Greetz
thanks for info
i ll try it
l.
sucro said:
this problem too can be solved, by using in settings for backlight, you have to use option "use same as device" and no problem, or in settings.ini , add number 2 for power option - this one i discovered with myself
Greetz
Click to expand...
Click to collapse
Ah, thanks for the tips, interesting.
That explains the strange behavior on "always on"-mode, I guess the iGO guys constantly spam control chars, which normally shouldn't be handled by the input boxes in the street view, to overcome backlight/power management of the device.
mediaworld2007 said:
thanks for info
i ll try it
l.
Click to expand...
Click to collapse
You are welcome
exactlier you can change this line in sys.txt
[power]
powermgm_state=0
with this
[power]
powermgm_state=2
panni said:
Ah, thanks for the tips, interesting.
That explains the strange behavior on "always on"-mode, I guess the iGO guys constantly spam control chars, which normally shouldn't be handled by the input boxes in the street view, to overcome backlight/power management of the device.
Click to expand...
Click to collapse
You are welcome, i'm sorry for my bad english, cause it's not my native language
you are right, it's very stupid, that is input boxes linked with power managment
Greetz
panni said:
Dear forum,
I've followed the instructions to make iGO8 work on my Diamond, found in this forum, completely and iGO8 works well.
The only thing, rendering it unusable for me is that when entering the address search mode and clicking on "select street" the field where I usually enter the street name gets spammed by "å" chars constantly. I tried everything, uninstalled everything except TouchFLO.
Is this problem known?
The iGO8 version is 8.3.2.80621.
Thanks in advance
panni
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
Click to expand...
Click to collapse
Thank you! I had exactly the same issue!
Thank's for this information
panni said:
Dthe field where I usually enter the street name gets spammed by "å" chars constantly.
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
Click to expand...
Click to collapse
Man you really saved my day.
Thank you oh so much!
panni said:
Dear forum,
I've followed the instructions to make iGO8 work on my Diamond, found in this forum, completely and iGO8 works well.
The only thing, rendering it unusable for me is that when entering the address search mode and clicking on "select street" the field where I usually enter the street name gets spammed by "å" chars constantly. I tried everything, uninstalled everything except TouchFLO.
Is this problem known?
The iGO8 version is 8.3.2.80621.
Thanks in advance
panni
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
Click to expand...
Click to collapse
I had exactly the same problem, only that this solution didn't work for me; The solution to set change the power setting from 'backlight always on' to 'use device setting' did work though. So, thanx!
I had the same problem and many thanks for the solution, it works perfect
Thanks
Thank you all for sharing this, it's working fine for me with changing the configuration file from data.zip . Stupid bug
sucro said:
this problem too can be solved, by using in settings for backlight, you have to use option "use same as device" and no problem, or in settings.ini , add number 2 for power option - this one i discovered with myself
Greetz
Click to expand...
Click to collapse
Thank, sucro. You da man.
thank U !!!!!
tried to fix that one for weeks...
thanx alot for this post, had the same problem on my Jade, all working now...
thanx 8))
Related
Anyone else? Open a message (any type) and it opens at the bottom of the message, so that I can't see the message or who it's from without scrolling up. It's annoying!
Also, if I use the D-pad to scroll through the messages, each message opens up in the same manner - at the bottom.
Is there a fix for this?
Thanks,
FrankyG
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Mark Crouch said:
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Click to expand...
Click to collapse
Thanks for the reply , twice
Can anyone with a stock TyTN confirm what the default registry setting is?
Thanks,
FrankyG
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
patr!k said:
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
As do I, and I still have the problem after checking my settings. Can someone give us an answer on how to fix this issue?
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
patr!k said:
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
Click to expand...
Click to collapse
Huh? Could you explain a bit less cryptically?
Thanks a lot for the hint! I love this forum!
Quick GPS send 'connection failed' message when I tried to refresh data. It is done through AS and 3G as well. Any correct solution?
Mikus
So, I don't have this problem but I know how to fix it because I've read all the pinned topics. Just for kicks I ran a search of "QuickGPS failed" and what do you know, I found the answer. Just a tip.
vanydotk said:
So, I don't have this problem but I know how to fix it because I've read all the pinned topics. Just for kicks I ran a search of "QuickGPS failed" and what do you know, I found the answer. Just a tip.
Click to expand...
Click to collapse
Then you see too: there are a lots of threads about it. Can you imagine, why? If you really found the solution for our problem, please tell it for all of us. Just a tip...
Mikus said:
Then you see too: there are a lots of threads about it. Can you imagine, why? If you really found the solution for our problem, please tell it for all of us. Just a tip...
Click to expand...
Click to collapse
Looks like you need another tip, start with the thread that says "quickgps on the kaiser *FIX*"
While you're at it, watch this video
http://www.albinoblacksheep.com/flash/posting
Use Kaiser Tweak to fix the Quick GPS problem
1.Download the Kaiser Tweak
2. Look for Tools (in the Kaiser Tweak), select the 'Default QuickGPS Setting', select 'OEM Settings (Def/Adv)'.
I hope it will work for those who is having such problem
All the best
vanydotk said:
Looks like you need another tip, start with the thread that says "quickgps on the kaiser *FIX*"
While you're at it, watch this video
http://www.albinoblacksheep.com/flash/posting
Click to expand...
