hi there i have just put wm6 to my xda 2s it loaded fine but i cant use it propaly when i click on start it does not bring anythink up also the youchscreen is in diffrent place for things any idea what ive done wrong
ok, if i get you right, your screen is mis-aligned, that means that where you click is not, what windows thinks you clicked.
1. make sure, this is not a temporary hardware issue, try and clean the screen as good as you can, especially look for dust around the borders and remove it.
2. try "MyMobiler" it is a freeware remote software, with which you can control your device with your pc's mouse and keyboard, if that works properly and still the stylus does not work...
3. use the mouse to navigate to start -> settings -> system -> screen and click "align screen" and re-align it using the stylus and if that doesn't work...
4. go here:
http://forum.xda-developers.com/showthread.php?t=355010
and try to align you screen remotely
if all that didn't work
5. hard reset your device or flash another/the shipped rom
and if still nothing helped, you gotta change the digitizer of your screen, but i don't think so, because an upgrade doesn't distroy hardware, but it could accidently have happened at the same time
Wm6 radio problems
hi there managed to get my wm6 working on the xda 2s but the radio rom does not work if i do a soft reset it works but if the battery comes out it does not work also my wifi wont connect to a wifi network just keeps saying available
answered by pm
Related
I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*
Hi, Well i came here and found WM6 install for the BA and so i go and try and install it, i think nothing of it. Then the installer comes up saying that it cant detect my phone so i go and look at my phone and Its just a gray screen with Serial at the top and V 1.02 at the bottom. Man, i just got this phone and im hopeing i didnt screw it up already =/ this freaking sucks. Can anyone help me please
Are you using USB port to connect your phone? If you are your usb connection is not working because it will show usb on the screen rather than serial. Need to check your usb connection if you are using usb.
Well, it says that when i got it conected to the dock, But serial when its off.
If it says that then the usb connection is AOK.
Hmm... You mean you havent installed it yet?
Try "Hard Resetting" then reDo the process of Upgrading step by step... maybe you missed something.
I think that as long as your bootloader is intact. You can install your OS definitely, I think, correct me if im wrong. coz that happened to me and i revived my BA.
Well it was just an installer, I ran the .exe and it was like "Installing WM6!!" then it just cut off and did this crap. So is there annother way to install it? did i do something wrong?
Well i tried "Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner)." But the screen lights up and then goes blank then it pops up with the serial jazz. I hope i can get this fixed because i cant afford a new phone.
Try pressing/hold the (Record Button) + (Power Button) Then Stick the (Reset Button)...
that'll make it go into the Interface Mode(Bootloader) that's either Serial or USB... then try to flash it again.
Well, I do that and the screen does the same thing, when i hook it up to the dock it does the famose xp Bedunk sound saying it knows something is conected. How do i install the thing again if active sync cant find it?
Okay, well i went to try and install it anyways and it seemed like it worked... why do i have such bad luck?
Well now after it was complete n i did the soft reset, It has 4 big bold Color lines, and at the bottom it says
No GSM
D 5.60.00 WWE
=/ whats that mean? Im too damn young for all this technical crap man, any help, please...
Hey xXBuddahXx
It-s all good... Just reset the device pushing the pin with the stylus and everything will be fine...
Anyway, like SilverSamurai said..., if you can get into bootloader mode then you're fine...
Make sure you upgrade using the MaUpgradeUt_noID app and follow carefully the instructions step by step: http://forum.xda-developers.com/showthread.php?t=326532
My first upgrade to another 2003 firmware was a nightmare and many times I've felt my heart pumping like it was gonna burst just looking at my beloved BA not booting... And since I think I installed almost every ROM I could get my hands on.
My advice, try again cos Helmi's WM6 Pro really rocks and it's the most stable I've seen so far...
Good luck,
Brice
I noticed on the Hermes page there is a HTC Home version 2.1 available for the Hermes that has been patched.
Is this available for the Kaiser? Noticed for a number of them it states uninstall previous version, but I dont really have the option to on my Vario 3.
I would like to know this too. Is there any info about it?
It works just fine.
So installing 2.1 the hermes version from:
http://forum.xda-developers.com/showthread.php?t=327646
Will be ok?
How can you check your current version?
Electronic Punk said:
How can you check your current version?
Click to expand...
Click to collapse
htc home customiser by pocketemu.com will tell you what verision of htc home you have.
Jygar said:
I noticed on the Hermes page there is a HTC Home version 2.1 available for the Hermes that has been patched.
Is this available for the Kaiser? Noticed for a number of them it states uninstall previous version, but I dont really have the option to on my Vario 3.
Click to expand...
Click to collapse
Is it a official release? Dont wanna have "self-made" junk..
Bram87 said:
Is it a official release? Dont wanna have "self-made" junk..
Click to expand...
Click to collapse
then you won't get much, everything here is ripped from other roms and updated to fix bugs or enhance the original design. The original HTC Home had many issues such as weather was only for Euorpe, the email link never opened the correct folder, it would jsut open whatever was last opened, and there were other issues too. Someone fixed those issues, repackaged, and posted here. HTC HOme 2.1 fixed the weather app to allow any city to be added to the weather XML file.
Note: HTC Home is an offical release, but slightly modify in ver 2.1 with help from some of the users here.
I dont know what I would do without the "self made junk" it all works fantastically!
Well I will be looking to install 2.1 tomorrow over my vario 3 htc home 1.5.
Hey, I have a novel idea, lets all show up, start posting, and insult the developers and cookers here (who absolutely kick the arses of the OEM developers) and accuse their intense and brilliant efforts as being "home made junk".
I bet we get A LOT of good advice and help!
ALL ABOARD!!!!!!!!!!
Ok. lets not fight.
Does it or Doesnt it work for the Kaiser. Has anyone installed and tested it?
Does it work properly? are there any delays (processing wise)?
Does it actually make a difference, do you see and feel a difference?
Would you recommend it?
bluemamba said:
Ok. lets not fight.
Does it or Doesnt it work for the Kaiser. Has anyone installed and tested it?
Does it work properly? are there any delays (processing wise)?
Does it actually make a difference, do you see and feel a difference?
Would you recommend it?
Click to expand...
Click to collapse
It DOES work with Kaiser.
It DOES work properly, no delays.
Hm.. tricky one
Yes.
gabriel31337 said:
It DOES work with Kaiser.
It DOES work properly, no delays.
Hm.. tricky one
Yes.
Click to expand...
Click to collapse
Thanks for your answer
Aye it does work, god bless the cookers!
So, which one do you intall on a kaiser?
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
or
2. Install on HTCHome with NO Brightness Fix
in my Kaiser Home 2.1 wil not install. Certificate Error or deny permission is the "error code".
Both on phone memory and Storage card
HELP!!!!
help needed, i have broken my htc touch phone...
first i downloaded the htc home v2.1 hermes cab and installed it , which all went fine but then i noticed that the brightness tab was working so i went and downloaded HTC Home v2.1 Directory And Brightness Fix and thats when things went really bad.
my phone rebooted and the screen turned off. when i plugged it into the pc after a timeout the screen came back on but if i touch it instead of getting brighter it turns off until it timesout again.
i un-installed both versions via the pc (although the UI didnt go back to the old 3 button tab home screen - still has 6)
this time a little better , screen does turn off when i touch it but it doesn't turn on either when i push the on button at the top until after the timeout.
dont know what to do now?
jimmypop said:
help needed, i have broken my htc touch phone...
first i downloaded the htc home v2.1 hermes cab and installed it , which all went fine but then i noticed that the brightness tab was working so i went and downloaded HTC Home v2.1 Directory And Brightness Fix and thats when things went really bad.
my phone rebooted and the screen turned off. when i plugged it into the pc after a timeout the screen came back on but if i touch it instead of getting brighter it turns off until it timesout again.
i un-installed both versions via the pc (although the UI didnt go back to the old 3 button tab home screen - still has 6)
this time a little better , screen does turn off when i touch it but it doesn't turn on either when i push the on button at the top until after the timeout.
dont know what to do now?
Click to expand...
Click to collapse
No idea what you did. Just back everything up without touching the screen and perform a hard reset. Hopefully you have an automatic installer when rom boots back to its original state.
can some1 test if igo8 is working nog with this home version?
thnx
NoFatePPC said:
can some1 test if igo8 is working nog with this home version?
thnx
Click to expand...
Click to collapse
This home version is probably cooked in the rom you're using.
Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.
What you need to do is fully charge the phone, run a backup usin PPM or sprite then do a soft reset and leave it for a day, if that doesnt workt hen run a hard reset and it will fix it, been through that problem too a couple times and it ends up workin fine
Thank you
Thanks a lot. but please tell me when you say to leave it for a day i should leave it with baterry in or out. Or do you mean to do the soft reset and leave it for a day to the screen where it sais to tap the screen. And by a day you mean 24h?Thanks again anyway
Ok.But where can i find a new lcd? And how much is it one?
I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
i flash the ori rom n change lcd n ribbon but still cant do the alignment on touch screen n get into the menu try the board n put it in another p4550 still cant touch screen,is it board problem ?
i have the same problem
i think its a hard problem i try everything but nothing
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
I had prob woth touch screen and non functional front camera. Restored function by replacing flex cable. This flex cable has the buttons for the keypad as well as supporting the front camera. When I examined the flex cable, the portion that moves in and out when sliding the keyboard appears to be slightly damaged on right and left sides. The damaged portion does contain very thin circuits.
Not sure why this was posted in Accessories but I'll move it to General for you.
Hey there everyone, thanks for taking a look at this post and (hopefully) someone can give me a bit of advice on the following problem:
I got an HTC Pure through ebay for a friend, said it had a touch screen problem (usually no problem, I just replace the digitizer when I see it). However, after I installed the new digitizer, the touch screen doesn't work except after doing a hard reset, and ONLY works with the touchflo moving through the different categories (left to right and vice-versa). Only the top half of the screen works, and it looks like it's controlling what should be the bottom half of the screen. I'm unable to get into the screen calibration settings because if I move out of the original touchflo screen (i.e., hit the hardware windows button or another hardware button) then there's no touch screen responsiveness at all. I already flashed an original stock Pure ROM, still no difference than before. My question is thus:
1. Can the screen calibration settings be accessed through a registry editor? And if so, can anyone provide some better settings?
2. Is this just a hardware problem and can't be fixed through software tweaks? Would flashing a different ROM possibly help?
My goal is to eventually unlock the Pure and install a Spanish language ROM, but I'm not going to put more money into the phone unless I can actually use the touchscreen correctly.
Thanks for any response!
Get an emulator such as Pocket Controller or My Mobiler and access the screen via your PC.
Run the screen calibration and see if that fixes it, if not its likely hardware related.
Not sure where in the registry calibration setings are but you should be able to find it with a search.
Thanks, I'll try that and I sure appreciate the quick response. Can't do it today but if it works I'll post and let everyone know how to fix it if they somehow encounter the same problem. Thanks again!