Click to collapse
Smart video, I liked it, however the solution for my problem came from the very next post from 'ediirwan' - without any briefing tune. Peace
i hope it is working for u 'mikus'
Solve problem on HTCTP CDMA Sprint
Hi, I had this problem.
The solution:
Start->Settings->Phone->Services->Location->ON
Good luck.
try to check if quickgps service is started. mine was stopped.
to view services list use some program like fdcsoft taskmanager
found this thread in general but nobody response to it there..so i just wonder maybe somebody can help..i am having the same problem...
Hi all,
I am posting a thread after 3 hours of checking the internet to see if others report the same bug.
I am currently using a Kaiser with WM6. Just to describe my problem, when i enter the SMS application (mailbox) and i click on an SMS to read it, the bottom of the page is displayed first (usually blank screen), so everytime i need to use the scroll bar to see the message content which is on the top of the page.
I know it is not a major issue but it's still really annoying. As i said i have been looking everywhere but so far with no chance. This might be a registry problem, maybe caused by the installation of a program, but i don't have anything fancy on my mobile so far.
Anyway, thanks in advance for your help.
Bye
Please search these forums before posting a thread. This has been addressed multiple times on this forum. Solution is to disable d-pad navigation in the pocketIE section of kaisertweak.
Known issue:
Have you Kaiser Tweak installed? Disable D-Pad Scroll Navigation for PocketIE,
beause this tweak causes that behaviour.
This will solve the issue.
Greetz,
Hans Olo
That is a known issue when you have installed KaiserTweaks and enabled D-Pad scroll navigation for PocketIE. Just set that value to Disabled (Default) and problem solved.
hans_olo said:
Known issue:
Have you Kaiser Tweak installed? Disable D-Pad Scroll Navigation for PocketIE,
beause this tweak causes that behaviour.
This will solve the issue.
Greetz,
Hans Olo
Click to expand...
Click to collapse
Beat me to the punch.
jwbrint said:
Beat me to the punch.
Click to expand...
Click to collapse
My excuse is that I wrote it at the same time as sWuRv did.
What is yours?
thanks alot guys..problem solved...
you'e rock!!!!
hans_olo said:
My excuse is that I wrote it at the same time as sWuRv did.
What is yours?
Click to expand...
Click to collapse
No Excuse
Hey guys, I'm wondering if anyone has experienced the following before (I can't find any mention of it in various Kaiser FAQs etc)?
When I click on an SMS (and possibly MMS and E-Mail) the device automatically scrolls way past the bottom of the content and I have to manually scroll up to actually read it. I could understand it doing this if I was replying to the message, but I'm just clicking to view it.
I've experienced it on a couple of ROMs now - Dutty's dualtouch and Kaiser release so it seems to be something deep-rooted in the OS / messaging software.
Attached is 3gp video which demonstrates the problem. The quality is real bad but it's enough to see what's going on.
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Deframe said:
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
Click to expand...
Click to collapse
A quick search is the best help that I can give you at this point.
Audio said:
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Click to expand...
Click to collapse
Thanks for the quick response but disabling that doesn't seem to make a difference
Same Here
I'm having the same problem (versions below). Any ideas?
hmmm... it should work... Are you sure you disabled it? Just to show you I didn't just make up a solution , here is a link to another thread which states that disabling d-pad navigation should solve the issue...
http://forum.xda-developers.com/showthread.php?p=1778601&highlight=text+bottom+screen#post1778601
Deframe said:
Thanks for the quick response but disabling that doesn't seem to make a difference
Click to expand...
Click to collapse
just wait a few seconds and than soft-reset!
this solved my problem!
steph
Success
Tried it a second time and this time it worked. Thanks Guys.
Problem occured also in my loved Tytn II.
It is a good news, Thanks U
yep - worked for me too.. thx Audio
thanks, disabling the PIE Dpad navigation tweak fixes the problem...
Soft reset did the trick, thanks all!
Same here! initially i too had problems that after changing it in KaiserTweaks, it still behaved the same, but the wait and then softreset did the trick!
Thanks a lot!
I have a problem with SMS composing and searching provided no solution.
I start a new SMS and when I fill "To" field I press TAB to get to the message field. But nothing happens.
How to correct this? I have SMS threading disabled.
Thanks for your help.
its a touchscreen device
umm... so how about pressing down arrow then??
br
bro
Hi there
I too suffered this very same problem, I fixed it by installing KaiserTweak and disabling the D-Pad Scroll navigation under Pocket IE, as instructed by Raiisak in post #123 in the following thread...
http://forum.xda-developers.com/showthread.php?t=398050
Cheers again Raiisak!
bronx said:
umm... so how about pressing down arrow then??
br
bro
Click to expand...
Click to collapse
No, I tried all other sensible keys and combinations.
p.dixon0 said:
Hi there
I too suffered this very same problem, I fixed it by installing KaiserTweak and disabling the D-Pad Scroll navigation under Pocket IE, as instructed by Raiisak in post #123 in the following thread...
http://forum.xda-developers.com/showthread.php?t=398050
Cheers again Raiisak!
Click to expand...
Click to collapse
That did it!
Thanks a lot and thanks also for the link.
Not a problem mate Glad to help!!